Construction of public toilet at AD colony in ward no. 13 North zone. Roc.No.2605/2023/MD5

Amount

2. Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceed

3. Filling with M sand layer by layer cost including watering and consolidations etc. complete

4. Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm gauge HBG stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, etc., complete complying with sta

5.Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. Sl.No.122

6. Supplying and erecting Centering for sides and soffits including supports and strutting up to 3.29m high for plane surfaces such as RCC slabs etc., in all floors with all cross bracings using mild steel sheets of size 90x60cm and BG 10 stiffened with w

7. Supplying & erecting Shuttering including necessary supports for plane surfaces such as Vertical surface etc., in all floors using mild steel sheets of size 90x60Cm & BG 10 stiffened with welded mild steel angles for boarding supported by Casuarina pro

8. Supplying and erecting Shuttering including necessary supports for plane surfaces such as Drain walls etc, using mild steel sheets of size 90x60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarinas props at suitabl

9. Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification.

10. Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm gauge HBG stone jelly for All RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing etc., complete and

11. Plain cement Concrete in1:2:4 mix (one cement, two sand, four metal) using 20mm size Hard Broken stone as per the direction of departmental officers etc. completed.

12. Brick work in cement mortar 1:5 (one cement and five sand) using best quality of second class (chamber burnt ) bricks of size 9"x43/8"x23/4" for the following including curing etc., complete complying with standard specifications. (Masonry projection

13. Special ceiling plastering and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (one cement and three sand) 10mm thick and including hacking the surfaces and pro

14. Plastering with cement mortar 1:5(one cement and five sand) 12mm thick in all floors complying with standard specifications.

15. Dadooing the walls with white colour Glazed tiles of best approved quality ion cement mortar 1:2 (One cement and two sand) and pointing with the same colour cement neatly to full depth of tiles in all floors as directed by the departmental officers an

16. Flooring with scratch proof Ceramic tiles of approved quality and colour of size 305*305*6 mm in all floors over 20mm thick C.M. 1:3 (one cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colou

17. Manufacturing and supply of RCC pre cast slab 75mm thickness including moldings charges etc

18. Hoisting the pre cast slabs placing in position including pointing with cement mortar etc.

19. Supplying and fixing in position white glazed Orrisa pattern Indian water closet of size 580x440mm, P or S trap of approved quality confirming to IS 2556 - part XI with sand cushion and forming flooring all-round the closet using 40mm broken brick je

20. Providing and fixing solid panel pvc door with frame including Transportation Charges etc Complete, as per directional of departmental Officers

21. Providing and fixing M.S. Grill gate with using allround 'L' angle for frame, patta and using 18 gauge MS plate for shutters with necessary hinges, tower bolt and locking arrangements complete including applying a priming coat of approved steel prime

22. Painting with Plastic Emnulsion paint two coats along with base m coats of approved quality (ISI standard ) paint as per the standard specification(The paint to be used should be got approved by the Executive engineer before use on work).

23. Painting Iron works for doors, windows & Ventilators, Iron bars, Weld mesh, wire mesh, screen, steel bars, flats and other similar works etc., with TWO COATS of approved first quality of synthetic enamel paint over the existing red oxide primer in all

24. Wiring with 2 x 1.5 sq.mm (22/3.0) PVC insulated unsheathed SC Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A swit

25. Wiring with 2x1.5 Sqmm(22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150x100x113mm TW switch box with 3mm thick Hylem sheet cover

26. Supply and run of 2x6 sq.mm PVC insulated SC unsheathed for service connection main

27. Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion w

28. Supply and fixing of single box type 4'40W flu fitting complete with copper choke and condensor with TW round blocks on wall of ceiling with flu tube with PVC unsheathed Copper leads form terminals to the SD 83

29. Supply and laying of 2x10SQ.mm P.V.C armored LTUG Cable in a Trench to be excavated at a depth of 0.75mtr covering the cable completely with brick and sand and refilling the earth to make good S.D.192

30. Supplying and fixing in position of the following G.I. specials (Heavy type) of approved quality and good variety excluding the fixing charges but including necessary cutting and threading of G.I.pippes for jointing the G.I.specials and providing two

a) 2” dia GI pipe

b) ¾” dia GI pipe

c) ¾ “ dia GI elbow

d) ¾ x6“ dia GI barrel nipple

e) 2” dia Gm gate valve

f) 2” dia GI union

g) 2” dia GI Tee

h) 2” dia GI elbow

i) 2” dia GI coupling

j) ¾ “ CI tap

k) ¾ “ dia GI Coupling

l) Solvent Cement

m) Chellock

34. Supplying and fixing of ISI quality PVC tank for 1000 liters capacity including cover as per the direction of departmental officers.

35. Conveying the excavated earth and debries from the site to Out side of the city limit

U PRIYA