Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹45.0 LAdmitted-Finance | +0.00% | ₹45.0 L | L1 | Admitted-Finance |
| 2 | Rejected-Technical | - | - | - | Rejected-Technical DOC NOT OK |
| 3 | Rejected-Technical SRIKOLI TULASIPUR TENTULIGAON NIMAPARA | - | - | - | Rejected-Technical DOC NOT OK |
Tender Value
₹45.0 L
EMD Value
₹44,998
Closing Date
4 Dec 2025, 5:00 pmClosed
Superintending Engineer, Agril.,Central Zone,BBSR
Superintending Engineer, Agril.,Central Zone,BBSR
CIVIL WORKS
2025_AGRIL_122015_1
14/SE(AGRIL)/CZ/BBSR/2025-26
Open Tender
Civil Works - Others
BHUBANESWAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹6,000
Superintending Engineer, Agril.,Central Zone,BBSR
₹44,998
Yes
21 Jan 2026
26 Nov 2025
6 Dec 2025
26 Nov 2025
4 Dec 2025
26 Nov 2025
Foundation excavation in Earth work in hard soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.3m in depth and as per specification approved by the department etc. complete.etc. complete as per direction of Engg-in-Charge .
Filling foundation and plinth with sand and well watered and rammed including cost, conveyance and royalty etc complete as per direction of Engg.-in-Charge.
Cement concrete (1:3:6)with 40mm size CBHG metal including cost, conveyance and royalty etc. complete as per direction of Engg.-in-Charge.
Cement Concrete (1:2:4) with 12 mm size broken hard granite chips for R.C.C. works including hoisting and laying etc. complete as per direction of Engg-in-Charge .
Fly Ash Brick masonry in c.m. 1:6 in F & P including cost,conveyance and royalty of materials curing etc. complete. as per the direction of the Engineer-in-charge.
Ist class Fly Ash brick masonry work in superstructure thoroughly soaked in water, with cement mortar (1:6) including scaffoldings ,racking out joints, curing etc complete as per specification/drawing and as per the direction of the Engineer-in-charge.
Ground Floor
First Floor
Providing and Laying reinforcement Cement concrete (M-20) with 20 mm and down graded chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement & Centering, shuttering) as per direction of Engineer-in-charge.
Column Base-GF
Plinth Beam-GF
Beam & Column-GF
Beam & Column-FF
65mm avg. Chajja-GF
65mm avg. Chajja-FF
Roof Slab-GF
Roof Slab-Ffloor
Lintel-GF
Staircase-GF
Supplying, fitting and placing uncoated HYSD bar reinforcement complete in proper position including cost of binding wire 18 to 20 gauge as per direction of Engg.-in-Charge.
Ground Floor
First Floor
12mm cement plaster in cement mortar (1:6)including necessary scaffolding curing etc. as per direction of Engg.-in-Charge.
Ground Floor
First Floor
16mm thick cement plaster in cement mortar (1:6) including necessary scaffolding curing etc. as per direction of Engg.-in-Charge.
Ground Floor
First Floor
6mm.thick cement plaster with C.M(1:4) to RCC surface including closed deep chipping and slury treatment etc. complete as per direction of Engg.-in-Charge.
Ground Floor
First Floor
Fixing colour Vitrified tiles in floors (Printed Series) of size 600mm x600 mm of approved make conforming IS:13755 laid on 20 mm thick cement mortar (1:4)and filling joints with white cement of approved quality including cost of all materials, labour T&P etc rrequired for the work all completeas per direction of Engineer-in-charge.
Ground Floor
First Floor
Fixing Vitrified tiles in dados (Printed Series) skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge.
Ground Floor
First Floor
Supply ,Fixing Vitrified industrial Tile of premium grade having thickness 8mm to 10mm conforming to IS 4457 of size 300mmx300mm in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge .
Ground Floor
Fixing Floor tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge .
Ground Floor
Fixing Ceramic Glazed wall tiles in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge.
Ground Floor
Supply and fixing of MCM Modified Clay Material - MCM A Series Brick - 240 x 60 mm of PHOMI make, as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation - Class A— ASTM E84- 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge.
All Floors
Supply and fixing of MCM Modified Clay Material - MCM R Series Brick (087089) - 222 x 63 mm of PHOMI make, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation - Class A— ASTM E84- 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge.
Wall Priming one coats on new work with wall water bound primer of approved shade as per direction of Engg-in-Charge .
Ground Floor
First Floor
Wall painting two coats with Plastic emulsion paint of approved shade as per direction of Engg-in-Charge .
Ground Floor
First Floor
Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete as per direction of Engg-in-Charge .
Ground Floor
First Floor
Wall painting two coats on new work with Weather coat paint of approved shade as per direction of Engg.-in-Charge.
Ground Floor
First Floor
Supplying and fixing of steel M.S. grill with all fitting and fixtures including cost of cutting holes in the brick masonry and R.C.C. columns and making good to damage etc, as per direction of Engineer -in -charge.
Ground Floor
First Floor
Eamel Painting two coats with enamel paint over one coat of primer of approved quality etc. complete as per direction of Engg-in-Charge .
Ground Floor
First Floor
25mm. thick grading concrete(1:2:2) using 6mm and downgrade chis over roof slab and chujja including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .
Ground Floor
First Floor
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete including Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement , including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge.
All Floors
Suppy fitting and fixing of FRP door chaukatha of size 0'-5''x0'-2.5'' frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement , including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge.
Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with l nm1 thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per direction of Engg-in-Charge .
Supplying,fitting & fixing of stainless steel of 304 grade in Hand Railing using 50mm. Dia of 2mm. thick circular pipe with Balustrade of size 32mm.x32mm.x2mm. @ 0.90m. C/C and stainless square pipe bracing of size 32mm.x32mm.x2mm. In 3 rows in stair case as per approved design and specification,buffing,polishing etc. with cost, conveyance, taxes of all materials labour T & P etc. required for the completion in all respect etc. complete as per direction of Engg-in-Charge .
Ground Floor
Supplying , fitting and fixing of two Track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame. shutters and all fitting and fixtures etc. complete as per direction of Engg-in-Charge .
All Floors
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )
Group-A
Group-B
Group-C
Supplying and fixing of following MODULAR type Bell push on the existing switch box / cover including connections etc as required. as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )
all floor
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor o f ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)
all floor
Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/
all floor
1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)
all floor
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)
all floor
Supply and fixing of 3 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch on Modular G.I. Box with Modular Base and cover (Make of wire Finolex/L&T/Anchor/Havels/V Guard)
all floor
Supply and fixing of 3 pin 6Amp plug with 6Amp switch on existing board (Modular type ).(Make of wire Finolex/L&T/Anchor/Havels/V Guard)
all floor
Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator) - 12 Way
all floor
Supply and fixing of 5Amp to 32A rating 240V "B/C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S)
all floor
Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required.(make-HPL/ Havells/ Legrand /L&T/C&S)
all floor
S/F of 1200mm High Speed Ceiling fan Alluminium Body, Copper winding, High speed ceiling fan (Make-Crompton Model-Riviera High Speed, Polycab Model-Vital, Polar Model-Winpro) etc.
all floor
Supplying and fixing of Stepped type modular fan regulator on existing switch box / cover including connections etc as required.(make-Anchor/cona/Havels/Polycab etc.)
all floor
S/F of 8" PLASTIC VENTILLATING FAN exhaust fan (Make-Crompton Model-Jura, Polycab Model-Vital, Polar Model-Winpro) etc.
all floor
S/F of 1x18 Watt LED T-5 fitting(Make-Crompton/Philips/Havells/Bajaj)
all floor
MV cable laying up to 10 sq.mm 2core on surface Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 20 sq.mm on surface as required.
S/F of 18 Watt LED Square surface mount fitting (Make-Havells/Philips/C&S/Crompton) as requred.
Supplying and fixing of 1.5T 3 star Fixed Split type AC machine ( Make-Volatas, Crrier/ Havels/ Loyd/ Hitachi/ L.G/ Blue Star etc. as required as per direction of Engineer in Charge.
Supplying and fixing of 5KVA Stabilizer (Make-V Guard, Aututech,/Microtech) etc. as required as per direction of Engineer in Charge.
Supplying and fixing of extra copper pipe with Nylon insulation etc. as required as per direction of Engineer in Charge.
Supplying and fixing of angle frame etc. as required as per direction of Engineer in Charge.
Supply fitting and fixing of 100KVA cubical pannel board with necessary ISI marked 3 Phase electrical fittings as require ( 100KVA Kit Kat, 200A Change over, 25/5 cupper busbar, Volt meter, Ampear meter, 3 phase indicator, 100A 4 pole MCCB, 10KA 63A DP MCB) with 10.00 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
All Floor
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
Cutting holes in R.C.C floors and roos upto 19cm thick for passing G.I/P.V.C pipes and fitting etc. and prepairing the holes after insertion of pipe etc. with cement concrete 1:2:4 including finishing complete so as to make it leak proof as per Engg.-in- charge.
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification etc complete as per Engg.-in- charge.
Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes complete as per direction of Engineer-in-Charge
75mm OD P.V.C. SWR S/S Pipe (ISI type-A)-All Floor
90mm OD P.V.C. SWR S/S Pipe (ISI type-A)(for rain water)-All Floor
110mm OD P.V.C. SWR S/S Pipe (ISI type-A)-All Floor
Laying in trenches unplasticised PVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by heat application method including testing as per specification complete. (Earth work in trenches to be measured and paid for separately)
125mm dia rigid UPVC pipe Class -3 (0.60Mpa)-All Floor
160mm dia rigid UPVC pipe Class -3 (0.60Mpa)-All Floor
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
20mm dia pipe-All Floor
25mm dia pipe-All Floor
Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansios etc complete as per direction of Engineer-in-Charge
A-PVC SWR coupler
75 mm dia PVC SWR coupler-All Floor
90 mm dia PVC SWR coupler-All Floor
110 mm dia PVC SWR coupler-All Floor
B-Single tee with door
75 x 75 x 75mm dia PVC SWR Tee-All Floor
90 x 90 x 90mm dia PVC SWR Tee-All Floor
110 x 110 x 110mm dia PVC SWR Tee-All Floor
C-SWR Plain Bend 87.5°
75mm diaP.V.C. SWR plain bend 87.5-All Floor
90mm diaP.V.C. SWR plain bend 87.5-All Floor
110mm diaP.V.C. SWR plain bend 87.5-All Floor
C-SWR Plain Bend 87.5°
75mm diaP.V.C. SWR plain bend 87.5-All Floor
90mm diaP.V.C. SWR plain bend 87.5-All Floor
D-SWR Plain Door Bend 87.5°
Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification. etc complete as per direction of Engineer-in-Charge
‘P’ trap (with horn or without horn) -All Floor
‘S’ trap (with horn or without horn)-All Floor
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification all etc. complete as per direction of Engg. in charge.
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
Fixing wash down water closet (Europian type WC ) with integral 'S' and 'P' trap to the floor with wooden plug and chromum plated screw including jointing the trap including eat cover all etc. complete as per direction of Engg. in charge.
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification etc. complete as per direction of Engg. in charge.
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixers etc. complete as per direction of Engg. in charge.
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
Fixing Wash Basin
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
with hole for pillar type with cast iron or M S bracket painted white including cutting holes in the walls and making good the damages etc. complete as per direction of Engg. in charge. For Wash Room:Porcelain Counter Top Basin Oval Shape (550x430)
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
Fixing Wash Basin with hole for pillar type with cast iron or M S bracket painted white including cutting holes in the walls and making good the damages etc. complete as per direction of Engg. in charge. Porcelain 22"x 16"(550x400) W.H.B
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.etc. complete as per direction of Engg. in charge:Porcelain Flat back stall type magnum Urinal
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
Fixing glazed earthenware squatting plate of size 600mm x 350mm conforming to IS:2556- Part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal all complete as per specification etc. complete as per direction of Engg. in charge. One-seated Urinal 1m x 0.50m x 0.15m size
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge. 250mm wall
Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specificationetc. complete as per direction of Engg. in charge.
Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specificationetc. complete as per direction of Engg. in charge.
Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge.
15mm Short Body Bib Cock-All Floor
15mm Long Body Bib Cock-All Floor
Fixing of Brass Screw-down Angle/Counseales stop cock Cocks polished bright conforming to IS:781-1995 of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge.
15mm dia CP Brass Angle Stop Cock-All Floor
20mm dia CP Brass Concealed Stop Cock-All Floor
Fixing of Brass 15mm dia CP flange of the following nominal sizes as per specification etc. complete as per direction of Engg. in charge.
15mm dia CP flange-All Floor
Fixing Bib Cock capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification etc. complete as per direction of Engg. in charge.
15mm dia C.P. Pillar cock with swinging spout -All Floor
C.P.revolving shower (bend type)-All Floor
CP Health Foucet with 1.0 mtr PVC Tube-All Floor
Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specificationetc. complete as per direction of Engg. in charge.
600mm x 450mm bevelled edge mirror-All Floor
Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification complete as per direction of Engg. in charge.
C.P. glass self with glass-All Floor
Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. complete as per direction of Engg. in charge.
C.P. towel rail.(600x20)mm-All Floor
Fixing (a) Liquid Soap Container – Glass container or Plastic container with Chromium Plated brass lid and brackets fixed to wooden plugs with Chromium Plated brass screws or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws or (c) white glazed tooth brush holder fixed to wooden plugs with Chromium Plated brass screws as per specification complete as per direction of Engg. in charge.
C.P Soap holder/disc.All Floor
Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification complete as per direction of Engg. in charge.
1000 litre capacity Double Layer Cylinderical Vertical water storage tanks
Supply , fitting and fixing of following fixers including all materials and labours etc all complete as per specification complete as per direction of Engg. in charge.
450x450mm Square Man Hole Cover -16.0 kg
90mm dia P.V.C. Nahani Trap
110mm dia PVC SWR Single Y with door
PVC SWR Jalli 110mm dia
110 mm dia P.V.C. SWR Vent Cowl
UPVC BALL VALVE Sch-80 (Solvent Welded with Metal Ball)-25mm dia
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm ..,12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)(No deduction have to made for light opening.)etc. complete as per direction of Engg-in-Charge .
Providing fitting and fixing of Decorative Gypsum Curnice etc complete in all respect as per direction in charge.
Providing fitting and fixing of Decorative Gypsum Flower etc complete in all respect as per direction in charge.
Providing ,fitting & fixing of Officers Table made up with 19 mm thick phenol bounded.BWR grade block board and subsequently finished with 1mm thick BWR grade decorative laminates of approved shade on required side by synthetic adhesive and headless pins with all assosarry etc. complete as per direction of Engineer in charge.
Providing ,fitting & fixing of Credenza made up with 19 mm thick phenol bounded BWR grade block board and subsequently finished with 1mm thick BWR grade decorative laminates of approved shade on required side by synthetic adhesive and headless pins with all assosarry etc. complete as per direction of Engineer in charge.
Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete. SR-2022, page No.-234, sl no,-5
Filling foundation and plinth with sand and well watered and rammed including cost, conveyance and royalty etc complete as per direction of Engg.-in-Charge.
Cement concrete (1:3:6)with 40mm size CBHG metal including cost, conveyance and royalty etc. complete as per direction of Engg.-in-Charge.
Cement Concrete (1:2:4) with 12 mm size broken hard granite chips for R.C.C. works including hoisting and laying etc. complete as per direction of Engg-in-Charge .
Providing ,fitting & fixing of File Cabinet made up with 19 mm thick phenol bounded.BWR grade block board and subsequently finished with 1mm thick BWR grade decorative laminates of approved shade on required side over wooden frame fixed with raw plug including drilling of necessary holes fixed by synthetic adhesive and headless pins with all assosarry etc.
complete as per direction of Engineer in charge.
Earth work by mechanical means borrowed from out side within 5km initial lead and 1.5m initial lift including levelling and dressing the bed and sides depositing muck within initial lead and lift etc. complete as per direction of Engg-in-Charge .
Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantaling then after casting including cost of materials etc. complete as per direction of Engg-in-Charge .
Providing and laying 80mm thick factory made cement concrete inter locking paver block of M-40 grade conforming to IRC SP-63:-2018 made by block machine of approved size , design & shape and in required pattern on road surface including filling the interstices with sand etc.complete including all cost etc. complete as per direction of Engg-in-Charge .
Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm ofM-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect confonning to IS 5758: 1984.etc.complete including all cost etc. complete as per direction of Engg-in-Charge .
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination drilling rigs ( 1200 cfm/300psi) as required to suit to the site condition as per direction of Engineer-in-charge including use of own rig with its accessories, tools and plant, and consumables etc., for lowering of 200mm dia PVC/ GI Pipes for housing , fitted with socket and with or without well screen as per the necessity for soft, medium hard and boulder formation (GI/ PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well ). etc.complete as per direction of Engg. in charge.
Labour for drilling to accommodate 200 mm x 150 mm size vertical bore hole (0.00 to 100.00 mtr ).:
Lowering the following size GI/ PVC pipes with or without slotted pipes as per the necessity from ground level fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc., complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. etc.complete as per direction of Engg. in charge.
0 to 30 mtrs or more
Cleaning and developing the tube wells using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of Engineer-in-charge.
Supplying all materials, labour, tools and plant and withdrawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition etc complete as per direction of Engineer-in-charge.
With drawing of 150 mm dia PVC/GI casing pipe.(If Bore well Faliure) 0 to 30 mtrs or more.
Suly of Filter Media (Gravel) with size varying from 40 to 60 mm at bottom to 2 to 5 mm
Suply of 150 mm dia Sch 80 PVC casing pipe
Supply of 150mm dia PVC (C.S) END CAP
Cost of 1 no. 1.5 H.P Submersible Pump set having discharge 300 LPM with operating head of 40 mtr (12 Stage) 1Stage Head ,=,4 mt. (Kirloskar / Lubi) with Control Pannel
Supply of Electrical Flat CableCable (Electrical 4 mm Squre mm thickness)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.76 MB
BOQ_567117.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid