Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹10.8 L+₹76,372 (7.60%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹12.5 L+₹2.4 L (24.0%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹13.5 L+₹3.4 L (34.0%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹15.0 L+₹4.9 L (49.2%)Rejected-Finance 306 SHIV BARI MARG PANCHVATI NAGAR BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹20.4 L
EMD Value
₹40,900
Closing Date
15 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bhisiana
GE (AF) Bhisiana PIN-151201
As per BOQ/ Price schedule
2023_MES_609283_1
GE/BHI/T-09/2023-24
Open Tender
Civil Works
Item Rate
273 days
GE (AF) Bhisiana
AS per NIT/tender documents
6 documents required · 6 mandatory
₹500
GE (AF) Bhisiana
₹40,900
12 Oct 2023
15 Jul 2023
17 Aug 2023
15 Jul 2023
15 Aug 2023
1 Aug 2023
15 Jul 2023 - 21 Jul 2023
Amount
Taking down cement plaster on brick or stone masonry Including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed by Engineer in Charge.
M&L for 15 mm thick plaster in 1:4 cement mortar and finishing the surface even and fair without using extra cement including applying two coat of cement base paint over a coat of primer after preparation of new plastered surfaces complete all as specified and directed by Engineer in Charge.
Material and labour for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc including applying two coats oil bound distemper (OBD) over a coat of primer and after preparation of plastered surfaces complete all as specified and directed by Engineer in Charge.
Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc and Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm ver and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer in Charge.
M&L for 5 mm thick cement plaster in CM (1:3) on fair faces of concrete surfaces as in ceiling and finishing the surface even and fair (without using extra cement ) etc,and applying two coats of white wash on Ceiling, complete all as specified and as directed by Engr-in-charge
M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and directed by Engineer in Charge.
Demolition of brick or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facing, dressed stonework and percast concrete articles, complete all as specified and directed by Engineer in Charge.
M&L for Brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean redius, biult in 1:6 cement mortar complete all as specified and directed by Engineer in Charge.
Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc. complete all as specified and directed by Engineer in Charge.
Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint on walls, pillars cornices over a coat of alkali resistant primer of same make complete all as specified and directed by Engineer in Charge.
M&L Preparing the plastered / unplastered old decorated surfaces of walls and applying one coat of white wash on wall surface complete all as specified and directed by Engineer in Charge.
Ditto as per item No. 11 above but on ceiling complete all as specified and directed by Engineer in Charge.
M&L peparation of old surfaces and applying one coats of plastic emulsion paint, interior grade of approved shade complete all as specified and directed by Engineer in Charge.
M&L for providing 3 mm thick wall care putty (JK/ Birla wall care) on wall surfaces finishing the surface even and smooth complete all as specified and directed by Engineer in Charge.
M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed by Engineer in Charge.
Material and labour for preparation of previously treated / untreated surfaces of chequered or interlocking tiles and applying two coats of indigo washable paint over and after applying a self priming coat of Indigo floor coat emulsion diluting the emulsion with 30-40% water complete all as specified and directed by Engineer-in-charge.
M&L for preparation of old painted surfaces of eaves gutter and CI pipes any description, n. exc 30 CM girth including holderbats, distance pieces, etc.and applying a coat of japan black paint complete all as specified (length measured over bends, branches etc.) directed by Engineer-in-charge
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed by Engineer in Charge.
Material and labour Coloured Non Skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding in 1:6 CM complete all as specified and directed by Engineer in Charge.
Material and labour for glazed ceramic coloured tiles of size 450x350x7mm thick thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including 10mm thick cement plaster 1:4 CM to receive vertical tiles complete all as specified and directed by Engineer in Charge.
Material and labour Coloured Non Skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding in 1:6 CM complete all as specified and directed by Engineer in Charge.
Material and labour for coloured joint free vetrified tiles(double charge) 9 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified and directed by Engineer in Charge.
Material and labour for coloured joint free vetrified Tiles 9 to 10mm thick (square/rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles complete all as specified and directed by Engineer in Charge.
Demolition of Stone slabs laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed by Engineer in Charge.
M&L for 18-20 mm th granite of any type work ( table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) including pointing in white cement 1:2, using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing laid on 15 mm thick screed bed in CM 1:4 set and jointed. including dismantling/demolition of existing floor/slab finishes complete all as specified and directed by Engineer in Charge.
M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including dismantling/demolition of existing floor/slab finishes complete all as specified and directed by Engineer in Charge.
M&L for rounding to edges of stone slabs one edge, such as in steps , cooking platform and other similar situations complete all as specified and directed by Engineer in Charge.
Demolition of cement concrete in any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer in Charge.
M&L for Cement concrete 75 mm thick type D-2, 1:4:8 (40mm graded aggregate),finishing cement concrete complete all as specified and directed by Engineer in Charge.
M&L for Machine pressed precast concrete interlocking glossy paver block any shape and size confirming to IS 15658-2006 of 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed by Engineer in Charge.
M&L for laying spreading/ levelling sand cushioning under interlocking tiles thickness n. exc 50mm including watering and consolidation complete all as specified and directed by Engineer in Charge.
M&L for Cement concrete 100 mm thick type D-2, 1:4:8 (40mm graded aggregate),finishing cement concrete complete all as specified and directed by Engineer in Charge.
Material and labour for 50mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer in Charge.
M&L for cement concrete endura glossy chequered tiles 300 x 300 x 25 mm thick machine pressed set jointed and pointed with grey cement & pigment in neat cement slurry over cement screed bed of mortar 15mm th in CM 1:6 complete all as specified and directed by Engineer in Charge.
S&F in repairs110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including MS/PVC clamps @ 2.0 mtr spacing with nut bolts/ nails including dismantling of old AC rain water/sewage stacks pipe etc. complete all as specified and directed by Engineer in Charge.
Material and labour 15 mm dia tubes medium grade galvanised with all fitting and fixed to walls and ceilings or laid in floors including taking down and cleaning for removal from site etc complete all as specified and directed by Engineer in Charge.
M&L for 20 mm dia tubes, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down and removal from site complete all as specified and as directed by Engineer-in-charge.
M&L for Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) with 20mm tank nipple hoisted and fixed in position all as specified and directed incl Dismantling water tanks exc 250 ltr and nexc 500 ltr and removing from site complete all as specified and directed by Engineer in Charge.
-Ditto- All as per item above but 1000 ltr capacity.In cluding dismantling of old tanks all as specified and directed by Engr in Charge.
S&F in repairs Ball valves 20mm high pressure of PTMT (Min weight 210 gms) with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
S&F in 20 mm ( Min weight 45 gms) GI Tank Nipple suitable for HDPE water tank
S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and andle including including mounting brackets (Note: The cistern suitable for above item)
S&F in repair china wash down water closet padestal pattern white excluding flush and fix to position, including connection to drain etc all as specified as directed.
S&F in repair plastic water closet seat white close pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified as direected.
S&F in repairs vitreous china WHB white flat back size 550 x 400 mm including brackets, 32 mm dia waste fittings brass CP for WHB with long shank screwed and fly nuts , flags and bedded in red lead cement and outer end fixed complete all as specified and as directed by Engineer-in-charge.
S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed by Engineer-in-charge.
S&Fin repairs 15mm dia Pillar taps fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe .
S&F in repairs 15 mm bore Stop Valve fancy type chromium plated with long shank and cup (concealed type) ,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed in repairs
S&F in repairs 15 mm bore Stop/angle Valve fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed in repairs
S & F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm
S&F in repairs 75mm dia PVC (SWR)b floor trap, with grating including jointing with solvent cement in repairs
S&F in repairs Brass Chromium plated shower rose 125 mm size with or without swivel joints,including fixing to steel pipe or union as in repairs
S&F in repairs MS powder coated curtain rods of 20mm bore, including 02 Nos MS/PVC powder coated brackets in each curtain rod and 02 Nos PVC feneals (golden colour as per sample) with necessary screws and rowl plugs complete allas specified and as directed.
S&F in repairsHand shower (Health faucet) with8mm dia, 1.20mtr long flexible tube & wall hook fixed and installed complete all as specified and as directed by Engineer-in-charge.
Taking down Chowkhats or frames not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer in Charge.
Taking down shuttter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in same opening as per specification and drawing .
S&F Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and directed by Engineer in Charge.
S & F 100 mm Butt hinges medium weight cold rolled mild steel complete all as specified and directed by Engineer in Charge.
S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer in Charge.
S&F 150mm aluminium handle cast type anodised complete all as specified and directed by Engineer in Charge.
S&F of Anodised alluminium frame for doors, windows, ventilatrs with one or more rebates includingAluminium beading, rubber bead, Tension rods joining cleat for fixing etc, complete all as specified and directed by Engineer in Charge.
S&F of anodised aluminium door shutters, alluminium sections weighing 0.55 kg/M including necessary joining cleats , glazing clips, rubber neoprene packing, handles 2 Nos in each door , hinges anodised aluminium snap beading screws etc, with powder coating of any colour (thickness of powder coating not less than 50 micron) complete includng taking down complete all as specified and directed by Engineer in Charge.
S&F in repairs aluminium powder coated window/door grills , mesh size 50mm x50mm thickness 3.8mm complete all as specified and directed by Engineer in Charge.
SF Powder coating (Powder coating not less than 50 micron)Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, nodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer in Charge.
S&F 5.5 mm thick tinted glass ordinary quality and glazing with oil putty or with wooden/ alluminium shutter (supplied alongwith shutter) exc 0.50 sqm each complete all as specified and directed by Engineer in Charge.
M&L 12 mm thick both sides prelaminated Particle board, exterior grade, fixed with screws to frame work in cup board shutters, partitions, shelves etc. complete all as specified and directed by Engineer in Charge.
S&F in repairs for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engineer in Charge.
S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium (extruded section body) and fixed complete all as specified and directed by Engineer in Charge.
STELLAR PROJECTS
Rasvinderpalandco
RAKESH KUMAR GARG & CO.
M/s Luxmi Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .