Remaining Work of RJ-11-03/SDRF/RTGH/ 2025-26 Sub Dn II Ratangarh Section I (Pkg No 3/2)

Restoration work at Rajaldesar (NH-11) Loonasar - Parihara - Rukhasar - Menasar (SH07) Road

Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and MoRTH specification Clause 1900 and 2800

Printing letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade

Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.Direction & Place Identification sign boards including painting of posts.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Supplying filling and stiching of empty cement bags either of plastic or jute with earth available at site of weight not less than 40 kg including ecavation etc. complete

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Repair of Surface defects in existing cement concrete pavement surface by providing and laying treatment of wear & tear concrete surface with pre-mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600 upto 10 mm thickness with following property– Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting, bond strength of 4 MPa within 24 hours and repaired surface should be ready to use within 3 hours. Note : (This item is to be used in only emergency situation after decided by Engineer in charge )

Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B as per MoRTH specification Clause 3004.2

Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRTH specification Clause 404

Left out Portion of SH - 07 Mainasar

Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and MoRTH specification Clause 1900 and 2800

Printing letters and figures of any shade with synthtic enamel paint of any approved colour to give an even shade

Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. For Grading III Material

Supplying filling and stiching of empty cement bags either of plastic or jute with earth available at site of weight not less than 40 kg including ecavation etc. complete

Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as per IRC : 99-1988

Please Enable Macros to View BoQ information