Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹27.2 L+₹2.5 L (10.0%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹29.3 L+₹4.6 L (18.5%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | L3 | Rejected-Finance L3 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
26 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
CERTAIN REPAIR TO OTM ACCN ALONG DEEPNAGAR ROAD INCL A MESS, B MESS, 127 THE MALL CERTAIN MESSES UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT
2023_MES_606205_1
GE/JULL/ET-30/2023-24
Open Tender
Civil Works
Item Rate
273 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹50,000
Yes
11 Sept 2023
28 Jun 2023
3 Aug 2023
28 Jun 2023
26 Jul 2023
14 Jul 2023
Amount
Demolition of cement concrete in ground floor and paving n. exc. 15cm thick (below or above ground level) and removing surplus spoil out of defence land where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
Material and labour 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified & directed.
Material and labour for 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in floor toppings concrete surface finished even and smooth without using extra cement complete all as specified and directed
Supply and fixing glass dividing strips 3mm thick and 38mm wide inserted in position conforming to design complete all as specified and directed.
Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.
Material and labour 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished even & fair to receive topping floor finish/layer all as specified & directed.
Material and labour non skid ceramic coloured tiles 6 to 7mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
All as per item No 7.00 but in skirting/ dado laid over and including 15mm thick rendering in cement mortar (1:4) as backing coat.
Material and labour non skid ceramic coloured tiles of size 300 x 300 x 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
Material and labour glazed ceramic coloured tiles of size 450 x 300 x 6 to 7mm thick as on vertical surfaces i.e. in skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 15mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed.
Material and labour vitrified ceramic tiles 10mm thick, any shade as approved, area of each tile n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including rendering 15mm thick in cement mortar (1:6) finished rough to fix tiles complete all as specified and directed.
Material and labour vitrified ceramic tiles 10mm thick, any shade as approved, area of each tile n. exc. 0.36 Sqm (square/ rectangular) in vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.
Material and labour 18-20mm thick machine cut Kota stone slabs 550mm x 550mm as in flooring, jointed with grey cement mixed with pigment to match the shade of the slab including grinding, rubbing and polishing to mirror finish with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes including neat cement slurry with 3 Kg/Sqm complete all as specified and directed
All as per item No 13.00 but as in skirting laid over and including 15mm thick rendering in cement mortar (1:4) as backing coat.
Material and labour Dholpur stone as in wall cladding with machine cut stone as in face work, pillar, arches, hexagonal roof pillar and all facing etc of 15 to 18mm thick one side single length laid and jointed in cement and sand mortar (1:2) including ardelite chemical and recess pointing pointed with an admixture of white cement and stone dust (1:1) and making edges, work in small patches, stone shall be of uniform colour of each stone and size not exceeding 0.20 Sqm each fixed, over & including 10mm thick cement plaster in cement mortar (1:4) on brick wall or concrete surface finished fair & even to receive tiles complete all as specified and directed.
Material and labour granite (of any type) work 16 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, hand wash places and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:6) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.
Material and labour chequered cement concrete tiles 25cm x 25cm x 20 to 22mm thick with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
Material and labour 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-30 grade, with grey cement and pigment, laid in floor/ path/ hard standing in any pattern as approved, laid over and including 40mm thick sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Material and labour reinforced cement concrete (1:2:4) type B-0 using 12.5mm crushed stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified and directed.
Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick (Horizontal or sloping) for flat & rough finished surfaces of concrete complete all as specified and directed.
Material and labour 15/16mm thick machine cut Udaipur green polished stone slab, set and jointed with neat cement slurry mixed with pigment to match the colour of stone, laid over and including minimum 15mm thick screed bed in cement mortar (1:6) including cutting and polishing and making holes in stone and RCC shelves suitable for passing gas pipe with round edges as required complete all as specified and directed.
Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing pipe complete including breaking up existing damaged WC seat and make good to floor complete all as specified and directed.
Supply and fixing vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminium hinging device including mild steel chromium plated jet fixed to water closet with 415mm to 445mm long flexible pipe complete all as specified and directed.
Supply and fixing coloured vitreous china wash down water closet pan (pedestal pattern) with syphonic action type flushing cistern in single piece pattern with inlet ball valve float and handle, including fixing bolt, plastic water closet seat cover closed pattern with bottom and cover and mild steel chromium plated hinging device with CP jet spray with 1m flexible tube connected with and including CP stop cock, fixed in repairs complete all as specified and directed.
Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on brick wall 110mm dia including demolition and braking up existing pipe in event n. exc. 150mm dia including fittings complete all as specified.
Supply and fixing PVC (SWR) junction single (Single T) 110mm bore complete all as specified
Supply and fixing PVC (SWR) vent cowl 110mm bore all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.
Material and labour galvanised steel tubes 15mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. including taking up/ down existing tubing complete all as specified and directed.
Material and labour galvanised steel tubes 20mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. including taking up/ down existing tubing complete all as specified and directed.
Supply and fixing PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.
Supply and fixing in repair vitreous china wash hand basin, white, flat back 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including 02 Nos bracket and cutting for and pinning in ends of brackets complete all as specified and directed.
Supply and fixing vitreous china bowl urinal, full stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including and fixing of flush pipe, grating with waste coupling and union for discharge pipe, waste pipe, spreader etc, size of urinal 9cm x 39cm x 37.5cm complete all as specified and directed.
Supply only pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
Supply and fixing in repairs pillar taps fancy type, controlled by sensor high quality cast copper, chromium plated screwed one end with long screwed shank screwed for 15mm bore complete all as specified and directed.
S&F in repairs sensor controlled spreader, brass, chromium plated, for urinal not fixed as per manufacturer’s instructions complete all as specified and directed.
Supply and fixing hand shower (health faucet) with 8 mm dia 1 mtr long flexible tube and wall hook with NRV (back flow preventer) fixed in repair complete all as specified. Make: Jaquar Cat No. ALD 577 or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications
Supply and fixing toilet paper holder of chromium plated with flap fixed to walls and including chromium plated brass screws and wooden/ plastic cleats, approved quality complete all as specified. Make: Jaquar (Continental Accessories) Cat No. 1153N or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.
Supply and fixing Acrylic corner shelf (with chromium plated bracket) 3 in set of shelf 8mm thick with and including chromium plated brass screws and wooden/ plastic cleats, approved quality complete all as specified and directed. Make: Jaquar Cat No. CAN 1173 or equivalent from Group 1 as specified in Appendix ‘B’ to Particular Specifications.
Supply and fixing hot and cold mixer fancy type single or double legged chromium plated brass screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed in repairs to wash hand basin complete all as specified and directed.
Supply and fixing PVC connection fiber, reinforced 45 cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed.
Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed.
Supply and fixing in repair bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed.
Supply and fixing in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight- 90 gms) complete all as specified.
Supply and fixing in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to GI pipe complete all as specified
Supply and fixing brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed complete all as specified and directed.
Material and labour PVC bathroom cabinet of size 535mm x 483mm x 110mm with mirror fixed in repairs complete all as specified and directed.
Supply and fixing soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and directed.
Supply and fixing Acrylic corner set of 3 pieces as per sample approved by Engineer-in-Charge all as specified and directed.
Supply and fixing Chromium plated Jet for EWC with 1 m long CP tube with CP wall hook superior quality complete all as specified.
Supply and fixing toilet paper holder of chromium plated fixed to walls chromium plated brass screws complete all as specified.
Supply and fixing in repair sink with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.
Supply and fixing rotational moulded polyethylene water storage tanks, 500 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position as in repairs all as specified in SSR Part I, complete all as specified & directed.
Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position as in repairs all as specified in SSR Part I, complete all as specified & directed.
Material and labour ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore dia of iron pipe or brass ferrule and fixed complete all as specified
Supply and fixing stop valves 20mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.
Supply and fixing structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering. Doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified, steel conforming to Fe-410 Gde-E-250 .
Material and labour 35mm thick 2nd class hard wood factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Material and labour 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.
Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.
Supply and fixing 100mm size stainless steel butt hinges for fixing to PVC doors complete all as specified and directed.
Material and labour Mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Supply and fixing MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed.
Supply and fixing MS 150mm size PTMT bow handle fixed with machine screws complete all as specified and directed.
Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed in repair complete all as specified and directed.
Supply and fixing 200mm size PTMT tower bolt fixed with machine screws complete all as specified and directed.
Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two No sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four No for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 No per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 No per leaf (c) MS tower bolt 150mm long- 2 No per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (e) MS pintal hinges of size 75mmx12mm- 2 No per leaf (f) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Grills/ guard bars, glass, wire mesh and painted shall be measured and paid separately under respective item of this BOQ.
All as per ser item No. 75.00 but gauged shutters without sash bars.
All as per ser item No. 75.00 but as in ventilators
Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified & directed.
Material and labour galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
All as per item No 79.00 but in repairs
Material and labour hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frames glazed with putty or fixed with beads complete all as specified and directed.
Material and labour 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.
Material and labour 4mm thick frosted sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
Material and labour aluminium anodised door shutter having 150mm x 44mm x 2.85mm thick bottom rail, 150mm x 44mm x 3mm thick middle rail 100mm x 44mm x 2.85mm thick stile and top rail including necessary fittings joinery cleat, glazing packing snap beading 10mm x 10mm, anodised aluminium handle 200mm long (02 No), 3 No 100mm size chromium plated butt hinges, 2 No 200mm size aluminium tower bolt and aluminium body hydraulically door closer, designation No-3, universal type, weight between 61 to 80 kg etc including frame of section 100mm x 44mm x 3mm and door shutter, bottom portion covered with 9 mm thick pre-laminated particle board, interior grade, pre-laminated on both sided with decorative choice lamination (colour/design approved by Engineer-in-charge) fixed to aluminium frame work and top portion covered with 5.00mm thick float glass and pattern. One mortice lock (Make: Harrison) with shutter and fixing complete all as specified and directed.
Material and labour anodised aluminium window / ventilator shutter side hung having 75mm x 44mm x 2.85mm thick stile bottom rail an top rail including necessary fitting joinery cleat glazing packing snap beading 10mm x 10mm, 2 Nos of anodised aluminium handle 150mm size, 2 No chromium plated butt hinges 75mm size and 2 No 100mm long aluminium tower bolt etc. including frame of section 100mm x 44mm x 3mm and including 5mm thick float glass and fixing complete all as specified & directed
Dismantling of brick tiles single layer as in roof covering all as specified and directed.
Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
Material and labour PCC (1:2:4) type B-0 using 12.5mm graded stone aggregates as in roof kerbs or mud stops, benching, coping etc, rounded or chamfered on edges complete all as specified and directed.
Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to made surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro-concrete/ general purpose grout as recommended proportionally as per recommendation of manufacturer. Making of goll as at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight all as specified and directed Make : Asian Paint/ STP/ Sikka
Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/ brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin : Harder) application with 100% water dilution and pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg/Sqm all as specified and directed. Note : Application should be done with Graco sprayer by a company authorised applicator. Make : Asian Paint/ STP/ Sikka
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
Material and labour 6mm thick asbestos cement fiber corrugated/ semi corrugated sheets as in roof coverings fixed with L-type or J-type hooks or cranked bolts complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness, Nainital or similar pattern roof coverings complete all as specified and directed
Supply and fixing Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed
Supply and fixing Pre-painted Galvalume aluminium Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed
Supply and fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 120 gm, complete all as specified.
Supply and fixing 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lap, fixed with bolts coach screws and washers with steel framed gate, walls etc. complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.
Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails, post etc and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250 Quality 'A', complete all as specified and directed
Dismantling of wall and ceiling boards(fibre, pulp insulation etc) of any description, incl. cover fillets etc., complete all as specified and directed
Material and labour for 4mm thick plain cement building boards frame work with screws as in ceiling complete all as specified
Supply and fixing mineral fibre acoustical suspended ceiling system with dune (Tegular) edge tiles with 24mm exposed grid. The tiles should have humidity resistance of 99%, NRC 0.5, light reflectance > 85%, thermal conductivity K=0.052-0.057 w/m K, colour white, fire performance UK class 0/ class I (BS 476 pt-6 & 7) in module size of 600x600x16mm, suitable for green building application with recycled content of 32%. The tile shall be laid on prelude 32 with 24mm wide T section flanges colour white rotary stitching on all T sections i.e. the main runner, 1200mm & 600mm cross Tees with a web height of 27mm and a load carrying of 7.1 Kgs/sqm and minimum pull strength of 100 Kgs. The T section have galvanising of 90 grams per Sqm and need to be installed with suspension system. All accessories manufactured and supplied by armstrong world industries complete all as specified and directed
Material and labour for solid PVC wall/ ceiling consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame on wall and ceiling as per specifications and drawing approved by Engineer-in-Charge.
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
Material and labour brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.
All as per Ser item No 105.00 above but except bricks
Material and labour repairing of RCC projections, chajjas, roofs, fascia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with ot without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm including necessary form work and applying two coats of cement base paint of tint matching with the existing surfaces; work in building at any height as required complete all as specified and directed.
Material and labour 25mm dia powder coated mild steel curtain rod, fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall for MS hook fixed complete all as specified and directed.
Demolition of one way trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified.
Material and labour for providing 35mm thick precast cement concrete louvres and jallies, in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregates, including all mouldings and set in cement mortar (1:4) complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed at a level n.exc 1.5 m above the starting point all as specified
Material and labour 15mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour 5mm thick rendering in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour preparation of new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer and one coat of Birla wall putty (Birla putty surfaces to be finished even & smooth) complete all as specified and directed.
Material and labour preparation of new plastered surface of walls and applying three coats of white washing complete all as specified and directed.
Material and labour preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.
Material and labour preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint complete all as specified and directed.
Material and labour preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting n. exc. 10cm girth complete all as specified
Cleaning of over head tank of any description and any capacity descaling, washing complete with soap solution and removing vegetation around the over head tank/ platform including opening and reconnecting with GI tubing as site requirement complete all as specified.
KABEER CONSTRUCTIONS
NATIONAL BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .