REPAIR/ MAINT OF SECURITY WALL, BOUNDARY WALL AT PALMA GRN UNDER AGE(I) CIF (R)

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water. complete all as specified and directed.

M & L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work finished even and fair without using extra cement complete all as specified and directed.

M & L for Rendering 5mm thick in cement mortar 1:4 on concrete surfaces finished even and fair without using extra cement. complete all as specified and directed.

M&L for preparing plastered new and undecorated surface of walls, applying chalk whiting on plastered surface preparatory to walls with two coats of cement base paint (Camoflage pattern) white or tinted complete all as specified and directed.

Applying one coats of cement base paint (Camoflage) on old surfaces wall including preparation of surface complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of zink chrome primer complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks,etc and similar work conforming to Fe 290 Gd E-165. complete all as specified and directed.

S & F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed each line wire to be measured complete all as specified and directed.

Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) as in roofs, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work not exc 15 cm thick complete all as specified and directed

M & L for providing precast cement concrete type B1, 1 : 2 : 4 (20 mm graded aggregate) as in landing, cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and directed

M & L mild steel TMT bars 6 mm to 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of brick/stone masonry built in CM. complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 but except bricks complete all as specified and directed.

M & L for walling of random rubble stone masonary uncoursed well bonded , bedded and solidely hearted built in cement mortor 1:4 etc complete all as specified and directed.

M & L for walling of random rubble stone masonary uncoursed well bonded , bedded and solidely hearted built in cement mortor 1:4 except stone etc complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses. Hammer dressing witrh maximum depression on face from straight edge held against the dressed surface not exc 20 mm in lime or sand stone complete all as specified and directed

M & L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.

25mm thick precast cement concrete Type B-0 (1:2:4) using 12.5mm graded aggregate louvres and jallies, (measured solid), in luding all mould- ings but excluding frame and Set in cement mortar (1:4) (Pre cast frame shall be measured and paid separately) complete all as specified and directed.

M&L Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0. complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 48,750.00 during AOC Note:- Tenderers shall not quote for this Schedule

Please Enable Macros to View BoQ information