ADDN/ALTN AND REPAIR IN MD ACCN BLDG NO. P-10, 12, 13, 14, 16 and 19 AT RLT VIHAR and P- 8, 9, 10, 11, 12, 16 and 17 AT FD PARK AREA UNDER GE (N) AKHNOOR

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n exc 4 sqm and removing from site, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm (below or above ground level) thickness, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided, complete all as specified and directed.

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion, complete all as specified and directed.

Demolition of stone slab and tiles laid, bedded and pointed in any mortar of any description or thickness in floors and and rubbish off the premises, complete all as specified and directed.

Dismantling structural steel work in cluding doors, gates (framed work) etc of any description, complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated) sheets including ridges as in roof covering, complete all as specified and directed.

Dismantling of wall and ceiling boards ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness,including ceiling framework, complete all as specified and directed.

Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm, complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc, complete all as specified and directed.

Pressed steel frames of size 125mm x 60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, hinges, lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate, complete all as specified and directed.

Pressed steel frames of size 105mm x 60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, hinges, lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate, complete all as specified and directed.

Solid PVC Door Frames of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

100mm long butt hinges (medium weight) colled rolled mild steel, complete all as specified and directed.

75mm long butt hinges (medium weight) colled rolled mild steel, complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed at bottom body of door overall length of cover plate 140mm, complete all as specified and directed.

Extruded aluminium alloy handles fabricated type anodised of size 150mm long 12mm dia, complete all as specified and directed.

MS 300 mm ordinary rat rails rod pattern springs including roller and roller plate, complete all as specified and directed.

Hasp and staple Alumnium anodised lncluding bolt to hinges plate 100mm size, complete all as specified and directed.

300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

Aluminium anodized 150mm long barrel tower bolt of extruded section and fixed, complete all as specified and directed.

Factory made box type steel windows with double shutters ( inside for wire mesh & outside for glass) including guard bars, hinges, steel handle, tower bolt and steel peg stay, complete with & without Glazing bars, dovetailed or welded, complete all as specified and shown on drawing No. CEUZ/TD/1517/15 sheet 1/3 to 3/3.

Factory made box type steel ventilators top hung with double shutters ( inside for wire mesh & outside for glass) including guard bars, hinges, steel handle, tower bolt and steel peg stay, complete with & without Glazing bars, dovetailed or welded, complete all as specified and shown on drawing No. CEUZ/TD/1517/15 sheet 1/3 to 3/3.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheetto be fitted in the MS frame welded/sealed to the styles and rails with suitablePVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawings, complete all as specified and directed.

Glazed and skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a),complete all as specified and directed.

35 mm thick Flush shutters, solid core with particle board exterior grade as per IS-2202 of 199 (Part-I). Flush door shutter shall be internally lipped as per clause 8.52.2 of SSR-2009 Part-I, complete all as specified and directed by Engr-in-Charge.

Pre laminated particle board, exterior grade, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screw to timber frame in repairs as cupboard shelve and shutter, 19mm thick, complete all as specified and directed.

Pre laminated particle board, exterior grade, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screw to timber frame in repairs as cupboard shelve and shutter, 12mm thick,complete all as specified and directed.

Extra over rates of block board or veneered particle board of thickness 18/19 mm for external teak wood lipping, 6mm thick fixed with nails, complete all as specified and directed.

Galvanised mild steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples, complete all as specified and directed.

Sheet glass 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.in each pane complete all as specified and directed.

Figured glass 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.in each pane, complete all as specified and directed.

Curtain rail ,20 mm dia Stainless steel ,Chromium plated fixed with C.P bracket and side flint, incl taking down of old curtain rods, complete all as specified and directed.

Brick work with sub class “B” bricks (using old size bricks) straight or curved on plan exc 6M mean radius build in cement motar 1:6 using, complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement motar 1:6 finished even and smooth without using extra cement ( internally) surface other than fair faces, complete all as specified and directed.

Rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement .complete all as specified and directed.

Rendering 15mm thick on surface other than fair faces of brick work or concrete surfaces in cement motar 1:4 finished using water proofing compound as per manufacture's instruction, ( WPC to be paid measured and seperately as supply only) even and smooth without using extra cement ( Externally), complete all as specified and directed.

Rendering 5 mm thick in cement motar (1:3) on ceiling finished even and smooth without using extra cement including three coat of white wash on ceiling including preparation of surface, complete all as specified and directed.

Supply only integral water proofing compound, ISI Marked, complete all as specified and directed.

Providing 15mm thick cement plaster in cement motar 1:3 using WPC as per manufacturer"s instructions over roof /sunken floor and finished surface even and smooth without using extra cement including taking down old treatment / plaster including paddling, sunken floors, removing existing bitumen treatment and brushing, cleaning of top surface of roof slab/ sunken floor etc., complete all as specified and directed.

Applying two coats of synthetic enamel paint on new steel surfaces over a coat to red oxide primer any description, not otherwise described over 10 cm width or girth, complete all as specified and directed.

Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces, complete all as specified and directed.

Preparation of new or previously untreated surface of concrete, asbestos cement surfaces, APP membrane of any description and applying two coat of aluminium paint over roof surfaces over 10 cm girth or width , not otherwise described, complete all as specified and directed.

Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over One Coat of Primer and other surfaces with alkali resistant priming paint on plasterd surfaces including 1mm thickwall care putty, complete all as specified and directed.

Preparing newly plastered surfaces of walls and applying two coats ofcement base paint over other surfaces with alkali resistant priming paint on plasterd surfaces, complete all as specified and directed.

Preparing old plastered surfaces of walls and applying a coat of cement base paint over One Coat of Primer and other surfaces with alkali resistant priming paint on plasterd surfaces, complete all as specified and directed.

Preperation of new or previously untreated Surfaces of steel of any description, two coats of synthetic enamel paint and priming with red oxide n.exc 10cm width or girth when unconnected with other painting or when painted in a different, complete all as specified and directed.

Complete removal of existing treatment of old plastered surface on wall including preparation of surface, complete all as specified and directed.

Preparation of old plastered surfaces of ceiling and applying two coat of white wash, complete all as specified and directed.

Non skid coloured ceramic tiles (Joint free) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor jointed in neat cement slurry and pointed with coloured cement to match over and including 15mm thick Screed bed or bedding in cement motar 1:4 including Roughening of existing floor surfaces, complete all as specified and directed.

Non skid coloured ceramic tiles (Joint free) 7 to 8 mm thick as in vertical surface, and jointal in cement slurry and pointed with white or Coloured cement to match the shed of tile over and including 10mm thick with cement plaster in cement motar (1:4) complete all as specified and directed.

Glazed ceramic tile 450 x 300 x 07mm thick (coloured) on vertical surfaces such as dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick cement plaster in cement and sand mortar 1:4, complete all as specified and directed.

Machine cut kota stone slab flooring 18-20mm thick as in riser of steps ,skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade or the slab including rubbing and polishing complete including 20 mm thick in CM 1:3 screed for laying Kota Stone, complete all as specified and directed.

Pre cast reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in manhole cover slabs and finishing the surface as per clause 4.11.16 and MES SR Part 1, complete all as specified and directed.

PCC 1:2:4 type B0 using 12.5mm graded stone aggregates as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles, complete all as specified and directed.

Green Marble work 18mm to 20mm thick (tabel rubbed and polished) in steps of staircase/kitchen platform (kitchen slab should not be laid in more than two pieces) and like in cement mortar (1:4) inclduing pointing in white cment (1:2) using marble dust with admixture of opigment ot match with marble shade of Green marble including 15mm thick screed bed/base in CM 1:4 (Including provision of hole for Gas pipe and moulding on edging of slab as directed by Engineer-in-Charge), complete all as specified and directed.

PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in 50mm parapet coping, complete all as specified and directed.

Reinforcement cement concrete (nomminal mix) type B1 1:2:4 (20mm graded stone aggregate) for Chajjas/Balcony/Landing work if any, complete all as specified and directed.

PCC 1:3:6 C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and directed by Engineer- in -Charge

Providing cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate ), 50mm thick as in plinth protection laid in bays not exceeding 2 Sqn each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight), complete all as specified and directed.

Cement concrete type C2 (1:3:6),40 mm graded aggregate in foundation, filling and mass concrete, complete all as specified and directed.

PCC (1:3:6) Type C1 using 20mm graded crushed stone agg as in surface channel & drain incl form work, complete all as specified and directed.

PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in padding in roof slab for leveling average thickness 50mm, complete all as specified and directed.

Reinforcement cement concrete (nomminal mix) type B1 1:2:4 (20mm graded stone aggregate) slabs supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck, slabs and in shelves and the like etc., complete all as specified and directed.

Formwork to fair finished sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and sides of drain; and similar work; vertical or to batter, complete all as specified and directed.

Formwork to sides and soffits/faccia of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, chajja, cantilevers, shelves including sup- ports, overhangs, etc., complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Vertical , Horizontal or sloping)sides including sup- ports, overhangs, for fair finished surface of concrete etc., complete all as specified and directed.

Form work to edges of concrete flats, floors and rools n.exc 20cm wide and side of RCC/PCC band in walls horizontal or sloping and similar work exc 5 cm but exc 10 cm, complete all as specified and directed.

Mild steel TMT steel bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hookings ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Mild steel bars 10mm dia round bars and over, cut to length bent to shape required including bending spirally for hopping for columns, hooking and send binding with and including mild steel wire (annealed) not less than 9mm dia or securing with clips and similar works conforming to Fe-410W (Gde E-250) quality A of Fe 290 (Gde E -165), complete all as specified and directed.

Mild steel TMT steel bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hookings ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B, complete all as specified and directed.

Supply and fixing mild steel framed work as in grills, gratings ladders etc with ends of bar shouldered and/ or riveted or welded or forged into spikes, framed guard bars, ladders, framed balusters etc and similar work conforming to Fe-290, grade E-165, complete all as directed at site. complete all as specified and directed.

10 mm dia 40mm Length Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and directed.

Mild Steel works for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron angle and plate fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Chain link fencing MS galvanisd fencing, any size or type, complete all as specified and directed. (Note - Dia of main bar 4mm and cross bar 4mm)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts etc including provission of binding wire and fixing with MS angle iron fencing posts, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Pre-painted galvalume aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self -tapping screws, complete all as specified and directed.

GI frame work 605 x 605mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and wev of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each web of 45mm suspended from sofit at approx x 900mm c/c with GI cleat and steel expansion fasteners with and including celing section (n.exc 1.2m length) of 0.55mm thickness having kruled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 c/ctied with support of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and including 4mm thick Non absetos fibre cement building board fixed or laid/inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed.

Rotational moulded polyethene water storage tank triple layer (ISI Marked) 1000 ltr Capacity (white in colour) hoisted and fixed in position including making necessary arrangement for fixing inlet, outlet and overflow pipe including dismantling of existing tank and including PVC float valve 20 mm bore, complete all as specified and directed.

Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 15mm, complete all as specified and directed.

Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 20mm, complete all as specified and directed.

Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 25mm, complete all as specified and directed.

Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 50mm, complete all as specified and directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

25mm bore GI tubing (medium grade) with all fittings and fixed complete fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

50mm bore GI tubing (medium grade) with all fittings and fixed complete fixed complete to walls and ceiling or laid in floors/Trenches, complete all as specified and directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete fixed complete to walls and ceiling or laid in floors/Trenches including taking down, complete all as specified and directed.

Cutting the existing 50mm dia/bore GI tubing any gradeand inserting new GI tee of size 50x50x25mm dia and including necessary screwing, threading, tail pieces,short pieces, jointing material etc, complete all as specified and directed.

Swivel shower of PTMT any colour for fixing with 15 mm pipe ,with shower arm of size 195 mm long with bend of 54 degree with flange of any colour (minimum weight 40 gm), supplied and fixed in repairs ,complete all as specified and directed.

PVC connection 15 mm size with PTMT nuts 450 mm long,complete all as specified and directed.

Aluminium anodised towel rail 20mm dia 'D' type 60 cm long between flanges, complete all as specified and directed.

Supply and fixing in repair cast copper alloy CP stop cock /angle Valve, fancy type, screwed both ends for iron pipe 15mm dia/ bore of pipe, complete all as specified and directed.

Supply and fixing in repair Gun metal , globe or gate valve ,with iron wheel head screwed both ends for iron pipe 20mm bore of pipe, complete all as specified and directed.

Supply and fixing in repair CP Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union 20mm dia, complete all as specified and directed.

CP angle valve/concealed stop cock (weight not less than 0.40Kg as mentioned in SSR part- 1 cl no. 18.14.2)of cast copper alloy (ISI Marked) chromium plated fancy type scrwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore incl add if fixed in repairs, complete all as specified and directed.

15 mm CP Bib taps (Long body and weight not less than 0.40Kg as mentioned in SSR part- 1 cl no. 18.14.2) , fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified and directed.

CP Brass wall mixture for mixing hot cold water supply screwed down incl connecting legs & wall flanges for iron pipe 15mm dia bore fancy type in repair, complete all as specified and directed.

PVC waste pipes 110mm dia in any length fixed to walls with PVC//MS holder but clamps and conforming to IS-1729, complete all as specified and directed.

PVC waste pipes 75mm dia in any length fixed to walls with PVC//MS holder but clamps and conforming to IS-1729, complete all as specified and directed.

PVC (SWR) pipe, Type B single socketed in any length with rubber ring joints laid in trenches or in floor upto 110mm bore, complete all as specified and directed.

PVC SWR Type B pipes ( pressure not less than 4 kg /cm2) single socket in any length with rubber ring joints laid in trenches or in floor for 75 mm bore, complete all as specified and directed.

PVC (SWR) Bends any radius for 110mm bore with access door, complete all as specified and directed.

PVC (SWR) Bends any radius for 75mm bore of any radius, complete all as specified and directed.

PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement, complete all as specified and directed.

PVC (SWR) Branch pieces single( Single Y) equal or unequal) for 110mm bore with oval access doors, complete all as specified and directed.

PVC branch pipes 110mm double equal or unequal ordinary or inverted (spigot or socket type) with paralled branches, complete all as specified and directed.

PVC junction, single, equal or unequal, ordinary or inverted with spigot or socket branch of 75mm bore with access door, complete all as specified and directed.

PVC (SWR) vent cowl 110mm, complete all as specified and directed.

PVC (SWR) vent cowl 75mm, complete all as specified and directed.

PVC junction, single, equal or unequal, ordinary or inverted with spigot or socket branch of 75mm bore with access door, complete all as specified and directed.

PVC valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs, complete all as specified and directed.

Vitreous china squatting pan "Orissa " pattern size 580x440mm white with integral foot rest all as fixed in repairs including ‘P’ or "S" trap, complete all as specified and directed.

Priming surfaces with bituminous primer @ 0.40Kg/Sqm for normal treatement (for moderate conditions), using glass fibre base bitumen felt, grade 2 ,as in roof and sunken floor treatment ,complete all as specified and directed.

Applying evenly a tack coat of industrial bitumen grade 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces ,as in roof and sunken floor treatment, complete all as specified and directed.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. APP membranne will be laid across the slop from lowest line of slopping roof toward ridge with minimum end lap of 150mm and side lap of 75mm bonded with hot blown ,as in roof and sunken floor treatment, complete all as specified and directed.

Over the APP membrane apply semi hot blown 85/25 grade bitumen penetration of bitumen when tested as per IS 1203 will not be more than 40/Confiming to IS 702 @ 1.20 Kg/Sqm including cleaning the surfaces ,as in roof and sunken floor treatment, complete all as specified and directed.

10mm dia PVC nozzles and injection grouting using Dr Fix IT URP 301 of M/s Pidilite Industries or equivlent make as in sunken floor/ceiling all as per manufacturer's instrutions. Note : Nos and location shall be as directed by Engr-in-charge., complete all as specified and directed.

Supply and fixing in repairs kitchen rack made out of 0.63mm thick stainless steel sheet wall mounted type with 5/6 partition of size 60 cms x 90 cms x 25 cm fixed on wooden gutties, complete all as specified and directed.

Supply and fixing in repairs sinks with drainage board made of stainless steel lmm thickkitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantileverbrackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed.

Excavating in post holes in soft/loose soil or Hard/dense soil (For Any type of Soil take avg of both) (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,watering, and removing surplus soil to a distance n exc 50 m and making good surface, complete all as specified and directed.

Repairs to balcony/Facia and soffit of chajjas etc by taking down old rendering 20 to 25 mm thick to match with the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm cm in width or girth incl preparatoin of suface and two coat of cement base paint /apex as reqd over one coat of primer/scaffolding work upto height of 7.0m, complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc in any type of soil and at any position, complete all as secified and directed.

Removing excavated material soils n.exc 50mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point, complete all as specified and directed.

Returning filling in, including, spreading, levelling, watering, and well ramming in layers not exc. 25cm, complete all as specified and directed.

100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in bed to drain pipes incls packing under, and haunching against the sides of pipes after they are laid and tested of bore 150mm dia drain pipe, complete all as specified and directed.

S & F repairs 150mm dia Reinforced concrete pipes ,class NP-3 laid and jointed including bends, collar etc set in cement mortar, complete all as specified and directed.

Construction of septic tank for 100 users (Brick construction) complete shown on drg No. CEUZ /TD-1585/2021 Sheet -1/4 to 4/4, complete all as specified and directed.

Construction of soakage well (Brick construction) 2.4m dia and 4.5m deep below inlet pipe level (depth from inlet pipe to ground level 45cm), complete all as specified and shown on drg No. CEUZ /TD-1585/2021 Sheet -1/4 to 4/4 complete all as specified and directed.

Grubbing up bushes , tree trunk portion n.exc 15cm including cutting of trees/bushes grown in over wall , digging out roots in roofs and below the ground level up to 1 m , filling holes and levelling of ground , stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and cleaning site, complete all as specified and directed.

Grubbing up bushes , tree trunk portion exc 30cm and n exc. 100 cm including cutting of trees/bushes grown in over wall , digging out roots in roofs and below the ground level up to 1 m , filling holes and levelling of ground , stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and cleaning site, complete all as specified and directed.

Grubbing up bushes , tree trunk portion exc. 15cm and n exc 30 cm including cutting of trees/bushes grown in over wall , digging out roots in roofs and below the ground level up to 1 m , filling holes and levelling of ground , stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and cleaning site, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan , llight socket or power socket) complete, incluing fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per condition separately) and making good disturbed surfaces of wall, floor etc., complete all as specified and directed.

Concealed Sub main wiring of two run with 06 sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through PVC conduit 20mm dia , med grade, ISI marked and fixed in concealed surface of wall,ceiling/false ceilling, including cutting /chasing as required and its accessories including one run of 6 Sqmm single core PVC insulated, FRLS , multi stranded copper conductor cable as earth continuity conductor in green color, connected to common earth dolly including taking down old unserviceable sub main wiring of any size , complete all as specified and as directed.

Point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. Modular flush GI box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.2mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface, complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used same make/brand only.

One light/fan/bell point controlled by one switch

One socket outlet 05 Amps on the same board

One socket outlet 05 Amps on independent board

One light point controlled by two way switch

Point wiring complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. modular flush GI box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.2mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface, complete all as specified and directed for the following:- (Note:- (i) All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used same make/brand only. (ii) Switch sockets 5/15 A , Switches, cover plate with frame shall be measured and paid separately in respective items

Ceiling rose, 3 terminal, PVC/Polycarbonate body, ISI marked, complete all as specified and directed .

Modular type switch 1 way, 6 Amp 1 module 240 volt, complete all as specified and directed.

Modular type switch 2 way, 6 Amp 1 module 240 volt, complete all as specified and directed.

Modular type Switch 16 amps, single pole 1 way, 1 module, 240 V, ISI marked, complete all as specified and directed.

Modular type socket shuttered type 6 amps 5 pin combined 2 module 240 V AC ISI marked, complete all as specified and directed.

Modular white cover plate with frame 3 module, complete all as specified and directed.

Modular white cover plate with frame 4 module, complete all as specified and directed.

Modular white cover plate with frame 6 module, complete all as specified and directed.

Modular type socket 6A/16A 6 pin combined shuttered socket 2 module 240 V, AC ISI marked, complete all as specified and directed.

Fan regulator modular type electronic fan regulator compatable with BLDC fan step type 100 watts, 2 module 240 volts AC ISI Marked, Complete all as specified and directed.

Calling Bell , Ding dong AC, 230 volt, single pole, complete all as specified and directed.

Modular Bell push 6 A, 1 module, 240 V, ISI Marked, complete all as specified and directed.

Supply and fixing in replacement Lamp holder, insulated body with back plate for batten fittings, complete all as specified and directed.

Supply and fixing in replacement of LED Lamp retrofit type 12 watt B22 base holder with polycarbonite body and heat sink type, complete all as specified and directed by Engr-in-charge . The specification of the LED bulb should meet the following:- (a) Housing of Light fitting : Polycarbonate (b) Operating voltage : 150v to 300v (c) Operating temprature : -10 to 45 degrees (d) Lumen efficacy : 100 lumen per watt (e) System lumen : Not less than 1200 lumens (f) Colour temperature : Not less tha 6500 k (g) Surge voltage protection : Up to 2.5KV (h) Ingress protection : IP20 Base B22 (j) Total harmonic distortion : not less than 20% (k) Power factor : not less than 0.90 (l) Input Frequency : 50 HZ (m) Line protection: Under/Over voltage protection

Supply and fixing in replacement of 10 watt Bulkhead Designed with beautiful aesthetics using new generation technology in LED to enliven your outdoor and indoor areas in perfect synchronization with functionality and aesthetics. Family of bulkhead Lights designed to compliment thegeometry of the area with modern design. High quality polycarbonate UV Protected milkydiffuser is used for glare free light distribution complete making connection and testing after fixing, all as specified and directed by Engr-in-charge.The specification of the panel light fitting should meet the following:- (a) Housing of Light fitting : Die cast Aluminium (b) Polycarbonate UV protected diffuser (c) Operating voltage : 140 v to 270v (d) operating temprature : -10 to 45 degrees (e) Lumen efficacy : 100 lumen per watt (f) system lumen : Not less than 900 lumens (g) Colour temperature : Not less than 5700K (h) Surge voltage protection : Up to 4 KV (j) Ingress protection : IP65 (k) Total harmonic distortion : not less than 20% (l) Input Frequency : 50 HZ

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete incl testing after fixing all as specified and directed by Engr-in-charge.The specification of the light fitting should meet the following:- (a) Housing of Light fitting : aluminium Extruded (b) Operating voltage : 150 v to 240v (c) operating temprature : -10 to 45 degrees (d) Lumen efficacy : 100 lumen per watt (e) system lumen : Not less than 900 lumens (f) Colour temprature : Not less tha 5700k (g) Surge voltage protection : Up to 2 KV (h) Ingress protection : IP20 (j) Total harmonic distortion : not less than 15% (k) Power factor : not less than 0.90 (l) Input Frequency : 50 HZ (m) Line protection : Under/ Over voltage protection

Supply and fixing in replacement Integrel sleek surface mounted Box Type with Polycarbonate Rod fixture( 4 feet length), 18 watt with integral electronic driver complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size cable incl testing after fixing, all as specified and directed by Engr - in-charge . The specification of the light fitting should meet the following:- (a) Housing of Light fitting : aluminium Extruded (b) Operating voltage : 150 v to 270v (c)Operating temprature : -10 to 45 degrees (d) Lumen efficacy : 100 lumen per watt (e) system lumen : Not less than 1800 lumens (f) Colour temprature : Not less than 5700k (g) Surge voltage protection : Up to 2 KV (h) Ingress protection : IP20 (j) Total harmonic distortion : not less than 15% (k) Power factor : not less than 0.90 (l) Input Frequency : 50 HZ (m) Line protection : Under/ Over voltage protection

Supply and fixing in replacement 35 watt Street light Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management,sturdiness, excellent corrosion resistant.New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07.Delivers excellent illumination Long life & photobiologically safe LEDs No harmful UV & IR radiations Environment friendly as it does not contain Mercury Instant light with low running temperatures Powered by integral, isolated electronic LED driver (SMPS based constant current supply) complete making connection and testing after fixing, all as specified and directed by Engr-in-charge. The specification of street light fitting should meet the following:- (a) Pressure die-cast aluminium alloy for housing (b) Operating voltage : 150 v to 270v (c) operating temprature : -10 to 50 degrees (d) Lumen efficacy : Not less than 95 lumen per watt (e) system lumen : Not less than 1900 lumens (f) Colour temprature : Not less than 5700K (g) Surge voltage protection : Up to 4 KV (h) Ingress protection : Not less than IP65 (j) Total harmonic distortion : not less than 10% (k) Power Factor : not less than 0.90 (l) Average Life :-50000 hrs (m) Line protection : Under/ Over voltage protection

Ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) incl taking down existing and deposit with MES, complete all as specified and directed.

Taking down old unserviceable DB any type and supply and fixing VTPN Verticale loadline double door distribution box (DB) are fitted with Bus bar neutral link, blanking plates of 4 way with suitable for incomming MCCB I/C frame having isolated neutral bar, mechanical impact strength IK09, door earthing suitable for MCCB upto 125 Amp, complete all as specified and directed.

MCCB 63 Amp, 16 KA, 4 pole, 415 Volt, 3 phase 4 wire suitable for VTPN DB, complete all as specified and directed

Supply and fixing in replacement sheet metal enclosure double door type for DBs single pole and neutral 8 way 240 V with 200 Amp bus bar including blanking plates where required incl fixed flush in wall chases wall for fixing DB and making good surfaces to match with existing surface, complete all as specified and directed.

Supply and fixing in replacement MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240 Volts,50Hz , ISI marked, complete all as specified and directed.

Supply and fixing in replacement MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240 Volts,50Hz , ISI marked, complete all as specified and directed .

Earthing complete with Steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level ) with top edge of plate not less than 1.5 mtr below ground level, connecting to galvanized iron earth wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel earth wire protected by provision of GI medium grade pipe 15mm bore including provn of concreate pit made from PCC 1:2:4 type B1(using 20 mm graded stone aggs) with 17mm thick cover of RCC (1:2:4) re-inforced with XPM (weight not less than 4 kgs per Sq mtr and frame of angle iron 25 x 25x 6mm with lugs to 02 Nos and with 6mm dia MS bar handle made to safe GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of 17mmx 8 mm FI with fixing arrangement , funnel , wire mesh and earth work in hard dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 mtr all as per electrical plate No 3 of SSR 2009 part I connected to earth test point. All as specified or indicated including testing on completion. Note : 1. The rate quoted is deemed to be included the followings :- (a) Excavation and earth work (filling in,ramming in layers, watering etc. as directed) in any type of soil for earth pit. (b) Perforated GI tubing light grade 15 mm bore dia 1.8 mtrs long for gi wire protection and watering. (c) Common salt and charcoal dust in alternative layers of 15 cm up to 60 cm above the top of earth plate all as directed. (d) Earth pit of internal size 600 x 600 x 600 built in PCC (1:3:6) bed 15 cm thick at bottom , brick work in CM up to 45 cm over PCC bed and PCC (1:3:6) coping 15 cm above embedded with MS angle 50 x 50 x 3 mm frame work duly painted with anti- corrosive bituminous paint, with and inclding RCC slab 50 mm thick in cement concrete (1:2:4) type 1, reinforced with XPM (weight not less than 4 Kg per Sqm) having lifting arrangement duly painted in green color and marking earth pit as directed.

Single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB of capacity 20 amp 240 volt and connecting electrically including taking down unserviceable MCB, ccomplete all as specified and directed.

Taking down exisitng unsv cable of size 16sqmm x4 core, complete all as specified and directed.

Supply and lay XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 16 sqmm 4 core, complete all as specified and directed.

Sub class 'B' bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

Sand cushioning in trenches including spreading and consolidation in layers of 8cm thick before laying the cable & 15 cm thick after laying the cable and punned down to form a bed, complete all as specified and directed.

Deduction to be made from BOQ for Sch 'A' Part - II (Schedule of credit) Amount of Rs. 746553.40 during AOC. Note: Tenderers shall not quote for this schedule.

Electromechanics Engineers & Contractors

Onkar Nath Bhalla And Sons Contractor Pvt. Ltd.

ASIA ENTERPRISES

d d builders