Job 1 Construction of Govt. Senior Secondary School, Boys, Una Tehsil and Distt. Una HP Sub Head C.O Building portion, Water Supply and Sanitary Installation, Rain Rain Harvesting Tank and Septic Tank etc.

Amount

Cutting in earth work and disposal of excavated earth upto any leads and lifts i as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Excavation in foundation trenches etcetera in all classification of soil such as pick work,jumper work,pick jumper work,blasting work and hard blasting work in dry or saturated condition upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable material separately as directed and then returning the stacked soil in 15cm(fifteen centimeter) layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by the Engineer in charge including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials .Any loss to the public /private property during the course of execution shall be abssolute respossibility to the contractor which shall have to be duly compensated by him in all cases as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Filling in plinth with sand under floor including watering ramming consolidating and dressing complete for all heights including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Excavation in drain and channels etcetera in all kind of earth work such as spade work, pick work, Jumper work, Pick jumper work, blasting work and hard blastig work chselling/wedging rock, etcetera including dressing of side and bed and disposing of excavated earth upto and leads disposed earth to be levelled and neatly dressed including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm ( thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforcement and plain concrete work in foundation footing and bases of columns etcetera and mass concrete including carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness upto all floor level including carriage of material entire within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square rectangular or polygonal in plan in any height in all floor level including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) size so as to give a fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in:- beams cantilevers girders and lintels side and soffit of beams ,beam haunchings, cantilevers, bressumers and lintels in any depth / heights /thickness upto all floor level including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters buttresses,plinth and string courses and the like upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter)so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing complete upto any floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work:- in edges of slabs and breaks in floors and walls etcetera upto any width /height complete upto all floor level including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (one cement: six sand:twelve graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth in all heights / depths including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1 : 5 : 10 ( one cement five sand :ten graded crushed stone aggregate 40mm(forty millimetre nominal size)mechanically mixed and curing complete excluding cost of form work in retaining walls/breast walls as per HP.PWD.,specifications upto all height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying cement concrete 1:3:6 (one cement: three sand:six graded crushed stone aggregate 20mm( twenty millimetre nominal size)mechanically mixed and curing complete excluding cost of form work in foundation and plinth upto all thickness/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying damp proof course 38mm (thirty eight millimeter)thick with cement concrete 1:2:4 (One cement:two sand:four graded crushed stone aggregate 12.5mm (twelve point five millimeter )nominal size) and curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100(eighty/hundred) or equivalent using 1.70 kg. (one point seventy kilogramme)per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimetre square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic metre mechanically mixed including curing complete excluding cost of form work and reinforced concrete work in foundation and plinth including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive including sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mixed mechanically, and curing complete to give a smooth and even surface including centering and shuttering etcetera but excluding cost of reinforcement in string course coping bed plates, anchor blocks plain window sills and the like Up to all heights complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing precast( GRC)cement concrete Jali (NTC Make )1;2;4 (one cement;two coarse sand ;four graded crushed stone agg 6mm(Six milimeters) nominal size ) including reionforced with 1.6mm(One point six millimeters) dia mild steel wire including centering and shutering roughing cleaning fixing and finishing in cement mortar 1;3 (one cement :three coarse sand ) etcetera plastering of the jamb sills and soffits complete in all respect .as per HPPWD specifications,and direction by the Engineer in charge including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in foundation,footing bases of columns and the like and mass concrete in all depth/heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in suspended floors, roofs, landing and shelves and their supports balconies beams,girders, bressumers and cantilevers upto all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in stair cases(except spiral stair case) excluding landing but including the preparing of the surface and finishing upto all heights in all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts up to all heights in all floor level complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in Walls (any thickness but not less than 0.10 metre (zero point ten meter thickness) including attached pilasters buttersses,plinth and string courses etcetera from top of foundation in all height/depth in all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Applying cement slurry on RCC slab or cement concrete work using 2.75 kg. (two point seventy five kilogramme) of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the concrete surface complete including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing in RCC work smooth finishing of the exposed surface with cement mortor 1:3(One cement:three sand) in all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing throating or plaster drip and moulding to R.C.C. chajja.including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying tor steel(TISCO, JINDAL PANTHER of (JSPL) /Sail/RINL/Shyam steel make) reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:6(one cement: six sand ) including curing complete in any depth/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in superstructure above plinth level upto all floor level /height in cement mortar 1:6(one cement: six sand ) including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Second class half brick masonry in common burnt clay building bricks in Cement mortar 1:4(One cement four sand) in foundation and plinth including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government..

Second class half brick masonry in common burnt clay building bricks in Cement mortar 1:4(One cement four sand) superstructure above plinth level upto all floor level including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction of the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Boulder filling dry hand packed under floor/retaining walls including watering, ramming and consolidating with at least one broken stone face and packed in proper upto all heights as per the direction of Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 19mm (Ninteen millimeter) thick water proof commercial board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etcetera complete make of Novapan, Kitply, National, Archid ply, Action Tesa, Green complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax, sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 19mm(Ninteen millimeter) thick water proof make of Novapan, Kitply, National, Archid ply, Action Tesa, Green commercial board in shelves/box for CB with butt joints and fixing with nails and screws complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 6mm(six millimetre) thick commercial plywood lining make of Novapan, Kitply,National,Archid ply Action Tesa,Green with butt jointing and nails (frame work and cover fillets to be measured paid for separately) including carriage of material within all leads and lifts.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing 1.00mm (one point zero zero millimeter) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets make of Novapan, Kitply, National, Archid ply, Action Tesa, Green ply including finishing of board cutfaces with edgeing tape of same shade /colour of laminaton sheet with approved adhesive and nails etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Providing and fixing square edge cover fillets beading 19x6mm (ninteen into six millimeter) section including mitring at junctions with nails 1st class Indian teak wood complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing MS chanel 75x40mm (ISLC) with ms flat 40x12mm in combination welde together to make one frame of door window clearstory window frame manufactured from M.S. angle iron section of 35mmx35mmx4mm and 50mmx4mm thickness mild steel flat in combination welded together to make one frame including hinges jamb, lock jamb, bed and if required angle threshold of mild steel angle 50x25mm (Fifty into twenty five millimeters) welded or rigidly fixed by mechanical means lugs with split and tails to each jamb including steel but hinges 2.5mm (Two point five millimeters) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing steel glazed doosr windows or ventilators of standard steel channels section 75x40mm with M.S.flat 75x4mm in combination welded togetherand standard Z- section style of standard size with mesh bars T-section 25x25x3mm and angle iron 25x3mm and joints metered and welded with 16x3.15mm lugs 100mm long embedded in cement concrete block 15x10x10cm. of 1:3:6 (one cement: into three sand: into six graded/ crushed stone aggregate) 20mm nominal size with wooden plug and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fitting including providing and fixing of glass panes with glazing clips and special metal putty of approved make complete including applying a priming coat of red lead paint or as directed by the Engineer-in-charge including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax, octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing angle iron cupboard frames manufactured from M.S. Angle iron section 25X25X5mm thickness including hinges jamb, lock jamb,beed and if required angle threshold of mild steel angle 25X25 mm welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineering- Charge. including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing flush door shutters Novapan, Kitply, National, Archid ply, Action Tesa, Green decorative type core of black board construction with frames of first class hard wood and well matched first class indian teak ply veneering with vertical grains or cross bends and face veneering on both faces of shutters 35mm(thirty five millimetre) thick including black enamelled M.S. butt hinges including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing M.S. grills of required pattern in wooden /steel/ PVC frames of windows etcetera with M.S. flats square or round bars with rounded headed bolts and nuts or by screws ornamental grill including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing aluminium sheet 1mm (one millimeter) thick in expansion joints vertically fixed with screws or nails complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 4mm(four millimetre) thick Alluminium Composite panel(ACP) (Zindal make) in partitions with butt jointing and nails (frame work and cover fillets to be measured andpaid for separately).including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing anodized aluminium(Zindal) sliding door bolts anodized colour or shade with bolts and nuts screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. 300×16mm(three hundred into sixteen millimeter)

Providing and fixing anodized aluminium (Zindal)sliding door bolts anodized colour or shade with bolts and nuts screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. 250×16mm(One hundred fifty into sixteen millimeter)

Providing and fixing anodized aluminium (Zindal)tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. i)200×10mm(two hundred into ten millimetre)

Providing and fixing anodized aluminium(Zindal) tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. . . i)150×10mm(one hundred fifty into ten millimetre)

Providing and fixing anodized aluminium(Zindal) tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. . . i)100×10mm(one hundred into ten millimetre)

Providing and fixing aluminum (Zindal)handles anodized transparent or dyed to required colour and shade with necessary screws etcetera including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. . . (a)125mm(one hundred twenty five millimetre)

Providing and fixing aluminum(Zindal) handles anodized transparent or dyed to required colour and shade with necessary screws etcetera including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .. (a)100mm(one hundred millimetre

Providing and fixing aluminum(Zindal) handles anodized transparent or dyed to required colour and shade with necessary screws etcetera including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .. (a)75mm(seventy five millimetre

Providing and fixing 50mm(fifty millimeter) bright finished brass cup board ward robe knob (Zindal) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 65x35mm( sixty five into thirty five millimetre)special qualtity bright finished brass cup board locks or ward robe locks with six levers(Harison or its equivalent) including entire carriage of material within all leads , lifts and other incidental.The rate are inclusive octroi, royality,malkhana ,sale tax,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing 100mm(one hundred millimetre) bright finished brass door stopper (Zindal or its equivalent) with rubber cushion screw etcetera to suit shutter thickness complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 150mm ( one hundred fifty millimetre ) bright finished hard drawn hooks and eyes including entire carriage of materials within all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 12mm thick (twelve millimetre ) thick and 100mm (hundred millimetre )wide pelmet with 25mm (twenty five millimetre )dia wooden curtain rod and brackets including fixing with 25x3mm ( twenty five into three millimetre ) M.S. flat 10cm. Long and plugs etcetera complete including entire carriage of material within all leads , lifts and other incidental. The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 10 mm(ten millimetre) dia bright finished brass ball catcher complete including entire carriage of material within all leads , lifts and other incidental. The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing bright finished brass heaps and staples (safety type) with necessary screws etcetra complete 150mm (one hundred fifty millimetre) size including entire carriage of material within all leads , lifts and other incidental. The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive including entire carriage of material within all leads , lifts and other incidental. The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying Kota stone mirror polished in uniform colour 55x55cm.slab flooring 20mm(twenty millimeter)(average) thick base of cement mortor 1:4(one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 25mm(Twenty five millimeter) thick upto any floor level /height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying Kota Stone mirror polished in uniform colour ,210x30cm, minimum size flooring 20mm average track base of cement mortar 1:4 ( one cement : four sand) laid over and joints with gray cement slurry round with pigment to match the shade of slab including rubbing and polishing complete 25mm(twenty five millimetre) thick as approved pattren finish.including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying Kota stone having size 55x10cm (fifty five into ten centimetre) mirror polished in uniform colour slab 25mm(twenty five millimetre) thick in risers of steps, skirting dado and pillars laid in 12mm(tweleve millimetre) thick in cement mortar 1:3 (one cement :three sand) and jointed with grey cement and pigment to match including rubbing and polishing complete as approved pattern finish.including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying Kota stone having size 210x17cm(two hundred ten into seveenten centimetre) mirror polished in uniform colour slab 25mm (twenty five millimetre)thick in risers of steps, skirting dado and pillars laid in 12mm thick in cement mortar 1:3 (one cement : three sand) and jointed with grey cement and pigment to match including rubbing and polishing complete as approved pattern finish.including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying Baroda green granite stone in flooring 20mm(twenty millimetre ) (average) thickness base of cement mortar 1:3(1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20mm (twenty millimeter ) thick upto any floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying marble work(table rubbed and polished ) in flooring 20mm thick base in cement mortar 1:3(one cement: three sand)i/c jointing with CM 1:2(one cement: two marble dust) with an admixture of pigment to match the shade of the marble 20mm thick white makrana marble.including carriage of material with in all leads and lifts and other incidentalsThe rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. white markana marble

Making moulded nosing in marble stone including returned moulded ends and angles to moulding including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government. .

Providing and fixing 10mm(ten millimeter) thick double charged polished anti skid water proof stain and impact resistent heavy duty vetrified tiles Orinet/Kajaria/Nitco /orient /RAK/Somany Johnson and Johnson (600x600x10mm)(six hundred into six hundred into ten millimeter)manufactured of approved shade and colour in flooring treads of steps and landing laid on a bed of 12mm(twelve millimeter) thick cement mortor 1:3( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as required complete upto all floor level/ height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying Duro stone vetrified tiles double charge Orinet/Kajaria/Nitco /Rak/somany/ Johnson and Johnnson/orient (600x600x8mm)(six hundred into six hundred into eight millimetre) in grey/ coloured of approved shade in skirting risers of steps and dado on 12mm(twelve millimetre) thick cement mortor 1:3( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete Up to all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing Antiskid nonslipery ceramic tiles 300mmx300mmx 5.5 mm ( three hundred into three hundred into five point five miilimeter) thick Orinet/Kajaria/Nitco /Rak/somany/ Johnson and Johnson /orient treads of step laid on bed of 12mm (twelve millimeter ) thick cement mortar 1:3 (one cement :three sand ) and jointing with neat cement slurry upto floor all level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

White glazed tiles 300x300x6mm(three hundred into three hundred into six millimeter ) Orinet/Kajaria/Nitco /Rak/somany/ Johnson and Johnson/orient thick in skirting risers of steps and dado 12mm(twelve millimeter) thick cement mortor 1:3 ( one cement: three sand) and jointed with neat cement slurry including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

40 mm(forty millimetre) thick cement concrete flooring 1:2:4 (one cement: two sand : four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size laid in one layer finished with a floating coat of neat cement. including carriage of material with in all leads and lifts and other incidentals. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Cement plaster skirting upto 30cm height with cement mortar 1:3 ( one cement : three sand) finished with a floating coat of neat cement, including rounding of junction with floor 15mm(ffteen millimetre)thick including carriage of material with in all leads and lifts and other incidentals. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Extra for providing and fixingglass strips in joints of terrazzo floors.40 mm(forty millimetre) wide and 4 mm(four millimetre) thick.including carriage of material with in all leads and lifts and other incidentals. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing 2mm(two millimetre) thick Supreme antibacterial PVC antistatic Venyl flooring of (LG Hausys or its Equivalent) flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub floor (damp proof treatment to be paid for separately). ncluding carriage of material with in all leads and lifts and other incidentals. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying 19 mm(Ninteen millimeter) thick Mandana red stone slab in uniform shade size 60x60cm(sixty into sixty centimeter) in flooring on 20mm (twenty millimeter)average thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete upto floor all level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying 19 mm(Ninteen millimetre) thick Mandana red stone of size 60x60cm(Sixty into sixty centimeter) in uniform shade in treads and risers of steps on a bed of 20mm(Twenty millimeter) thick cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including preparing of nosing including rubbing and granite polish finish complete upto floor all level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,,GST,labour cess or other taxes imposed by the Government. .

Providing and laying 80mm(eighty millimetre) thick Prepolished NTC heavy duty precasts cement concrete interlocking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub base of concrete with 25mm thick average thickness of cement mortar 1:4(One cement:four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing polishing complete .in pattren finish of approved ,colour and shade(sub base concrete floor to be paid for separately including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,,GST,labour cess or other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters (Tata Durashine make)with vertical channels 20mmx10mm x 2mm(twenty into ten into two millimeter) and braced with flat iron diagonal 20mmx 5mm(twenty into five millimeter) size with top and bottom rail of lock including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing pre painted steel sheet (Tata Durashine make) in roofing over all steel trusses providing and fixing with hot applied metallic zinc coated sheet pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimetres) thickness having 1060 mm (one thousand sixty millimeter) cover width, overall width 1126mm (one thousand one hundred twenty six millimetre), 28mm (twenty eight millimetres) crest depth at 353+2mm (three hundred fifty three plus two millimetre) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimeters). The main crest width at top of 25mm (twenty five millimetre) and at lower 81mm (eighty one millimetres) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length with as required with EPDM seal complete up to all floor level /height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing pre painted steel(Tata Durashine make)sheet in ridges having proper Gola of plain prepainted or hips 60cm (sixty centimetre) overall with hot dipped metallic zinc coated, over steel section, pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimeters) thickness having 1060 mm (one thousand sixty millimetre) cover width, overall width 1126mm (one thousand one hundred twenty six millimetre), 28mm (twenty eight millimetre) crest depth at 353+2mm (three hundred fifty three plus two millimetre) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimetre). The main crest width at top of 25mm (twenty five millimeters) and at lower 81mm (eighty one millimetre) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of 5 (five) microns over 5 polyster (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length complete with all accessories as required with EPDM seal complete up to all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing Valleys 60cm (sixty centimeter) overall with hot dipped metallic zinc coated, Kolar Metal or its equivalent make over steel section, pre painted sheet (Tata , Durashine make) single skin trapezoidal profile sheeting 0.60 mm (zero point six zero millimeters) thickness having 1060mm (one thousand sixty millimeters) cover width, overall width 1126mm (one thousand one hundred twenty six millimeters), 28mm (twenty eight millimeters) crest depth at 353+2mm (three hundred fifty three plus two millimeters) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimeters). The main crest width at top of 25mm (twenty five millimeters) and at lower 81mm (eighty one millimeters) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of polyester to back coat of 5 (five) microns over 5 (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length complete with all accessories are required with EDPM seal complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing flushing 38cm (thirty eight centimeter) overall with 0.60mm (zero point sixty millimeter)thick prepainted sheet (Tata , Durashine make) in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimeter) dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 30cm(thrity centimetre) wide 90cm(ninety centimetre) over all semicircular 0.60mm thick prepained sheet (Tata /Durashine make ) gutter with iron brackets 40x3mm size bolts and nuts and washers etc. i/c making necessary connections with rain water pipe complete as per design including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing M.S.BP sheet(Tata Durashine make) 1.66mm to 2mm(one point sixty six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting,fixing and welding to steel roof members and applying a coat of red lead primer complete as per instruction of Engineer-in-charge(Base members of steel work shall be measured & paid separately) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing PVC stay and clamps for rain water pipe 110mm(One hundred ten millimeter) dia (Finolex supreme AKG Prince ,Kisan SFMC Displast make ) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 100mm(one hundred millimeter) dia on wall face PVC Finolex, supreme ,AKG prince, Kisan ,SFMC Diplast makerain water pipe of working pressure not less than 4.5 kg (four point five kilogramme)per square centimeter including filling the joints with approved adhesive complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast) Finolex supreme, AKG,Prince Kisan, SFMC, Diplast make accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain bend 110/ 150mm ( one hundred ten/one hundered fifty millimeter) dia including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast) Finolex supreme, AKG,Prince Kisan, SFMC, Diplast make accessories for rain water pipes including filling the joints with approved adhesive complete PVC concrete type bend 110/ 150mm ( one hundred ten/one hundered fifty millimetre) dia including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast) Finolex supreme, AKG,Prince Kisan, SFMC, Diplast make accessories for rain water pipes including filling the joints with approved adhesive complete PVC shoe 110/ 150mm ( one hundred ten/one hundered fifty millimeter) dia including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Steel work (TISCO, JINDAL PANTHER of (JSPL) /Sail/RINL/Shyam steel make) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint complete in all respect in trusses and trussed purlins in buildings upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Steel work(TISCO, JINDAL PANTHER of (JSPL) /Sail/RINL/Shyam steel make) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint complete all respect In grating, framed guard bars ladders, railing brackets and similar works upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Steel work(TISCO, JINDAL PANTHER of (JSPL) /Sail/RINL/Shyam steel make) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In beams joists channels, angles, tee , flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like complete in all respect upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing MS round (Tata /Sail/Shyam steel Tisco Ring ,Jindal,Panthera(J SPL) make holding down or anchor bolts with nuts and washers plates complete all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll taxsale tax,,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing moulded hand rail of MS ( Tata, Jindal(Hisar) Parkash sheel Tube bhushan industries make) hollow pipe 50mm(fifty millimetre ) dia welded in straight length over MS flat at top of vertical balusters including one coat of red oxide priming coat complete all respect (MS flat and balusters or railings shall be measured and paid separately including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Applying priming coat Nerolac, Berger,Asian paint shalimar ,ICI,make over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting complete all respects including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Painting of two coats with Nerolac, Berger,Asian paint ICI(Dulax Glass)Luxol High Glass)(Premium Apcolite Glass) Shilmar make (excluding priming coat) over new wood and wood based surfaces with enamel paint other than white brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping with white enamel paint.including carriage of material with in all leads and lifts and other incidentials The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Painting two coats (excluding priming coat) with Nerolac, Berger,Asian paint ICI(Dulax Glass)Luxol High Glass)(Premium Apcolite Glass) shalimar makeon new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, including carriage of materials within all leads and lifts. The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. Enamel paint other than white

Polishing two coats Nerolac, Berger,Asian paint Brand with French polish on new wood and wood based surfaces to give an even surface by including cleaning the surface of all dirt, dust and sand papered smooth including a coat of wood filler including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and applying of Birla white level plast over prepared surface including grinding, chiseling, pre-wetting. Cleaning with wire brush to remove dirt,dust, grease oil etcetra level ceiling plaster with level D-plast to be mixed throughly with mechanical stirrer manually by adding 23 to 26% of clean potable water and waiting for 5 to 10 minutes before application coat thickness to be between 3-12mm After cleaning the surface patch coat of level plast to be applied to ceiling to fill all pores honey combing areas using hand trowel.After complete dryng of patch plaster finish coat of level plast applied with hand trowel and finishing the same with aluminium bottom.At the time of application applicator should wear hand gloves while using level plast Providing and applying 2 coats of Birla white wall care putty with a maximum thickness of 1 to 1.5mm over base coat of level plast including pre-wetting,cleaning of blade marks , removal of loose particle etcetera WCP to be mixed thoroughly with mecahnical stirrer/ manually by adding 35 to 40% of clean potable water and waiting for 5 to 10 minutes before application.Second coat to be applied after 2 to 3 hours of complete drying of Ist coat and after rubbing with emery paper of size 500 and above to remove the putty blade marks including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level/height including arrises, internal rounded angle, chamfers and/or rounded angles not exceeding 80mm(eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 (1 cement : 6 sand) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

15mm (fifteen millimetre)cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement :six sand) including curing and entire carriage of material with in all leads and lifts and other incidentals .The rate inclusive sale tax octori, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government..

20mm (twenty millimetre)cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in all floor level/height including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six sand) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

20mm (twenty millimetre)cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in all floor level/height including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(Eighty millimeter) in girth and finished even and smooth in cement mortar 1:4 ( one cement : four sand) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 12 mm wide and 12 mm deep groove including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

15mm (fifteen centimetre)thick plain cement morter band in cement morter 1:4(onecement :four sand upto 300 mm(three hundred millimetre) in width Raised Band including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping dust loose materials and other foreign matter sand papered smooth to give final finish to the surface complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Applying priming with cement primer coat on new concrete/ masonry/ asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with :-ready mixed primer including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Wall painting (two) with acrylic emulsion paint of Nerolac,Berger, Bison Acrylic )Asian paints(Tractor Acrylic ) Shalimar make approved brand and manufacture for interior grade an undecorated wall surface give an even shade including thoroughly brushing the surface to given an even shade including thoroughly brushing the surface free from mortor droppings and other foreign matte and sand papered smooth applying a putty a required for metling the surface including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Painting two coats (excluding priming coat) make of ICI(Dulux glass) Nerolac, BergerLuxol High Glass)Asian Paints(Premium Apcolite Glass) Shalimar make on new concrete / masonry/ plastered surfaces with enamel paint of approved brand and manufacture for use on floors to give an even shade, including cleaning of all dirt, dust and other foreign matter and sand papering as required with enamel paint including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Distempering (two coats) with oil bound washable distemper with Berger (Castle)Jenson and Nictolson)(J & N) Golden paints Aqualace make and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly burshing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Distempering with dry distemper of Berger(Castle)Jenson and Nicholson (J & N) Golden,Paints Aqualace make approved brand and manufacture(Two coats)and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings andother foreign matter including preparing the surface even and sand papered smooth.including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Abexlutime) or its equivalent on undecorated will surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etc. including sand papered smooth complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing plinth protection 50mm(fifty millimetre ) thick in cement concrete 1:3:6(one cement: three sand: six graded crushed stone aggregate 20mm( twenty millimetre ) nominal size including entire carriage of material with in all leads and lifts and other incidentialsThe rates are inclusive octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm(seventy five millimeter) thick (unconsolidated) bed or dry brick/stone aggregate 40mm(forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including entire carriage of material with in all leads and lifts and other incidentialsThe rates are inclusive octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall.15x22 cm (fifteen into twenty two centimeter ) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement:six Sand) including earth work and laying 10 cm ( ten centimeter ) cement concrete in 1:5:10 (one Cement : five Sand: ten graded stone aggregate) of :40 mm(forty millimeter ) nominal size and 7.5 cm (seven point five centimeter ) cement concrete 1:2:4 (One Cement : Two Sand : Four Graded stone aggregate of 20 mm(twenty millimeter ) nominal size and finished with a floating coat of neat cement complete as per standard design including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.ii) IInd course of 20 mm cement plaster 1:3 (one cement : three coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Grading roof for water treatment with cement concrete 1:2:4(One cement:two sand: four graded stone aggregate 20mm(twenty millimetre ) nominal size upto all heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing readymade steel Godrej almirah made of superiour quality having four shelves and internal chest and other fittings and powder coated paint in all side complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing readymade steel rack size 1.20x1.80 of Godrej make of superiour quality having four shelves and internl chest and all fittings complete and powder coated paint in all side complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing readymade steel locker with almera size 1.20x1.80 Godrej make of superiour quality having four shelves and internl chest and all fittings complete and powder coated paint in all side complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fxing 12mm thick green Chalk board having size 3.00x1.50mtr (Non magnetic) with superior quality framing specially anodized alluminum proffile 20x15mm with corners of black surface shall be non porous ceramic particles on the top green surface for smooth writing with chalk over 11mm thick particle board which shall have backing materials of galvanised sheet 0.28mm thick approx the board shall be fixed on the wall with specially designed J clamp and square clamps with the help of nylon sleves and screws etcetra complete. including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. 300×16mm(three hundred into sixteen millimeter)

Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing vitreous china wash down, water closet squatting pan (Indian type WC pan ) size 580mm (five hundred eighty millimetre) (earth work, bed concrete ,foot rest and trap to be measured and paid for separately) (Orissa pan WC No. 2071 size 58x44 cm (fifty eight into forty four centimetre) in metalic shade of Cera Parryware Hndware, Sanitary ware, Neycer make including carriage of material with in all leads and lifts and other incidentals

Providing and fixing vitreous china wash down water closet (European type WC pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 ( 1cement : 1 sand )( Seat and cover to be measured and paid for separately ) (ii) Anglo Indian WC (Universal ) No.2090 of Cera Parryware Hindware, Sanitary ware, Neycer make closetincluding carriage of material with in all leads and lifts and other incidentals

Providing and fixing 100mm(one hundred millimetre) size P or S trap for water closet(Squatting pan)including jointing the trap with the pan and soil pipe in cement mortor 1:1(One cement:one sand) sand cast iron including carriage of material with in all leads and lifts and other incidentals

Providing and fixing PTMT coloured/white high density polythene poly propylence 10,litres capacity (Full flush) European standard control low level flushing cistern prayag make with fittings with a pair of brackets with fitting such as lead valve , syphons 15mm nominal size PVC ball valve with polythene float with push button, couplings for connection with inlet outlet and over flow pipe 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the plinth flush bend with cisterns and closet (over flow pipe to be measured and paid for seperately including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing plastic seat commender, Diplomat, Hindware, Urional, Sera make (solid/Hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers solid type (i)white plastic seat and cover including carriage of material in all leads and lifts and other incidentals.

Providing and fixing vitreous China wash basin with single hole for pillar tap with CP or M.S. brackets painted white including cutting holes and making good the same but excluding fittings flat back Wash basin No. 10010 size 630mmx450mm(Six hundred thirty millimetre into four hundred fifty millimetre) in white shade of Cera hindware Parryware sanitary ware, Neycer or its equivalent make including carriage of material with in all leads and lifts and other incidentals

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings in white shade make of Parryware, Hindware sanitary ware, Neycer Cera make including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink AMC,Unik,Diamond, Neelkanth with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting 610 x 510 mm (six hundred ten into five hundred ten millimeter) with bowl depth 200 mm(Two hundred seventy eight millimeter) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter)dia CP brass waste (heavy duty ) Kingston, Gem ,Parko, Techno, Jal,ESS ESS, Jaquar, Seiko for wash basin or sink complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter)dia PVC waste pipes Kingston, Gem ,Parko, Techno, Jal,ESS ESS, Jaquar, Seiko for wash basin or sink including brass check nut complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 600mm x 450 mm(six hundred milimeter into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on plastic sheet and fixed to plastic plugs with CP brass screws and washers make of Atul, Modiguard, Golden Fish complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing CP brass to towel rail complete with CP brass brackets fixed to wooden; plugs with CP brass 600×20mmof Continental series No ACN-1111SM -7711 of hindware ,Cera Make.or equivalent including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government..

Providing and fixing 600mmx120mm(six hundred into one hundred twenty millieter) glass shelf with CP brass brackets and guard rail fixed to wooden plugs with CP brass screw of Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screw Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko including entire carriage of material with in all leads and lifts and other incidentalsThe rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing vitreous china division plate make of Parryware ,Hindware Sanitarware Neycer Cera for urinal size 600x300mm(six hundred into three hundred millimetres) including carriage of material with in all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing CP brass bib tap with capstan head 15mm dia Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing C.P. brass pillar tap with capstan head 15mm dia Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing CP brass angle valve 15mm dia without nuts and pipe Continental series No CON -053KN of ,JAL,Jaquar , Kingston,Gem,Parko Techno ESS including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260mmx350 and 340x430x265mm sizes respectively with automatic flushing cistern with fittings RS or CI brackets standard size galvanised steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings cutting and making good the walls floors where required including carriage of material with in all leads and lifts and other incidentals a) one urinal basin with 5 litres automatic flushing cistern make of parryware ,Hindware, Saintarywark Neycer, Cera including cariage of material within all leads and lifts and other incidentials.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260mmx350 and 340x430x265mm sizes respectively with automatic flushing cistern with fittings RS or CI brackets standard size galvanised steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings cutting and making good the walls floors where required including carriage of material with in all leads and lifts and other incidentals d) Range of three urinal basinswith 15 litres C.I. Automatic flushing with auto cistern make of parryware ,Hindware, Saintarywark Neycer, Cera including cariage of material within all leads and lifts and other incidentials.

Providing and fixing C.P.brass toilet paper holder Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko including entire carriage of material with in all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing PVC connection pipe Kingston, Gem, Parko Techno, JAL, ESS, JAGUAR, Seiko with brass union 45cms. Length 15mm nominal bore (fifteen millimeter) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) nominal bore brass fullway valve with wheel leader Sant L &K Zoloto , make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 20mm(twenty millimeter) nominal bore brass fullway valve with wheel leader, Sant L & K Zolato make complete all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) nominal bore brass ball valve leader, Sant L & K Zolato make(horizontal plunger type) high pressure with polythene plastic floats complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) IVC, leader, Prayag make ferrule including borning and taping the main including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Making connection of galvanised steel branch with galvanised mild steel main 20mm nominal bore (twenty millimetre nominal ) by providing and fixing tee including cutting and approved adhesive complete including enitre carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 (one cement : two sand : four graded stone aggregate ) 20mm(twenty millimetre) nominal size foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm(forty millimetre) nominal size inside plastering 15mm (fifteen milimetre) thick with cement mortar 1:3 (one cement : three sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement :two sand : four graded stone aggregate 20mm (twenty millimetre)nominal size finished smooth complete including curing and testing. Inside size 800mm x 800 mm x 500 mm (eight hundred millimetre x eight hundred millimetre x five hundred millimetre) deep including C I cover with frame (Light duty single seal pattern I) 455mm x 610 mm (four hundred fifty five milimetre into six hundred ten millimetre) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilograms) weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 200mm (two hundred millimetre) thick brick walls of masonry using common burnt clay building bricks in cement mortar 1:3(one cement: three sand ) and curing complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 (one cement : two sand : four graded stone aggregate ) 20mm(twenty millimetre) nominal size foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm(forty millimetre) nominal size inside plastering 15mm (fifteen milimetre) thick with cement mortar 1:3 (one cement : three sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement :two sand : four graded stone aggregate 20mm (twenty millimetre)nominal size finished smooth complete including curing and testing. Inside size 800mmx800mm and 1000mm ( eight hundred milimetre into eight hundred millimetre into one thousands millimetre) deep including CI cover with frame (light duty single seal pattern-I) 455mmx610mm(four hundred fifty five milimetre into six hundred ten millimetre) internal dimensions total weight of cover and frame to be not less than 38 kg ( thirty eight kilograms) weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 200mm (two hundred millimetre) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(one cement: three sand ) and curing complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade 'A' Prefect, Hind or ISI marked S.W.pipes complete with CI grating brick masonry chamber in cement mortar 1:5(one cement:five sand) and water tight C.I. cover with frame of 300mm×300mm (three hundred into three hundred millimetre)size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg square mouth trap 100mm x100mm (one hundred into one hundred millimetre)size P-type complete all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing to wall ceiling floor galvanised mild steel tubes (Medium grade) BST, Jindal(Hissar), Tata steel Tubes Ltd. Prakash surya make tube fittings and clamps(Medium grade) tube fitting and clamps including making good the wall ceiling and floor 15mm(fifteen millimetre) nominal bore including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing to wall ceiling floor galvanised mild steel tubes (Medium grade)BST, Jindal(Hissar), Tata steel Tubes Ltd. Prakash surya tube fittings and clamps(Medium grade) tube fitting and clamps including making good the wall ceiling and floor 20mm(twenty millimetre) nominal bore including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing ploytheline aluminium polythylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 water supply including clamp at one metre spacing cutting fixing and making good the wall etcetra but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall of BST, Jindal(Hissar), Tata steel Tubes Ltd. Prakash surya make including carriage of material with in all leads and lifts and other incidentals The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government i) 1216 (16mm O.D. pipe )

Providing and fixing ploytheline aluminium polythylene (PE-AL-PE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 water supply including clamp at one metre spacing cutting fixing and making good the wall etcetra but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall of BST, Jindal(Hissar), Tata steel Tubes Ltd. Prakash surya make including entire carriage of material with in all leads and lifts and other incidentals The rate inclusive octroi, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government ii) 1620 (20mm OD pipe )

Providing and fixing PE-AL-PE- composite internal seal compressing fittings Unik, KS. Amco. AVR. NVR. RR. Suw as per IS-15450-2004 for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government a. i) Equal tees 1216 of (kitec/ Kisan make )

(ii) Equal Tee 1620

(i) Redueing Tee 1620x all branches

ii) Reducing Tee-2025x2025 with all branches

(i) Female branch Tee 1216x1216x15mm thread

ii) Female branch Tee 1620x1620x20mm thread

(i) Female elbows 1216x15mm thread

(ii) Female elbows 1620x15mm thread

(i) Male thread connector 1216x15mm thread

(ii) Male thread connector 1620x15mm thread

(i) Fe-male thread connector 1216x15mm thread

(ii) Fe-male thread connector 1620x15mm thread

(i) Couplers 1216

(ii) Couplers 1620

(i) Reducers 1620x1216

(ii) Reducers 2025x1216

Providing and fixing 110mm dia (one hundred ten millimetre)with working pressure to be not less than 4.50kg(four point fifty kilogramme)in PVC pipe Finolex make spigot and socket , waste and ventilating pipes ISI marked including fixing with approved adhesive etcetra complete including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc.complete150mm(One hundred fiftymillimeter) dia of Finolex make including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC water storage tank ISI 12701 marked of approved brand and make (Sintex ) with 40mm (forty milimetre) nominal bore galvanised mild steel scour tube with fitting, 25mm(twenty five milimetre) nominal bore galvanised mild steel over flow tube with fittings and mosquito proof coupling of approved municipal design 15mm (fifteen milimetre) nominal bore ball valve and cover with locking arrangement providing pads of required sizes for inlet and outlet etcetera . complete including hoisting at roof level height 2000 litres (two thousand)net capacity tank complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC water storage tank ISI 12701 marked of approved brand and make (Sintex ) with 40mm (forty milimetre nominal bore galvanised mild steel scour tube with fitting, 25mm(twenty five milimetre) nominal bore galvanised mild steel over flow tube with fittings and mosquito proof coupling of approved municipal design 15mm (fifteen milimetre) nominal bore ball valve and cover with locking arrangement providing pads of required sizes for inlet and outlet etcetera . complete including hoisting at roof level height 1000 litres (one thousand)net capacity tank complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC floor trap Finolex make of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etcetra complete 110mmx75mm (One hundred ten into seventy five millimetre)) including entire carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing 110mm dia(one hundred ten millimetre)PVC single equal branch with oval access door Finolex make insertion rubber washer 3mm thick bots and nuts complete including fixing with approved adhesive etcetra complete including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC door bend Finolex Make with oval access door, insertion rubber washer 3mm(three millimeter) thick bolts and nuts (High Pressure) complete including fixing with approved adhesive etcetera complete 110mm(one hundred ten millimetre) dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimetre )dia Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etcetera Complete , 110mm (one hundred ten millimetre) dia Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etcetera Complete , 150mm (one hundred fifty millimetre) dia Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etcetera complete 110mm(one hundred ten millimetre) nominal size Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC Double equal branch with oval access door insertion rubber washer 3mm (three milimeter) thick bolt and nuts complete including fixing with approved adhesive etc. complete (i) 110mm ( one hundred ten millimetre ) dia Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC plain double equal branch ISI markedincluding fixing with approved adhesive etcetera complete Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. 110mm ( one hundred ten millimetre ) dia

Providing and fixing PVC Cowl Finolex Make(High Pressure)complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.110mm (one hundred ten millimeter ) dia

Providing and fixing PVC stay and clamps ISI marked of approved design with steel screws and rawl plugs etcetera complete Finolex Make(High Pressure)including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .. 110mm (one hundred ten millimetre ) dia

Providing and fixing 100mm (one hundred millimeter) dia CP grating of superior quality for floor ,gully or Nahani trap Prefest, Hind or ISI marked S.W.pipes make including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing Mixer for Kitchen sink with casted swinging spout at top including carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing two hole basin mixing faucet .ISI mark No. 8934 of JAL/ESS-ESS or its equivalent including carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing wall mixing faucet for shower and bath hand shower with Angular and Rest Holder..Of Continental series No CON -053KN of ,JAL,Jaquar , Hindware Make or its equivalent including carriage of material with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 40mm (forty millimetre) dia CP Gar bar pipe including screws complete JAL/ESS-ESS Kingston Green Parks, Techno,Jaguar,Seiko make including carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 8mm(eight millimetre) dia C.P/S.S.Jet with flexible tube upto 1.00 meter (one meter) with S.S.trangular plate Euoropean type WC make of Cera/ Jaguar/hindware including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10(one cement:five sand: ten graded stone aggregate 40mm(forty millimetre) nominal size for surround or encasing PVC pipes 110mm(One hundred ten millimetre) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10(one cement:five sand: ten graded stone aggregate 40mm(forty millimetre) nominal size for surround or encasing PVC pipes 150mm(One hundred fifty millimetre) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Supplying CI cover lighty duty rectangular 455x610mm(four hundred fifty five into six hundred ten millimetre) without frame for man holes complete weight 23kg(Twenty three kilogramme)(Single seat pattern-1)including entire carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked and fixing with the approved adhesive etcetera Finolex make complete 75mm (seventy five millimetre) dia including carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 75mm dia (Seventy five millimetre) dia PVC Cowl/Cap. Finolex Make(High Pressure)complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.75mm (seventy five millimetre ) dia

Providing and fixing 200mm dia (Two hundred millimetre) wide cast iron rungs with chequered or ribbed non slip surface in manhole with 200x200x100mm (two hundred into two hundred into one hundred millimetre) cement concrete 1:3:6(one cement:three sand: six graded) stone aggregate 20mm nominal size including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.75mm (seventy five millimetre ) dia

Providing and fixing PVC fitting 150mm dia ( one hundred fifty millimetre ) single equal branch plain ISI marked including fixing with approved adhesive etc. complete including entire carriage of material with in all leads and lifts and other incidentals.The rates are inclusive sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing 3 HP Pump(Tullu pump) Serex, Kirloskar, Worthington, Crompton with all other required accessories for supply of water upto tank over slab including entire carriage of material with in all leads and lifts and other incidentals.The rates are inclusive sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

, D.S.Rathore

unipro