Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical ADMITEED |
| 2 | Accepted-Technical | Accepted-Technical ADMITEED |
| 3 | Accepted-Technical STAKMO | Accepted-Technical ADMITEED |
Tender Value
Refer Docs
EMD Value
₹8,800
Closing Date
9 Sept 2026, 2:00 pmClosed
Executive Engineer PWD RnB Division Leh
Executive Engineer PWD RnB Division Leh
Repair and Renovation of wash room, kitchen and installation of electric wires and sockets etc. Divisional Soil Conservation Office Leh (Balance work
2026_PWD_19478_3
E Tender 65 of R and B Division Leh
Open Tender
Civil Works - Others
Percentage
20 days
Leh
Please refer Tender documents.
3 documents required · 3 mandatory
₹200
Executive Engineer PWD RnB Division Leh
₹8,800
15 Sept 2026
3 Sept 2026
10 Sept 2026
3 Sept 2026
9 Sept 2026
3 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing fixing 12mm thick pre laminated flooring of approved brand as per direction of engineer in charge, complete jon AC-4 Including carriage. | 29.73 | sqm | 1,434.33 | ₹42,642.63 |
| 2 | Providing and fixing in wall lining flat pressed three layer (medium density)
particle board or graded wood Pre-laminated one side decorative lamination and
other side balancing lamination Grade I, Type II, IS : 12823 marked, including
priming coat on unexposed arrangement and screws etc. complete : | 28.98 | sqm | 1,310.66 | ₹37,982.93 |
| 3 | Providing and fixing stainless steel fancy handle of approved make fixed with SS
screws etc. complete as per direction of Engineer-in-charge.
200 mm | 18 | each | 142.54 | ₹2,565.72 |
| 4 | Providing and fixing Hydraulic hinge of approved quality for thick door with stainless steel screws complete ( Full Kabza ) | 12 | each | 338.98 | ₹4,067.76 |
| 5 | Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS : 1285,
fixed with rawl plugs and screws or with fixing clips, or with expansion hold
fasteners including necessary filling up of gaps at junctions, at top, bottom and
sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth,
rust free, straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless
steel screws, all complete as per architectural drawings and the directions of
Engineer-in-charge. (Glazing and panelling to be paid for separately):
For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according
to IS: 1868, Minimum anodic coating of grade AC 15) | 274.93 | kgs | 547.35 | ₹1,50,482.94 |
| 6 | Providing and fixing 12mm thick prelaminated particle board flat pressed three
layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II in
panelling fixed in aluminium doors, windows shutters and partition frames with
C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Prelaminated particle board with decorative lamination on both sides. | 32.05 | sqm | 1,044.82 | ₹33,486.48 |
| 7 | Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of engineer-in-charge . (Cost of
aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 64.1 | sqm | 1,398.34 | ₹89,633.59 |
| 8 | Providing and fixing precoated galvanised iron profile sheets (size, shape and
pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total
coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester
top coat 15-18 microns. Sheet should have protective guard film of 25 microns
minimum to avoid scratches during transportation and should be supplied in
single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall
be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM
seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding
the cost of purlins, rafters and trusses and including cutting to size and shape
wherever required. | 21.32 | sqm | 703.86 | ₹15,006.3 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.23 MB
BOQ_46149.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .