SPL REPAIR TO BLDG NO MES 83 1 AND 69 3 AT SE FALLS SHILLONG AND PROVN OF HEAVYDUTY VITRIFIED TILES ON VERANDAH AND RCC JALI TO HQ CESZ AT SE FALLS AND ADDN ALTN TO TOILETS BATHROOMS OF CRs SINGLE LIVING ACCN OF HQ CESZ SE FALLS COMPLEX UNDER GE SHI

Amount

AGE B/R SCHEDULE PART - I Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings complete all as specified and as directed.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and as directed.

All as per items No 2 above but in in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section unframed work complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and as directed.

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame)complete all as specified and as directed.

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames)complete all as specified and as directed.

Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as directed

Taking down shutters of any description nexc.1.0 Sqm each complete all as directed

Demolition of Brickwork/solid concrete block work built in Cement mortar complete complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipescomplete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and as directed.

M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified.

S&F 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

Dismantling mild steel work of any description complete all as specified and as directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and as directed.

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face as per specificationcomplete all as specified and as directed.

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and as directed.

M &L for 35mm thick of 2nd class hard wood glazed skeleton hardwood shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

M&L 30mm thick 2nd class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed.

M&L 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

S&F steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 16 mm thick block boards fixed with screws to timber frame complete all as specified and as directed

S&F 12 mm thick block boards fixed with screws to timber frame complete all as specified and as directed

M&L 18 mm thick prelaminated particle board,exterior grade prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screw etc complete all as specified and directed.

S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified

S&F 20mm thick 2nd class hard wood boarding in eaves board/fascia plained one side with butt joints fixed with nails complete all as specified.

S&F brass 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F brass 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F extruded fancy type Brass handles fabricated type of size 150 mm complete all as specified and as directed.

S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specified and as directed.

S&F butt hinges 100 mm extruded brass with mild steel hinge pin bright polsihed and fixed type B-11 complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F Mild steel sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 300mm complete all as specified and directed.

S&F 4 levers Brass Mortice lock,vertical type,100mm length complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and as directed.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specified and as directed.

S&F butt hinges 100 mm medium weight mild steel cold rolled and fixed complete all as specified and as directed.

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed

S&F for stainless steel designer carrousel unit with 2 tier 650 mm diax650 including fixed along with telescopic channel /undermount runner and clips to Wooden/PVC cabinet complete all as specified and directed by Engr-in-charge

S&F for stainless steel soft close Gas spring stay Pneumatic/Hydraulic capacity 5 kg (Straight flap soft close Gas lift) (BCF -G50-SC) fixed along with self closing hinges and screws complete all as specified and directed by Engr-in-charge

S&F for Nickel finish type Soft close clip on cabinet hinge full overlay suitable to any thickness of board all as specified and directed by Engr-in-charge

S&F plain stainless steel basket of size 430x505x200mm fixed along with telescopic channel /undermount runner and clips to Wooden/PVC cabinet complete all as specified and directed by Engr-in-charge

S&F plain stainless steel basket of size 530x505x200mm fixed along with telescopic channel /undermount runner and clips to Wooden/PVC cabinet complete all as specified and directed by Engr-in-charge

S&F plain stainless steel cup & saucer basket of siz 480x505x100 mm fixed along with telescopic channel /undermount runner and clips to Wooden/PVC cabinet complete all as specified and directed by Engr-in-charge

S&F plain stainless steel perforated cutlery basket of size 480x505x100mm fixed along with telescopic channel /undermount runner and clips to Wooden/PVC cabinet complete all as specified and directed by Engr-in-charge

S&F plain stainless steel perforated thali basket of size 480x505x200mm fixed along with telescopic channel /undermount runner and clips to Wooden/PVC cabinetcomplete all as specified and directed by Engr-in-charge

S&F plain stainless steel three shelf pull out of size 180x410x510 mm fixed along with telescopic channel /undermount runner and clips to Wooden/PVC cabinet complete all as specified and directed by Engr-in-charge

S&F plain stainless steel grain trolley of size 510x505x230mm fixed along with telescopic channel /undermount runner and clips to Wooden/PVC cabinet complete all as specified and directed by Engr-in-charge

S&F ball bearing drawer channel of size 500/600 mm long complete all as specified and as directed by Engr-in-charge

S&F stainless steel single cutlery insert 430x505x100mm fixed along with telescopic channel /undermount runner and clips to Wooden/PVC cabinetcomplete all as specified and as directed by Engr-in-charge

S&F in repair for kitchen plate rack made of stainless steel sheet not less than 0.63mm thick of over all size 600mm x 750mm x 250mm fixed to wall with brass screws complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410mmx330mmx160 mm complete

S&F in repair Bip tap, chromium plated, 15mm fancy type complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 sqm in each pan complete all as specified and directed.

M&L for precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M&L for Precast cement concrete block masonry with solid block 10 Cm thick, type C1 (1:3:6) (using 20mm graded stone aggregate) with plain or interlocking joints and setting in CM 1:4 complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and as directed

M&L for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed

All as per Item No. 2 above but as in vertical surfaces such as wall, skirting and dado etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tiles over and including 10 mm thick backing course in cement sand mortar (1:4) complete all as specified and directed.

M&L for non skid ceramic Coloured tiles 7 to 8mm thk area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:4complete all as specified and as directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Supply only Integral waterproofing compound

M&L for rendering 10mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

S & F in repairs Vitreous China EWC one piece with integrated cistern including seat cover closed and twin flush fitting complete all as specified and approved by Engr-In-Charge complete all as specified and as directed.

S & F in repairs Towel rack 600mm long with lower hangers , stainless steel complete all as specified and approved by Engr-In-Charge complete all as specified and as directed.

S&F in repairs vitreous China table top WHB of size 635x430x190 mm incl waste coupling complete all as specified and approved by Engr-In-Charge

S&F in repairs Brass CP 2-in-1 Bib cock with flange complete all as specified and approved by Engr-In-Charge complete all as specified and as directed.

S&F in repair 15mm bore brass CP sink wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and approved by Engr-In-Charge.

S&F in repairs CP Soap dish holder complete all as specified and approved by Engr-In-Charge.

S&Fin repairs 600mm Towel rail stainless steel complete all as specified and approved by Engr-In-Charge.

S&F in repairs corner glass shelf with bracket complete all as specified and approved by Engr-In-Charge.

S&F in repairs Brass CP angular stop cock fancy type with Capstan heads complete all as specified and approved by Engr-In-Charge.

S&F in repairs CP over head shower dia 125 mm round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system with CP shower arm dia 20 mm & 450 mm long round shape without bend for wall mounted showers with flange complete all as specified and approved by Engr-In-Charge.

S&F in repair 15mm bore brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl fixing 20mm dia PTMT ball Valve and taking down old unservicable tank of any capacity all as specified and directed

S&F in repairs CP wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange complete all as specified and approved by Engr-In-Charge.

S&F in repair Health faucet mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and approved by Engr-In-Charge.

S&F 300mm long MS Helical door spring Welded to steel /Fixed to wooden door frame including roller and roller plate etc of approved quality complete all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth and getting out in soft/ loose soil for foundation etc. complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm in soft/loose soil complete all as specified and directed.

Removing excavated soils to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes 160 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F High density polyethylene pipes (HDPE 'B' grade) 160mm dia of pressure rating 6 kgf/cm2 laid in trenches etc complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2, Concrete bed to 160 mm drain pipes including packing under and completely surrounding pipes with concrete after they are laid and testedcomplete all as specified and approved by Engr-In-Charge.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-l smooth finished, and reforming benching as required for 160 mm internal dia of pipe complete all as specified and as directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs, shelves and similar articles set in CM (1:6) including necessary form work complete all as specified and directed.

M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in floors/wall complete all as specified and directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in floors/wall complete all as specified and directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC(SWR) 75mm dia vent cowls complete all as specified and directed.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item above 113, but for 20mm dia (Bore).

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth.

M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over a coat of alkali resistant primer over 1mm of wall care putty complete all as specified and directed.

M&L for preparation of new wall surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfacescomplete all as specified and directed.

M&L for complete removal of existing wall treatment surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat over a coat of 1 mm wall acre putty complete all as specified and directed.

M&L for complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over a coat of primer over 1mm thik wall care putty complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of arcylic distemper on ceiling complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repairs peg set of six, chromium plated, back plate including chromium plated fixing screw complete all as specified and directed.

S&F in repair 25 mm dia aluminium drapery rod with wooden finish, decorative, including brackets, decorative finials at both ends (minimum) in one opening complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level) all as directed.

M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in path, Hardstanding, plinth protection, sub-floors etc finished even and fair or even and rough as reqd complete all as specified and directed

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drains complete all as specified.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets.

S&F Anodised Aluminium frame work for snap grid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve ceiling board complete all as specified and as directed .

M&L for 4mm thick non asbestos fiber cement building boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square exc 0.5 sqm in each pan complete all as specified and directed.

Repair to damagedroof after complete removal existing treatment including padding, cleaning, the surface using wire brush brooming down and appplying the following treatment all as directed in order of precedence as stated:- (i) Rendering 15mm thick in Cm (1:4) on existing roof surface true to level after applying cement slurry @ 3Kg/Sqm. (ii) Applying one coat of bituminious primer . (Note :- Bituminous primer shall be 'TANK MASTIC' manufactured by M/s STP Ltd or "EMUFALTE" manufactured by M/s Texsa India Ltd) (iii) supply and laying 3mm thick APP based polymeric membrance of approved manufactured with weight not less than 3.00 Kgs Sqm reinforced with non-woven polyester febric weight not less than 150gms peer Sqm. Polymeric membrance shall be taken to a height of 3cm (minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrance flashing. Note :- (i) Laying APP based polymeric membrance shall be done torch on method as per manufacturers instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrance respectively and sealed all overlaps and joints as per manufacturers instructions. (iii) APP based polymeric membrance shall be "SUPER THERMOLAY" manufactured by M/s STP Ltd of "MOPLY FP 3mm" manufactured by M/s Texas India Ltd & equivalent of Shivam Tar product.

M&L 20 -25 mm thick machine cut kota stone slab for trade riser of steps, skirting, dado and pillar laid over 10 mm thick cement mortar 1:3 screed and jointed withgrey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing complete.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed

S&F Providing precast cement concrete Type B-0 (1:2:4) using 12.5mm graded aggregate, luvres and jallies, 50 mm thick (measured solid), including all mould- ings but excluding frame (Precast frame shall be measured separately and paid for under item 09) set in cement morter 1:4 complete all as specified and directed.

M&L for Providing precast ce- ment concrete Type B1 1:2:4 (20mm graded aggregate )in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in CM 1:4 complete all with joints to match all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in parapets, coping, benching, appex stone etc water trough and the like including weathering slightly rounding or chamferred angle and throating etc including necessary formwork complete as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer all as specified and directed

Demolition of precast concrete block walling built in cement mortar complete all as specified and directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of Creosote complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M & L for RCC type B1 1:2:4 (20mm graded aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed by the Engineer-in-Charge.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) reducer 110mm dia complete all as specified and as directed.

S&F in repairs PVC (SWR) bend with access door of any radius 75mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) 110mm diaPVC (SWR) junction double, (double T), equal or unequalcomplete all as specified and as directed.

S&F in repair for grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S&F in repair brass body CP Tubular towel rail 20mm dia 450mm long complete all as specified and directed..

Refixing 15mm bore, old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 20mm bore, old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled stainless steel, size of hinges 100mm complete all as specified and directed..

S&F Extruded Aluminium, anodised, handles of size 100mm complete all as specified and directed.

S&F aluminium anodised barrel bolts and fixed of 100 mm length complete all as specified and directed.

S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC flushing cistern 10 liters low level, PVC pipe connection suitable to joint flushing cistern to water closet fixed on 'P' or 'S' trap, lime concrete bedding complete all as specified and directed by Engineer-in-Charge.Make: HINDWARE/ PARRYWARE/ CERA

S&F in repair Wash basin vitreous china oval type white colour of size 510x430mm fixing on granite slab including cutting for and pining in ends of brackets, or erecting stand with fixing of CP waste coupling 32mm bore and waste pipe 32 mm x 800mm long complete all as specified and directed. Note: Rate for granite slab measured seperately.

S&F in repairsVitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia complete all as specified and as directed .

S&F Urinal spreader of chroumium plated any colour for fixing with 15 mm dia pipe complete all as specified and directed..

S&F in repairs 15 mm bore pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Urinal partitions slabs 8/10mm toughened polish glass meets size 450x900mm terminating above floor line complete all as specified and directed.

S&F vitreous China wash down (EWC) water closet pan (pedestal pattern) with S or P trap, white including flushing 10 ltr capacity cistern and flush pipe and plastic water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, fixing bolt for pedestal pattern complete all as specfied and directed.

S&F in repairs Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F powder coated anodized aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.

S&F powder coated ,anodised aluminium window and ventilator shutters fixed type without sash bars, aluminium secton weighing 0.55 kg/m incl necessary joining cleats glazing clips, rubber packing , anodised aluminium snap beading , screws complete all as specified and directed.

M & L for PCC 1:4:8 Type D2 using 40mm graded aggregate as in foundations, filling, sub base of floor and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L for Machine pressed precast rubber moulded coloured conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation including spreading under interlocking paver as specifeid and directed

AGE E/M SCHEDUEL PART - II Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material & Labour for concealed Point wiring with two single core 1.5 sqmm (nominal area), FRLSH, ISI marked PVC Insulated unsheathed multistranded copper cable, 1100 volts grade including PVC Conduit of suitable size with all fittings and accessories including PVC rectangular board of suitable size, and FRLSH, ISI marked PVC insulated unsheathed single core multistranded copper cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/fan point controlled by one way switch including cutting chases not exc 10cm girth and making good disturbed surfaces complete all as specified and directed.

All as per Item No.176 above but for one 2/3 pin socket outlet, 5 Amps on independent board, complete all as specified and directed.

All as per Item No. 176 above but for one 2/3 pin socket outlet, 5 Amps on same board, complete all as specified and directed.

All as per Item No. 176 above but for one call bell point controlled by one push button switch, complete all as specified and directed.

All as per Item No. 176 above but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 4.0 sqmm for one power point ,3 pin 15 Amps on independent board including FRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 4.00 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

S&F Modular Bell push 6A, 1 module complete all asspecified and as directed.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

S&F Modular switch, one way, 6 Amps, one module complete all as specified and as directed.

S&F Modular switch, one way, 16 Amps, one module complete all as specified and as directed.

S&F Modular socket outlet, 6/ 16 Amps, 2/3 pin, two modules combined with modular plate complete all asspecified and as directed.

S&F Modular socket outlet, 6 Amps, 2/3 pin, two modules combined with modular plate complete all asspecified and as directed.

Supply and fixing white cover plate with frame 3 module complete all as specified and directed.

Supply and fixing white cover plate with frame 6 module complete all as specified and directed.

Supply and fixing modular flush box/surface box 3 module complete all as specified and directed.

Supply and fixing modular flush box/surface box 6 module complete all as specified and directed.

Supply and fixing LED batten fitting 20 Watt fixed to wall with 2 nos PVC block of suitable size complete all as specified and directed including taking down old unserviceable light fittings.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed including taking down old unserviceable light fittings.

S & F recesss mounted low glare LED luminaire 35/36 Watt 2 x 2 3000 K complete with all accessories including taking down old unserviceable one complete all as specified and directed.

S & F in repairs Wall bracket decorative LED Light fitting with lamp 9 Watt complete with necessary connection including taking down old unserviceable one Make:Havellls Cat No LHOAJE2TZ1I060 or equivalent in Philips/Bajaj complete all as specified and directed.

S & F round shape 12 watt 220 volts AC recessed type high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size complete including taking down old unserviceable one Make Crompton/Havell's/Bajaj/Phillips.

S&F Bulkhead luminaries with all accessories 1X9W/10W LED including LED light driver holder connecting up with three core flexible copper conductor of suitable size including taking down old unserviceable one.

M&L ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.

Supply and fix MCB Distribution board , 240 volts Single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed including taking down old unserviceable one.

Supply and fixing RCBOs double pole 32 Amps, 30 mA 240 Volts including taking down old one all as directed.

Supply and fix MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed iIncluding taking down old one.

Material and labour for concealed sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC conduit of suitable size including cutting chases not exc 10cm girth and making good disturbed surfaces complete all as specified and directed, including taking down unservicable one.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC conduit shall be measured as one length).

Material and labour for concealed sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC conduit of suitable size including cutting chases not exc 10cm girth and making good disturbed surfaces complete all as specified and directed, including taking down unservicable one.(Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC conduit shall be measured as one length).

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Supply and fixing in repair to three phase temper proof digital electronic meters with polycarbonate cover 230 Volts LCD Display 10-60 Amps, accuracy class-I 50 Hz conforming to IS 13779, IP-54 with parameters to show data, time, current reading, load,PF, voltage and KWH Make :- L&T/ Legrand/Schneider including taking down old unserviceable meters to MES store and including connection and complete all as specified and directed as specified.

Supply and fixing single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one double pole 20 Amps MCCB Complete all as specified and directed

Supply and fixing PVC Exhaust fan 250 mm 230 Volts Ac single phase Complete all as specified and directed including taking down old unserviceable one.

Supply and fix water heater storage type,steel body with PVC copper inner tank and heating element upto 2 KW electric capacity 25 ltrs, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe including taking down old unserviceable one. .

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLSH IS 694 cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) drawn through casing caping with all fittings including plastic laminated sheet cover for mounting switch sockets and drawing continuous earth wire with PVC insulated unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) connected to earth dolly complete all as specified and as directed by Engr-in-Charge.

All as per Item No. 208 above but for one 2/3 pin socket outlet, 5 Amps on independent board, complete all as specified and directed. Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

All as per Item No. 208 above but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 4.0 sqmm for one power point ,3 pin 15 Amps on independent board including FRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 4.00 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

Supply and fix switch socket combination (ISI marked) 2 in1 pin and 5 Amps, flush type, 240 volts universal complete all as specified and as directed. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2 in1 pin and 5A/16A 3 pin1 flush type, 240 volts universal complete all as specified and as directed. Make- Havells/anchor/ Legrand.

Ms Amrik Singh Bahra