SPECIAL REPAIRS TO MAIN AUXILLARY MICRO WAVE TEST TOWERS IN TECHNICAL AREA UNDER GE I RND RCI HYDERABAD

Amount

Taking down point wiring of any description from surface/concealed conduit for light, fan, socket or power complete, including fixture and fittings such as switches, ceiling roses, regulators, sockets, etc., removing materials from site and making good disturbed surfaces of walls, floors, etc., to match with the existing complete all as directed.

M&L, Point wiring complete with FRLSH PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit, medium grade, of minimum 20mm dia (ISI marked) and conduit accessories concealed in walls/floors/ceilings/roofs etc., with and including modular metal flush boxes made out of 1.6mm mild steel sheet along with modular plate and frame for mounting of switches, socket outlets, regulators etc., complete including provision of FRLSH PVC insulated unsheathed 1.5Sqmm solid copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following:-

Note: Quoted rate shall deemed to include cost of making chases and making good to match with existing surfaces.

One light/fan/bell point controlled by one, one way switch, 5/6 Amps

One socket outlet, 3 pin, 5/6Amps, on independent board controlled by one way switch.

One socket outlet, 3 pin, 5/6Amps, controlled by one way switch on same board with other switches.

All as per item No. 2 above but with 2.5Sqmm FRLSH cable for 15Amps socket outlet on independent board with 2.5Sqmm FRLSH cable for the earth continuity conductor

All as per item No. 2 above but with 4Sqmm FRLS cable for 20Amps socket outlet on independent board with 4Sqmm FRLS cable for the earth continuity conductor

S&F, Modular Switch 1 way 6Amps, 1 Module, 240V, ISI Marked complete all as specified and directed

S&F, Modular Switch 1 way 16Amps, 1 Module, 240V, ISI Marked complete all as specified and directed.

S&F, Modular Socket, 6Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F, Modular Socket, 6/16Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F, Modular step type fan regulator, 120W, 2 module complete all as specified and directed.

S&F, Ceiling rose, surface type Bakelite, three terminal 65x50mm, ISI marked complete all as specified and directed.

S&F in repairs, CRCA sheet metal enclosure with metal clad plug and socket single phase with a two pin and earth plug & socket suitable for surface/flush mounting, 240V, 20Amp capacity controlled by and including one No 20Amp MCB, SP, 10KA with 'C' curve complete all as specified and directed.

S&F in repairs, flat panel 1x1, 15watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLUTOSURFACE1X1PLS15WLED 857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, surface/wall mounting LED tube light fitting 1 x 20Watt LED batten indoor luminaire fixed on and including round PVC/bakelite blocks(2Nos) complete set with all accessories and LED tube rod and connecting electrically with twin core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells CAT No. REGALBATTENT8UPTO1X22 WSSBSWH with PHOTONULTRAE2.01213T8SSTL20WLED 865SPC or equivalent in Philips / Wipro

S&F in repairs, recess mounting 42W LED luminaire suitable for Armstrong/Grid ceiling with high performance LEDs complete with all accessories including driver pre-wired complete all as specified. Make: Havells Cat No: VENUSNEOHE2X2R18-42WLED857 MODUGR<19 along with Driver LEDDRIVER36V1A42WS or Philips CAT No RC 380 B LED 43 S-6500 G5 L60 W60 PSU OD or Techno commercially equivalent in Wipro

S&F in repairs, LED Aviation obstruction light, yellow painted, die-cast aluminum housing with red polycarbonate dome for better illumination, IP 65, surge and short circuit protection, wide operating voltage and suitable accessories fixed at any height complete all as specified and directed. Make: BAJAJ CAT No BGAV 302 LED or equivalent in PHILLIPS/CG/HAVELLS/WIPRO as approved by GE

S&F in repairs, factory made sheet metal enclosure distribution board (MCB DB) SPN 8Way, with 100amps rated copper bus bar, neutral link and earth bar, metal door, powder coated, suitable for use on 240V, 50Hz supply, IP 43 IK 09 protection, MCBs used as out going, making good disturbed surfaces to match with existing complete all as specified and directed. Make: Legrand CAT No 5076 11 or equivalent in L&T/ Siemens/ Schneider/C&S as approved by GE

S&F in repairs, factory made sheet metal enclosure distribution board (MCB DB) SPN 4Way, with 100amps rated copper bus bar, neutral link and earth bar, metal door, powder coated, suitable for use on 240V, 50Hz supply, IP 43 IK 09 protection, MCBs used as out going, making good disturbed surfaces to match with existing complete all as specified and directed. Make: Legrand CAT No 5076 10 or equivalent in L&T/ Siemens/ Schneider/C&S as approved by GE

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 8Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 6Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed. Make for item No 16 to 17: Legrand/L&T/ Siemens/ Schneider/C&S as approved by GE

S&F in repairs, MCB, SPN, 40 to 63Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4086 18 to 4086 20 or equivalent in L&T/ Siemens/ Schneider/ABB as approved by GE

S&F in repairs, MCB, SP, 6 to 32Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4085 87 to 4085 95 or equivalent in Siemens / L&T / Schneider/ABB as approved by GE

S&F in repairs, 3pole 160Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 47 or equivalent in L&T/ Siemens/Schneider/Havells as approved by GE

S&F in repairs, 3pole 100Amp MCCB, 16KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No.4200 05 or equivalent in L&T/ Siemens/Schneider/Havells as approved by GE

M&L in repairs, Sub main wiring with 2runs of single core 2.5Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed, copper conductor cable, multistranded drawn through and including rigid PVC conduit, medium grade of minimum dia 25mm along with accessories concealed in walls etc, including provision of one run FRLSH PVC insulated 2.5sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

M&L in repairs, Sub main wiring with 2runs of single core 4Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed, copper conductor cable, multistranded drawn through and including rigid PVC conduit, medium grade of minimum dia 25mm along with accessories concealed in walls etc, including provision of one run FRLSH PVC insulated 4sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

M&L in repairs, Sub main wiring with 2runs of single core 6Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed, copper conductor cable, multistranded drawn through and including rigid PVC conduit, medium grade of minimum dia 25mm along with accessories concealed in walls etc, including provision of one run FRLSH PVC insulated 6sqmm copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note: Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length. 2. Quoted rate shall be deemed to include cost of making chases and making good disturbed surfaces to match with existing.

S&F GI Earth wire 4mm dia as in earth continuity conductor or main earthing lead fixed to wall on battens or buried on ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing complete all as specified and directed.

M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI strip 25 x 4mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed.

Notes: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 446 of SSR Part-II.

GI earth Strip beyond 7.5m will be measured and paid separately.

M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI wire 4mm dia as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed.

Note: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:2:4 type B-1 using 20mm graded stone aggregate, 50mm thick cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 15mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 446 of SSR Part-II.

GI earth wire beyond 7.5m will be measured and paid separately.

M&L in repairs, Earthing complete with copper earth plate electrode of size 600 x 600 x 3.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to copper strip 20 x 3mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed.

Notes: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 25mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 446 of SSR Part-II.

Copper earth strip beyond 7.5m will be measured and paid separately.

Refixing of XLPE Cable with suitable clamps, bolts nuts & washers and fixed to walls/ roof at any height complete all as directed

Replacement of copper tubing, suction and liquid line from indoor to outdoor unit, ‘U’ foam etc., Leak testing of complete gas circulating system with dry nitrogen, flushing out complete system, vaccumising, supplying and charging the R-22 refrigerant gas, cutting brazing, leak detection and rectification etc., for the split type Air Conditioner of 1.5/2 Ton capacity complete all as directed. Note: Nitrogen shall be arranged by the contractor

Supply, Install, testing and commissioning, factory made and tested, CPRI approved LT panel board indoor type, weather, dust and vermin proof, free standing floor mounting type mounted on floor, separate cable alley for all the feeders, suitable for 440Volts, 3 Phase 4wire 50Hz AC supply system, conforming to IS, IP-54 class protection and made of 2mm CRCA mild steel sheet & angle iron frame, compartmentalized with rubber gasket hinged doors, front & rear opening and locking arrangement (including provision of 65mm Godrej (freedom) lock with 2 keys) with necessary bus bar arrangement with electrolytic grade aluminium bus bar 800Amps rating for phase and neutral 4 strips with colour coded PVC sleeves, installed on epoxy insulators housed in separate bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for MCCBs, copper control wiring using suitable size of PVC insulated, multi stranded copper conductors with all connected accessories, duly powder coated on the outside and inside including air ventilation for heat dissipation, suitable size knock out holes for cable glands, cable gland and lugs for

incoming and outgoing cable etc., independent multilayer chambers to accommodate accessories including dismantling the unserviceable LT panel board from the existing position after disconnection of all electrical connections complete all as specified and directed with and including the following accessories :-

MCCB 4pole, 400Amps, with adjustable thermal and magnetic settings, 36KA rupturing capacity at 415volt, conform to IEC -60947-II/ IS-13947-II - 01 No (Incoming)

MCCB 4pole, 100Amps, with adjustable thermal and magnetic settings, 16KA rupturing capacity at 415volt, conform to IEC -60947-II/ IS-13947-II - 05 No (Outgoing)

MCCB 4pole, 63Amps, with adjustable thermal and magnetic settings, 16KA rupturing capacity at 415volt, conform to IEC -60947-II/ IS-13947-II - 06 No (Outgoing)

3 pole ML 2 contactor AC3 rating of 32Amps - 01 No

Electrically operated digital timer switch DIN type daily/weekly programmable every 1 minute, with backup of 6 years, 28 memory locations, current capacity 16A, weekly program, with 2 changeover (CO), total 28 programs - 01 No

Indicator lamp R,Y,B LED type with 3 Nos of 2A HRC fuses - 01 Set

Note: Necessary arrangement shall be made for connecting and proper alignment of the panel board with the existing panel boards.

S&F in repair, 90W high efficient LED Street light fixture, single piece aluminum pressure die cast housing (LM6 alloy), Luminaire system efficacy ≥135 lm/W, System lumens 12200lm, high purity polycarbonate/toughened glass diffuser, with silicon gaskets for IP66 (No glue) protection, IK07, surge protection not less than 10KV, IEC 60598 to be followed, driver efficiency >85%, power factor >0.95, THD ≤10%, driver make must be as luminares, LED used to be SMD LED, secondary optics is must for better light distribution, LED Type for better color matching and to avoid color shift with LED binning as per ANSI standard, LED Makes: Nichia/ Cree/ Osram/ Philips Lumiled, colour rendering index CRI >70, temperature range 0 to 45 degree centigrade, CCT 5700K, lifetime of LED 50000 hours @ L70 B50 (As per TM21), photo biological safety report as per IEC 62471, voltage range 100-300V AC and safety on low voltage/high voltage, BIS R No. is mandatory and name of the company or logo must be embossed for LED light fixtures/drivers, submission of LM79, LM80 certification & TTR before claiming payment, Fixture shall be fitted to bracket 20 to 50mm dia complete all as specified and directed. Make: Havells Model No ENDURAPEARLPLUSSL 90WLED757PASYTOPCASTCC or PHILIPS Model No BRP409 LED115 CW SLA FG PSU GR V2 or Techno commercially equivalent in Wipro.

S&F in repairs, bracket suitable for street light fitting made out of 40mm dia GI tube light grade 1.5m long bent to shape, fixed with necessary nuts bolts and a pair of clamps made of 32 x 6mm flat iron complete all as specified and directed.

Taking down and dismantling old unserviceable damaged, broken / rusted strips including connected items from buildings walls and roofs complete all as directed.

S&F, Earth continuity conductor with 20 x 3mm copper strip fixed to wall on batten or recess or chases with necessary porcelain insulators or buried in ground or drawn in conduit/pipe/wall or fixed to poles or any other indicated situation for loop earthing etc., complete all as specified and as directed.

Refixing of copper strip obtained from item No 34 with new saddles and fixing screws as roof / down conductors on insulators or fixed in GI pipe complete all as directed. Note for item No 35 & 36: 1. Quoted rate shall be deemed to include cost of cutting and jointing copper strips with minimum No of rivets/bolt & nuts. 2. Insulators and GI Pipe will be measured and paid separately.

S&F in repairs, porcelain/epoxy, white / brown / green spacer insulator with one GI stud bolt with nut and washer with necessary drilling for bolt hole for holding or fixing roof / down conductor of lightning complete all as specified and directed

S&F in repairs, 40mm dia GI pipe light grade fixed to walls or laid in trenches etc., for protection of earth strip including sealing ends with hessian cloth impregnated with bituminous compound in ground and with teak wood bushes for ends fixed on walls complete all as specified and directed.

S&F in repairs, air termination single pointed aluminium rod 12mm dia and 300mm long with fixing arrangement complete all as specified and as directed

S&F in repairs, test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screws complete all as specified and directed.

S&F in repairs, microprocessor based Addressable Type Fire Alarm control panel with LED display complying with BS EN 54, single loop main control panel of capacity 99 detector, 99 modules, upto 200 detectors & module, complete event storage with real time clock communication for network/repeater one programmable form C relay for fire extensive built in transient protection lamp test facility common fire, supervisory, fault LED indication and battery 12V/7AH including testing complete all as specified and as directed. Make: Apollo, Honeywell, EST, Notifier Make of Battery: EXIDE, AMARON, FURKKAVA

S&F in repairs, speech auto dialing system suitable for Addressable Type Fire Alarm System, consisting of 13key onboard key pad, 3 message, 1 to 40 telephone numbers storage capacity and connecting to Fire station, special and special help complete all as specified and directed. Make: Securico, Apollo, Agni, Honeywell. Note for item No 41 & 42: Demonstration and training shall be given by OEM after installation and necessary certificate to that effect shall be submitted before claiming payment.

S&F in repairs, addressable photo electric type multi sensor with smoke and heat detector certified to EN-45 with base for fitting of smoke detector and self built in intelligence as per IS:11360 complete all as specified and directed. Make: Apollo, Honeywell, Minimax

S&F in repairs, weather proof Manual Call Point resettable type suitable for analogue Addressable Type Fire Alarm system for surface mounting or semi flush mounting, making necessary connection, testing and making good disturbed surfaces complete all as directed. Make: Apollo, Morley, EST, Minimax

S&F in repairs, addressable type electric sounder suitable for Addressable Type Fire Alarm system complete all as specified and directed. Make: National / Honeywell , Dekars

S&F in repairs, Response Indicator with set of built in tools for indication of detectors, 6V, fixed on walls or within false ceiling with LED indicator complete all as specified and directed. Make: Dekars, Ravel, Apollo, Securico, Honeywell

S&F in repairs, 2core 1.5Sqmm PVC insulated, FR PVC round sheathed, flexible copper conductor cable, 1100Volts, ISI marked complete all as specified.

S&F in repairs, non metallic rigid PVC conduit, medium grade of 20mm dia (ISI marked) and conduit accessories on wall/ceiling surfaces using clips of suitable size complete all as specified and directed.

Demolition of PCC in ground floors and paving's not exceeding 15cm thickness (below or above ground level) complete including disposal of debris off the premises all as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as directed.

M&L, 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring including necessary formwork complete all as specified and directed.

M&L, 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring, finishing the surface even and smooth using extra cement including necessary formwork complete all as specified and directed.

M&L, light coloured vitrified tiles in floors of size 600 x 600 x 9 to 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and as directed complete all as specified and as directed. Note: Shade and design/pattern of tiles shall be as directed by GE.

M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 300 x 300mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 400 x 400mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed. Note for item No 54 & 55: Design of tiles shall be as approved by GE

M&L, coloured glazed ceramic tiles of size 300 x 450mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

M&L, 20-25mm thick machine cut kota stone slab in flooring laid over and including 20mm thick cement screed in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L, 75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection, laid in bays, bay area not exceeding 2sqm, each finishing the surface even and smooth including necessary formwork and filling the joints with mastic filling comprising 1 part of heated bitumen and 3 parts of sand (all by weight complete all as specified and directed.

S&F in repairs, vitreous china wash hand basin white 550x400mm of size including cutting for and pinning in ends of brackets or erecting stand including brackets, PVC waste pipe and coupling of suitable size complete all as directed

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete including fixing to floor with bolts, including provision of plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repairs, vitreous china squatting pan, ‘Orissa’ pattern of size 630 x 450mm, white, with integral foot rests, including connection to trap, and to flushing pipe, antisyphonage pipe, etc., complete including provision of cement concrete bedding in 1:5:10 and making good to floor complete all as specified and directed.

S&F in repairs, vitreous china Urinal, half stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and union for discharge pipe etc., waste coupling of PTMT (half or full threaded) for 32mm bore dia of discharge pipe (minimum weight shall be 45gms) complete all as specified and directed.

S&F in repairs, chromium plated Hand Shower (Health Faucet) with 8mm Dia 1.2meter long flexible tube and wall hook complete all as specified and directed. Make: Jaquar CAT No 573 or techno commercially equivalent in Hindware or Parryware

S&F in repairs, 10 litres, PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs, chromium plated towel rail 20mm dia, 'D' type, 600mm long, premium quality all as directed.

S&F in repairs chromium plated urinal spreader complete all as specified and as directed..

S&F in repairs, PTMT grating dome round of size 125mm (minimum weight 40grams) complete all as specified and directed.

S&F in repairs, 15mm bore steel water tubing, medium grade, ISI marked, galvanized, including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., laid in trenches or fixed to walls and ceilings or concealed in walls, ducts/ceilings or laid in floors complete all as specified and directed.

All as per item No 69 above but 20mm bore of pipe.

All as per item No 69 above but 25mm bore of pipe.

S&F in repairs, 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15mm bore Stop valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed.

S&F in repairs, 15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 20mm dia Gun metal, globe or gate valves with iron wheel head, ISI marked screwed both ends for iron/GI pipe and fixed complete all as specified and as directed.

All as per item No 75 above but 25mm globe or gate valve.

S&F in repairs, 500litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete all as specified and as directed.

All as per item No 77 above but 1000litres capacity.

S&F in repairs, 25mm bore premium PTMT Ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball and fly nut complete, screwed for iron/GI pipe or brass ferrule complete all as specified and directed. Make:Prayag CAT No153 or equivalent as approved by GE

S&F in repairs, 110mm dia PVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls with suitable clamps complete all as specified and as directed.

S&F in repairs, 160mm dia PVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls with sitable clamps complete all as specified and as directed.

S&F, 110mm bore PVC(SWR) bends any radius complete all as specified and as directed.

S&F, 160mm bore PVC(SWR) bends any radius complete all as specified and as directed.

Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed.

Dismantling timber scantlings 40Sqcm and over in section, in any position complete all as directed.

S&F, first class hardwood, wrought, for railings, newel posts with square, rounded, chamfered or stop, chamfered edges, mortices for strings and handrails, sectional area exceeding 100mm x 100mm and fixed complete all as specified and directed.

M&L, preparation of new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F, 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

S&F in repairs, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F in repairs, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.

S&F, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F in repairs, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 100mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in repairs, 4mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F in repairs, 3mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls from any height including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L, 15mm thick rendering in cement mortar 1:4, on other than fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, preparing newly plastered surfaces of walls and ceilings and applying two coats of distemper oil emulsion, white or tinted over coat of alkali resistant primer over a coat of 1mm thick wall care putty including rubbing/ grinding with sand paper and making smooth and even surface as per manufacturers instructions complete all as specified and as directed.

M&L, preparation of old plastered surfaces of walls including cornices, pilasters etc., and applying one coat of distemper oil emulsion complete all as specified and directed.

All as per item No 102 above but for ceiling surfaces.

M&L, preparing old plastered surfaces of walls, ceilings, cornices, soffits of slabs and chajjas fins and facias etc., filling cracks, holes and dents and applying one coat of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality all as per manufacturer's instruction complete all as specified and directed.

M&L, preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. Note for item No 105 to 106: Tint of paint shall be as decided by Accepting Officer

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., and brushing with neat cement slurry @ of 3.0Kg of cement per Sqm complete all as directed.

M&L, PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as in roof curbs, coping and platform to water tanks and the like including necessary formwork, weathering, slightly rounded or chamfered angles and throating and other similar works complete all as specified and directed.

S&F, 10mm thick Roof tiles of size 300 x 300mm on roof surfaces all as per manufacturer's instructions complete all as specified and directed. Make: Endura of Johnson or equivalent as approved by GE. Note: Design and pattern shall be as approved GE

M/s ANUSHA ENTERPRISES