PROVN OF URINAL, WC, WASHBASIN, ATTACH TOILETS AND SHEDS ALONGWITH CONNECTED ITEMS AT VARIOUS UNITS AT RANCHI MIL STN UNDER GE RANCHI.

Amount

Excavating in post holes and getting out in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface

M&L for PCC 1:3:6 type C2 as in foundation, filling and mass concrete.

S&F MS Tube section as in posts, purlins and rafter with welding/ including securing with special shaped nut, bolts and washers all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut exc 5 cm long but n exc 150 mm & dia of neck 11 to 15mm Complete

S&F plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 and complete all as directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws as specified.

M&L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm in or grith, not otherwise described, over a coat of red oxide primer including preparation of surface complete all as specified.

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete

M & L machine pressed precast concrete coloured Inter locking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 grade with grey cement and pigment, over sand cusion ,over compacted earthcomplete, make Nitco, Raj Udyog, Swastik paver blocks or any other make as approved by GE

M & L sand filling under paver including watering and consolidation.

M & L PCC 1:2:4 ty B-1 (20mm graded aggt) as in bed block coping benching

Surface exavation n.exc 30cm deep and averaging 15cm deep and getting out in sooft/lose soil all as specified and directed

Material & labour for hardcore of broken stone or boulders of gauge n.exc. 63mm, deposited,spread and leveled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed

M&L Cement concrete 1:2:4 type B0 using 12.5mm graded agg 25 mm thick for laying of floor etc complete all as specified and directed

Material & labour Non skid coloured Joint free tiles 7-8 mm thick ( square/ rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm,as in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

Material & labour for brick work with sub class ‘B’ bricks, straight or curved on plan, exc. 6 metre mean radius built in CM(1:4) as in half brick wall complete all as specified and directed.

Use & waste of form work to edges of concrete flats, n.exc. 20 cm wide, horizontal or sloping and similar works, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick (horizontal or slopping).

Material & labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in beams, lintel, lintel band etc complete all as specified and directed.

M&L RCC Type A-1 1:1/2:3 (20mm graded aggregate) nominal mix over slabs supported on walls, beams and columns in floor, roofs, landing, balconies canopies, deck slabs and in shelves and the like

Supply & fix mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fix mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending as in stirups complete all as specified and directed.

Supply & fix mild steel work as in hold fast etc and similar articles confirming Fe-290 Gde E-165 complete all as specified & directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m

Supply & fix solid PVC door frame of size50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tales complete all as specified & directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II).

Supply & fix factory made steel ventilators fixed type with glazing bars complete all as specified and directed .

Supply & fix 3mm thick sheet glass, frosted type ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane

Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0.

M&L PCC 1:3:6 type C1 using 20 mm grade stone aggregate as in hold fast etc

Supply & fix mild steel butt hinges 100mm size medium weight, cold rolled complete all as specified and directed.

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified and directed.

Supply & fix 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

Supply & fix 250 mm long Aluminium alloy, Sliding door bolts, with hasp, staple and fixing clips of sheet, cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specified & directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster of any description from brick or stone walls etc, including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified & directed.

M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for preparation of newly plastered surface and apply three coat of white wash on wall complete all as specified

M&L Preparing old decorated surfaces, plastered or unplastered and applying one coat of white wash on buildings complete.

Supply & fix vitreous china squatting pan of pattern orrisa size 580mm x 440mm, white with “P” or “S” trap, including integral foot rests any pattern including connections to trap and flush pipe etc including making good to floor to match the existing complete all as specified & directed.

Supplied and fixed vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, CP waste coupling, complete all as specified & directed.

Supply & fix in PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply, fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply, fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

S&F 15 mm dia Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed.

S&F 20 mm dia Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed.

Supply & fix bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fix stop cock fancy type chromium plated with long shank and cup concealed type for 15mm bore steel pipe complete all as specified and directed.

Supply and fixed angular stop valve (concealed type) , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

Supply & fix pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fixing chromium plated shower roses with swivel joints of 125mm size complete all as specified & directed.

S&F Soap dish, vitreous china white, approximate size 160x160x90mm.

S&F aluminium Hat pegs, solid body, 125mm to 175mm.

S&F grating doom 100mm dia of PTMT (Minimum weight 25gms).

Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fix in PVC connections of 450mm long of PRYAG Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply & fixing MS tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed.

Supply and fix sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromiun plated bracket guard and railing 60 cm long

Supply & fix rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings complete all as specified & directed.

Supply & fix PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

Supply & fix 110 mm bore PVC (SWR) pipe in any length fixed to walls with clamps and laid in floors etc. complete all as specified and directed.

Supply & fix PVC bends any radius suitable for 110 mm thick PVC pipes complete all as specified and directed.

Supply & fix 75 mm bore PVC (SWR) pipe in any length fixed to walls with clamps and laid in floors etc. complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement.

Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.

S&F 110 mm PVC(SWR) vent cowl

Material & labour for 100mm dia cast iron Nahani traps with grating including jointing with waste pipe fixed in cement concrete type B1 (1:2:4).

Material & labour for 75mm bore PVC floor traps plain with grating including jointing with solvent cement complete all as specified & directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

Material & labour for brick work with sub class ‘B’ old sized bricks, straight or curved on plan, exc. 6 metre mean radius built in CM(1:6) complete all as specified and directed.

M & L PCC 1:3:6 type C-2 as Concrete bed to drain pipes 150mm dia including packing under, and hunching against the sides of pipes after they are laid and tested; in

Supply & fix 150mm dia salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed in CM 1:1 including testing complete all as specified and directed.

Material & labour for pre-cast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slabs, set in CM 1:6 including necessary form work and finishing to exposed surfaces complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2(40mm graded aggregate) as in plinth protection, path etc finished the surface even & fair complete all as specified

P.C.C 1:3:6 Type C-1 as in bed blocks, benching, copings and like complete all as spfd and ditected

S&F MS framed work of any section FE 410-w (Gde- E-250) quality as directed by Engr-in-charge as in truss/ purlins etc incl cleats, brackets complete al as spfd and directed

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply & fix in vitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6

M&L 15mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and fair (Without using extra cement ) complete

M&L three coat of white wash on newly prepared surfaces on wall , etc complete.

S& F MS wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165

S&F framed work as in doors or gates of angle or other section with guesset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete.

S&F 1.0mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of Zinc coating 120gm/sqm welded or shouldered joint are provided complete all as directed by Engineer-in-Charge.

M&L machine cut kota stone slab flooring 18-20mm thick over & including 20mm screed base in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with conceled Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch withsunken box of suitable size incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed

All as per item No 94 above but for one 3/5 pin socket 5 Amp on same board, with 1.5Sqm wire with 1.5Sqm earth wire.

All as per item No 94 above but for 3 pin socket outlet 15 Amps independent with 4Sqm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqm complete all as specified and directed .

S&F socket 5 pins, 6 Amp, flush type piano (multi purpose) Make : Anchor/Havells/ABB(ISI Marked)

S&F Socket 15 Amps flush type 230 Volts, AC complete. Make : Anchor/Havells/ABB(ISI Marked)

S&F Switch 15 Amps flush type 230 Volts, AC complete. Make : Anchor/Havells/ABB(ISI Marked)

S&F switch piano flush type/Bell push, 5 Amps, single pole one way (Make : Anchor/Havells/ABB ( ISI marked)

S&F ceiling rose, surface backlite, 65x50mm, three terminals, Make : Anchor ISI marked.(Make : Anchor/Havells/ABB ( ISI marked)

Supply and fix angle lamp holder PVC/Polycarbonate base / back suitable for with LED bulb 10 W. (Make : Anchor/Havells/Indoasian ( ISI marked)

S&F LED Mirror Light 10 Watt with diffuser, Decorative type,complete all as specifed & directed by Engg-in - charge. Make :-Crompton /Phillips/ Havells

S&F 20W LED 6000K (4’) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as directed by Engineer-in-Charge. Make : Havells bajaj Crompton

M&L for submain wiring with 2X6.0 Sqmm+6.0Sqmm Earth wire single core PVC insulated FRSL sheathed copper cable connecting to common earth dolly in and including heavy duty in concealed conduit incliding making good to disturbed surface all accessories complete all as specified and directed. Make Havells/Finolex/Polycab

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 04 ways.Make:-Havells / Legrand / L&T .

S&F MCB SPN 32 to 63Amps 415V incl all termnials, fitting etc. Make:-Havells / Legrand / L&T .

S&F MCB SP 06 to 40 Amps 415V incl all termnials, fitting etc. Make:-Indoasian/Havells / Legrand / L&T .

S&F exaust fan metalic body 230mm sweep 240V single phase.

S&F in replacement of LED building security light 25 watt green line a road lighting luminaries with high power LED and unique peanut to ensure uniform light distribution along with brackets and clamp Make-Crompton/Bajaj/Havells./ Phillips

S & Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specifed & directed by Engg-in - charge.

Balaji Construction And Company