Providing EI and fans, LAN wiring and Television sets for proposed INOC at 6-B, BSNL Admin Bldg, Santacruz, Mumbai.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C

Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed steel conduit as required. a) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit / PVC trunking as required a) 6 x 1.5 sq mm

b) 9 x 1.5 sq mm

c) 3 x 4 sq mm

d) 6 x 4 sq mm

Supplying and drawing of UTP 4 Pair CAT 6 LAN Cable in the existing surface/recessed Steel/ PVC conduit as required a) 1 run of cable

b) 2 run of cable

c) 3 run of cable

Supplying and drawing of following Pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed Steel/ PVC conduit as required a) 4 Pair

Supplying and fixing of following sizes of steel conduit alongwith accessories in surface / recess including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required a) 20 mm

Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required. a) 1 or 2 Module (75mm x 75mm)

b) 3 Module (100mm x 75mm)

c) 12 Module (200mm x 150mm)

Supplying and fixing following modular Switch / socket in existing modular plate & switch box i/c connections but excluding modular plate etc. as required. a) 5/6 amps switch

b) 3 pin 5/6 amps socket outlet

c) 15/16 A switch

d) 6 pin 15/16 amps socket outlet

e) Telephone socket outlet

g) RJ - 45 Information Outlet

Supplying and laying of following size of GI raceway and raceway accessories made of pre-galvanised sheet of 1.6mm thick including fixing in flooring etc complete as required. a) GI Raceway - 150 x 38 mm (2 Compartment)

b) Coupler for 150 x 38 mm GI Raceway

Supplying of following height adjustable junction box with base and cover plate for direct access to cables at the intersection of raceways including fixing etc complete as required. a) Adjustable JB 150 x 150 x 50 mm with 50 -70mm adjustable height

Supplying of 8 Module pop up box including fixing flush mounting in furniture/work table etc complete as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box / pop up box including connections but excluding modular plate etc. as required. a) 6A Switch - SP - 1 Way - 1 Module

b) 6A Socket with Shutter - 3 Pin - 2 Module ISI

c) Information Socket - RJ45 - CAT6 - UTP - 1 Module

Supplying and fixing TPN sheet steel enclosure on surface/ recess etc as required.

SITC of recess mounting type 36W, LED Cool White luminaire of 595 mm x 595 mm size modular fitting in metal casing and suspension arrangement with suitable size MS chain links (from ceiling/ tray), wiring connections, including providing 20 mm dia. MS flexible pipe along with sockets at both ends complete as required.

Supplying and fixing 400 mm sweep, 60 watts rating, 1350 RPM wall mounting fan having sharp blade and smooth neck tilting provision, 3 Nos speed setting suitable for indoor use made of ABS material etc complete as reqd.

Supplying and fixing 400 mm sweep, 90 watts rating, 1400 RPM pedestal fan having aluminium blade and smooth neck tilting provision, 3 Nos speed setting suitable for indoor use etc complete as reqd.

Dismantling of old MS conduit pipes of power / light circuit, LAN wiring, Light Plug, Power Plug boxes, Switch Boards including disconnection of wires from working cubicle, cabins, distribution boards and diverting the same temporarily to designated place/ cubicle etc complete as required.

Supplying and fixing of 1.38 m (55") Neo QLED QN70F 4K Smart TV, Tizen TM OS, 3840 x 2160 pixels, NQ4 AI Gen2 processor, 4 HDMI, 2 USB, 1 Ethernet, Digital/Optical Audio Output ports, RF input port, Wifi, Bluetooth connectivity, etc as required.

Supplying and fixing following ways, surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (But without MCBs and incomer) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required. a) 8 way (4 + 24) Double Door

Supplying and fixing following rating and poles, 240/415 volts, 10kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required a) 5 A to 32 A Single pole

b) 5 A to 32 A Triple pole

c) 50 A to 63 A Four Pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc as required.

Supplying, laying and fixing of 4 core 10 sqmm PVC/ XLPE armoured cables with copper conductor 650/1100V grade etc complete as required

Supplying, laying and fixing of 4 core 16 sqmm PVC/ XLPE armoured cables with copper conductor 650/1100V grade etc complete as required

Supplying and laying of 2 x 1.5 sq mm fire alarm armoured cable, 600/1000 V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying and fixing metal box of 75mm x 75mm x 60mm deep size (nominal size) on surface including painting etc as required.

Supplying and fixing 25mm dia MS flexible pipe with PVc coating along with all ancillaries and accessories like coupler etc as required

Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated / XLPE copper conductor cable of 1.1KV grade as required a) 4 x 10 sq mm

b) 4 x 16 sq mm

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Providing and installing 24 port unmanaged Gigabit switch - 2 Layer supported including testing and commissioning etc as required

Supplying and installing of 4U wall mounting rack for housing 24 port LAN switch with suitable hardware etc complete as required

Supplying and laying of blue LED strip/string along with driver and adaptor in POP false ceiling including connections testing and commissioning etc complete as required