Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC 1001 1 AB CIVIL LINES JHANSI 284 001 UP | JHANSI | UTTAR PRADESH | 284001 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹32.9 L+₹1.0 L (3.19%)Rejected-Finance NEAR RANGE OFFICE CHOUBYANA TALBEHAT DISTT LALITPUR UP | TALBEHAT | LALITPUR | UP | L2 | Rejected-Finance Not become lowest bidder | |
| 3 | L3₹33.4 L+₹1.6 L (4.88%)Rejected-Finance | L3 | Rejected-Finance Not become lowest bidder | |
| 4 | L4₹34.2 L+₹2.3 L (7.25%)Rejected-Finance VIJAY NAGAR KUMHARTOLI HANSARI INFRONT OF JIGYASA INTER COLLEGE JHANSI | JHANSI | UTTAR PRADESH | 284001 | L4 | Rejected-Finance Not become lowest bidder | |
| 5 | L5₹34.2 L+₹2.3 L (7.27%)Rejected-Finance WARD NO 4 NEAR MASZID BHATTAGAON DISTT JHANSI 284001 UTTAR PRADESH | JHANSI | UTTAR PRADESH | 284001 | L5 | Rejected-Finance Not become lowest bidder |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
21 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Deepak Kumar
Garrison Engineer Jhansi
SPECIAL REPAIR TO BLDG NO P-128 IN STOCKING WING OF 31 ARMD DIV ORD UNIT UNDER GE JHANSI
2022_MES_549872_1
GE/JHA/TOK/37 OF 2022-2023
Open Tender
Civil Works
Item Rate
180 days
GE Jhansi
Please refer tender documents
7 documents required · 7 mandatory
₹500
Yes
GE Jhansi
₹82,000
Yes
21 Nov 2022
3 Sept 2022
23 Sept 2022
3 Sept 2022
21 Sept 2022
14 Sept 2022
Amount
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as spd
Taking down Chowkats or frames Not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as spd
Taking down shutters of any description exc 1.0 Sqm but not exceeding 2.00 Sqm each complete all as spd
S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.size of the shutter as spd in SSR Part I section B Clause 8.24 (a) complete all as spd
S&F 35 mm thick factory made modular designer flush shutters solid core construction with block board core and pre-laminated type on both side complete all as specified and directed.
S&F of MS door frame made out of angle iron duly fixed in wall with MS hold fastner, with and incl all machine works i. e. cutting, welding, drilling, grinding etc complete for fixing of steel sheeting or other covering door etc confirming to Fe-410W(Grade-E250) Quality B and applying two coats of synthetic enamel paint over one coat of red oxide paint, complete all as specified and directed. Note : Sfeeting or the covering to dooor will be incl in item No 07.00 and shall be measured separately.
M & L for 1.60mm Plain, black, mild steel sheeting, in cladding of steel gate and straight flashings (length and girth as fixed) fixed to frame work with butt welding Complete all as spd
S&F Box type steel windows with 80x40x1.25mm MS Rectangular hollow section frame with side hung shutters (double shutters for glass and gauze) with out sash bars jointed together with and including grills using 12mm square bars @ 10cm C/C Ref TD No CEBZ/TD/14/ 2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed by the Engineer-in-Charge
All as per item No 8 above but without glazing bars
S&F Box type steel Ventilator with 80x40x1.25mm RHS frame with side hung shutters (single shutters for glass/ gauze) with out sash bars jointed together with and including grills using 12mm square bars @ 10cm C/C Ref TD No CEBZ/TD/14/ 2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed by the Engineer-in-Charge
S&F Solid PVC door frame of size 50mmx47 mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified in SSR Part-II 2020 section 8.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.
S&F 3mm thick sheet glass frusted/figured and pin headed glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed
S & F 150 mm long aluminum handles cast type
S & F 200 mm long aluminum barrel tower bolts of extructed section section.
S & F 250 mm long Aluminium sliding door bolts,plate type, stove enamelled black,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.
S&F Floor door stopper 75 mm long of aluminium alloy body and rubber tongue fixed to door complete all as spd
S&F in repair aluminium Hat and coat hooks, solid body, 175mm to 250 mm, (3 Nos each fixed on wooden frame) fixed to walls with necessary screw complete all as spd
S&F in repair for Mild Steel painted 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spd
S&F in repair for anodised aluminium alloy Harrison rails as in curtain rod with fixing brackets, stops, rollers etc all as spd and directed by Engr in charge
Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as spd
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd
Demolition of Brickwork masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars and precast concrete articles complete all as spd
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as spd.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid dry and pointed in any mortar complete all as spd
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/Dense soil complete all as spd
M&L for 75 mm thick cement concrete type D2 1:4:8 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all as spd
M&L for Hardcore (broken stone )of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface complete all as spd
M/L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded aggregate) as in levelling course complete all as specified and directed
M/L for 50mm thick PCC 1:2:4 type B0 (using 12.5mm graded aggregate) as in Flooring laid in alternate panels not more than 2 mtr in length including 4mm thick glass pan dividing strip complete all as specified and directed. {Note:-Rate is deemed to be inclusive of materials against providing 4mm thick glass pan dividing strip }
Dismantling Asbestos Cement Corrugated or Semi-corrugated sheet as in Roof covering /Ridge etc complete all as spd
Dismantling timber scantling frame work 40 sq. cm and over in section, in any position as in post or Truss etc complete all as spd
Ditto all as per item No 35.00 but as in frame work of fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as spd
Dismantling ceiling boards (fibre, pulp, insulation, etc)or insulation boards/ slabs/ blankets, any thickness, including cover fillers complete all as spd.
S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed. Make : Gyproc / V-Board / Everest
S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (AZ 150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. (MAKE - DYNAROOF/JINDAL/TATA or EQUIVALENT)
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ 150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F for Framed work such as grills, gratings, bracket for chajja/ cooler etc.. with ends of bars shouldered, framed guard bars, framework of water tanks, wind ties and similar work conforming to Fe.290.Gde-E-165
S & F for Roof trusses (framed), trussed, purlins and heavy bracket framing etc (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-410- W(Gde- E-250) quality- B complete all as spd
Plain Cement Concrete Type B1 ,1:2:4 (using 20 mm graded stone aggregate) as in lintels up to 1.5 M span (cast in situ), cills and other similar bands, plinth courses, parapets, copings, bed plates,hold fast and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as spd
S & F Mild steel Angles, bars, flats etc., as in supports for hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 290. GdeE-165
M&L for Non-skid cermaic coloured tiles (mat flooring) Size 300X300X7 to 8mm thick, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete.all as sppecified and directed.
M&L for Coloured Glazed ceramic tiles 300x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick redering in CM 1:4 on wall complete all as specified and directed..
M&L flor Jointless Non-skid cermaic tiles 7 to 8mm thick (squre/rectanglar) are of ech tiles 600MMX600MM, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.complete all as specified and directed
Ditto all as per item No 47.00 as above but in skirting including 10mm thick backing coat in CM 1:4 on wall complete all as specified and directed..
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick in two layers consist of 10 mm thick on fair faces of brick work or concrete surfaces for rough finish in cement mortar 1:6 over 5mm thick on fair faces of plastered surfaces in cement mortar 1:4 with water proofing compound finished fair and even without using extra cement complete all as specified and as directed.Note: water proofing compound shall be measured seprately.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6(internal ) finished fair and even without using extra cement complete all as specified and as directed.
Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as directed. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika
M&L Preparation of new wall surfaces and applying 2 coats of cement based paint over a coat of alkali based primer.
M&L Preparing New Plastered Surfaces of Walls and applying Two Coats of oil emulsion distemper over a coat of primer including a layer of wall care putty to smooth the surface before finishes complete all as specified and as directed.
Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.
Ditto all as per item No 55 but old wood surface and applying one coats of Synthetic enamel paint
Preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide.
Ditto all as per item No 57 but old steel surface and applying one coats of Synthetic enamel paint
Complete removal of exisiting treatment, washing rubbing of old treetment and applying three coats of white wash on wall sufaces complete all as specified and as directed.
Cutting holes in stone walls built in cement mortar or cement lime morter for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 exc half brick but n exc one brick as required all as directed by Engr-in-charge.
S & F in replacement 15 mm bore Bib taps, fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.( Make :- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality).
S & F in replacement 15 mm bore Bib taps long body fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.( Make :- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality).
S & F in replacement 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule ( Make :- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality).
Supply and Fix in replacement 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, high level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long. ( Make:- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality).
S&F in replacement of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swirl type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Hindware/Cera/ Parryware
M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping, watering and applying two coat of Cement base paint over and including one coat of cement based primer, complete all as specified and directed by the Engineer in Charge.
M&L for complete removal of existing treatment by brushing washing rubbing down, scraping. watering and applying two coats of oil bound distemper over and including one layer of Birla/JK White wall care putty to get level and smooth surface complete
S&F in replacement of stainless steel sink with drain board, 1.00 mm thick for kitchen with plug, with and including 40mm dia CP waste coupling, waste pipe of 750mm long, washers, cantilever brackets, connecting union etc overall approx size 915 mm x 460 mm with approx bowl size of 410x 330 x 160 mm etc, complete all as specified and directed by the Engineer in Charge. Make : Nirali / Prayag / Blue Star
Taking down steel tubing with and including connections, of 15 mm dia bore, complete all as specified and directed by the Engineer in Charge.
M&L for medium grade galvanised steel water tubing with and including all fittings and fixtures, fixed to wall or laid in floors for 15 mm bore, concealed or exposed, complete all as specified and directed by the Engineer in Charge.
Ditti all as per item No 71 but fixing only
Taking down steel tubing with and including connections, of 20 mm dia bore, complete all as specified and directed by the Engineer in Charge.
M&L for medium grade galvanised steel water tubing with and including all fittings and fixtures, fixed to wall or laid in floors for 20 mm bore, concealed or exposed, complete all as specified and directed by the Engineer in Charge.
M&L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc complete all as specified and directed by the Engineer in Charge.
S&F in replacement of stainless steel grating of round shape of 150mm dia with hinge type openable jali with and including fixing in CM (1:4) to floor/nahani traps etc, complete all as specified and directed by Engineer in Charge.
Disconnecting water tank of 500 ltr capacity any description complete all as specified and directed by the Engineer in Charge.
S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed by the Engineer in Charge.
S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff / Pearl
S&F in replacement of 1st quality vitreous china wash hand basin, white flat/angle back, size 550x400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size, complete all as specified and directed by the Engineer in Charge.
S&F in replacement of 1st quality vitreous china EWC fixed on floor with stainless steel scrow incl EWC sheet cover complete all as specified and directed by the Engineer in Charge.
S&F in replacement of PVC connection 450mm long, 15mm dia PTMT (PVC), complete all as specified and directed by the Engineer in Charge.
S&F pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all specified and directed. Make: Hindware/ Cera/ Prayag / Pearl /Parryware.
S&F in replacement CP Brass Towel Rail 600mm Long fixed with and including chromium plated brass screws
M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection and path laid in alternate panels not more than 3 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) 1 part bitumen 85/25 and 3 parts of sand complete all as specified and directed. {Note:-Rate is deemed to be inclusive of materials against forming & filling of joints }
S&F in repair for Mild Steel painted 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spd
S/F 200mm mils steel barrel tower bolt stove enameled black.
S/F 150mm mild steel pressed handles over type stove enameled.
S/F mild steel sliding door bolts 300mm plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate two on staple plate.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for , foundationmanholes,etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as spd
Ditto all as per item No 90.00 but exc 1.5m to n exc 3m in depth for , foundationmanholes,etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as spd
Returning filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.
Removing excavated material to a distance exceeding 50 meter upto 250mtr and deposited where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed.
M & L for cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in foundation and mass concreting complete all as specified and directed.
M&L for PCC 1:3:6 type C2 as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for CI pipe 150mm bore.
M&L for precast manhole covers with plain faces using RCC 1:2:4 type B1 and set in CM 1:4 including formwork
M&L for 150mm dia CI pipe (sand cast) in any length with (or) without ear laid in trenches and jointed in CM 1:1
M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6
M&L for Green marble 18/20 mm thick in steps, pillars, wndow cills, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L Machine cut kota stone slab flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete
ditto As per item no 100 above but 16 - 18mm as in skirting, Dado etc.
M&L for 10mm thick plaster(backing coat) in CM (1:4) surface other than fair face of brick work including finishing the surface by rough finish complete all as specified and directed.
M&L for 15 mm thick Screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as spd
S&F powder coated/anodised aluminium frame for door, windows,ventulatorswith one or more rebates including joining cleat for fixing etc complete all as specified.
S&F powder coated/anodised aluminium door shutter weighing 0.55 kg/m including necessary jointing cleat,glazing clips, rubber neoprene packing , handle 2 Nos in each doors, hinges anodised aluminium snap beading with one or more rebates including screws etccomplete all as specified.
S&F powder coated/anodised aluminium window/ Ventulators shutter side hung or sliding without sash bar weighing 0.55 kg/m including necessary jointing cleat,glazing clips, rubber neoprene packing , aluminium 100mm hinges type B21(02 Nos) anodised aluminium snap beading ,aluminium fitting such as peg stay150mm long(1 No), suitable handle (02Nos)with one or more rebates including screws etccomplete all as specified.
S&F powder coated/anodised aluminium cuboard /cabinet/partition fixed type without sash bar weighing 0.55 kg/m including necessary jointing cleat,glazing clips, rubber neoprene packing and anodised aluminium snap beading including screws etc complete all as specified.
S&F aluminium Decco grill with 10mm dia and 50mm mesh size of design and pattern as approved by Engr in charge complete all as specified and directed.
S&F 12 mm thick prelaminated particle board, exterior grade prelaminated both side with decorative choice laminated & other side blanancing white lamination and complete all as specified and directed.
M & L for 6.3 mm thick sheet coloured glass, ordinary quality joining cleats, glazing clipsy in square exc. 0.50 sqm in each pane.
M & L for double action floor spring hydraulically regulated made up of aluminium 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete aii as spd and as directed
Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforced)complete all as specified and directed by Engineer in Charge.
M & L Reinforced cement concrete ,type A1,1:1.5:3(Nominal Mix) using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and similar work
S/F MS TMT bars 10 mm dia & over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.
Ditto-but 5 mm dia and over upto and including 10 mm dia in stirrups, spacer and binders.
M&L formwork to soffit of suspented slab such as roof slabs, floor slab and lintels,chullah hoods, chajjas, troughs, landing and similar items including edges. N.exc 200mm thick
M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in sub base complete
S&F for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls including all laps, cutting and waste complete all as spd
S & F Chequered cement concrete tiles 30cm x 30 cm x 22mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.
Taking down eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed.
S&F of Ring fit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and including rubber tighten gaskets, ring fit sockets etc, with and including all type of fitting i.e. tee, bend, junction etc, complete pipe duly laid in floor/trenches, complete all as specified and directed by the Engineer in Charge.
S&F of Ring fit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with and including all type of fitting i.e. tee, bend, junction etc, complete pipe duly laid in walls, complete all as specified and directed by the Engineer in Charge.
S&F of Ring fit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with and including all type of fitting i.e. tee, bend, junction etc, complete pipe duly fixed to floor/ Trenches with clamps, complete all as specified and directed by the Engineer in Charge.
S&F of ring fit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and including rubber tighten gaskets, ringfit sockets etc, with and including all type of fitting i.e. tee, bend, junction etc, complete pipe duly fixed to wall with clamps, complete all as specified and directed by the Engineer in Charge.
S&F 110 mm bore PVC (SWR) Tee equal size, complete all as specified and directed.
S&F 75mm mm bore PVC (SWR) Tee equal size, complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.
S&F of 110mm bore PVC (SWR) vent cowl, complete all as specified and directed
S&F of 75mm bore PVC (SWR) vent cowl, complete all as specified and directed
S&F of PVC nahani trap 75 mm dia including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed by the Engineer in Charge.
M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, including in CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.
M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:-
One light point controlled by one switch
One Exhaust fan point controlled by one switch.
One ceiling fan /Wall fan controlled by one switch and one regulator
One 6A socket point controlled by one switch on independent board
One 6A socket point controlled by one switch on same board
All as per srl item no. 136.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.
M&L for Circuit/submain wiring alongwith earth wire 2 runs x 4 sqmm + 1 run x 4 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed by Engineer-in-Charge. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length
Notes for item No. 136.00 to 138.00 (i) Quoted rate shall deemed to incude the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & caping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing caping may be used in that portion.
S&F, Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed.
S&F, Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed.
S&F, Socket, 6 pin, 6/16 Amp, multipurpose 240 volts, complete all as specified and directed.
S&F, Socket, two-in-one, 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed.
S&F, angle holder, metal cased, bakelite body, 240 volts, complete all as specified and directed.
Supply and fix electronic fan regulator in 5 steps, 240V, 50Hz complete all as specified and directed.
S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.
S & F 7W White LED retrofit lamp suitable for B-22 holder base with polycarbonate diffuser and aluminium heat sink.
Supply and fix LED batten box type with CRCA sheet steel body pre-wired suitable for and including provision of 1x20/22Watt (4 feet) retrofit LED tube with PC body and connecting up with twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.
Supply and fix recessed mounted LED panel light 2'x2' size, 36 watts, full white with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for Amstrong / grid false ceiling complete fixing accessories and all as specified and directed by Engineer-in-Charge. Make: Philips / Havells / Wipro / Bajaj / Osram
Supply and fix LED batten 9W/10W (2 Feet) complete with polycarbonate diffuser and built in with electronic driver including connecting up with twin core twisted flexible copper conductor cable form ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.Make:
Supply and fix LED building security light fitting 25 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP 65degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 25A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.
Supply and fix MCB distribution board, TPN, 4 way 415 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: MCBs shall be measured and paid separately.
Supply and fix MCB distribution board, SPN, 12 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separetely.
S& F MCB TPN 63 Amp, 10 KA, 'C' curve, 415 V, 50 Hz
S& F MCB SPN 40 Amp, 10 KA, 'C' curve, 230 V, 50 Hz
All as per srl item no. 155.00 here-in-before but SP 6 to 32 Amp, 230 V
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed, 16 sq. mm nominal cross section, 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down existing unserviceable service cable of any description complete all as specified and directed.
Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of GI Pipe and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.
Taking down ceiling fan of any size carefully, sealing cable end, dismantling blades and removing fan and blades to store for servicing including provision of downrod up to 2 mtr, supply, replacing bearings/bushings, capacitor and terminal connector including capacitor holder suitable for any model of existing fan, Painting of ceiling fans complete, with one coat of synthetic enamel paint by spraying including filling cavities with filler, after cleaning all dust etc and Hanging ceiling fan in its existing or new location and connecting up including provision of 3 core flexible copper conductor cable 0.5 sqmm from ceiling rose or connector to fan and testing for satisfactory functioning complete all as specified and directed by Engineer-in-Charge.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .