PROVN OF BOUNDARY WALL INTERLOCKING TILES ENTRANCE GATE AND CERTAIN MINOR WORKS AT VARIOUS LOCATION UNDER AGE BR II OF GE BEGNDUBI

Amount

SCHEDULE 'A'

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

Surface excavation n exc 30m deep and average 15cm deep in soft/loose soil complete all as specified and directed.

Excavation over area .exc 1.5 m deep & getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc.and not exc 10 sq m on plan depth and getting outgetting out in loose/soft soil complete all as specified and directed.

Add to items 03004 and 03005 for each additional 1.5 m or part thereof in depth beyond the first 1.5 m complete all as specified and directed.

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation concrete mass filling complete all as specified and directed.

M&L for 100 mm thick cement concrete type C2 1:3:6 (using 40mm graded aggregate) complete all as specified & directed.

M&L for plain cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate as in concrete bed including packing under & haunching against sides of bore pipes after the pipe are laid and tested for 150mm complete all as specified and directed.

Returning, filling in, including spreading, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacecomplete all as specified & as directed.

M&L for R.C.C design mix of M-25 grade ( using 20 mm graded aggregate ) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for R.C.C design mix of M-25 grade ( using 20 mm graded aggregate ) for columns, pillars, piers, posts etc. complete all as specified and directed.

M&L for R.C.C design mix of M-25 grade for Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.

M&L for R.C.C design mix of M-25 grade ( using 20 mm graded aggregate ) for slab supported on walls basment slab , roofs landing , balconies, deck slab etc complete all as specified and directed.

M&L for R.C.C design mix of M-25 grade ( using 20 mm graded aggregate ) for fins, facia, parapet and railing etc like etc complete all as specified and directed.

M&L for precast reinforced cement concrete type B1, 1:2:4 (using 20 mm graded aggregate) as in cover slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

M&L for use and waste of formwork in rough finised surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; in rough finish of concrete surface etc, complete all specified and directed.

M&L for use and waste of formwork in rough finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions in rough finished of concrete, surface etc circular on plan complete all as specified and directed.

M&L for use and waste of formwork in rough finished surface to sides of pillars, posts, struts, piers, columns and stanchions in rough finish of concrete surface etc complete all as specified and directed.

M&L for use and waste of formwork in rough finished surface to roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, in rough finish of concrete surface etc. complete all as specified and directed.

M&L for use and waste of formwork in rough finished surfaces to soffits of roof slab landing n.exc 200 mm thick in rough finished of concrete surface etc. complete all as specified and directed.

M&L for use and waste of formwork in rough finished surfaces to fins facia etc. rough finished of concrete surface etc. complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hoopoing for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

M&L for TMT bars 8 to 10 mm dia(in slabs fins facia) and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 with water proofing compound finishsed even and smooth without using extra cement complete all as specifed and directed. Note :WPC shall be measured and paid separatelyunder respective item of this schedule.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement morter 1:3 as in ceiling with water proofing compound finishsed even and smooth without using extra cement complete all as specifed and as directed. Note :WPC shall be measured and paid separately under respective item of this schedule.

Supply only water proofing compound (Liquid) complete all as spcified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surface of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for brickwork with fly ash bricks old size , straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built incement morter 1:4 complete all as specified and directed.

M&L brickwork with fly ash bricks (old size) in one brick thick honey-comb walling, built in cement morter 1:4 etc complete all as specified and directed.

S&F MS Steel angle as in post and struts in fencing cutting tops to shape as directed, drilling holes, notching wire etc: flat iron fillets for (securing wire mesh etc) including all necessary drilling, bolting or riveting etc and simillar work conforming to FE-290 Gde E-165 complete all as specified and as directed.

M&L for preparing new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zink primer complete all as specified and directed.

S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Providing and laying 60mm thick factorymade chamfered edge cement concrete paverblock of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for loose filling with broken brick aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

S&F 100m dia sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls, etc. complete all as specified and directed.

S&F cast iron cowl for 100m dia sand cast iron soil, waste and vent pipes complete all as specified and directed.

M&L for SGSW pipes 150 mm dia grade 'A' laid in trenches and jointed complete all as specified and directed.

M&L for cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar 1:1 etc. complet all as specified and as directed..

S&F in repairs salt glazed gully trap square or round mouthed 150X150mm, (type p or q or s )setting and jointing with solvent cement etc complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm stone agg) as in plinth protection, path, Sub bsae of floor etc.complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick,machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement & pigment complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement morter 1:6 complete all as specified and as directed.

M&L for cement concrete 1:2:4 type, B0 using 12.50 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

S&F Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

S&F hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for providing, cement concrete tye B-0 (1:2:4) (using 12.5 mm graded stone aggregate in roof kerbs, mud stops, rounded or chamfered on edges, parapets and railings upto 60 cm in height, copings,holdfast, kneelers etc complete all as specified and directed.

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc. complete all as specified and as directed.

M&L for granite (of any type) stone slab (table rubbed and polished), for wall lining( veneering to wall) 12 mm thick in cement mortar 1:3 jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc.complete all as specified and directed. Note:- The work of approx 9.00 to 10.00 lakh is covered for provn of entrance gate and allied wks at Bihar More TCP at Bengdubi Mil Stn. under the subject tender,for which the drawing for line plan and elevation shall be provided by the department, however the structural drawing shall be provided by the contractor duly vetted by Govt / Govt approved structural Engineer. The height of the gate shall be more than 6.5 meter.

M&L for MS framed work such as grills, gratings etc., with ends of bars shouldered and / or riveted, or forget into spikes: framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specifiied and directed.

T K GANGULY

M/S SANKAR BHATTACHARYA

PRADIP KUMAR BOSE

TECHNOSOFT

SRI A B SEN

M/S BISWAJIT BHATTACHARJEE

M/S B S CONSTRUCTION