PROVN OF EXTERIOR EMULSION COATING PAINT ON EXTERNAL SURFACES OF CERTAIN BUILDING IN RESIDENTIAL AND TECHNICAL AREA AT R AND DE ENGRS DIGHI PUNE

Amount

Taking down cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and all as directed by the Engineer-in-Charge.

M&L for applying 15mm thick Polymer modified mortor over concrete surfaces and making the surface even and smooth to receive further tretment all as directed by the Engineer-in-Charge.

M&L for rendering 15mm thick (First layer 10mm thick and second layer 5mm thick) in CM 1:4 including mixing with liquid water proofing compound all as per manufaturer's instructions over concerete/block/ brick masonary surfaces finished even & smooth without using extra cement at any height including necessary scaffolding work etc as required and all as directed by the Engineer-in-Charge. Note : WPC shall be measured and paid separately as 'supply only'.

M&L for rendering 10mm thick in CM 1:4 including mixing with liquid water proofing compound all as per manufacturer's instructions over 10mm thick dubbing coat on irregular faces of wall in CM 1:4 over stone masonary surfaces finished even & smooth without using extra cement at any height including necessary scaffolding work etc as required and all as directed by the Engineer-in-Charge. Note : WPC shall be measured and paid separately as 'supply only'.

Supply only Liquid water proofing compound of approved make all as directed by the Engineer-in-Charge.

Supplying and applying pre tested and approved non pigmented wet water based curing compound to concrete/ masonry surface all as per manufacturer's instructions and as directed by Engineer In Charge.

M&L for preparation of newly plastered surface of wall and applying two coats of exterior acrylic emulsion over a coat of exterior acrylic primer after preparation of surfaces at any height including necessary scafolding etc complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment by scrapping down with wire brushes, washing & drying up, filling with exterior grade wall putty where undulated on wall and applying two coats of exterior acrylic emulsion over a coat of exterior acrylic primer after preparation of surfaces at any height including necessary scafolding etc complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old steel surfaces and applying one coat of synthetic enamel paint over 10cm in width or girth, not otherwise described and all as directed by the Engineer-in-Charge.

Mukund Engineers and Contractors (BID ID -3043815)

Shri Sant Cosntruction (BID ID -3046444)

M/S K.D.MATE (BID ID -3047401)

S M MISHRA (BID ID -3046350)

vishalconstruction (BID ID -3046209)

UNICON (BID ID -3054901)