Loading
Loading…
Loading…
Tender Value
₹2.3 L
EMD Value
₹4,663
Closing Date
13 Jul 2026, 6:00 pm5d left
The Executive Engineer Civil Tender KTK Circle
Room No 324 3rd Floor CGMT Doorasamparka Bhavana No 1 Swamy Vivekananda Road Bengaluru 560008
RAISING GOUND LEVEL TO ROAD LEVEL TO PREVENT RAIN WATER ACCUMULATION GUNDLUPET MYSORE OA
2026_BSNL_282279_1
14/NIT/BSNL/CD/MYS/2026-27
Open Tender
Civil Works - Buildings
45 days
Gundlupet Mysore
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
The Accounts Officer Cash BSNL Mysore Telecom Dist
₹4,663
29 Jun 2026
29 Jun 2026
15 Jul 2026
30 Jun 2026
13 Jul 2026
30 Jun 2026
30 Jun 2026 - 10 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approvedmanufacturer in foundation and plinth in: | |||||
| 1.01 | a)Cement mortar 1:6 (1 cement : 6 coarse sand) | 11 | One cubic Metre | - | - |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 5 | One cubic Metre | - | - |
| 3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||||
| 3.01 | a)1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) | 5 | One Square Metre | - | - |
| 4 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | 6 | One cubic Metre | - | - |
| 5Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. | |||||
| 5.01 | a)Fixed to steel windows by welding | 50 | One Kilogram | - | - |
| 6 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 5.3 | One Square Metre | - | - |
| 7Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.48 MB
BOQ_329365.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid