Lapo Dumaria Rural Pipe Water Supply Scheme under Drinking Water and Sanitation Division Garhwa on turnkey basis for the year 2020-21

Amount

Elevated Service Reservoir

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and equipment for designing & construction of ESR/GSR all complete job. (Please refer to Section 5,Sl. 2.8 & 2.9 of SBD)

ESR 5.20 Lakh Litre capacity and 20 M Staging

Providing and supplying IS standard CI double flanged Pipes including all taxes (Central & Local), railway freight, insurance , unloading from railway wagon loading into truck transport to stores/site, unloading etc complete as directed by EIC

Inlet Pipe 150 mm dia.

Outlet Pipe 250 mm dia.

Scour/Washout Pipe 100 mm dia.

Overflow Pipe 100 mm dia.

Providing and supplying ISI standard CI flanged /S&S specials including all taxes (Central & Local) ,railway freight, insurance , unloading from railway wagon loading into truck transport to stores/site, unloading etc complete as directed by EIC

Providing doable flanged short body pattern type manually operated butterfly valve having body , disc and end cover in graded cast iron to IS 210 Gr. CF 200 generally confirming to IS 13095-1991, synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in Teflon bearing excluding CC foundation /structural steel support.

Butterfly Valve PN 1 (With bypass arrangement) 150 mm dia.

Providing Double Flanged Sluice valve confirming to IS 14846 including worn gear arrangements as per test pressure stainless steel, spindle, caps including all transportation etc. complete.(without bypass) with E.D.

Sluice Valve PN - 1.6, DI Sluice valve - 250 mm dia

Water Treatment Plant

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and necessary equipment for designing & construction of Unconventional WTP of 1.07 MLD capacity. With all complete job. (Please refer to Section 5,Sl. 2.3 of SBD)

Intake Well With Pump House

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand construction of R.C.C Intake well with Pump house all complete job. (Please refer to Section 5,Sl. 2.1 of SBD)

Construction of (Inner Dia. 5.00 M & Height 14 M)& Raw Water Pump House (Dia. 5.00 M & Height 6.00 M)

Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, Intake well etc. as per design section in all kinds of soils including moorum soil, soil mixed with canker, pebbles and boulders up to 300 mm size and disposal of the same (beyond 50 m away from the edge of the trenches) with initial lead of 150 m and initial lift of 1.5 m as per specification and direction of E/I.

Intake Well of inner Dia. 5m

Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, Intake well and outlet etc. as per designed section in ordinary rock or soft rock (where blasting is not needed) (vide classification of soil item - C) with disposal of soil (Beyond 50 m from the edge of the trenches) with initial lead of 150 m and lift of 1.5 m as per specification and direction of E/I.

Intake Well of inner Dia. 5m

Providing P.C.C. M-150 nominal mix of (1:2.:4) in foundation with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes &royalty all complete as per building specification & direction of E/I

Intake Well of inner Dia. 5m

Providing and casting in situ C.C. of trap / granite/ quartiz /gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by EIC including normal dewatering , plywood formwork , bully or steel props compaction finishing the formed surfaces with CM (1:3) of sufficient thickness for RCC M 300 vertical Walls.

Providing R.C.C. M ‐ 200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification & direction of the E/I

Pump Base Floor

Providing R.C.C M ‐ 200 in nominal mix of (1:1.5:3) in Beamsall types with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes &roy all complete as per building specification & direction of E/I

Top cross beam of Intake Well

Providing R.C.C M ‐ 200 in nominal mix of (1:1.5:3) in Beams all types with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes &royall complete as per building specification & direction of E/I

Top Ring Beam of Pump House

Beam of Operating Platform

Providing R.C.C. M ‐ 200 with nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification & direction of the E/I

Columns of Pump House

Providing R.C.C. M ‐ 200 with nominal mix of (1:1.5:3) in Operating floor and roof slab with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification & direction of the E/I.

Providing designation 75 A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening, materials, scaffolding, raking out joints to 15 mm depth curing, taxes & royalty all complete as per building specification & direction of E/I

Providing average 63 mm thick R.C.C. M-200 with nominal mix of (1:1.5:3) chajja in shelves with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, 6 mm cement plaster (1:4) in ceiling & sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification of E/I

Providing all materials, labors & doing 0.5" (12 mm) plaster with cement mortar (1:3) using clean coarse sand finishing inside outside full height and neat cement punning a dado up to operating platform high inside wall up to plinth level including screening, curing with all leads & lifts of water scaffolding, taxes and royalty all complete as per building specification & direction of E/I.

Providing 6 mm thick cement plaster (1:4) in ceiling with approved quality of coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification & direction of E/I. for under the operating platform & under Roof slab

Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all complete as per building specification & direction of E/I.

Providing two coats of dry distemper of approved shade and make over a primer coat of washing over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty over wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I

Supplying, fitting & fixing of Rolling Shutter of approved made of required size with M.S. laths interlock together through their entier length and jointed together at ends by end lock mounted on specially designed pipe shaft with brackts side guides and arrangement for inside outside locking with pull and push operating complete

80x1.25mm M.S. laths with 1.25 mm thick top cover

Providing and fixing of ball bearing for Rolling Shutter approved quality 3 nos.

Supplying, fitting & fixing M/S Grill made of 20*6 mm M.S Flat as pr approved design & drawing properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hosting as per the building specification and direction of E/I. (where materials is not supplied by the Dept.)

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, smokes, grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification & direction of E/I.

Providing 2 (two) coats of painting with ready mixed paints of approved shade & make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification & direction of E/I.

Providing and fitting & fixing of handrails as per approved quality wielding etc. to steel ladder rail, balcony railing, Staircase railing including applying primer coat of approved steel primer. i) M.S Tubes of dia 42.2 mm

Providing and fitting & fixing of glass panes with putty and glazed clips in steel doors windows all complete. i) 4mm thick glass pane.

Providing and fixing on position of M.S. Ladder 0.50 M wide consisting of 75x10mmM.S. flat sasstringers and16mmdiaM.S. barsin two rows as steps placed at 25cm c/c including cost of materials, labour involved, weilding, anchoring and applying 3 coats of anticorrosive paints all complete.

Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed write with cost of wore removal of rust placing the dodo in position all complete as per specification and direction of E/I

Manufacturing, providing and supplying spirally welded/ ERW/ SAW/ fabricated M.S. Pipes (Commercial quality) including procurements of Pates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming V edge on both side ends of pipes including all taxes (central and local), railway freight, insurance unloading from railway wagon, loading into truck, transport to stores/ site, unloading stacking etc. complete as per IS: 3589 and IS 5504 as applicable specifications (No negative tolerance in thickness is permissible.) supply for radial strainer of 219.10 mm (OD) with Pipe thickness 9.50 mm. i) Base rate of 219.10 mm dia OD 9.50 mm thick M.S. pipe Rs. 2955.00 per RMT (MJP Section-I-(XV)-M.S Pipes) P-156 2014 ii) Add @25% for Slotting of Strainer pipe as per design rate Rs. 2955.00 = Rs. 738.75 Per RMT iii) Lowering and Laying of M.S. Pipe upto 250mm dia @ Rs. 282.00 Per RMT (As per MJP Section – I (XVII)/1.a.i)P-188, 2014 Total cost for supply, Slotting, Laying as per Specification a design and as per direction of Engineer in Charge is Rs. 3975.75 per RMT as per design 5 nos. x 3 mtr length

Providing , constructing coffer dam in river basin /dam storages as per type design including excavation , filling the middle portion with B.C. Soil ( in gunny bags if required). Proving impervious and semi pervious materials on both side B.C. soil (in gunny bags if required) including ramming, compacting to the satisfaction of EIC till the completion of works including dismantling of coffer dam after execution of work and disposing off the material as directed by EIC.

Grouting of Reinforcement in Rock bed at foundation level by drilling the rock and grouting the same with cement concrete mixed with chemical admixture as per Direction of EIC. Quantity of MS Tor rod 32mm dia for anchoring 7.5m length

Providing RCC M 200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete, as per building specification and direction of E/I) Used for Concrete quantity for Grouting M20

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading unloading, transportation and overheads etc. all complete as per direction of Engineer-in -charge.

(a) Cement - 10 KM Lead

(b) Sand - 15 KM Lead

(c) Stonechips - 15 KM Lead

(d) Bricks - 10 KM Lead

(e) Steel - 10 KM Lead

Construction of Gang Way 15 M long and 2.0 M wide

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and necessary equipment for designing & construction of Gang Way (Please refer to Section 5,Sl. 2.2 of SBD)

Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, Intake well etc. as per design section in all kinds of soils including moorum soil, soil mixed with canker, pebbles and boulders up to 300 mm size and disposal of the same (beyond 50 m away from the edge of the trenches) with initial lead of 150 m and initial lift of 1.5 m as per specification and direction of E/I.

Excavation for Pier Footing in Bank up to rock level

Earthwork in excavation of foundation trenches in ordinary rock /soft rock ( vide classification of soil item C) with disposal of soil with initial lead of 30 m and lift of 1.5 m including leveling, dressing the foundation trenches, removing roots of trees shrubs etc all complete as per specification and direction of E/I

Earthwork in back filling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and design of Engineer-in-charge (for classification of soil item B & C) Taken as 70% of total earth work

Providing P.C.C M ‐ 150 in nominal mix of(1:2:4)in foundation with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes & royalty all complete as per building specification & direction of E/I. For Raft Foundation

Providing R.C.C M ‐200 in nominal mix of (1:1.5:3) in foundation with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes & royalty all complete as per building specification & direction of E/I. For Raft Foundation

Providing R.C.C M ‐200 with nominal mix of (1:1.5:4) in column with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification & direction of the E/I. For Embankment Pier

Providing R.C.C M ‐ 200 in nominal mix of (1:1.5:3) in Beams all types with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes & royalty all complete as per building specification & direction of E/I

Providing R.C.C. M ‐ 200 with nominal mix of (1:1.5:3) in Deck slab with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification & direction of the E/I

Providing for Reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed write with cost of wore removal of rust placing the dodo in position all complete as per specification and direction of E/I.

Providing and fitting & fixing of handrails as per approved quality wielding etc. to steel ladders rail, balcony railing, Staircase railing including applying primer coat of approved steel primer. M.S Tubes of dia. 42.2 mm @ 3.39 kg/mtr.

Bearing for Deck Slabs and Ramp.

Fixing of Bearing (1 no. fitter Gr. 1, 1 no. welder Gr. 1, 1 no Helper)

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation and overhead etc. All complete as per direction of Engineer -in charge.

(a) Cement - 10 KM Lead

(b) Sand - 15 KM Lead

(c) Stonechips - 15 KM Lead

(d) Steel - 10 KM Lead

Mechanical & Electrical Work at Intake well

Supply, installation, testing and commisssioning of vertical turbine pumpsets with allied equipment as under (Please refer to Section 5,Sl. 2.4 and 2.6 of SBD)

Supplying of Vertical Turbine Water Lubricated Pump Set of KIRLOSKAR/JYOTI/GRSE/Mathar and Platt/WPIL make having discharge against total head with column assembly, with suitable capacity vertical hollow shaft squirrel cage induction motor of KIRLOSKAR/GE/SIEMENS/ Cromlpton/ABB make operated on 415 volt = 10%, 3 phase 50 Hz, AC Supply having seep 1460 rpm. with non reversible ratchet, (Contractor will again have to check the design of motorl Pump and he will to get it approved by the Department) (Pump and Motor) including all taxes and duties as paid to the Govt.

Discharge 45 m3/hr, Head = 20 M and MKW = 5.5 K.W. (1W + IS)

Supplying Installation and commissioning of power control cum Distribution cubical panel board made of 2 mm thick MS, sheet of suitable size, dust and vermin proof consisting of following accessories.

a) Incoming feeder-100 A 4P MCCB, DM 1-0 thermal release adjustable and braking capacity with rotary operating mechanism handle (front drive) of L&T SIEMENS/ALSTOMA/HAVELLS made 3 nos.

b. i) MCCB Bus cupler- 415 V 4 Pole 100 Amps. Rating 1 nos.

b.ii) Bus bar - 4 pole 100 amp. Cpper stripe bus bar enclosed in MS sheet etc. all complete job. - 2 nos. with MCB 32 A - 1 no.

c) 63 Amps MCCB for Pump Motor of L&T/ Havells/Alstom make - 2 nos.

d) DOL starter suitable for 6.5 KV- motors L&T/ Havells/Alstom make - 2 nos.

e) Capacitor Bank for Compensating no load/Light load of transformer with approx 3 KVAR rating.

h) Indicating lamp LED - L&T/SIEMENS make in Red, Yellow and Green color - 1 set. For incommers and Bus Cuplers.

i) 32 amp MCCB for light load and Capacitor Bank feeder including spare of L&T/Havells/ Alstom - 3 nos.

j) 16 A MCB for value actuator - 2 nos.

k) Power factor meter of IMP/L&T make - 2 nos.

Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and internally wired with suitable size of copper wire etc. all complete.

Cost of earthig of installation as per I.E. Rules including the cost of earth pit and 8 SWG copper wire in bunch of two and G.I. pipe all complete to all instrument. For Pump House

Cost of triple spur gear chain puller block of 3 tonne lifting capacity with 5 meter lift complete with load chain and hand chain tested to 50% of over load as per 1.8 3832 carrying ISI mark including over head joint with travelling.

Cost of 50 mm2 x 3.5 core 1.1 KV Grade aluminium conductor PVC insulator PVC sheetsed armored cable including laying on wall or on floor as and where required (from L.T. O.H. and panel) (120 mtr x 2 nos.) CWPH to Intake.

Cost of 16 mm 2 x 3 core aluminium conductor PVC insulated PVC sheated 1.1 KV grade aluminium conductor PVC insulated PVC sheated armored cable including laying on wall or on floor as and where required (from panel to strater to motor).

Cost of 2.5 mm2 x 4 core 1.1. KV Grade copper conductor PVC insulated PVC sheated 1.1 KV grade copper cable including laying on wall or on floow s and where required (from panel to starter to motor).

Cost of providing Electrical Wiring out side the pump house for lighting including cost of MB, HPSV/HPM, Lamp. Of 250/400 W Switches etc. all complete.

Supply Erection, Installation testing and commissining of Instruments and Gauges viz. pressure/Compund Gauge, Mechanical level indicator and level sensor.

Supply Erection, Installation testing and commissioning of Lighting arreter including earthig.

(Mechanical & Electrical Part at WTP)

Suply, installation, testing and commisssioning of horizontal casing centrifugal pumpsets with alied equipment as (Please refer to Section 5,Sl. 2.5 and 2.6 of SBD)

Supplying of Horizontal split casing centrifugal pump set of KIRLOSKAR/CROMPTON/Mathar and Platt make capable of discharge against total head and mounted of common base plate coupled with SPDP squirrel cage suitable capacity induction motor of KIRLOSKAR/ SIEMENS/CROMPTON/ABB make operated on 415 volt/240 volt 3/split phase +10%, 3 phase 50 Hz, A.C. supply having speed 1450/2980 rpm including cost of supplying fitting and fixing of all required accessories such as D.I. D/F special sluice valve, N.R. value, foot value ISI maked and D.I. D/F pipe of suitable size and length as required for suction delivery main etc. all complete including cost of supplying, erecting and commissioning suitable fully automatic star Delta/starter of Seimens/L&T make, (Contractor will once again have to check the design of motor, Pump & he will have to get it approved by the Deptt. (Pump & Motor).

Discharge 42.75 m3/hr, Head = 70 M

Supplying Installation and commissioning of motor control centre panel board, made of suitable size dust and vermin proof consisting of following accessories.

a) Incoming feeder-250 A 4P MCCB, DTH 100 thermal release adjustable and braking capacity with rotary operating mechanism handle (front drive) of L&T SIEMENS/ALSTOMA/HAVELLS made 2 nos.

b) Bus bar - 4 pole 200 amp. Copper strip bus bar in 2 section enclosed in MS sheets etc. all complete job.

MCCB Bus Coupler 415 V 4 Pole 250 Amps 1 no.

c) 100 Amps MCCB for C.W. Pump Motor & outgoing feeder for Raw Water Pump house of L&T/Semiens/Havells make-4 nos.

d) FASD/Soft Starters L&T/ Havells/Alstom make - 2 nos.

e) Capacitor Bank for Compensating no 1 load/Light load of transformer with approx 7 KVAR rating 2 nos.

i) Indicating lamp LED - L&T/SIEMENS make in Red, Yellow and Green color - 1 set. For incommers and Bus Cuplers.

j) Power factor meter of IMP/L&T make - 2 nos.

k.i) 16 A MCB for value actuator - 2 nos.

k.ii) 32 Amp MCB for air blower - 2 nos.

Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and internally wired with suitable size of copper wire etc. all complete.

Cost of earthig of installation as per I.E. Rules including the earth pit and 8 SWG copper wire in bunch of two and pipe all complete in all equipments.

For Transformer - 2 nos.

For Pump House - 2 nos.

Cost of 95 mm2 x 3.5 core 1.1 KV Grade aluminium conductr PVC insulator PVC sheeted armored cable including laying on wall or on floor as and where required (from L.T. O.H. and panel) (50 mtr x 2 nos.) substation to CWPH.

Cost of 16 mm2 x 3 core 1.1. KV Grade aluminium conductor PVC insulated PVC sheeted 1.1. KV grade armored cable including laying on wall or on floor as and where required (from motor panel to DP structure)

Cost of 2.5 mm2 x 4 core 1.1. KV Grade copper conductor PVC insulated PVC sheeted 1.1 KV grade copper cable including laying on wall or on floor as and where required (from panel to starter to motor)

Providing, erecting and commissioning 11 KV lightining arester at WTP substation

Providing, erecting and commissioning of LT distribution BUS on MS angle bracket, LT pin insulator with PIN back clump for LT braket, LT sackele insulator with strap, 8 SWG GI wire and MS nut bolts of different sizes for terminator for transformer secondary and receiving of L.T. pwer supply

Cost of Kiosk Panel by providing and fixing in 415 V 4 Pole 250 Amps MCCB 1 nos. and 25 A Isolator (for interconnection of transformer secondary, metering panel & feeder for load panel at Pump House)

Raw Water Rising main.

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Laying of Raw water Rising Main (Please refer to Section 5,Sl. 3.0 of SBD)

Supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket a n d s p i g o t e n d s confirming to IS8329/2000 in standard lengths of class K-7 suitable for push on joint (Rubber gasket jointing) with cement mortar lining on inside surface and outside zinc coating with bituminous paint including all other taxes insurance including inspection charges and all taxes all complete (Including one no. gasket with each pipe

DI Pipe 150 mm dia Class K-7

Carriage of DI Pipe (500km lead)

DI Pipe 150 mm dia Class K-7

Providing and supplying ISI standard DI specials and fitting with sealing rubber gasket of S.B.R complete with cast iron follower gland and M.S. nut and bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc. complete as per I.S. 9523

Providing Double Flanged Sluice valve confirming to IS 14846 including worn gear arrangements as per test pressure stainless steel, spindle, caps including all transportation etc. complete. (without bypass) with E.D. Sluice Valve PN - 1.6, DI Sluice valve - 150 mm dia

Providing and supplying Air Valves as per IS-10845- 2000 and MJP's standard specifications of approved make and quality of following diameters including all taxes (Central and local), railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation up to departmental stores/ site, unloading and stacking etc. complete. 25 mm dia Air Valve single Ball Flanged/ Screwed Type

Earth Work in excavation (As per IS 3114/1965) for laying of different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer in - Charge (b) for classification of soil item - B. DI Pipe 150 mm dia Class K-7 115 x 0.60 x 1.175 x 60% = 48.65 cum 5% extra for junction = 2.43 cum Total = 51.08 cum

Earth Work in excavation of foundation trenches as per design section in ordinary soft rock (vide classification of soil item - C) and disposal of excavated materials so obtained (50 m away from the edge of the trenches) with initial lead of 150 m and initial lift of 1.5 m as per specification and direction of E/I in ordinary or soft rock (where blasting is not required)

supplying Labours, tools, lubricant etc. for laying and jointing C.I.S./ S tyton pipes (class LA) trenches supplying rubber gasket (Rubber gasket confirming to I.S. 5382-1969) and making gasket joints including providing night guard, barrier and red light to safe guard against accident, all complete (Pipe to be supplied departmentally free of cost and laying of pipes is to be done as per I.S. 3114-1985) as per design, specification and direction of E/I 150 mm dia DI K-7 Pipe

Earthwork in back filing the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge (for classification of Soil item A & B) 80% of total earth work i.e. 0.8 x 85.13= 68.1 cum

Supplying Labor and tools for fixing CI sluice valve trenches with a pair of CI Tail pair (including making) flanged joints as per IS specification, including flanged joints as per IS specification confirming to IS:782 – 1978 confirming to IS:6557 - 1972 and nuts and bolts confirming to ISS:1364 - 1983. Including drilling holes in flanged if required as per specification and direction of E/I (Sluice valve and pieces to be supplied departmentally free of cost). 150 mm dia

Providing laying and fixing in proper alignment in position all types of CI air valves as directed by Engineer-in-Charge including cost of conveyance SOR from store to site of work, cost of all material and giving satisfactory hydraulic testing etc. complete for all class of valve. 25 mm dia

Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20M.x 0.90M. x 1.50M. inner size having 25cm. thick 75A brick masonry wall in C.M. (1:6), over 150mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150mm. thick with 20mm. to 6mm. graded stone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.

Supply all materials & construction of Thrust Block of RCC M - 200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone all complete job as per specification and direction of E/I.

Supplying Labour ,tools and tackles for testing of laid C.I / DI or U.P.V.C or H.D.P.E or A.C pressure pipe up to 60 meter head of water all complete as per specification andection of E/I (Water to be supplied free of cost

150 mm dia. DI K-7

Clear Water Rising main.

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Laying of Clear water Rising Main (Please refer to Section 5,Sl. 3.0 of SBD)

Supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket and spigot ends confirming to IS8329/2000 in standard lengths of class K-7 suitable for push on joint (Rubber gasket jointing) with cement mortar lining on inside surface and outside zinc coating with bituminous paint including all other taxes insurance inspection charges and all taxes all complete (Including one no. gasket with each pipe

DI Pipe 150 mm dia Class K-7

Carriage of DI Pipe (500km lead)

DI Pipe 150 mm dia Class K-7

Providing and supplying ISI standard DI specials and fitting with sealing rubber gasket of S.B.R complete with cast iron follower gland and M.S. nut and bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc. complete as per I.S. 9523

Providing Double Flanged Sluice valve confirming to IS 14846 including worn gear arrangements as per test pressure stainless steel, spindle, caps including all transportation etc. all complete. (Without bye pass) with E.D. Sluice Valve PN - 1.6, Sluice valve - 150 mm dia

Providing and supplying Air Valves as per IS-10845-2000 and MJP's standard specifications of approved make and quality of following diameters including all taxes (Central and local), railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation up to departmental stores/site, unloading and stacking etc. complete. 25 mm dia Air Valve single Ball Flanged/ Screwed Type

Earth Work in excavation (As per IS 3114/1965) for laying of different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer- in - Charge (b) for classification of soil item - B.

Earth Work in excavation of foundation trenches as per design section in ordinary soft rock (vide classification of soil item - C) and disposal of excavated materials so obtained (50 m away from the edge of the trenches) with initial lead of 150 m and initial lift of 1.5 m as per specification and direction of E/I in ordinary or soft rock (where blasting is not required)

Lowering Laying and jointing with SBR rubber gaskets C.I./SS /DI-K7/ DI K9 pipe of various classes with C.I./MS specials of falling diameter in proper position, grade and alignment as directed by Engineer In-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labor, giving hydraulic testing etc. complete (I.S. 5382/12820) Note: Only SBR Rubber gasket to be used as per I.S. 5382/12820 150 mm dia DI K-7

Earthwork in back filing the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge(for classification of Soil item A & B)

Supplying Labor and tools for fixing CI sluice valve trenches with a pair of CI Tail pair (including making) flanged joints as per IS specification, including flanged joints as per IS specification confirming to IS:782 - 1978 confirming to IS:6557 -1972 and nuts and bolts confirming to ISS:1364 -1983. Including drilling holes in flanged if required as per specification and direction of E/I (Sluice valve and pieces to be supplied departmentally free of cost). 150 mm dia

Providing laying and fixing in proper alignment in position all types of CI air valves as directed by Engineer-in-Charge including cost of conveyance from store to site of work, cost of all cost of all material and giving satisfactory hydraulic testing etc. complete for material and giving satisfactory hydraulic testing etc. complete for all class of valve. 25 mm dia

Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20M.x 0.90M. x 1.50M. inner size having 25cm. thick 75A brick masonry wall in C.M. (1:6), over 150mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150mm. thick with 20mm. to 6mm. graded stone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.

Supply all materials & construction of Thrust Block of RCC M - 200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone all complete job as per specification and direction of E/I.

Supplying Labour ,tools and tackles for testing of laid C.I / DI or U.P.V.C or H.D.P.E or A.C pressure pipe up to 60 meter head of water all complete as per specification andection of E/I (Water to be supplied free of cost

150 mm dia. DI K-7

DISTRIBUTION MAIN :-

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labour, materials, equipment to procure and laying of DI class K-7 pipes with Cement Mortar Lining for distribution main (Please refer to Section 5,Sl. 3.0 of SBD)

Earthwork in excavation (As per I.S. 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of Pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer-in-Charge (b) as per classification of soil item - B

Pucca Road (Except Black top only taken out material to be used) for cutting road as per requirement.

Water Bound Macadam road (taken out material will be used) for cutting road as per requirement

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 meter lead and disposal of un-serviceable materials with all leads all complete as per direction of E/I.

Providing PCC M-15 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm -6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening shuttering mixing cement concrete in mixer and placing in position vibrating Striking, curing taxes and royalty all complete as per building specification and direction of E/I.

Earthwork in back filling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and design of Engineer-in- Charge (for classification of soil item B&C)

Supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket a n d s p i g o t e n d s confirming to IS8329/2000 in standard lengths of class K-7 suitable for push on joint (Rubber gasket jointing) with cement mortar lining on inside surface and outside zinc coating with bituminous paint including all other taxes insurance inspection charges and all taxes all complete (Including one no. gasket with each pipe

200 mm dia. DI K-7

150 mm dia. DI K-7

100 mm dia. DI K-7

90 mm dia. HDPE material Grade P.E. 80 (with carriage)

75 mm dia. HDPE material Grade P.E. 100 (with carriage)

63 mm dia. HDPE material Grade P.E 100 (with carriage)

Providing and supplying ISI standard D.I. specials & fitting with sealing rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc. complete as per I.S. 9523

Carriage of DI Pipe (500km lead)

200 mm dia. DI K-7

150 mm dia. DI K-7

100 mm dia. DI K-7

Supply labours, tools, tackles, lubricant etc. for laying and jointing C.I. S/S tyton pipes (Class LA) trenches supplying rubber gasket (Rubber gaskets confirming to I.S.S. -5382 -1969) and making gasket joints including providing night guard, barrier and red light to safe guard against accident, all complete (pipe to be supplied departmentally free of cost and laying of pipes is to be done as per I.S.S. 3114-1985 as per design and direction of E/I

200 mm dia. DI

150 mm dia. DI

100 mm dia. DI

Lowering Laying and jointing of HDPE pipes by heating to the ends of pipe with the help of Tefflon coalte electic mirror/Heater to be required tempetature and the pressing them the ends together against each other to form a monotithic and leacproof joint by tehrmosetting process. The pressing may be required to be done with hydraulic Jacks/BUTT fusion machine etc. complete with all materials labours as directed by Engineer In Charge, including giving satisfactory hydraulic test. For all classes.

63 mm dia. HDPE Pipe

75 mm dia. HDPE Pipe

90 mm dia. HDPE Pipe

Providing Double Flange Sluice valve confirming to IS 14846 including worm gear arrangements as per test pressure stainless steel, spindle, caps including all transportation etc. complete PN - 1.0 without Bypass with E.D.

200 mm dia.

150 mm dia.

100 mm dia.

80 mm dia.

65 mm dia.

Providing Double Flange Sluice valve confirming to IS 14846 including worm gear arrangements as per test pressure stainless steel, spindle, caps including all transportation etc. complete (for scouring purpose)

80 mm dia Sluice valves – PN – 1 (without bypass)

Providing Double Flanged short body pattern type manually operated Butterfly Valve having body, dise and end cover in graded cast iron to IS 210 Gr. CF 200 generally confirming in to IS 13095-1991, synthetic rubber faced ring secured on dise by retaining ring with stainless steel screw stub shaft of stainless steel riding in Teflon bearing excluding C.C foundation / Structural steel support a) Butterfly valve PN 1 (with Byepass arrangement) to be fitted with Eater Meter

For 80 mm dia. pipe

For 100 mm dia. pipe

For 200 mm dia. pipe

Supply Labour and tools for fixing CI sluice valve trenches with a pair of C.I. Tail pair including making) flanged joints as per I.S. specification including flanged joints as per IS specifications conforming to IS-782-1978 confirming to I.S. 6557 - 1972 and nuts and bolts confirming to I.S.- 1364-1983) including drilling holes in flanged if required as per specification and direction of E/I. (Sluice valve and pieces to be supplied departmentally free of cost.).

150 mm dia.

100 mm dia

80 mm dia.

65 mm dia.

Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20M.x 0.90M. x 1.50M. inner size having 25cm. thick 75A brick masonry wall in C.M. (1:6), over 150mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150mm. thick with 20mm. to 6mm. graded stone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.

Providing, installing and giving satisfactory field testing of flanged ends Bulk water meter of following type and as mentioned below in (a) and (b) with FGI-250 cast iron body, class “B” confirming to IS:2373 or as per ISO-4064, marked to read in metric system, along with manufacturer’s test and gurantee certificate including cost of all materials and labour with ISI mark or EEC mark. 50 mm dia.

Strainers (Filter or Dirt Box) Providing, and fixing Strainer for water meters including cost of all material and labour. a) Brass Forged Strainer “Y” Type with screwed ends 15 mm dia.

Providing and constructing B.B. masonary chamber with 15 cm thick 1:3:6 proportion PCC bedding including excavation, BB Masonary in C.M. 1:5 proportion precast RCC Frame and cover etc as directed by EIC Meter chamber of size 90 x 45 cm internal size and depth up to 1.2 M with precast RCC slab cover

PW 6 Dismantling Joints Providing, erecting and commissioning M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 working pressure with required flanges of suitable size with nut bolts etc complete. The joint should have through long bolts so that during normal working pressure there should be no sliding movement of sliding flanges. L.O.F. ( length over flange ) should not be less than 75% of dia.

200 mm dia. Joint

150 mm dia. Joint

100 mm dia. Joint

90 mm dia. Joint

Supply all materials & construction of Thrust Block of RCC M - 200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone all complete job as per specification and direction of E/I.

Supplying Labour ,tools and tackles for testing of laid C.I / DI or U.P.V.C or H.D.P.E or A.C pressure pipe up to 60 meter head of water all complete as per specification andection of E/I (Water to be supplied free of cost

200 mm dia. DI K-7

150 mm dia. DI K-7

100 mm dia. DI K-7

90 mm dia. HDPE material Grade P.E. 80 (with carriage)

75 mm dia. HDPE material Grade P.E. 100 (with carriage)

63 mm dia. HDPE material Grade P.E 100 (with carriage)

Twin Type Staff Quarter - 1 Unit (Please refer to Section 5,Sl. 2.7 of SBD)

E/W in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) & disposal of excavated earth obtained to a distance up to 50 M including all lift leveling, ramming the foundation trenches removing root of trees, scrubs all complete as per approved design

Providing, coarse clean sand in filling in foundation trenches/in plinth including ramming & watering in layers not exceeding 150 mm thick with all leads, including cost of materials, labour, royalty & taxes all complete as per building specification & direction of E.I.

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 100 in nominal mix of (1:3:6) in foundation with approved quantity of stone metal grade - III (50mm to 25mm. size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening, materials, scaffolding, raking out joints to 15 mm depth curing, taxes & royalty all complete as per building specification & direction of E/I

Providing 25 mm thick damp proof coarse with cement concrete M - 150 with nominal mix of (1:2:4) with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer with 5% cico or any other approved water proofing compound & placing in position, vibrating, striking, curing, taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening, materials, scaffolding, raking out joints to 15 mm depth curing, taxes & royalty all complete as per building specification & direction of E/I

Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) in Intel level with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, concreting, shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, 6 mm cement plaster (1:4) in ceiling & sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification of E/I

Providing average 63 mm thick R.C.C. M - 200 with nominal mix of (1:1.5:3) chajja in shelves with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, 6 mm cement plaster (1:4) in ceiling & sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification of E/I

Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification & direction of the E/I

Supplying fitting & fixing good quality, well dressed &well seasonedsal wood work in choukhat in doors, windows, skylights, fan light and celestial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of the E/I

Supplying fitting & fixing 250*20*6 mm L-type M.S. Clamp properly fish tailed including making holes and setting the same in 375*125*75 mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification & direction of E/I

Supplying all materials, labours and fitting & fixing 38 mm (1.5) thick well seasonedsal wood battened shutter ledged & braced in door and windows with oxidized iron fitting such as hinges, sliding door bolts, tower bolts, handles or rings, hooks and eyes, cleats, sand block as per schedule, taxes & royalty all complete as per building specification & direction of Engineer - in - Charge

Supplying, fitting & fixing M.S./Grill made of 20*6 mm M.S. Flat as pr approved design & drawing properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per the building specification and direction of E/I. (where materials is not supplied by the Dept.)

Providing 25 mm thick pre cast R.C.C. M - 150 with nominal mix of (1:2:4) in jail with approved quality of stone chips of 6 mm nominal size and clean coarse sand of FM 2.5 to 3 with 1.6 mm thick M.S. wire as per approved design and drawing and placing grouted with cement mortar (1:3) including cost of curing, scaffolding and finishing all complete as per building specification and direction E/I

Providing and fixing fan hook of 16 mm dia M.S. bar 1 meter long bent to required size and shape placed in position and fixing in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I

Supplying, fitting & fixing M.S./Grill gate made of 20*6 mm M.S. Flat fitted on 25 mm * 25 mm 6 mm M.S. angle frame as pr approved design & drawing properly fabricated with joints continuous fillet welded and finished smooth, providing necessary locking arrangements with Haskell & dummy duly fixed in C.C.(1:2:4) blocks of required size applying a red lead paints over steel works, taxes, carriage of grill to work site, as per the building specification and direction of E/I. (where materials is not supplied by the Dept.)

Providing 6 mm thick cement plaster (1:4) in ceiling with approved quality of coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding, taxes & royalty all complete as per building specification& direction of E/I.

Providing 12 mm thick cement plaster (1:6 ) with approved quality of clean coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding, taxes & 7 royalty all complete as per building specification & direction of E/I.

Providing all materials ,labors& doing 0.5" (12mm) plaster with cement mortar (1:3) using clean coarse sand finishing with neat punning a dado 6" (150 mm) high a side room and outside wall up to plinth level including screening, curing with all leads & lifts of water, scaffolding, taxes and royalty all complete as per building specification & direction of E/I.

Providing average 115 mm thick lime tracing (24 lime:36 shurkhi: 100 brick khoa) well beaten and compacted including maintaining proper level & slope, making ghundi with finishing treatment, cost of labor, curing, royalty & taxes all complete as per specification & direction of E/I.

Filling in foundation trenches & plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m & lift of 1.5 m all complete as per building specification & direction of E/I.

Providing average 150 mm thick dry rammed khoa bitten to 112 mm (compacted with water) made of well burnt of jhama bricks including ramming properly till compacted thickness is achieved, curing & carriage of water with all leads making proper slope & blending the top with cement mortar (1:10) all complete as per building specification & direction of E/I.

Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all complete as per building specification & direction of E/I.

Providing designation 75A brick on edge flooring in Cement morter (1:4) with top surface flush pointed in cement morter (1:4) with approved quality of sand including cost of curing, taxes & royalty all complete as per building specification & direction of E/I

Providing all materials, labors &doing 3 (three) coat white washing with approved quality of lime over the new surface including the cost of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification & direction of E/I.

Providing all materials, labours & doing 2 (two) coats colour washing over a coat of white wash with approved quality of lime & colour over the new surface including the cost of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I.

Providing 2 (two) coats of painting with ready mixed paint over a coat of primer of approved shade and make over new wooden surface including preparing the surface after cleaning, removing dirt scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, smokes, grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification & direction of E/I.

Providing 2 (two) coats of painting with ready mixed paints of approved shade & make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification & direction of E/I.

Providing for reinforced as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed write with cost of wore removal of rust placing the dodo in position all complete as per specification and direction of E/I.

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 15 KM lead

Bricks 10 KM lead

Stone/Stone Chips 15 KM lead

Water Supply Sanitation Installation (Plumbing work)

Supplying and laying GI pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials up to work site etc. all complete as per specification and direction of E/I.

i) 25mm GI. Pipe.

ii) 15 mm GI. Pipe.

Supplying materials and labours for fixing GI Pipes with red lead paints and yarn with screwed and sockted joints on wall, celling and floor including supplying of wall hooks of pipe clamp, wooden plugs, cutting pipe to size and threading ends where necessary all complete as per specification and direction of E/I.

i) 15 mm GI. Pipe

Supplying, fitting and fixing of GM ferrule of approved make in DI/CI main including drilling and tapping CI/DI main etc. all complete as per specification and direction of E/I.

Supplying and fixing GI fittings of approved make all complete as per direction of E/I.

(a) Elbow 15 mm dia

(b) Tee plane 15mm dia

(c) Nipple 15mm dia.

(d) Union Socket 25mm dia

(e) Union Socket 15mm dia

(f) Brass bib cock 15mm dia

(g) C.I stop cock 15mm dia

(h) C.I. stop cock 25mm dia

(i) Reducing Socket 25x15mm

(j) Tee 25x25x15mm dia

Supplying, fitting and fixing vitreous white glazed earthen were I W C of parry Hindustan or any other I.S.S approved make with 100 mm HCI ‘P’ trap, 15 Liters CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings C.I. or C.C brackets, 32 mm, alkathene /PVC telescopic flush pipe about 2 mtrs. long with one brass coupling and clamps, GI chain and pull including supplying and fixing a pair of vitreous white glazed earthen were footrest to be fixed in floor, 15 mm .CI body brass spindle, stop cock of weight not less than 50 grams, 15 mm. PVC connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (510mm.long with 12.5 Liter low level PVC System).

SEPTIC TANK and SOAK PIT

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.

Providing designation 75A one Brick flat soling, joints filled with local sand including cost of watering, tax, royalty all complete as per building specification and direction of E/I.

Providing P.C.C M150 with nominal mix of (1:2:4) in foundation with approved stone chips 20mm to 6mm size well graded and clean course sand of FM-2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing water proof cement plaster (1:3) with clean course sand of F.M- 1.5mm with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per building specification and directions of E/I.

(a) 19 mm thick

(b) 12 mm thick

Providing designation 75A bricks work in C.M. in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials racking out joints to 15 mm. depth, curing taxes and royalty all complete as per building specification and direction of E/I.

(a) B/W in C.M (1:4)

(b) B/W 75-B in (1:6) for Soak pit

(c) Brick work in dry masonry for soak pit.

Providing pre cast R.C.C. M-150 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of FM 2.5 to 3 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement), taxes and royalty etc. all complete as per building specification and direction of E/I.

Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I.

10 mm dia

Supplying fitting and fixing H.C.I. Pipe/ H.C.I. fitting of Approved make confirming to I.S.S 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.

(a) 100mm dia H.C.I. Tee.

(b) 100mm dia H.C.I. Band

(c) 50mm dia H.C.I. Cowel

(d) 50mm dia H.C.I. Vent pipe

(e) 100mm H.C.I. Pipe

Supplying materials and labours and fixing 20mm dia M.S bar steps in wall of 0.3 m interval and staggered in (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I.

Supplying all materials, labours, tools and tackles and 100mm dia R.C.C hume pipe and laying jointing, testing, earth work including carriage of materials etc. all complete.

Supplying 50mm size brick bats and filling in soak pit including carriage and labours etc. all complete as per direction of E/I.

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475 mm G.I. Cover With frame ( Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I

Carriages of materials

(a) Brick –10 KM lead

(b) Sand -15 KM lead

(c) Stone chips -15 KM lead

(d) Steel 10 KM

(d) Cement- 10 KM lead

Electrical Works

Point wiring in PVC conduit with modular type switch wiring for light point /fan point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for twin control light point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with two way modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for light /power plug point with 2 x 4 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with one no 4 sqmm FR PVC insulated copper conductor single core cable for loop earthing etc as required

Copper sub main wiring in PVC conduit Wiring for sub main wiring with PVC insulated copper conductor single core in surface/recessed PVC conduit as required

2 x 1.5 sqmm + 1 x 1.5 sqmm earth wiring

2 x 2.5 sqmm + 1 x 2.5 sqmm earth wiring

Supplying and fixing following way three pole and neutral sheet MCB distribution board 415 volts on surface/recessed complete with tinned copper bush bars ,neutral link, earth bar, din bar, detachable gland plate inter connection phosphatised and power painted including earthing etc as required (but with out mcb / rccb / Isolator) (4 +12 ) double door horizontal type

Supplying and fixing 5 amp to 32 amp, rating 240 volts, B series miniature circuit breaker of single poles in existing MCB DB complete with connecting ,testing, and commissioning etc as required

Earthing with G.I. earth pipe 4.5 M long 40mm dia including accessories and providing masonry enclosure with copper plate having locking arrangement and watering pipe etc with charcoal ,salt all complete as per electrical rule

Supplying ,fitting and fixing following sizes of PVC conduct along with accessories in surface / races including cutting the wall and making good the same in case of recessed conduit as required

PVC con 20 mm PVC pipe

PVC con 25 mm PVC pipe

Installation commissioning and testing Ceiling Fan

Carriage of ceiling fan and regulator

Supplying ,fitting and fixing 5 amp ceiling rose on the existing junction

Supplying ,fitting and fixing breas batten/ angle holder including connection etc.

Supplying ,fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 3 pin 5/6 amp modular type switch, connection, painting etc as required.

Supplying ,fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 6 pin 5/6 amp and 15/16 amp socket outlet and 15/16 amp modular type switch, connection, painting etc as required.

Supplying and drawing co-axial T.V. cable RG-06 grade 0.7 nn solid copper conductor PE insulated seilded with fine tinned cover braid and protected with PVC sheath in the existing surface / recessed steel/ PVC conduit as required.

Supplying and fixing modular switch / socket on the existing modular plate and switch box including connection but excluding modular plate etc,as required. TV antenna socket out put

Supplying ,fitting and fixing modular base and cover plate on existing modular metal boxes etc as required.

Cost of Earthing with G.I. earth pipe 4.5 M long 40mm dia G.I.Pipe 600mm x 600mm x 6mm thick copper earth plate, and 8 SWG copper wire including cost of making 1.2x1.2x3m deep pit and filling with charcoal ,salt all complete as per electrical rule

Compound Wall/ Boundry Wall for WTP, Sump & ESR. (240 M Long)

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority Construction of Compound wall. etc. all complete job.(Please refer to Section 5,Sl. 2.9 of SBD)

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item A) and disposal of excavated earth so obtained to a distance upto 50 M including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. Excavation Qty.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I.(Mode of measurement compacted volume).

Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade - III ( 50mm to 25mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. Qnty in Foundation:

Providing designation 75 A brick work in CM (1:6) in foundation and plinth with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing RCC M - 150 in band at plinth level with norminal mix of (1:2:4) in foundation and plinth with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, and mixing cement concrete in mixer and placing in position vibrating striking, curing, (but excluding the cost of reinforce-ment,taxes and royalty all complete, as per building specification and direction of E/I.

Providing designation 75 A brick work in CM (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including, providing 10mm thick mortar joints cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C M - 150 with nominal mix of (1:2:4) in band at lintal level with approved quality of stone chips 20 mm to 6mm size graded and clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing(but excluding the cost of reniforcement , taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C M - 150 with nominal mix of (1:2:4) in stiffners with approved quality of stone chips 20 mm to 6mm size graded and clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing , taxes and royalty all complete as per building specification and direction of E/I.

Providing Tor steel reinforcement of 10 mm ,12 mm , &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site , cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , Placing the rods in position all complete as per building specification and direction of E/I

Supplying fitting & Fixing M.S. grill gate with M.S. grills made 20x6mm M.S. flat or 16mm M.S. square bars fitted 25x25x6 mm M.S. angle frame of size 60x60x6 mm including cost of fabrication,providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work , taxes all complete as per drawing specification and direction of E/I.

Cost of 50 x 50 x 6 mm M.S. Angle including all taxes and royalty and carriage as per specification and direction of E/I 40nosx1.0m =40.00m @4.50kg/m Total = 180 kg

Cost of Barbed wire of 4 point 2 ply 12 SWG ,150 mm apart.

Labour for cutting of M.S Angle iron post to required length one end splitted as fishtailed in a length of 150 mm complete as per building specification and direction of E/I .

Drilling 6 mm holes M.S angle iron for fixing of staples etc. as per building specification and direction of E/I .

Supplying fitting & Fixing straining bolt with nut size 25 cm x 10 mm dia tighten the barbed wire corner post complete as per building specification and direction of E/I .

Labour for fitting and fixing barbed wire fencing in four rows horizontal up to height of 1.25 M and two diagonals including fixing of post in cement concrete at 2.5 M . Centers including cost of staples (but excluding the cost of cement concrete angle iron post its cutting and making holes ,nut and bolts )all complete as per building specification and direction of E/I .

Providing 12mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direction of E/I.

Colour washing two coats over a coat of white wash over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke & mosh marks with jhama, rubbing, scaffolding, washing of floors and taxes all complete as per building specification & direction of E/I.

Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading ,unloading transportation are complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 15 KM lead

Bricks 15 KM lead

Stone/Stone Chips 15 KM lead

Approach Road (45M Long x 3.60M)

Construction of embankment with approved material obtained from borrow pit with a lift up to 1.5 m, transporting to site, spreading, grading to required slop and compacting to meet requirement of tables 300. 1 and 300.2 with a lead up to 1000 m as per technical specification clause 301.15. with initial lead of 30M and lift of 1.5M

Construction of granular sub base by providing well graded materials spreading in uniforms lyres with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieved the desired density complete as per technical specification clause 401.

Providing and laying P.C.C. or R.C.C.M. - 100 with nominal mix of (1:3:6) in various components of dam foundation with approved quality of 40mm graded coarse aggregate of required grade as per design and approved quality of sand of requisite F.M. (2.5 to 3.0) washed and screened excluding cost of shuttering or form work as well of reinforcement. Its cutting, bending, binding and placing but including necessary tools and plants and vibrating, curing, royalty all taxes etc. complete job as per specification and direction of E/I.

Providing and laying P.C.C. or R.C.C.M. - 150 with nominal mix of (1:2:4) in 20mm graded coarse aggregate of required grade as per design and approved quality of sand of requisite F.M. (2.5 to 3.0) washed and screened excluding cost of shuttering or form work as well of reinforcement. Its cutting, bending, binding and placing but including necessary tools and plants and vibrating, curing, royalty all taxes etc. complete job as per specification and direction of E/I.

Carriage of material from divisional store kiln side or quality side to work site including contractor profit loading, unloading transportation are complete

Cement 10 KM lead

Sand 15 KM lead

Stone/Stone Chips 15 KM lead

Duty Room (Please refer to Section 5,Sl. 2.7 of SBD)

E/W in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) & disposal of excavated earth obtained to a distance up to 50 M including all lift leveling, ramming the foundation trenches removing root of trees, scrubs all complete as per approved design

Providing, coarse clean sand in filling in foundation trenches/in plinth including ramming & watering in layers not exceeding 150 mm thick with all leads, including cost of materials, labour, royalty & taxes all complete as per building specification & direction of E.I.

Providing P.C.C M - 100 in nominal mix of (1:3:6) in foundation with approved quantity of stone metal grade - III (50mm to 25mm. size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening, materials, scaffolding, raking out joints to 15 mm depth curing, taxes & royalty all complete as per building specification & direction of E/I

Providing 25 mm thick damp proof coarse with cement concrete M - 150 with nominal mix of (1:2:4) with approved quantity of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer with 5% cico or any other approved water proofing compound & placing in position, vibrating, striking, curing, taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening, materials, scaffolding, raking out joints to 15 mm depth curing, taxes & royalty all complete as per building specification & direction of E/I

Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) in Intel level with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, concreting, shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, 6 mm cement plaster (1:4) in ceiling & sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification of E/I

Providing average 63 mm thick R.C.C. M - 200 with nominal mix of (1:1.5:3) chajja in shelves with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, 6 mm cement plaster (1:4) in ceiling & sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification of E/I

Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification & direction of the E/I

Supplying fitting & fixing good quality, well dressed &well seasonedsal wood work in choukhat in doors, windows, skylights, fan light and celestial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of the E/I

Supplying fitting & fixing 250*20*6 mm L-type M.S. Clamp properly fish tailed including making holes and setting the same in 375*125*75 mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification & direction of E/I

Supplying all materials, labours and fitting & fixing 38 mm (1.5) thick well seasonedsal wood battened shutter ledged & braced in door and windows with oxidized iron fitting such as hinges, sliding door bolts, tower bolts, handles or rings, hooks and eyes, cleats, sand block as per schedule, taxes & royalty all complete as per building specification & direction of Engineer - in - Charge

Supplying, fitting & fixing M.S./Grill made of 20*6 mm M.S. Flat as pr approved design & drawing properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per the building specification and direction of E/I. (where materials is not supplied by the Dept.)

Providing and fixing fan hook of 16 mm dia M.S. bar 1 meter long bent to required size and shape placed in position and fixing in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I

Providing 6 mm thick cement plaster (1:4) in ceiling with approved quality of coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding, taxes & royalty all complete as per building specification& direction of E/I.

Providing 12 mm thick cement plaster (1:6 ) with approved quality of clean coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding, taxes & 7 royalty all complete as per building specification & direction of E/I.

Providing all materials, labours & doing 0.5" (12mm) plaster with cement mortar (1:3) using clean coarse sand finishing with neat punning a dado 6" (150 mm) high a side room and outside wall up to plinth level including screening, curing with all leads & lifts of water, scaffolding, taxes and royalty all complete as per building specification & direction of E/I.

Providing average 115 mm thick lime tracing (24 lime:36 shurkhi: 100 brick khoa) well beaten and compacted including maintaining proper level & slope, making ghundi with finishing treatment, cost of labor, curing, royalty & taxes all complete as per specification & direction of E/I.

Filling in foundation trenches & plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m & lift of 1.5 m all complete as per building specification & direction of E/I.

Providing average 150 mm thick dry rammed khoa bitten to 112 mm (compacted with water) made of well burnt of jhama bricks including ramming properly till compacted thickness is achieved, curing & carriage of water with all leads making proper slope & blending the top with cement mortar (1:10) all complete as per building specification & direction of E/I.

Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all complete as per building specification & direction of E/I.

Providing all materials, labors &doing 3 (three) coat white washing with approved quality of lime over the new surface including the cost of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification & direction of E/I.

Providing all materials, labours & doing 2 (two) coats colour washing over a coat of white wash with approved quality of lime & colour over the new surface including the cost of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I.

Providing 2 (two) coats of painting with ready mixed paint over a coat of primer of approved shade and make over new wooden surface including preparing the surface after cleaning, removing dirt scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, smokes, grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification & direction of E/I.

Providing 2 (two) coats of painting with ready mixed paints of approved shade & make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification & direction of E/I.

Providing for reinforced as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed write with cost of wore removal of rust placing the dodo in position all complete as per specification and direction of E/I.

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 15 KM lead

Bricks 10 KM lead

Stone/Stone Chips 15 KM lead

Water Supply Sanitation Installation (Plumbing work)

Supplying and laying GI pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials up to work site etc. all complete as per specification and direction of E/I.

i) 25mm GI. Pipe.

ii) 15 mm GI. Pipe.

Supplying materials and labours for fixing GI Pipes with red lead paints and yarn with screwed and sockted joints on wall, celling and floor including supplying of wall hooks of pipe clamp, wooden plugs, cutting pipe to size and threading ends where necessary all complete as per specification and direction of E/I.

i) 15 mm GI. Pipe

Supplying, fitting and fixing of GM ferrule of approved make in DI/CI main including drilling and tapping CI/DI main etc. all complete as per specification and direction of E/I.

Supplying and fixing GI fittings of approved make all complete as per direction of E/I.

(a) Elbow 15 mm dia

(b) Tee plane 15mm dia

(c) Nipple 15mm dia.

(d) Union Socket 25mm dia

(e) Union Socket 15mm dia

(f) Brass bib cock 15mm dia

(g) C.I stop cock 15mm dia

(h) C.I. stop cock 25mm dia

(i) Reducing Socket 25x15mm

(j) Tee 25x25x15mm dia

Supplying, fitting and fixing vitreous white glazed earthen were I W C of parry Hindustan or any other I.S.S approved make with 100 mm HCI ‘P’ trap, 15 Liters CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings C.I. or C.C brackets, 32 mm, alkathene /PVC telescopic flush pipe about 2 mtrs. long with one brass coupling and clamps, GI chain and pull including supplying and fixing a pair of vitreous white glazed earthen were footrest to be fixed in floor, 15 mm .CI body brass spindle, stop cock of weight not less than 50 grams, 15 mm. PVC connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (510mm.long with 12.5 Liter low level PVC System).

SEPTIC TANK and SOAK PIT

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.

Providing designation 75A one Brick flat soling, joints filled with local sand including cost of watering, tax, royalty all complete as per building specification and direction of E/I.

Providing P.C.C M150 with nominal mix of (1:2:4) in foundation with approved stone chips 20mm to 6mm size well graded and clean course sand of FM-2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing water proof cement plaster (1:3) with clean course sand of F.M- 1.5mm with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per building specification and directions of E/I.

(a) 19 mm thick

(b) 12 mm thick

Providing designation 75A bricks work in C.M. in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials racking out joints to 15 mm. depth, curing taxes and royalty all complete as per building specification and direction of E/I.

(a) B/W in C.M (1:4)

(b) B/W 75-B in (1:6) for Soak pit

(c) Brick work in dry masonry for soak pit.

Providing pre cast R.C.C. M-150 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of FM 2.5 to 3 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement), taxes and royalty etc. all complete as per building specification and direction of E/I.

Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I.

10 mm dia

Supplying fitting and fixing H.C.I. Pipe/ H.C.I. fitting of Approved make confirming to I.S.S 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.

(a) 100mm dia H.C.I. Tee.

(b) 100mm dia H.C.I. Band

(c) 50mm dia H.C.I. Cowel

(d) 50mm dia H.C.I. Vent pipe

(e) 100mm H.C.I. Pipe

Supplying materials and labours and fixing 20mm dia M.S bar steps in wall of 0.3 m interval and staggered in (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I.

Supplying all materials, labours, tools and tackles and 100mm dia R.C.C hume pipe and laying jointing, testing, earth work including carriage of materials etc. all complete.

Supplying 50mm size brick bats and filling in soak pit including carriage and labours etc. all complete as per direction of E/I.

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475 mm G.I. Cover With frame ( Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I

Carriages of materials

(a) Brick –10 KM lead

(b) Sand -15 KM lead

(c) Stone chips -15 KM lead

(d) Steel 10 KM

(d) Cement- 10 KM lead

Electrical Works

Point wiring in PVC conduit with modular type switch wiring for light point /fan point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for twin control light point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with two way modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for light /power plug point with 2 x 4 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with one no 4 sqmm FR PVC insulated copper conductor single core cable for loop earthing etc as required

Copper sub main wiring in PVC conduit Wiring for sub main wiring with PVC insulated copper conductor single core in surface/recessed PVC conduit as required

2 x 1.5 sqmm + 1 x 1.5 sqmm earth wiring

2 x 2.5 sqmm + 1 x 2.5 sqmm earth wiring

Supplying and fixing following way three pole and neutral sheet MCB distribution board 415 volts on surface/recessed complete with tinned copper bush bars ,neutral link, earth bar, din bar, detachable gland plate inter connection phosphatised and power painted including earthing etc as required (but with out mcb / rccb / Isolator) (4 +12 ) double door horizontal type

Supplying and fixing 5 amp to 32 amp, rating 240 volts, B series miniature circuit breaker of single poles in existing MCB DB complete with connecting ,testing, and commissioning etc as required

Earthing with G.I. earth pipe 4.5 M long 40mm dia including accessories and providing masonry enclosure with copper plate having locking arrangement and watering pipe etc with charcoal ,salt all complete as per electrical rule

Supplying ,fitting and fixing following sizes of PVC conduct along with accessories in surface / races including cutting the wall and making good the same in case of recessed conduit as required

PVC con 20 mm PVC pipe

PVC con 25 mm PVC pipe

Installation commissioning and testing Ceiling Fan

Carriage of ceiling fan and regulator

Supplying ,fitting and fixing 5 amp ceiling rose on the existing junction

Supplying ,fitting and fixing breas batten/ angle holder including connection etc.

Supplying ,fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 3 pin 5/6 amp modular type switch, connection, painting etc as required.

Supplying ,fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 6 pin 5/6 amp and 15/16 amp socket outlet and 15/16 amp modular type switch, connection, painting etc as required.

Supplying and drawing co-axial T.V. cable RG-06 grade 0.7 nn solid copper conductor PE insulated seilded with fine tinned cover braid and protected with PVC sheath in the existing surface / recessed steel/ PVC conduit as required.

Supplying and fixing modular switch / socket on the existing modular plate and switch box including connection but excluding modular plate etc,as required. TV antenna socket out put

Supplying ,fitting and fixing modular base and cover plate on existing modular metal boxes etc as required.

Cost of Earthing with G.I. earth pipe 4.5 M long 40mm dia G.I.Pipe 600mm x 600mm x 6mm thick copper earth plate, and 8 SWG copper wire including cost of making 1.2x1.2x3m deep pit and filling with charcoal ,salt all complete as per electrical rule

House Connection for 1410 nos Consumer.

Earth work in excavation(as per IS 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.

Providing and supplying blue MDPE pipes confirming to ISO 4427:1996 manufactured from vergin resin PE 80 food grade compounded raw material having blue colour only with quality assurance certificate from ISO certified reputed quality agencies for usage in drinking water with quality system all complete including cost all taxes, inspection charges transportation to work site all complete job as per specification and direction of E/I. 20 mm dia pipe

Providing and fixing 15 mm dia brass Stop cock of approved quality all complete as per specification and direction of E/l .

Laying of PVC pipes of approved make in trenches with solvent cement and cutting pipes to size, where necessary etc. all complete as per specification and direction of E/l

Providing and supplying of compression fittings PN-16 rated in confirmation to ISO 14236:2000 and shall be tested as per ISO:3459,ISO : 3501 and ISO:3503 suitable for drinking water and approved by ISO ceritifed agency etc. in food grade poly propyline and shall be inclusive of all cost such as testing, all taxes , inspection charges, transportation to work site as per specification and direction of E/I.

Reducing socket 20 x 15mm dia

Elbow 20 x 15 mm dia

Coupling 20 x 20 mm dia

Elbow 15 mm dia

Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dia ferrule weight not less than 425 gram

Providing, installing and giving satisfactory field testing of 15 mm dia (without remote reading facility) Domestic Water Meter, horizontal inferential single or multijet Domestic Water test certificate and guarantee certificate including cost of all 779/1994 (VI Revision) with ISI mark along with manufacturer's couplings at both ends and confirming to class " B as per IS temperature duly sealed against tempering complete with magnetic drive and dry dial suitable for ambit 500 C meter , horizontal inferential single or multijet.

Providing & Supply of Clamp Saddle (DI Strap Saddle) for House Service connections from metal pipe Water Distribution mains shall be of fastened strap type with thread outlet for service connection. Clamp Saddle shall be suitable for nominal size of distribution mains pipe line.The strap shall be elastomer coated (insulated) type for firm grip on pipe as well as to protect the coating on the pipe and to insulate the unidentical metals . the saddle shall be single strap type up to pipe sizes of NB 600 and service outlet 15 mm ,15 mm ,20 mm & 25 mm . Fasteners shall be of threaded nut- bolt -washer type .the sealing between the saddle and mains shall be obtained by using a profiled elastomer seal matching to the curvature of the pipe . The seal shall be of elastomer type , material of construction of the body , straps , fasteners etc., shall be of non corrosive material such as engineering plastic (PE/PP ) or stainless steel or a combination of both. 100 NB x 15 mm,20 mm ,25 mm

Earth work in back fillingthe trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.

Operation & Maintenance for Five years

O/M work with Labour component & Materials for 1st Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 2nd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 3rd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 4th Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 5th Year

As per SBD Section - 5 Clouse 9.10

Add 12% GST

Add 1% Labour Cess

SURYA INTERNATIONAL

APURV INFRA