CONSTRUCTION OF OFFICE COMP...

Providing and fixing coloured self addhesive PU-Tactile tile, ground surface indicators (made of Polyurethane) of size 300mmx300mm for guiding/direction/warning to the visually impaired visitors in the centre/side of the pedstrain/approach pathway as per design/specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing coloured ceremic (Tactile) tile, ground surface indicators of size 300 x 300mm of approved make for guiding/direction/warning to the visually impaired visitors, in the centre/side of the pedstrain/approach pathway as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles as per design/specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge. Note: The tile shall be premium quality (1st quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT and JOHNSONS (NS)

Design, supply, fabrication and fixing of acrylic, non-glare, tactile audio building layout as per the approved size, design and make, having 3mm thick acrylic non glare base plate of the approved colour and non-glare acrylic cut out symbols and upper case Sans Serif letters of 12mm height, raised 3mm above base plate and Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. The map to be installed at the specified location as per accessibility standards, shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge. Height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed complete as per design / specifications and guidelines as per the entire satisfaction of the Engineer-in-charge (NS)

Providing and fixing Multilingual and tactile Emergency evacuation map of each floor indicating the current position of the viewer saying `YOU ARE HERE` of 15mm height letters in red with white background, indicating the emergency exits, locations of fire extinguishers etc. Signs shall have a solid header with the text “EVACUATION PLAN” in contrasting uppercase letters no less than 3/4` in height. The size of the board shall be 2ft x 2ft and shall be installed at a height of 1200mm from FFL and shall be oriented to the position of the viewer as per the direction of the site engineer complete as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS)

Providing and fixing of SS, non-glare multilingual Braille (raised dots) ENTRANCE SIGNAGE (size 1 ft x 1 ft) as per the approved design and make, indicating the name of the building having 1.2mm thick SS non glare blue colored base plate with the `Universal Accessibility Symbol` and Upper case Sans Serif words of height 15mm engraved on it along with the equivalent word/ s written in Hindi using Devanagari script of height 15mm in white color. Grade 2/ Grade 1 Braille to be etched/ engraved and be raised 0.5mm above base plate. The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed complete as per design / specifications and guidelines as per the entire satisfaction of the Engineer-in-charge (NS)

Providing and fixing acrylic multilingual Braille (raised dots) DIRECTIONAL SIGNBOARDS of size 6` x 9` designed as per accessibility standards and having 3mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devanagari non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate and having a non-glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL complete as per design / specifications and guidelines as per the entire satisfaction of the Engineer-in-charge (NS)

Providing and fixing acrylic multilingual Braille (raised dots) signboards (DOOR SIGN BOARDS) of size 6`x 9` /12” x 5”for room titles, designed as per the drawings issued and having 3mm thick blue acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devanagari non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. Each signboard to be fixed as per manufacturers specifications on the wall adjoining the respective room door at a height of 1200mm from FFL complete as per design / specifications and guidelines as per the entire satisfaction of the Engineer-in-charge (NS)

Providing and fixing of SS, non-glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2mm thick SS non glare base plate and Grade 2/ Grade 1 Braille (raised dots)to be etched/ engraved and be raised 0.5mm above base plate and Upper Case San Serif words and Universal Accessibility Symbol to be etched/ engraved and signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per accessibility standards complete as per design / specifications and guidelines as per the entire satisfaction of the Engineer-in-charge (NS)

Providing and fixing of high intensity reflective conspicuity tape 25 to 50mm width, on edges of treads in staircase including, cutting, pasting etc. of make 3M or equivalent brand complete in all respect to the entire satisfaction of Engineer-in-charge (NS)

Providing and fixing 50mm wide colour contrast `EDGE STRIPS` self addhesive on treads of stair cases to help people with visual diabilities and elederly even in dim light condition complete in all respect to the entire satisfaction of Engineer-in-charge (NS)

Providing and fixing acrylic Braille indicators for handrails of the approved design and make having Braille dots raised above base plate, to be installed at the specified locations as per the directions of the engineer in charge complete as per design / specifications and guidelines as per the entire satisfaction of the Engineer-in-charge (NS)

Providing and Fixing of Pictorial layout plan of size 900mm x 600mm as approved design, made of 3mm thick acrylic non glare base plate and non glare cut out symbols with grade One Braille on which individual facility points, like inquiry, reception, restrooms, medical room / first aid, cafeteria or breakout area, lounge, meeting room, conference room etc. present the respective floors with pictograph wherever needed all in tactile raised by minimum of 1 to 2mm in various colours to make it legible for seniors, partial vision impaired etc. All the facility names should be in Braille, along with English or Hindi. The entire block of tactile signs should be mounted on wall or on a slant/inclined frame for easy reading. The map to be installed at specified locations and installed at a height of 800mm from ground level complete in all respect as per Harmonized guideline and satisfaction of Engineer in charges.

Providing and fixing `U` shaped `Flip Bar` 650mm long and 30mm-40mm thick diameter of 18-gauge with hinge made up of `stainless steel` of International Standard in the toilets to make them `Unisex Toilet` for visually impaired visitors as per design / specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge (NS)

Providing and fixing `L` shaped `Grab Bar` 600mm long and 30mm-40mm thick diameter of 18-gauge made up of `stainless steel` of International Standard in the toilets to make them `Unisex Toilet` for visually impaired visitors as per design / specification and guidelines complete in all respect to the entire satisfaction of Engineer-in-charge (NS)

Providing and fixing retro-reflective information SIGNAGES to provide clear information about the the building/institute in English/Hindi languages clearly visible, readable, understandable , with Type XI Retro-Reflective Sheeting as per ASTM standard and appropriate level,made of 3mm thick ACP sheet with border of 50mm dia round pipe and supported with 200mm dia round fixed in the gate pillers properly designed M-20 grade cement concrete completein all respect as per design/specificaitons and guidelines as per the entire satisfaction of the the Engineer-in-charge (NS) (Size 6 Mtr. X 1.22 Mtr.)

Providing and fixing SS railing (304 bGrade) with circular handrail of dia 35-45 mm at two levels i.e. 700 mm and 900 mm respetively, should extend 300mm and 450 mm after the stair ramp runs in staircase (NS)

Toilet alarm system

Poviding and fixing Single Towel Rail ( Make Jaquar FLR 5374N) or its equivalent complete in all respect 300mm long. complete in all respect as per Directions of Engineer-in-Charge.

Providing and fixing Soap Dish (Make Jaquar AQN 7731) or its equivalent complete in all respect as per Directions of Engineer-in-Charge.

Providing and fixing Paper Holder with flap Recessed Type (Stainless Steel) (Make jaquar AHS 1553) or its equivalent complete in all respect as per Directions of Engineer-in-Charge.

Providing and fixing CP Brass stop cock concealed of standard design and of approved make of Jaquar KUB-35083F or its equivalent. complete in all respect as per Directions of Engineer-in-Charge.

Providing and fixing CP Brass angle valve of approved quality Jaquar code CHR-059KN or its equivalent. complete in all respect as per Directions of Engineer-in-Charge.

Providing and fixing C.P brass bib cock Jaquar make OPL- 15037 or its equivalent. complete in all respect as per Directions of Engineer-in-Charge.

Providing and fixing CP brass health Feccet of Jaquar make cat 573 or its equivalent complete in all respect as per Directions of Engineer-in-Charge.

Providing and fixing CP jali with frame heavy quality complete in all respect as per Directions of Engineer-in-Charge.

Providing, laying and jointing specials with required rubber seal and solvent of PVC/SWR pipe class (type B) and ISI marked i/c filling joint solvent mixture complete in all respect. ) complete in all respect as per Directions of Engineer-in-Charge. a)110mm dia Cowel

Providing, laying and jointing specials with required rubber seal and solvent of PVC/SWR pipe class (type B) and ISI marked i/c filling joint solvent mixture complete in all respect. ) complete in all respect as per Directions of Engineer-in-Charge. a)110mm dia Plain Bend

Providing, laying and jointing specials with required rubber seal and solvent of PVC/SWR pipe class (type B) and ISI marked i/c filling joint solvent mixture complete in all respect. ) complete in all respect as per Directions of Engineer-in-Charge. Cowel Collar

Providing, laying and jointing specials with required rubber seal and solvent of PVC/SWR pipe class (type B) and ISI marked i/c filling joint solvent mixture complete in all respect. ) complete in all respect as per Directions of Engineer-in-Charge. a)110mm dia Socket

Providing, laying and jointing specials with required rubber seal and solvent of PVC/SWR pipe class (type B) and ISI marked i/c filling joint solvent mixture complete in all respect. ) complete in all respect as per Directions of Engineer-in-Charge. a)110mm dia P -Trap

Providing, laying and jointing specials with required rubber seal and solvent of PVC/SWR pipe class (type B) and ISI marked i/c filling joint solvent mixture complete in all respect. ) complete in all respect as per Directions of Engineer-in-Charge. b) 90mm dia iv)Floor Trap

Providing, laying and jointing specials with required rubber seal and solvent of PVC/SWR pipe class (type B) and ISI marked i/c filling joint solvent mixture complete in all respect. ) complete in all respect as per Directions of Engineer-in-Charge. b) 90mm dia vi) Socket

P/F G.I hook complete in all respect as per Directions of Engineer-in-Charge.

Supply of UTP Cat 6 cable in existing pipe/channel complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- Molex/RandM/Semon .

Supply of UTP cat 6 information outlet( RED - for Data - User End) complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- Molex/RandM/Semon .

Supply of UTP Face plate(Single/dual) complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- Molex/RandM/Semon .

`Supply of UTP cat 6 Mounting Patch Cords Low smoke zero helogene (LSZH/LS0H )complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- Molex/RandM/Semon`

`Supply of UTP cat 6 Mounting Patch Cords Low smoke zero helogene (LSZH/LS0H )complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- Molex/RandM/Semon` 7 FT lenth

Supply of UTP cat 6 24 port jack pannel complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- Molex/RandM/Semon

`Supply of Edge Switch 24 Port 10/100/1000 plus 4 SFP Layer 2 manageble Base T Manageble auto sense, Ethernet switch complete in all respect up to the entire satisfaction of Engineer-in charge of work . Make:CISCO C 9200 -24 -4G-E/Allied X 230-28 GT/Juiper EX2300-24 GT`

Supply of 12 U rack with cable manager,fan tray,power distribution kit complete in all respect.Make: Comrack/Netrack/Wallrack

Supply of 1 KVA off line UPS with 3 nos 17 AH 12V along with batteries stand comple in all respect. Make:-APC/Numeric/Microtek

Supply of 25 mm PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material requiredto complete the job in all respect to the entiresatisfaction of Engineer-in-Charge of work.

Supply of 32 mm PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material requiredto complete the job in all respect to the entiresatisfaction of Engineer-in-Charge of work.

Supply of MK Channel NCT 1050 ( 100mm x 50mm )

Supply of Digital Hybrid IP-PBX System configured for 04 Analog Trunk Connectivity, 08 Digital Extensions, 76 Analog Extensions. It should be possible to reach the capacity of system to 240 ports and 999 IP users without any add-on CPU or chassis/hardware platform. System should have two Gigabit Ethernet ports for LAN and WAN to separate out local and VoIP traffic on external network.It should be suitable for DTMF as well as the FSK type of telephone instruments. It should have built-in multi-party conferencing without any software licensing. It should be possible to carry out 15 conferences of 3- participants at a time. The system shall have built-in web based software programming tool for system administration. The call ringing sequence would be programmable and have options such as simultaneous, hunting off, round robin and delayed simultaneous.The system shall support flexible numbering for extensions such as it may have extensions with 1 digit, 2 digits and up to 6 digits numbers as well as in combination of all.The system should have built-in outgoing Call Log buffer of 6000 calls, incoming call log buffer of 5000 and call log buffer of 1000 internal calls. Operator features shall have the assistance to extension, attended call transfer, call intercept, indication of call waiting, night service control etc. should be available by default. Make : Avaya/Alcatel/Matrix

Supply of Operator Console :Supply of Digital DSS having 32 Direct Keys compatible with the PBX and its console.With option to add multiple DSS with the console. Phone Features Message wait Lamp, Ringer Lamp. Make : Avaya/Unify/Matrix

`Supply of s Digital Phonee with large Backlit Display of 240x60 Pixels Graphic LCD, 4 Context Sensitive Keys,Built-in 16 DSS Keys,High Quality Full Duplex Speaker Phone Features Call Forward,Waiting,Transfer,Hold,Conference,Redial, Ringer Lamp.Must have storage for minimum 20 calls per call log in the console itself.Make : Avaya/Unify/Matrix`

Supply of Push Button Telephone Desktop model CLI, flash , redial ,mic with speaker complete in all respect. Make :-Beetel M 71

Supply of IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilitis 50 Pair

Supply of IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilitis 20 Pair

Supply of UTP Cat 6 cable in existing pipe/channel complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- Molex/RandM/Semon ..........

Supply of 20 Pair multicore Telephone cable conductor size 0.51mm bright annealed copper conductor PVC insulated and shealed in existing pipe / Channel etc. (excluding the cost and laying of pipe / channel) and making necessary connection complete in all respect . Make:- Delton / Shalimar / Polycap/Phenolex.

Supply of Cat 6 Information outlet Make:- RandM/Molex/D Link

Supply of cat 6 Face Plate Make:-RandM/Molex/D Link

Supply of 2 KVA on line UPS with 6 nos 26 AH 12V along with batteries stand comple in all respect. Make:-APC/Emerson /Microtek

`Supply of 25 mm dia PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. Make Diplast/Polyplast`

Supply of Dome Camera lmage device/ Sensor - 1/3` Progressive Scan CCD / Progressive Scan CMOS or Better Resolution - 2 Megapixel (1920 x 1080) or better Frame rate Up to 30 fps or better Lens Type - 3.5 to 9 mm auto varifocal lens Motorized IR Light and Distance - Ir Range upto 30 mtrs or better Signal to Noise Raio - )50db Minimum lllumination - 0.3Lx Color: lR LED ON 0 .0 Lux or better Day Night - Auto Day/Night with switchable IR cut filter Video Compression - H.265,H.264,M-JPEG Camera should have Multiple Streaming- Min. Triple Edge Based Analytics Tracking, line crossing detection ,Enter/leave Field, stationary / moved object ,Loitering, crowd density,follow route(All Analytics to be included in cost) Storage - SD Card slot should be expandable up to 128 GB System Compatibitity - ONVlF Profite SandG Privacy Masking - Minimum 4 Privacy zones or higher Protocols - lPv4/lPv6, HTTP, HTTPS, TCP/lP, UDP, UPnP, ICMP, RTSP,RTP, SMTP, NTP, DHCP, DNS, DDNS Additional Features Noise Reduction - Digitat Noise Reduction on/off. WDR -120dB WDR Atarm Input/Output - 1 Alarm Input, 1 ALarm OutPut Audio Input/Output - 1 audio input/1 audio outPut Environment Operating Environment – lndoor/ Outdoor Operating Temperature -0C to 50 c Intelligent Defog automatically adjusts parameters for best picture in foggy or misty scenes lngress protection and vandaI resident standards - lP66 or better and IK10 or better Certificates: UL, FCC, EN

Supply of Bullet Camera lmage device/ Sensor - 1/3` Progressive Scan CCD / Progressive Scan CMOS or Better Resolution - 2 Megapixel (1920 x 1080) or better Frame rate Up to 30 fps or better Lens Type - 3.5 to 9 mm auto varifocal lens Motorized IR Light and Distance - Ir Range upto 30 mtrs or better Signal to Noise Raio - )50db Minimum lllumination - 0.3Lx Color: lR LED ON 0 .0 Lux or better Day Night - Auto Day/Night with switchable IR cut filter Video Compression - H.265,H.264,M-JPEG Camera should have Multiple Streaming- Min. Triple Edge Based Analytics Tracking, line crossing detection ,Enter/leave Field, stationary / moved object ,Loitering, crowd density,follow route(All Analytics to be included in cost) Storage - SD Card slot should be expandable up to 128 GB System Compatibitity - ONVlF Profite SandG Privacy Masking - Minimum 4 Privacy zones or higher Protocols - lPv4/lPv6, HTTP, HTTPS, TCP/lP, UDP, UPnP, ICMP, RTSP,RTP, SMTP, NTP, DHCP, DNS, DDNS Additional Features Noise Reduction - Digitat Noise Reduction on/off. WDR -120dB WDR Atarm Input/Output - 1 Alarm Input, 1 ALarm OutPut Audio Input/Output - 1 audio input/1 audio outPut Environment Operating Environment – lndoor/ Outdoor Operating Temperature -0C to 50 c Intelligent Defog automatically adjusts parameters for best picture in foggy or misty scenes lngress protection and vandaI resident standards - lP66 or better and IK10 or better Certificates: UL, FCC, EN Approved Make: Axis / Bosch /Pelco

Supply of IP IR PTZ Dome Camera PoE Enabled (High Definition). lmage device/Sensor - 1/3` Progressive Scan CCD/ Progressive scan CMOS or better. Resotution - 2 Megapixel, 1080p (1920x1080).Optical Zoom 30X and Digital Zoom: 12X. lR Light and Distance - lR range up to 180 Mtrs. Video Compression - H.265 MJPEG Triple Stream encoding. Edge Based Analytics Tracking, line crossing detection ,Enter/leave Field, stationary / moved object ,Loitering, crowd density,follow route. lngress protection lP66. Certificates: UL, FCC, EN Make : Bosch / Avigilion/ AXIS

`Supply of 32Ch Network video recorder Processor Intel® Core™ i3-10100E Processor base frequency 3.20 GHz, Cache 6 MB Intel® Smart Cache, Installed memory 8GB DDR4-2666 1RX8 LP SODIMM, Memory protection ECC unbuffered, Operating system Microsoft Windows Server IoT 2022 for Storage Workgroup, System drive 256 GB M.2 SSD, Processor graphics Intel® UHD Graphics 630 (three, digital outputs: 1 DisplayPort port 2 HDMI ports), Maximum internal hard drives 2, 36 TB (2 x 18 TB) storage capacity, HDD rotation speed (rpm) 7200 rpm, Number of USB ports 6, Front: 2 USB 2.0 ports, Rear: 4 USB 3.2 Gen2 ports, Number of Ethernet ports 2 RJ45 Gigabit Ethernet LAN ports (teamed) Number of video outputs 3 • 2 x DisplayPort 1.2 (DP plus plus ), 4K@60 Hz • 1 x DVI-D, 1920x1080@60Hz Multi-display support Maximum of 3 displays of up to 4K@30Hz resolution per display (DisplayPort) and 1920x1080@60Hz (DVI D), Maximum IP camera channels 64, Efficiency of power supply (%) 92%, Maximum heat loss (BTU/h) 901 BTU/h, Power factor 0.96. Make : Bosch / Avigilion/ AXIS`

Supply of 6 tb Hard disk. Make Seagate/ WD

Supply of 65` 4K UHD (3840x2160) Ready resolution Built in Android OS LED display with built in 2.4 Ghz Wi-Fi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wi-Fi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, Built-in Bluetooth Ver.4, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 ,Offered Product should be MII(Make in India) Complied, Built in Chrome cast, In- built Capability to run Digital Signage Software of Same OEM, 24x7. Make: Panasonic /Samsung /LG

`Supply of 24-port 1/10G Base-X/T Layer-3 Stackable Managed Switch. 24 # 1/10G Base-X Fiber SFP plus Ports, 2 # 1/10G Base-T Copper Ports, Ethernet: Out-of-band 1G port (Front), Console: RJ45 RS232 (Front), Storage: USB (Front), Half-width 1-unit 1U rack mount. CPU: 800 MHz, RAM: 1 GB, Packet buffer memory: 32 MB, Flash: 256 MB. Stack height: 8 switches, Switching fabric: 480 Gbps Line-Rate (non blocking fabric), Throughput: 357 Mpps, Forwarding mode: Store-and-forward, Address database size: 16,000 MAC addresses (48-bit MAC address), Number of VLANs: 4,093 (IEEE 802.1Q) simultaneously, Number of multicast groups= 2K IPv4, Number of multicast groups= 2K IPv6, ARP/NDP= 2K, Number of LAGs (802.3ad): 128 LAGs with up to 8 ports per group, Number of hardware queues for QoS: 8 (Standalone), Number of routes: 512 IPv4 Unicast routes, Number of routes: 256 IPv6 Unicast routes, Jumbo frame support: up to 9K packet size, Mean time between failures (MTBF): 196,120 hours (~22.4 years), sFlow=416 samplers, 416 pollers, 8 receivers. Protocol based VLAN, IP Subnet, IPX, ARP, Subnet based VLAN, MAC based VLAN, Voice VLAN, Private Edge VLAN, Private VLAN, Guest VLAN, Double VLAN Tagging (QoQ), GARP with GVRP/GMRP, MVR (Multicast VLAN Registration), Multiple Registration Protocol (MRP), Multicast VLAN Registration Protocol (MVRP), LAG Hashing, LAG Member Port Flaps Tracking, UDLD support, Distributed Link Aggregation, Storm Control, Link Dependency, Spanning Tree Protocol, Per VLAN STP (PVSTP) with FastUplink and FastBackbone, Per VLAN Rapid STP (PVRSTP), STP Loop Guard, STP Root Guard, BPDU Guard, STP BPDU Filtering, STP BPDU Flooding, IGMP v2/v3 Snooping support, MLD v1/v2 Snooping support, Expedited Leave Function, Static L2 Multicast Filtering, MLDv1/2 Snooping Support, IGMPv2/3 Snooping Support, IGMP Proxy, MMLD Proxy, Any Source Multicast (ASM), Source Specific Multicast (SSM), Multicast streams routing between subnets, VLANs, Multicast Static Routes (IPv4, IPv6), DVMRP, Neighbor discovery (IPv4, IPv6), PIM-DM (IPv4, IPv6), PIM-SM (IP`Supply of L2 switch with 8 # 10/100/1000 Mbps Base-T auto-sensing PoE plus (75W) ports. 2 # 1000 Base-X SFP uplink ports. Desktop, Wall-mount and 19-inch Rackmountable. Internal Power Supply. CPU:400 MHz Cortex-A9 Single Core. 512MB RAM. 16MB SPI plus 256MB NAND FLASH. Fan Less. Network Protocol and Standards, IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-X, IEEE 802.3x full- duplex flow control, IEEE 802.3af, IEEE 802.3at (Power over Ethernet Plus), IEEE 802.3ad Link Aggregation (manual or LACP), IEEE 802.1D Spanning Tree Protocol (STP), IEEE 802.1w Rapid Spanning Tree Protocol (RSTP), IEEE 802.1s Multiple Spanning Trees Protocol (MSTP), IEEE 802.1ab Link Layer Discovery Protocol (LLDP), IEEE 802.1p Class of Service (CoS), IEEE 802.1Q static VLAN, IEEE 802.1x. Performance, Forwarding modes: Store-and- forward, Bandwidth: 20 Gbps full duplex, Buffer memory: 1.5 MB , Address database size: 16k media access control (MAC), Mean time between failures (MTBF): 913,368 hours. IEEE 802.1Q static VLAN (64 groups, static), Multicast groups : 512, Number of IPv4 static routes: 32, Number of IPv6 static routes: 32, Port-based QoS, Number of VLANs: 256, Number of ARP cache entries:479 ARP / 223 NDP, Number of DHCP snooping bindings: 8K, Access Control Lists (ACLs): 100 shared for MAC, IP and IPv6 ACLs, Packet forwarding rate 64 Bytes: 14.88 Mpps, DSCP-based QoS, Jumbo frame support: Upto 9k, Acoustic noise level @ 25°C: 0 dBA, DiffServ, LLDP-MED, SNMP v1, v2c, v3, RFC 1213 MIB II, RFC 1643 Ethernet Interface MIB, RFC 1493 Bridge MIB, RMON group 1, 2, 3, 9, RFC 2131 DHCP client, Voice VLAN, Auto-VOIP, DHCP Filtering, Auto denial-of-service (DoS) protection, HTTP and HTTPS, Power saving when link down, IEEE 802.1x with Guest VLAN, IEEE 802.1Q VLAN tagging, Port-based security by locked MAC addresses, MAC and IP-based ACL, Storm control for broadcast, multicast and unknown unicast packets, Block unknown multicast, ICMP Router Discovery Protocol (IRDP), Number of IP VLAN interfaces (routed VLANs): 15, Layer 2 DHCP Relay, IGMP snooping v1/v2/v3, Protected Port, Port-based ingress and egress rate limiting, Weighted Round Robin (WRR), Strict priority queue technology, SNTP client over UDP port 123, Port mirroring support (many-to-one), Web- based configuration, Smart Control Center (SCC) for multi-switch management, Dual software (firmware) image, Password access control, TACACS plus and RADIUS support, TLS Web-based access (version): V1.0, Syslog, DHCP snooping, Firmware upgradeable. Power, PoE budget: PoE plus (75W), Max Power consumption: 101 W, Heat Dissipation: 344.81 BTU/hr, 100-240VAC/50-60-Hz universal input. Certifications, CE EN 55022, EN 61000 and EN 55024, CE mark, commercial, FCC Part 15 Class A, VCCI Class A, Class A EN 55022 (CISPR 22) Class A, C-Tick, UL/cUL 60950-1, CE EN 60950-1, 47 CFR FCC Part 15, SubpartB, Class A, ICES-003: 2016 Issue 6, Class A, ANSI C63.4:2014, CCC, IEC 60950-1:2005 (ed.2) plus A1:2009 plus A2:2013, AN/NZS CISPR 22:2009 plus A1:2010 CLASS A, CB, KCC. Status LEDs, Per port: Link/activity, speed, Per device: Power, Fan, PoE Max, Per PoE port: PoE Power, PoE fault. Make: Cisco/Netgear/Alcatel`

Supply of Single mode SFP-1000-T Base for Fiber connectivity of Same make quoted for switch.

Supply of optical fiber patch leads shall comprise of Single mode with outer jacket metal spiral sheath protection. Connector: Zirconia ceramic ferrule,Conector type Duplex LC-LC with for SFP connectivity. Make: Panduit/ RandM/ Systimax/ Beldon

Supply of 24-port 19` 1 U jack panel which Should Be made of sheet steel 1.5 mm, Should be 19` 1U straight Patch Panel, 24-port, Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks which should be toolless termination. Should have rear cable management shelf metallic powder coated. Make: RandM,Siemon,Systimax

Supply of CAT6 UTP 24 AWG Patch Cord - 1 mtr with cross separator , Manufactured from stranded wires for longer flex-life , Minimum length of 1m, and maximum length of 5m onforming to the following standards like EN 50173, ISO/IEC 60603-7 and 11801/IEC 60332- 1, UL VW-1 Make RandM/Siemon/Systimax

Supply of 22U Equipment Rack with provision for housing all control equipment with front and rear door, Blower for cooling and proper locking arrangements and as per the specifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Makes: Valrack /Netrack/ Comrack

Supply of 9U wall mount rack with 500 depth. Rack have loaded accessories like FAN with 5 socket PDU with PVC cable manager-1nos and mounting hardware. Rack should be UL certified. Make: Valrack/ Netrack/ Rittal

Supply of 6 Port fiber LIU, Fully loaded which have sufficient slots to accommodate 24/12 Duplex LC/SC Ports ,Should have fiber management provision inside with splice tray and other accessories, Should be rack mountable 1U,Should have Splice holder for minimum 12 Fiber cores ,Should be made of Cold Rolled Steel ,Material Should steel: 1.5 mm with powder-coated. LIU should have rack mount with channel with uppersheet openable for fiber management. Make: RandM /Siemon/Systimax

Supply of 12 Port fiber LIU, Fully loaded which have sufficient slots to accommodate 24/12 Duplex LC/SC Ports ,Should have fiber management provision inside with splice tray and other accessories, Should be rack mountable 1U,Should have Splice holder for minimum 24 Fiber cores ,Should be made of Cold Rolled Steel ,Material Should steel: 1.5 mm with powder-coated. LIU should have rack mount with channel with uppersheet openable for fiber management Make: RandM / Siemon/ Systimax

Supply of OFC Armoured, loose tube, Gel filled, rodent resistant, direct burial type. Consisting of Single Mode 12-core fibres of Corrugated steel tape armor. Make: - RandM/ Norden/ Panduit

Supply and installation of 25 mm dia. Ball valve with fitting

Providing and Fixing of Pressure switch with fitting

Providing and Fixing of Pressure Gauge with fitting

FOUNDATION OF MASNORY CHAMBER WITH MATERIAL AND LABOUR COMPLETE FOR TANK

Supply and installation of ABC type fire extinguisher cap. 4 Kg. ISI mark Make Atasee/Life Safety

Supply and installation of CO2 type fire extinguisher cap. 4.5 Kg. ISI mark Make Atasee/Life Safety

Supply, Carriage, erection, testing and commissioning of LED fitting with integral / non-integral driver. The lumen output of LED should be minimum 100 lumens per watt and should be type tested from Government / NABL / UL accredited laboratory for LM79 and LM80 test reports and copy of same has to be submitted to the client department. The Fixture supplied with Electronic high efficiecy driver having Power factor )0.9, THD (10%. The sample of fitting can be got tested in the presence of representative of the department from NABL I UL accredited laboratory. The job includes cost of all material and erection of fitting with all accessories including anchor fasteners and connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge. 40W LED High efficiency aluminium profile linear batten with polycarbonate diffuser for enhanced productivity. Ingress protection IP40 (Wipro Make Cat.No.LL24-541-XXX-57-XX / Philips make Cat.No. BN170C LED40S-6500 PSU L120 GR / Havells make DURABS40WLED865SPCSS or as approved in the department).

Supply, Carriage, erection, testing and commissioning of LED fitting with integral / non-integral driver. The lumen output of LED should be minimum 100 lumens per watt and should be type tested from Government / NABL / UL accredited laboratory for LM79 and LM80 test reports and copy of same has to be submitted to the client department. The Fixture supplied with Electronic high efficiecy driver having Power factor )0.9, THD (10%. The sample of fitting can be got tested in the presence of representative of the department from NABL I UL accredited laboratory. The job includes cost of all material and erection of fitting with all accessories including anchor fasteners and connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge. 10W LED High efficiency aluminium profile linear batten 2 feet long with polycarbonate diffuser for enhanced productivity. Ingress protection IP40 (Wipro Make Cat.No.LL20-111-XXX-65NE3 / Philips make BN 021 LED12S 6500 PSU GR / Havells make LUMILINE plus BS10WLED865SPCSS or as approved in the department).

Supply, Carriage, erection, testing and commissioning of LED fitting with integral / non-integral driver. The lumen output of LED should be minimum 100 lumens per watt and should be type tested from Government / NABL / UL accredited laboratory for LM79 and LM80 test reports and copy of same has to be submitted to the client department. The Fixture supplied with Electronic high efficiecy driver having Power factor )0.9, THD (10%. The sample of fitting can be got tested in the presence of representative of the department from NABL I UL accredited laboratory. The job includes cost of all material and erection of fitting with all accessories including anchor fasteners and connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge. 10W LED Bulk Head Fitting Wipro make LW07-141-XXX-57-G1 / Philips make WT202W LED66 NW PSU S2 PC / Havells make HEXAFT10WLED857SSYMBOPC or as approved in the department).

Supply, Carriage, erection, testing and commissioning of LED fitting with integral / non-integral driver. The lumen output of LED should be minimum 100 lumens per watt and should be type tested from Government / NABL / UL accredited laboratory for LM79 and LM80 test reports and copy of same has to be submitted to the client department. The Fixture supplied with Electronic high efficiecy driver having Power factor )0.9, THD (10%. The sample of fitting can be got tested in the presence of representative of the department from NABL I UL accredited laboratory. The job includes cost of all material and erection of fitting with all accessories including anchor fasteners and connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge. LED fixture 2`x2` surface Mounted with PMMA diffuser with having minimum system lumen efficacy of 110 lm/W with CRCA Housing with P.F.)0.95,THD(10%,CCT 5700 K ,CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70. Wipro make CRCO10S038HP57GL1 / Philips make RC380B LED36S-6500 G5 L60W60 PSU OD SG / Havell`s make PLANOSUR2X2PLS36WLED857S0720 or its equivalent make.

Supply, Carriage, erection, testing and commissioning of LED fitting with integral / non-integral driver. The lumen output of LED should be minimum 100 lumens per watt and should be type tested from Government / NABL / UL accredited laboratory for LM79 and LM80 test reports and copy of same has to be submitted to the client department. The Fixture supplied with Electronic high efficiecy driver having Power factor )0.9, THD (10%. The sample of fitting can be got tested in the presence of representative of the department from NABL I UL accredited laboratory. The job includes cost of all material and erection of fitting with all accessories including anchor fasteners and connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge. 18W LED Downlighter Surface mounted round shaped Wipro make LD80-171-xx-60-SM / Philips make SM251C LED20S- 6500 PSU WH / Havell`s make ENDURANEOHESURFACEDLS18WLED857S or its equivalent.

Supply, Carriage, erection, testing and commissioning of LED fitting with integral / non-integral driver. The lumen output of LED should be minimum 100 lumens per watt and should be type tested from Government / NABL / UL accredited laboratory for LM79 and LM80 test reports and copy of same has to be submitted to the client department. The Fixture supplied with Electronic high efficiecy driver having Power factor )0.9, THD (10%. The sample of fitting can be got tested from NABL I UL accredited laboratory by the department. The job includes cost of all material and erection of fitting in grid false ceiling / gypsum after cutting the false ceiling as required including giving support of chain from ceiling or frame including connection to the nearest light point with copper wires and petty material required to fix the fitting properly. The work should be completed as per satisfaction of Engineer-in-charge. 18W LED Downlighter Recess mounted round shaped Wipro make LD90-231-XXX-65-XX*** / Philips make DN296B LED15S-6500 PSU WH / Havells make INTEGRANEODLR18WLED857S or its equivalent.

Supply, Carriage, erection, testing and commissioning of LED fitting with integral / non-integral driver. The lumen output of LED should be minimum 100 lumens per watt and should be type tested from Government / NABL / UL accredited laboratory for LM79 and LM80 test reports and copy of same has to be submitted to the client department. The Fixture supplied with Electronic high efficiecy driver having Power factor )0.9, THD (10%. The sample of fitting can be got tested from NABL I UL accredited laboratory by the department. The job includes cost of all material and erection of fitting in grid false ceiling / gypsum after cutting the false ceiling as required including giving support of chain from ceiling or frame including connection to the nearest light point with copper wires and petty material required to fix the fitting properly. The work should be completed as per satisfaction of Engineer-in-charge. `6W LED Downlighter Recess mounted round shaped Wipro make LDB0-350-XXX -60-XX** / Philips make DN296B LED6S-6500 PSU WH / Havells make INTEGRANXTDLR9WLED857S or its equivalent.`

Supply, Carriage, erection, testing and commissioning of LED fitting with integral / non-integral driver. The lumen output of LED should be minimum 100 lumens per watt and should be type tested from Government / NABL / UL accredited laboratory for LM79 and LM80 test reports and copy of same has to be submitted to the client department. The Fixture supplied with Electronic high efficiecy driver having Power factor )0.9, THD (10%. The sample of fitting can be got tested from NABL I UL accredited laboratory by the department. The job includes cost of all material and erection of fitting in grid false ceiling / gypsum after cutting the false ceiling as required including giving support of chain from ceiling or frame including connection to the nearest light point with copper wires and petty material required to fix the fitting properly. The work should be completed as per satisfaction of Engineer-in-charge. Supply, carriage, erection, testing and commissioning of LED strip light of wattage 15Watt per meter in existing cove of false ceiling complete with cost of driver (1 driver per five meter strip) and other accessories for indoor use of required length as per the site. (Wipro make Strip (LS06-015-120-30-50) and driver (LG40-078) / Havells make Strip (FLEXISTRIP5MIP2024V/2ALED865MOD V1) Driver (CVDRIVER24V2A) or its equivalent of Phillips / GE make (5mtr spool)).

Supply, Carriage, Erection, Testing and Commissioning of Fresh air fan 250mm complete with guard. The fresh fan is to be fixed in ventilator.The job includes connection from nearest light point with PVC Cu wire including cost of all material (ISI Marked) (Havell`s make Fresh Air fan 250mm sweep (Ventil Air-DX / DX-HS) / Orient make Ventilator Fan (PB) Black 250mm or Crompton / Usha or as approved in the department.

Supply, Carriage, Erection, Testing and Commissioning of wall fan 16` sweep (400mm) Oscillating type complete with built-in regulator. The fan is to fixed on wall with suitable fixing arrangement including connection from nearest 3pin 6A socket with cost of Cu wire and 5A plug top required as per satisfaction of Engineer-in-charge. The job includes cost of all petty material required at site. Havell`s make (D’zire) / Orient 44 Azure Blue or white /Crompton make WMCressida (Light Grey) or as approved in the Haryana Police Corporation.

Supply and erection of PVC insulated copper multistrand flexible wire 1100V grade in existing PVC conduit etc. as required. (Havell`s / Polycab / KEI or its equivalent make). 4 wires of 10sqmm single core for 3 phase and neutral and 2 Nos. wires of 4sqmm single core for earths from meter panel to house DB.

Supply and erection of PVC insulated copper multistrand flexible wire 1100V grade in existing PVC conduit etc. as required. (Havell`s / Polycab / KEI or its equivalent make). 4 wires of 6sqmm single core for 3 phase and neutral and 2 Nos. wires of 4sqmm single core for earths from meter panel to house DB.

Supply, carriage and laying of aluminium armoured / unarmoured under ground cable loose in existing pipe or trenches or cable trays complete with necessary connections. The cable shall be 1100V grade ISI marked as per following sizes. The scope includes supply and laying the cable with cost of all petty material to the satisfaction of engineer-in-charge. The Cable should be of either make Havells / Polycab / KEI / RR Kabel make or its equivalent. 6 sq mm 3 Core cable Unarm

Supply, fabrication, carriage, erection, testing and commissioning of cubical type wall mounted panel compartmentalized made out of 16G/18G CRCA sheet with main compartments of 16G and internal of 18G duly powder coated having seperate lockable compartments for Incomer MCCB / 3 Phase energy meters and MCB 4P / 1 Phase energy meter and MCB DP complete with all internal wiring with PVC copper wire. The panel shall have required din bars for fixing MCBs, glass / acrylic cover approximate 4`x4` on front side for meter compartment, aluminium TPN busbar with all required accessories, gaskets, nut-bolts sleave and required knock-outs for Incoming and Outgoing wires and cable alley. The panel is to be fixed at site on existing wall / frame as required at site complete to the satisfaction of Engineer-in-charge and as per Indian Electricity rules. Meter Panel (Approximate size 1.01m x 1.10m with 0.25m depth) Incoming Space for Incomer 100A 4P = 1 No. S/E of AL busbar TPN 150A with heat shrink sleave. Space for 1 set of 3 RYB LED indicator Lamps. Outgoing Space for 3Phase energy meter with MCB TPN in one enclosure = 4 Nos.

Supply, fabrication, carriage, erection, testing and commissioning of cubical type wall mounted panel compartmentalized made out of 16G/18G CRCA sheet with main compartments of 16G and internal of 18G duly powder coated having seperate lockable compartments for Incomer MCCB / 3 Phase energy meters and MCB 4P / 1 Phase energy meter and MCB DP complete with all internal wiring with PVC copper wire. The panel shall have required din bars for fixing MCBs, glass / acrylic cover approximate 4`x4` on front side for meter compartment, aluminium TPN busbar with all required accessories, gaskets, nut-bolts sleave and required knock-outs for Incoming and Outgoing wires and cable alley. The panel is to be fixed at site on existing wall / frame as required at site complete to the satisfaction of Engineer-in-charge and as per Indian Electricity rules. Space for erection of of MCB 4P 63A = 4 Nos.

Supply, fabrication, carriage, erection, testing and commissioning of cubical type wall mounted panel compartmentalized made out of 16G/18G CRCA sheet with main compartments of 16G and internal of 18G duly powder coated having seperate lockable compartments for Incomer MCCB / 3 Phase energy meters and MCB 4P / 1 Phase energy meter and MCB DP complete with all internal wiring with PVC copper wire. The panel shall have required din bars for fixing MCBs, glass / acrylic cover approximate 4`x4` on front side for meter compartment, aluminium TPN busbar with all required accessories, gaskets, nut-bolts sleave and required knock-outs for Incoming and Outgoing wires and cable alley. The panel is to be fixed at site on existing wall / frame as required at site complete to the satisfaction of Engineer-in-charge and as per Indian Electricity rules. Incoming Space for Incomer 63A 4P = 1 No. S/E of AL busbar TPN 100A with heat shrink sleave. Outgoing Space for erection of MCB 4P 63A = 2 Nos. Space for erection of of MCB SP 6A-32A = 36 Nos.

Supply and erection of GI pipe Bracket made out of 32 mm dia medium class GI pipe, having 15 deg angle from horizontal, suitable for fixing on top of Street Light octagonal pole. GI Pipe bracket Double arm each side 90 cm long, with 30 cm high suitable size pole cap complete with cost of all required petty material and labour. (Based on HSR rates)

Supply, carriage and laying of aluminium armoured under ground cable loose in existing pipe or trenches or cable trays complete with necessary connections. The cable shall be 1100V grade ISI marked as per following sizes. The scope includes supply and laying the cable with cost of all petty material to the satisfaction of engineer-in-charge. The Cable should be of either make Havells / Polycab / KEI / RR Kabel make or its equivalent. 120 sq mm 3 ½ Core cable Arm

Supply, carriage and laying of aluminium armoured under ground cable loose in existing pipe or trenches or cable trays complete with necessary connections. The cable shall be 1100V grade ISI marked as per following sizes. The scope includes supply and laying the cable with cost of all petty material to the satisfaction of engineer-in-charge. The Cable should be of either make Havells / Polycab / KEI / RR Kabel make or its equivalent. 70 sq mm 3 ½ Core cable Arm

Supply, carriage and erection of 150W LED Flood light Luminaire (White) with efficacy of minimum 110 lm/W with LED life of 50000 br hrs with THD(10% and PF)0.9 with die cast aluminium bod. Fixture suitable for Outdoor application with IP66 protection.The fixture has colour temperature of 5700K with precise beam angle of 60 degree. The job is includes cost of fixing the fitting on 12.5m high (high mast) with suitable fixing arrangements, painting of MS part including connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge / Architect. Wipro make LF20-192-060-57-G2 / Phlips make BVP192 LED 145 CW NB FG GR PSU* / Havells make JETAIRISFLS150WLED757P2AV2WBLTG or of approved make of department.

Supply, carriage and erection of 100W LED Flood light Luminaire (White) with efficacy of minimum 110 lm/W with LED life of 50000 br hrs with THD(10% and PF)0.9 with die cast aluminium bod. Fixture suitable for Outdoor application with IP66 protection.The fixture has colour temperature of 5700K with precise beam angle of 60 degree. The job is includes cost of all material and erection of fitting on the parapet wall with cost of MS channel bracket of angle iron 40x5mm with suitable fixing arrangements, painting of MS part including connection to the nearest light point with copper wires. The work should be completed as per satisfaction of Engineer-in-charge / Architect Wipro make LF20-122-060-57-G2 / Phlips make BVP192 LED 100 CW NB FG A1 GR PSU* / Havells make JETAALBAFLOODLIGHT100Wor of approved make of department.

Supply, carriage, erection, testing and commissioning of Decorative 50W Twinkle make with LuxMax- CLIPPER LED Post Top Fixture (LuxMax-PT-168-P) - 50WLED LuxMax-Steel Ribbed Pole ( 4 mtr high) - 105 -81 with Cast alum. Embellishment (EMB-Q1) complete with cost of all accessories, but-bolts and base plate The job includes the cost of erection of MS/GI/Swaged ( excluding Octagonal ) metallic pole of following length in cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required..The work should be completed to the satisfaction of Engineer-in-charge / Architect.

Supply, fabrication, carriage, erection, testing and commissioning of cubical type panel compartmentalized made out of 16G/18G CRCA sheet with compartments of 16G duly powder coated complete with all internal wiring with PVC copper wire. The panel shall have required aluminium TPN busbar with all required accessories, gaskets, nut-bolts sleave. The panel is to be fixed at site on floor as required complete to the satisfaction of Engineer-in-charge and as per Indian Electricity rules. Ground Floor Niche (0.70m x 1.0m x 0.25m thick) Incoming Space for 200A 4P Change Over Switch = 1 No. Space for Incomer 200A MCCB 4P = 1 No. S/E of AL busbar TPN 250A with heat shrink sleave. Space for 1 set of RYB LED indicator Lamp and 1 No. Digital Ammeter and 1 No. Digital Voltmeter Outgoing Space for erection of MCCB 4P 63A = 5 Nos. Space for erection of MCB 4P 63A = 3 Nos.

Supply, installation, testing and commissioning of ISI marked MS pipes to IS:1239 C class including all fittings like anchor fasteners, couplings, bends, elbows, tees including supports etc., welded or screwed joints as required, complete Make: Jindal / Apollo/Surya. 80 MM DIA.

Supply, installation, testing and commissioning of First Aid Fire Hose reel wall mounting swinging type drum with 20 mm dia. x 30 mtr long ISI mark hose bracket of MS construction, spray painted in post office red complete with the following as required Make :- Atasee/ MEC

Supply, installation, testing and commissioning of landing hydrants Valve to type ‘A’ of I.S.:5290_1977 with 63 mm dia. Stainless steel instantaneous type single headed outlet, with blends caps and chain complete with instantaneous spring lock type SS female coupling of 63 mm dia. for connecting hose type. ISI mark Make :- Atasee/ MEC

Supply and installation of 63 mm dia. rubber fabric lined hose with stainless steel male female coupling 15 mtr. Long. ISI mark IS 636 type A Make :- Atasee/ MEC

Supply and installation of stainless steel branch pipe with SS nozzle with 20 mm nominal bore outlet with standard instaneous type 63 mm dia. coupling. ISI mark Make :- Atasee/ MEC

Supply and installation of 100 mm dia. Two Way Fire Brigade Connections Inlet which is connected to Hydrant main pipe line outside the building including all fitting like flange, nut bolt, gasket etc Make:- Atasee/MEC

Supply, installation, testing and commissioning of C.I. Butterfly Valve, wafer type including necessary welded flange, nuts, bolts, gaskets etc., complete Make: Castle, NVR/Kartar 100 MM DIA.

Supply, installation, testing and commissioning of C.I. Butterfly Valve, wafer type including necessary welded flange, nuts, bolts, gaskets etc., complete Make: Castle, NVR/Kartar 80 MM DIA.

Providing and fixing of Non Return Valve, wafer end tupe, including necessary nuts, bolts, washer, welded flanges etc., complete Make : Castle/Kartar 100 MM DIA.

Providing and fixing of 3 x 2.5 sq. mm Cable ISI Mark for connecting motor to panel

Supply and installation of 2 x 1.5 sq. mm PVC unsheathed copper conductor armoured cable ISI Marked, including all material and labour required for installation/ testing etc. Complete in all respect up to the satisfaction of person in charge of work. ISI mark

Supply and installation of low intensity electronic Hooter Speaker with line matching transformer at working voltage of 24v DC for Fire Alarm and including all material and labour required for installation/ testing etc. Complete in all respect up to the satisfaction of person in charge of work. (Make: Agni)

Supply and installation of Main Fire Alarm Control Panel complete with zones and visual indication of fault and fire. Confirming to be 2189-1988 I and approval of TAC. Including 24 volts DC battery for supply and charger. The panel would be of 16SWG sheet steel rust proof and final finishing of paints including all material and labour required for installation/testing etc., complete in all respect up to the satisfaction of person in charge of work. (Make: Agni)

Providing and Fixing of Terrace Motor Pump 5 HP complete with fitting Make:- Crampton, Lubi

Providing and Fixing 6 Levers Double Round Plaza make enter lock etc. complete in all respect as per directions of Engineer-in-charge

Providing and fixing wooden laminate flooring Vista make AC .4 including 2mm foam panni complete in all respect (1270/-)

Providing and fixing wall panelling with 12mm thick green make ply and finish with 4mm thick veener complete in all respect to the entire satifaction of Engineer - in - charge (3059/-)

Amount

Sanjay Kumar, Contractor(GSTN-NA)

Amount

Quoted Percentage