Construction of Kamadenu building at Kilpauk in Chennai city (Re Tender)

Earth work excavation in all soils (including refilling) a) 0 to 2 mt.

Providing Anti-termite treatment including cost of chemicals labour

Filling with Excavated Earth

Supplying and filling stone dust

Supply and laying of Hard core layer 300mm

Supplying and filling with well gravel

Supplying and laying of Rubber moulded hydraulic pressed Paver blocks following thick b) 83mm thick Paver block

Plain cement concrete 1:5:10 for Foundation & Basement

Plain cement concrete 1:2:4 for Foundation & Basement and other similar works

Plain cement concrete 1:4:8 using 40 mm hard broken stone jelly

Providing and laying in position, Standardised Concrete Mix M-30 Grade a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

Providing Rain water harvesting pit by augering 300mm dia bore pits to a depth of 5.50m overall depth Precast slab Standardised Cement concrete M 30 grade a) Providing pit

b) Augering 30cm dia

Prviding Augering 30 cm dia for compound wall (M30)

Providing Rain Water Harvesting well ring circular shape of 90cm dia, 60cm depth,50mm thick using m20 grade concrete including steel fabrication.

Brick work in CM 1:5 using chamber burnt bricks of size 9”x4½”x3” (23x11.4x7.5 cm) a) Foundation and basement

Brick work in Cement Mortar 1:6 using Chamber burnt bricks of size 9”x4½"X3” (23x11.4x7.5cm) for super structure in the following floors b. In Ground Floor/Stilt floor

c. In First Floor

d. In Second Floor

Brick partition wall in Cement Mortar 1:4 114mm thick for super structure in the following floors using chamber burnt bricks of size 9”x4¼”x3” (23x11.4x7.5cm) b. In Ground Floor/Stilt Floor

c. In First Floor

Brick partition wall in Cement Mortar 1:4 75mm thick for super structure in the following floors using Chamber burnt bricks of size 9”x 4½”x 3” (23 x 11.4 x 7.5cm) b) In Ground Floor

c) In First Floor

Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 a) In Ground Floor

b) In First Floor

Flooring with a bed of CC 1:5:10 using 40mm size hard broken stone jelly

Plastering the top of flooring in CM 1:4, 20 mm thick

Finishing the top of flooring with cement concrete 1:3, 20 mm thick Ellispattern Flooring (No Sand)

Weathering Course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand)

Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3

Supplying and fixing of Colour glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm thick

Supplying and fixing of colour Ceramic Tiles Anti skid using Grout (Tile Joint Filler).

Supply and Laying of Ivory Virtified tile Flooring in C.M 1:3 20mm Thick incl. pointing

Supply and laying of superior variety Concrete Designer tiles for flooring in CM 1:3

Supplying and fixing of PVC Trims / Corners beading suitable colour in toilet wall cladding in all floors

Formwork using M.S.Sheet a) For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,"

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

Plastering in C.M. 1:5, 12 mm thick

Plastering in C.M. 1:4, 12 mm thick

Spl. Ceiling plastering in C.M. 1:3, 10 mm thick

Plastering with CM 1:3, 12mm with WPC

Plastering in CM 1:5, 12mm thick for border finish in all floors a) 150 mm wide

b) 75 mm wide

c) 50 mm wide

White washing 3 coats (slaked)

Painting - New "wood work"

Painting - New "iron work"

Providing one coat of Wallputty for new plastered surface

Providing two coats of Plastic Emulsion paint including primer for inner walls

Providing two coats of Exterior Emulsion paint including primer for outer walls

Providing the new wood work with two coats of best melamine polish/varnish of approved quality and brand

Teak wood Wrought & Put up a) T.W. over 2 m & below 3 m

b) T.W. below 2 m length.

Supply and fixing of Magnetic door catches

M.S.Holdfast

Supply & Fixing of WPC Decora Door set where the Door shall be extruded as a single core door with Lead-Free compound and the surface shall have Decora Design i.e, Non-porous Smooth Routing and 3D embossed wooden bark grains on one side.

Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

Supplying and fixing in position of UPVC window of casement type( open) for all sizes

Supplying and fixing of Best Indian Teakwood Panelled door shutters Double leaf with Brass fittings b. 1500 x 2100mm.with Brass fittings (Double leaf)

Supplying and fixing of Single leaf Solid core flush door shutters using boiled water resistance (BWR) teak wood ply as per IS 303-1989 a) Door size 900mm x 2100mm (single Leaf)

b) Door size 1200mm x 2100mm (single Leaf)

M.s Grills

Supplying and laying of 65mm dia GI Pipes a) below GL

Anticorrosive treatment for window grills

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet b) Gear Operated Type (from 8 sqm. to 12 sqm. Area)

Supplying, fabricating and placingof Mild Steel Grills Fe550D (Corrosion resistant reinforcement) of all diameters for reinforcements for all floors

Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works a. Ground floor

b. In First floor

Providing Cuddappah slab of 40mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works a. In Ground floor

b. In First floor

Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe

Supplying and fixing of half turn C.P Long body Tap of 15mm dia of best quality

Supplying and fixing of half turn C.P short body Tap of 15mm dia of best quality

Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of following litres c) 1000 litres

Supplying and fixing of C.I. manhole cover with frame and locking arrangements of approved quality and brand of following size (50 kg) as per standard specifications b) 60 x 60cm (Heavy duty)

Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 b) 25mm dia

Supplying, laying and fixing of 20 mm dia GI Pipe ‘B’ Class of best approved quality for Hot water line fully concealed in walls

Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness (fully consealed in walls) c. 20mm dia PVC water supply ASTM pipe

Drilling of borewell including transportation from one place to another place a) Drilling of borewell in upto 60m

Drilling of borewell of following dia in hard rock area anywhere in Tamilnadu including transpotation to the work site labour charge and water required for drilling at site etc a)150mm dia Bore

Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s up to 60m depth ending from ground level. a) Drilling of borewell in upto 60m

Supply and erection of following dia of PVC casing pipes (6Kg/cm2) as per IS 12818/2010 of approved quality for bore wells a) 150mm dia of PVC casing pipes (6Kg/cm2) (Shallow depth)

Supply and delivery of following dia of Ribbed screen PVC casing pipes (6Kg/cm2) without excise duty as per IS 12818/2010 of approved quality for bore wells a) 150mm dia

Labour charges for inserting of Following PVC Casing pipes assembly (With slots or without slots) in the drilled hole a) 150mm dia casing pipes assembly

Supply and fixing of 160mm dia PVC end cap of approved make as per IS 10124/1982 Part-II for borewell top cover of 6.1mm thick with inner thread

Charges for developing the bore well with air compressor of 300 CFM capacity (Minimun 8 Hours)

Supply and delivery of required dia Nylon rope of superior quality for submersible pumpset in borewell

Supply and delivery of clear water vertical wet type (single Phase) submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 without panel board Duty:20 LPM x 90m

Labour charges for the erection of submersible pumpset in borewell /openwell upto 5 HP

SINGLE PHASE PANEL BOARD- STAR- DELTA WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) a) 1.5 HP

Supply and laying of PVC insulated and sheathed follwing core and sq.mm flat type copper cable confirming to IS 694/1990,cable for submersible motor a) 3 core 4 Sq.mm flate type copper cable

Supplying, laying and jointing the following dia HDPE Pipe 10kg/cm2 of best approved quality with ISI mark suitable for Submersible pump in borewell class 5 a) 32mm dia HDPE Pipe

Supplying, delivery and laying of following dia UPVC pipe Schedule 40/ schedule 80 of approved ISI quality below Ground a) 32mm dia schedule 80

Supplying and fixing of porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick

Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety)

Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark grade ' P' or "S' trap - In Ground floor

Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade 'P' or 'S' trap

Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 a) 110 mm dia.

b) 75 mm dia.

Providing T.W.double leaf shutters with 9mm thick BWR Ply wood for cupboard/ward robes shutters

Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for waste water line

Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

Supplying and fixing of following dia PVC Bend as per IS 10124/1982 Part II with superior variety for joining the pipe a) 110 mm dia PVC bend fabricated 6 KSC

b) 160 mm dia PVC bend fabricated 6 KSC

Supplying and fixing of following dia PVC Equal tee as per IS 10124/1982 Part II with superior variety for joining the pipe a) 110 mm dia PVC Equal tee (Mould) BIS 7834/1975 Part VI

b) 160 mm dia PVC Equal tee (Mould) BIS 7834/1975 Part VI

Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings confirming to I.S. specification a) CP Shower Arm with Overhead Shower Rose

b) CP Angle cock tap

c) CP shower stop cock (Valve)

d) CP two Way bib cock with health faucet

Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement of clear opening heavy duty (35 M.T Capacity) a. 600mm x 600mm

b. 300mm x 300mm

Supplying and fixing of 20mm dia aluminium hanger rods

Supplying and fixing of aluminium towel rails of 75cm long

Supplying and fixing of aluminium plate with five pins for coat stand

Providing and fixing iron chromium plated 8 gauge Picture hooks

Supply and Fixing of Bevelled edge mirror of approved quality and brand of size 500x400x5.5mm

Supply and planting of avenue trees including earth work excavation for pit of size 60x60x60cm filled with manure for 20cm depth

Supplying and fixing of triangular shape chicken mesh tree guard

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark with suitable size PVC box (Fire retardant box) for coastal a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(PVC Electrical Box )

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Box )

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box )

Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)

Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0 m of 20mm B-class GI pipe

Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

Charges for assembling and fixing of ceiling fan

Supply and delivery of following Electric Ceiling fan with ISI mark a) 48" Electric fan 1200mm sweep

Supplying and fixing of 300 mm dia sweep AC exhaust fan of approved ISI Quality

Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb

Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark

Supplying and fixing of water tight Bulk head fitting suitable for 12 watts LED

Supply and fixing of LED Street lighting luminaries suitable for fixing following watts LED lamp b) 25watts LED lamp

Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

Run of 4 Wires of 10 sqmm PVC insulated single core multi strand

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Supplying and fixing of 250 Watts Metal halide Flood light etc.,

Supply and erection of Floor mounting panel board (cubical type) Incoming : 3 No. Of 200 A fuse units with 100 A neutral link Outgoings : 12 Nos. of 63A fuse units with 4 nos 63 A of neutral link and 40amps 4 pole isolator 4 nos 1 no of 32 A fuse units with 1 no 32 A of neutral link and 40 amps 2 pole isolator 1 no

Supplying and laying of 8 SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling etc

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal)

Supplying. Fabricating and erection of M.S Scheme Name board

Supplying and fixing in position of following size aluminium diecasting TNPHC Logo / Emblem with approved coloured powder coated in matt finishing a) 18" height TNPHC Emblem

Supplying and fixing of following size aluminium die casting lettering and numbering with approved coloured powder coated in matt finishing a) 9" dia aluminium

c) 12" dia aluminium

Supplying and fixing of following size plastic foam name plate 3mm thick with vinyl cutting letter with approved colours a) 20" X 5"

Supply and providing cable end termination of following core and sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection g) 3.5 core x 70 sq.mm

Supplying and laying of PVC aluminium armoured UG cable for service connection accessories L.T.1000V under ground cable with ISI mark g) 3.5 core 70 sq.mm. PVC Armoured UG Cable

Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugs g) 3.5 core x 70 sq.mm. PVC LTUG armoured cable

Supplying and clamping of PVC armoured LTUG cable on post or wall and ceiling with necessary MS Clamps, Brass screws, T.W. Plugs (Above GL) g) 3.5 core x 70 sq.mm. PVC LTUG armoured cable

Please Enable Macros to View BoQ information