Urgent Replacement of Cable

Amount

Supply & Delivery 1.1KV grade AL/XLPE/SWA/PVC cable (Make - RR/Havells/Gloster Cables) as per choice of EIC. 2 Core 10 Sq mm.

Laying of cable following cable on wall/surface incl. S & F MS saddles with making holes etc. as necy. mending good damages and painting 2 Core 10 Sq mm.

Laying of one No. following cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed 2 Core 10 Sq mm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 2 Core 10 Sq.mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 2 Core 10 Sq.mm

Wiring by 3x 1.5 sqmm single core PVC insulated copper wire through polythene pipe from loop box to fitting as per GS. [Make-Finolex/GlosterHavells/Polycab]

S&F of 250V double door Timer DB [equivalent of 2+8 way SPNDB] with sheet steel enclosure, pnosphitised powder coated neutral bar, DIN rail with IP-43 potection comprising with 1 no. 25A DPMCB ('C' curve 10KA), 2 no. 16A SPMCB ('C' curve 10KA), 1no. Programmable time switch-24 hrs with minimum switching of 15 minutes and 1 no. 18A/25A 2-Pole power contractor with inner-outer plate & internal wiring by suitable size of cu. wire incl. 1 no. Auto-Manual bypass toggle switch and provision for earthing attachment, incl. LED indication light for running condition with mechanical locking arrangement, as directed by EIC.[Make-ABB/L&T/Crabtree]

SITC of road lighting luminaire 250V, 65 W (Maximum) ( IP 66 ) with peanut lens and high power LED and to ensure uniform distribution, higher spacing between poles and maintenance free system and system lumen output will be minimum 7200 lumen suitable for use with 230Volt 50Hz AC supply etc as required. as directed by EIC.[Make: Philips BRP062 LED 65 W CW SLA S1 PSU / Havells/equivalent spec of K-Lite/Crompton] Analysis attached

Supply & delivery of 230 V, 18 Watt 2100 lm LED Tube light with PC body,Al heat sink as directed by EIC [Make-Philips/Crompton/Havells]

S&F of 9W LED lamp on exsting angular batten, as directed by EIC [Make-Philips/Crompton/Havells]

Supply & Fixing of 20 watt L.E.D recess light fittings for existing point.(Phlips make-DN296B LED20S-6500 PSU WH/ equivalent of CG/Havells)

Earthing with 50 mm dia ISI-Medium GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level. By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc as required.

Connecting the equipments to earth busbar including S&F 4 SWG Solid GI(Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Rate Sholud be including of all type of taxes .

DULAL DUTTA (BID ID -5635725)

Dutta Enterprise (BID ID -5637363)