shifting work of electric pole and electric transformer Ward No. 16 Bandemakan, Christian Colony and near Udayagiri signal mysuru city corporation limits

shifting work of electric pole and electric transformer Ward No. 16 Bandemakan, Christian Colony and near Udayagiri signal mysuru city corporation limits

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 .240 Sqmm, (55 GI Wires - 3.15 mm Dia...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 3x185 to 240 Sqmm

Heat Shrinkable Straight Through Jointing Kit for PILC Cable with Copper Lug & Al Ferrule. 3x240 Sqmm

Heat shrinkable Straight Through Joint.3x185 to 3x240 Sqmm

Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable. 3x240 Sqmm

Cable Covering Tile 125x250x40 mm

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m...

Covering cable with Tiles

Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL (Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991

Digging of Pit 2.5 Mtr depth for erection of 11 Mtr long Tubular Spun Pole as per approved Drawing. Hard Soil

RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-78

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Hard Soil

11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)

HG Fuse Unit as per IS-5350 Part-2. 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018)

Fixing of GOS including wiring (11 kV Single Break 200 Amps

M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates

Three H Frame without Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole for 63/100/250/500 kVA (UG Cable) - MS (Dwg No. BESCOM/GM/QS&S/69 Dtd 24.11.2018)

Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment

Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

Stringing of Conductor (including pin binding, providing jumps, dead ending, etc.,). Rabbit

11 kV, Horizontal Cross Arm - Mild Steel (MS)

Fixing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing

Releasing & Refixing of Over Head Service Mains (Single Phase/Three Phase) for consumer installation and street lighting and similar work (While replacing existing Pole)

DP Set (2 Pole Strucrure Kit) as per IS-1977. For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - MS

H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Digging of Pit for providing GI Pipe type Earthing. Ordinary Soil

HDPE/PLB Pipe 40/33 mm

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 Sqmm...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 2.5 to 25 Sqmm

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable.Up to 4C x 50 Sqmm