REPAIR MAINT OF ROAD INCLUDING ROAD FURNITURE INCLUDING SIGN BOARDS IN INS ANGRE INS KUNJALI HQ WNC AND VAJRABAHU AREA UNDER AGE BR II MBI UNDER GE NW KUNJALI COLABA MUMBAI

Amount

Material and labour for repair to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths, etc. Cutting around edges to atleast 25mm in depth, making good by filling in screened and graded road metal watering and well ramming including supply of road metal complete all as specified and directed by Engr-in-Charge.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed by Engr-in-Charge.

Material and labour for applying evenly a tack coat with paving bitumen of VG-10 grade at 5 Kg per 10 Sqm with the help of pressure sprayer complete all as specified and directed by Engineer-in-Charge.

Material and labour for Bituminous premix asphaltic dense concrete 40mm consolidated thickness with 6 % binder content of grade VG-30 by weight of total mix, laying with mechanical paver , rolled and compacted with static & vibrator roller to required camber and gradient complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of black bituminous road surface and applying thermo plastic road marking paint conforming toBS-3262 part I & II of 1989 (including dashes, arrows, letters etc) minimum 2mm thick, with an applicator machine and heated mixer, with stirring mechanism at temperature 160 degree centigrade), laid uniformly with width complete as per manufacturers instructions and directed by Engr-in-Charge.

Supply and fixing in repairs Direction CAT's eyes of size 100x90x19.80mm, two sides acrylic plastic reflector confirming to ASTM standards and fixed with epoxy/nail complete as per manufacturers instructions and directed by Engr-in-Charge.

Supply and fixing in repairs of solar round stud made of Poly carbonate ABS moulded body and shanks and PC top 3 Nos super bright LEDs on each side , also has dimond grade reflectors on each side for improved visibility size of stud is 113x70mm with 15mm above the ground when installed weight=780+/-20 gms, 1 No 1.2 V rechargeable battery, 2.5V, .25-.30Wsolar panel, visibility upto 600 mtrs,complete as per manufacturers instructions and directed by Engr-in-Charge.

Supply and fixing in repairs traffic signs made with high intensity grade tape (Avery or 3 M or equvalent brand ) pasted on 2 mm thick aluminium sheet back frame of board shall be made of stainless steel Gde 202, SS posts 750 mm dia of gde 202 in each board, letters to be laser cut and fixed on sheet (2 No) complete including excavation for post holes in any type of soil, refilling with PCC 1:4:8 type D2 after fixing angles complete all as specified and directed by Engr-in-Charge. Size and pattern are as under:-

HUMP AHEAD (600 MM DIA CIRCLE)

SPEED LIMIT (600 MM DIA CIRCLE)

RIGHT HAND CURVE (600 MM DIA CIRCLE)

INTERSECTION (600 MM DIA CIRCLE)

LEFT HAND CURVE (600 MM DIA CIRCLE)

Supply and fixing in repairs outdoor convex mirror of 100cm (min) dia polycarbonate lens, Brim and back holding plates of fibre reinforced plastic with stainless steel pole including excavation for post holes in any type of soil, refilling with PCC 1:4:8 type D2 including fixing at suitable height complete all as specified and directed by Engr-in-Charge.

Surface excvation n exc 30cm deep and averaging 15 cm deep and getting out in hard and dense soil complete all as specified and directed by Engr-in-Charge.

Material and labour for cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in apex stones, kerbs etc including weathering, slightly rounded or chamfered angles and throating, necessary form work complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair for portable speed bump PVC speed breaker, 250 x 300 x 50mm size including provision of anchor bolts, epoxy mortar grout and design complete all as specified and directed by Engr-in-Charge.

m/s ashoka enterprises

RS Enterprises

RAJENDRA CONSTRUCTION

MAA VAISHNAV CONSTRUCTION

MADHU ENTERPRIZES