Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.8 Craccepted-finance | ₹2.8 Cr | accepted-finance |
Tender Value
₹2.8 Cr
EMD Value
₹4.2 L
Closing Date
19 Jan 2026, 10:17 pmClosed
Public Works Department
Shivshankar Kamshetty
Improvements to Bhalki Chincholi SH 75 from KM 44.50 to KM 45.30 in Chitguppa Town Bidar(Chitguppa Town Limit) (BDR25322343)
PWD/2025-26/RD/WORK_INDENT30807
PWD/2025-26/RD/WORK_INDENT30807
Open
Roads
Two Tender Document System(Two Cover)
PWD Division Office Bidar
6 documents required · 6 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 (b) satisfactorily completed as prime contractor, at least one similar work such as Improvements to BT road such as of value not less than Rs. 139.05 Lakhs
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2019-20 ,2020-21 ,2021-22 ,2022-23 and 2023-24 (c) executed in any one year, the following minimum quantities of work (1) EWE: 2788.00 cum (2) GSB: 658.00 cum (3) WMM/WBM: 856.00 (4) BM/SDBC: 801.00 cum (5) RCC/PCC: 65.00 cum (6) Steel: 1.00 Tonne
Each Tenderer should further demonstrate: ( As per Govt. Circular No. PWD 60 CRM 2021 Dt 08.11.2021)(a) Availability by owning the required / specified key and critical equipment for this work is 1) Hotmix Plant (minimum 40/60 TPH) - 1 No. (2) Static Road Roller: 1 No.(3) Vibratory Road Roller : 1 No (4) Mechanical Paver Finisher : 1 No (5) Tippers : 2 Nos And availability by lease / Hire basis for this work is (1) Tippers -2 No. (2) Excavator like JCB/Hitachi : 2 No.(3) Water Tanker : 2 No. (The relevant documents ownership / commitment /agreements etc. for availability for this work are furnished)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Each Tenderer should further demonstrate: ( As per Govt. Circular No. PWD 60 CRM 2021 Dt 08.11.2021)(a) Availability by owning the required / specified key and critical equipment for this work is 1) Hotmix Plant (minimum 40/60 TPH) - 1 No. (2) Static Road Roller: 1 No.(3) Vibratory Road Roller : 1 No (4) Mechanical Paver Finisher : 1 No (5) Tippers : 2 Nos And availability by lease / Hire basis for this work is (1) Tippers -2 No. (2) Excavator like JCB/Hitachi : 2 No.(3) Water Tanker : 2 No. (The relevant documents ownership / commitment /agreements etc. for availability for this work are furnished)
Banker Details for reference
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 (a) achieved in at least two financial years a minimum financial turn over (in all cases of civil engineering construction works only) Rs. 556.16 Lakhs Turnover certificate must have UDI number , otherwise it will not be considered for further bid evaluation
Liquid assets and/or availability of credit facilities of no less than Rs. 92.70 Lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc
Total value of civl engineering works executed and payments received in the last five years (year-wise)
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
List of Financial Resources with Certificates
₹5,000
₹4.2 L
5 Jan 2026
5 Jan 2026
20 Jan 2026
17 Jan 2026
16 Jan 2026
Improvements to Bhalki Chincholi SH 75 from KM 44.50 to KM 45.30 in Chitguppa Town Bidar(Chitguppa Town Limit) (BDR25322343)
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...
Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...
Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...
Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...
Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...
Tack coat on Bituminous surface - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface clean...
Dense Graded Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified gradi...
Bituminous Concrete Grading II for traffic <20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, pre...
Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...
Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...
Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...
Road Delineators - Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fit...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...
Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation. Ref to MoRT&H : IRC - IS 164:2015
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...
Decorative light poles: Fabricating, supplying and erection of 11 Mtrs. long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door open...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core ...
Providing and laying Double wall Corrugated HDPE pipes for Electrical. Telecommunication & Signalling lines having flexibility & anti termite, anti corrosive, good abrasion, fatigue strength & UV resi...
Labour charges for laying of 1.1KV class UG cable in exisiting trench GI pipe/stoneware pipe/on wall/on pole as required.trench GI pipe/stoneware pipe/on pole as required.
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip.
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws size 20"...
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...
Supplying and fixing of 4 pole power contractor with NO/NC contacts on existing wood /panel board using necessary bolts,nuts,washers and wiring etc., complete with AC 3 rating and as per IS-13947 65Am...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter.
Supplying and fixing microprocessor based electronic timer(without contact ,Din mounting using necessary bolts,nuts and washers etc.,)3-120sec
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicatorON/OFF,energy cross-3 with Short circuit breaking capaci...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.63amps 4 pole
Supplying and fixing angle iron frame work fabricated out of M.S angle iron and M.S flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying heavy gauge PVC Conduit Pipe ….dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...
Supplying , fixing, wiring, earth electrode for grounding conduits, I.C cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit…. The pit sh...
Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts,bolts and washers 100Amps
Supplying of switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947 125 Amps
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. PWDSR(2023-24) page No-19 I.No.5.38
Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter
Supplying PVC flexible conduit pipe .mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF scr...
Supplying fixing and wiring 0 to 600 volts 96x96mm AC voltmeter on existing panel/wood board.
Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which a...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ov...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Fixing halogen/metal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Centring and Shuttering Charges 8% of Basic Rate
Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
eproc formats 1-10.xls
Instructions to Tenderers • 0.13 MB
Tender Guidelines-KW-4_RD_30807.docx
Instructions to Tenderers • 0.02 MB
bid doc_kw_4_RD_30807.doc
Tender Document • 1.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .