Establishment of 765/400KV AIS SS at Virudhunagar in Tirunelveli Region

Total Schedule No. 1 - Supply of Plants Currency INR

Total Schedule No. 1 - Supply of Plants Currency USD

Total Schedule No. 1 - Supply of Plants Currency JPY

Total Schedule No. 1 - Supply of Plants Currency EUR

Total Schedule No. 2 - Supply of Plants(Indegenous) (BOQ3)

Total Schedule No. 4A - Incidental Expenses including Inland freight & Insurance to be incurred in Employer’s Country (BOQ4)

Total Schedule No.4B - Civil works (BOQ5)

Total Schedule No.4C - (INSTALLATION SERVICES ) (BOQ6)

Description of Work / Item(s)

I Auto Transformer: 765/420KV,3X 500MVA , single phase Interconnection Transformer with OLTC with Nitrogen injection system for fire protection and line material required for formation of tertiary delta and neutral bus.(6 Nos + 1 No. for spare = Total 7 Nos.)

11 KV/433 V ,1000KVA , Station Transformer( including structure) with suitably rated scada Ready RMU (RRLL Configuration) with FRTU including suitably rated HT cables between RMU to Station Transformer and termination kits and LT supply cable, accessories & arrangements.FO communcation cables with necessary media converters for integrity FRTU in RMU with SAS

II REACTOR: 765 KV,110 MVAR, Single phase Bus Reactor with Nitrogen injection fire protection system and line materials for connectivity.

765 KV,110 MVAR, Single phase, Line Reactor with NGR with Nitrogen injection fire protection system and line materials for connectivity to NGR.

III Breakers: 765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure , pre-insertion resistor and CSD

765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure without pre-insertion resistor with CSD

765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH OUT CSD

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH CSD.

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure without pre-insertion resistor WITH CSD.

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH OUT CSD.

IV Current Transformer: 765 KV single phase 6 core current Transformer, 3000A, 50 KA, 1 Sec. with support structure and accessories and junction box (1No Junction box for 3CTs)

420 KV,3000A, 63 KA, 6 core single phase current Transformer with support structure ,accesssories and Junction box. (1No Junction box for 3CTs)

V. CVT: 765KV single phase CVT with support structure (1 No Junction box for 3CVTs)

420 KV single phase CVT with support structure (1 No Junction box for 3CVTs)

VI .LAS: 624 KV Lightning arrester with support structure

390 KV Lightning arrester with support structure

VII . ISOLATORS : 765 KV,3150Amps,50 KA, Isolator with double earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator with single earth with Insulator with support structure.

765 KV,3150Amps,50 KA, Isolator (single phase)with double earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator (single phase)with single earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator (single phase)without earth with Insulator with support structure.

420 KV,3150 Amps.63KA, Isolator with double earth with Insulator with support structure.

420 KV,3150 Amps,63KA, Isolator with single earth with Insulator with support structure. (2 Nos. isolators included for bus CVTs)

420 KV,3150 Amps.63KA, Isolator (single phase)with double earth with Insulator with support structure.

420 KV,3150 Amps,63KA, Isolator (single phase)with single earth with Insulator with support structure.

420KV ,3150 Amps,63KA, Isolator (single phase)without earth with Insulator with support structure.

VIII. BATTERY AND BATTERY CHARGER: 220 V 535 Amphere Hour (AH) complete battery Set with stand for 765 and 400KV bays.

220V, 100 Amps Battery charger for 765 and 400 KV bays

48V/1250Ah VRLA batteries

48 V 250 A Battery charger for 765 and 400 KV bays.

IX. BUS MATERIALS: 765 KV Solid core Insulator with corona ring

400 KV Solid core Insulator corona ring

11 KV 210 KN Anti fog Disc insulator

11 KV 160 KN Anti fog Disc insulator

4.5'' Aluminium BusBar

4.0'' Aluminium BusBar

AAC Bull conductor (765 KV Side)

Bersimis conductor(400KV side)

Bolted type Double Tension fitting with double anchoring Corona ring, suitable for 765 KV Quadraple AAC BULL 450 mm spacing

Bolted type Double Tension fitting with double anchoring Corona ring, suitable for400 KV Quadraple Besimis 450 mm spacing

X. POWER CONNECTOR : T Clamp for Twin BULL AAC to twin BULL AAC

T Clamp for Twin bersimis to twin bersimis

T Clamp for QUAD Bull AAC to QUAD bull AAC and Bersimis

T Clamp for QUAD BERSIMIS to QUAD BERSIMIS

T Clamp for 4.5'' Bus To QUAD/TWIN BULL AAC

T Clamp for 4.5'' Bus To QUAD/TWIN BESIMIS

" T " Clamp for Zebra to Zebra for line in dropper for LAS

Free end Clamp for 4.5" Bus Bar

Free end Clamp for 4" Bus Bar

T clamp for Zebra to Bus bar

Corona Bell for 4.5" Bus Bar

Corona Bell for 4.0 " Bus Bar

765 KV Spacer Clamp for QUAD AAC Bull 450 mm Spacing

400 KV Spacer Clamp for QUAD BESIMIS 450 mm Spacing

i) Switch end clamp for 4" Bus Bar

Joint Clamp for 100 mm Alu.BusBar welding sleeves

XI SUSPENSION FITTINGS: Bolted type Suspension fitting suitable for 765 KV Quad AAC BULL

Bolted type Suspension fitting suitable for 400 KV Quad Besimis

XII EARTHING: Supply of Earth mat ,auxiliary mat,earth electrode and vertical Earthing and earthflat of various sizes for equipment earthing

XIII. CONTROL CABLES: Copper cable 28 X 2.5 sq.mm Armoured

Copper cable 20 X 2.5 sq.mm Armoured

Copper cable 14 X 2.5 sq.mm Armoured

Copper cable 4 X 2.5 sq.mm Armoured

Copper cable 2 X 2.5 sq.mm Armoured

Copper cable 14 X 4 sq.mm Armoured

Copper cable 8 X 4 sq.mm Armoured

Copper cable 8 X 2.5 sq.mm Armoured

Copper cable 4 X 4 sq.mm Armoured

Copper cable 2 X 16 sq.mm Armoured

Copper cable 2 X 35 sq.mm Armoured

Aluminium cable 4 X 25 sq.mm Armoured

Aluminium cable 4 X120 sq.mm Armoured

Aluminium cable 4 X300 sq.mm Armoured

XIV. PANELS : AC panel for 765 ss

AC Distribution for Kiosk

DC Distribution Panel for 765ss

DC Distribution box for Kiosk

AC junction Box ( FRP)

DC interlock box (FRP)

Control & protection Panel for 765kv Line /Feeder

765 KV Bus bar protection panel

Control & protection Panel for 765kv Tie breaker bay

Control & protection Panel for 765Kv /400 KV ICT

Control & protection Panel for single phase spare 765Kv /400 KV ICT

Control & protection Panel for 765kv Bus reactor

Control & protection Panel for 765kv Line reactor

DFR cum PMU cum TWFL system complete with all devices for 2nos 765 KV Lines, DFR cum PMU system for 2nos 400KV Buses and common DFR workstation.

Synchronising cum Islanding Panel for 765KV Bays

400 KV Bus bar protection panel

Synchronising cum Islanding Panel for 400KV Bays

Control & protection Panel for 400kv Line /Feeder

48V DC/DB panel

Control & protection Panel for 400kv Tie breaker bay

Sub station Automation system for 765KV/400kv SS for 23 bays (11nos 765KV Bays, 12nos 400KV Bays)

Outdoor armoured 24Core FO Cable for connectivity of all kiosks with the SAS LAN and with station Auxiliary systems including all FODPs.

Spares for Control & protection panels and for SAS

Spares for DFR cum PMU cum TWFL equipment (Comprises 1no Acquisition unit and hardware modules of each type for Evaluation unit, Necessary accessories)

Control & protection Panel for 400kv Line for remote end station(Kayathar 400KV ss )

Control & protection Panel for 400kv Tie breaker bay

XV. IRON & STEEL: Galvanised Iron Heavy section steels (R.S. Joist 200 X 100 mm) For support structure and Station supply 6 pole structure

Galvanised Iron Light Sections Steels( Below 14.0 Kg /Mtr) such as MS Channels,MS Angles etc, For support struture and Station supply 6 pole structure

XVI FIRE FIGHTING EQUIPMENTS: Supply of mechanical foam type fire extinguisher trolly mounted 50L capacity with initial charge with complete set with hose and air induction nozzle and all accessories strictly conforming to latest issue of IS 13386/1992 with ISI certification

Supply of mechanical foam type portable 9 ltrs capacity fire extinguisher with initial charge complete with chromium plated GI Cap, High pressure nylon braided discharge hose, nozzle and all accessories strictly conforming to latest issue of IS 10204/2001 with ISI certification

Supply of Dry Chemical Powder Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose, dry powder level indicator and all accessories strictly conforming to the latest issue of IS specified with ISI certification

Trolly mounted 25 KG Capacity(IS 10658 of 1999)

Portable 10 KG Capacity (IS 1271 of 1999)

Portable 5 Kg Capacity (IS 1271 of 1999)

Supply of Automatic fire protection system with smoke detectors for Control Room,Kiosks & Cable gallery

XVII. DG SET: 500 KVA, 433 V, 3 PhaseWith Automatic mains failure system (AMF) panel for emergency AC supply Diesel Generator Set with its accessories.

XVIII. OTHER ITEMS: Rubber Mat 2000X1000X10 mm

G I Earth Wire 10.9 mm(tower top earth spike to ground)

GI Ladder type Cable tray 2.5 m L, 0.6 m W thickness 2mm with coupling plate and bolt nuts

GI Ladder type Cable tray 2.5 m L, 0.45 m W thickness 2mm with coupling plate and bolt nuts

GI Ladder type Cable tray 2.5 m L, 0.3 m W thickness 2 mm with coupling plate and bolt nuts

Supply of gauntlets

Supply of discharge rod as required by the field engineer with teak wood &copper flats etc.,

Supply of earth rod as required by the field engineer with teak wood & copper flats etc.

First aid box

Telescopic GI ladder 30' Height

Control room Cable duct cross angles and Runner Channels for panel Erection complete set (to a weight range of 1.2 -- 1.25 Tonnes)/complete including 6mm Chequred plate

Flexible copper tape / rope for interlinking panel,earthing and for providing connectivity

XIX. TESTING INSTRUMENTS: Three phase fully automatic Numerical relay test kit with laptop computer

True RMS Digital Multimeter

6 channel Transformer DC Winding resistance measurement kit (50A DC)

Digital Mini Clamp Meter(for mA current measurement range 10mA - 300mA - 30 - 300A)

Hand held 1KV digital insulation tester(Rechargeable battery operated)

10 kV Digital Insulation Tester (Rechargeable battery operated)

Digital Earth Resistance Clamp on Meter

Online Earth Tester (Auto Earth Tester)

Thermovision Camera

Circuit Breaker Analyzer Kit for 765kV SS with 6channel Static and Dynamic Contact Resistance Measurement feature and laptop computer

SF6 Gas Analyser with calibrator

Automatic Transformer Turn Ratio Meter

Handheld Digital Clamp Meter(True RMS AC/DC currents upto 2000 A)

Primary Injection Kit - 2000A

Computerised CT/PT Analyser Testing Kit with laptop computer

SFRA testing kit

Fully Automatic Capacitance & Tan Delta Measurement kit

Automatic Battery Discharge kit

Transformer Oil BDV Test Set

Optical Time Domain Reflecto Meter (OTDR)

Optical Splicing Kit

Optical Source Meter

Optical Power Meter

Bit Error Meter (E1 Tester)

Ethernet Tester

Ferruling Machine

XX. YARD LIGHTING: Lighting & Lightning Mast (LLM) with 6No's 72 W LED Light of tall 30 mtrs with accessories.

GI wire No 8

Manufacturing and supply of LC / Key board of size 3000 mm, length 1500 mm height made out of 75 x 25 mm aluminium frame embeded with 12mm prelaminated wood particle board using screws rear 2 Nos. of plain glass of 5mm thick fixed with metal roller moving on aluminium channel should be provided on front withlocking arrangements. Glass pieces should be fastened on the glass shutter for opening and closing wall clamps made out of 6mm M.S.plate should be provided on top as per drawing and as directed by the field Engineer including cost of all materials

Manufacturing and supply of fire bucket of 10 Litrecapacity made out of 26 (0.46mm) SWG MS sheet; Painted with white and red enamel paint inside and out side respectively; Bottom of bucket shall be 'U' shaped ;outside of the bucket shall be written as FIRE in English / Tamil in white enamel paint inculding cost of all materials.

XXI PLCC AND EPAX ITEMS Supply of Programmable Digital Power Line Carrier Equipment Carrier Set as per Technical Specification

HF Coaxial Cable

Supply of EPAX with Universal Slot Architecture wired for maximum capacity as per Technical Specification comprising the following: 1)1 no. MPSU 2) 1 no. CPU 3) Analog Card (for connecting 16 Subsribers ) 4) 1 no. E&M (for connecting 16 Trunks ) 5) 1 no. ISDN PRI/E1 card 6) VoIP - 8 Channels 7) Earthing

Telephones

Telephone Cable

Supply of 765 KV, 1.0 mH, 3150 Amp Wave Trap with pedestal mounting assembly and supporting structure for pedestal mounting arrangement suitable for 765 KV hexa zebra conductor.

Coupling Device suitable for digital PLCC equipment for 765 KV line phase to phase coupling.

Digital tele-protection coupler ( 8 commands)

XXII MISCELLENEOUS ITEMS: Environmental control unit which comprise of 2 Nos. two tonne capacity and type split A/C Air conditioners (1 Main + 1 standby) working inconjunction through a microprocessor based controller for desired operation.Each unit should have two compressors etc complete as per standard specification .

Supply of two tonne capacity celing cassette type split A/C airconditioners including startor and single phase preventer confirming IS 1391 -1971 including cost of materials, stabilisers, labour, wiring etc. complete as per standard specification .

Supplying of two tonne capacity Floor standing type A/C airconditioners including startor and single phase preventer confirming IS 1391 -1971including cost of materials, stabilisers, labour, wiring etc.complete as per standard specification .

Supplying of 25kWp LT Grid connected solar power plant with invertor at the rooftop of control room building as per direction of Engineer in charge ,including cost of materials, all accessories, stands, labour, wiring etc. complete as per standard specification .

145Kv 40KA(outdoor) SF6 Breaker(1phase)

110kv LAS

11kv VC Breaker 1250A (outdoor)

11KV CT (400/200-1A)

11KV AB SWITCH With Insulators

11KV Potential transformer

5KVA UPS with battery for emergency lighting purpose in control room

Description of Work / Item(s)

Amount

I Auto Transformer: 765/420KV,3X 500MVA , single phase Interconnection Transformer with OLTC with Nitrogen injection system for fire protection and line material required for formation of tertiary delta and neutral bus.(6 Nos + 1 No. for spare = Total 7 Nos.)

11 KV/433 V ,1000KVA , Station Transformer( including structure) with suitably rated scada Ready RMU (RRLL Configuration) with FRTU including suitably rated HT cables between RMU to Station Transformer and termination kits and LT supply cable, accessories & arrangements.FO communcation cables with necessary media converters for integrity FRTU in RMU with SAS

II REACTOR: 765 KV,110 MVAR, Single phase Bus Reactor with Nitrogen injection fire protection system and line materials for connectivity.

765 KV,110 MVAR, Single phase, Line Reactor with NGR with Nitrogen injection fire protection system and line materials for connectivity to NGR.

III Breakers: 765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure , pre-insertion resistor and CSD

765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure without pre-insertion resistor with CSD

765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH OUT CSD

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH CSD.

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure without pre-insertion resistor WITH CSD.

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH OUT CSD.

IV Current Transformer: 765 KV single phase 6 core current Transformer, 3000A, 50 KA, 1 Sec. with support structure and accessories and junction box (1No Junction box for 3CTs)

420 KV,3000A, 63 KA, 6 core single phase current Transformer with support structure ,accesssories and Junction box. (1No Junction box for 3CTs)

V. CVT: 765KV single phase CVT with support structure (1 No Junction box for 3CVTs)

420 KV single phase CVT with support structure (1 No Junction box for 3CVTs)

VI .LAS: 624 KV Lightning arrester with support structure

390 KV Lightning arrester with support structure

VII . ISOLATORS : 765 KV,3150Amps,50 KA, Isolator with double earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator with single earth with Insulator with support structure.

765 KV,3150Amps,50 KA, Isolator (single phase)with double earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator (single phase)with single earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator (single phase)without earth with Insulator with support structure.

420 KV,3150 Amps.63KA, Isolator with double earth with Insulator with support structure.

420 KV,3150 Amps,63KA, Isolator with single earth with Insulator with support structure. (2 Nos. isolators included for bus CVTs)

420 KV,3150 Amps.63KA, Isolator (single phase)with double earth with Insulator with support structure.

420 KV,3150 Amps,63KA, Isolator (single phase)with single earth with Insulator with support structure.

420KV ,3150 Amps,63KA, Isolator (single phase)without earth with Insulator with support structure.

VIII. BATTERY AND BATTERY CHARGER: 220 V 535 Amphere Hour (AH) complete battery Set with stand for 765 and 400KV bays.

220V, 100 Amps Battery charger for 765 and 400 KV bays

48V/1250Ah VRLA batteries

48 V 250 A Battery charger for 765 and 400 KV bays.

IX. BUS MATERIALS: 765 KV Solid core Insulator with corona ring

400 KV Solid core Insulator corona ring

11 KV 210 KN Anti fog Disc insulator

11 KV 160 KN Anti fog Disc insulator

4.5'' Aluminium BusBar

4.0'' Aluminium BusBar

AAC Bull conductor (765 KV Side)

Bersimis conductor(400KV side)

Bolted type Double Tension fitting with double anchoring Corona ring, suitable for 765 KV Quadraple AAC BULL 450 mm spacing

Bolted type Double Tension fitting with double anchoring Corona ring, suitable for400 KV Quadraple Besimis 450 mm spacing

X. POWER CONNECTOR : T Clamp for Twin BULL AAC to twin BULL AAC

T Clamp for Twin bersimis to twin bersimis

T Clamp for QUAD Bull AAC to QUAD bull AAC and Bersimis

T Clamp for QUAD BERSIMIS to QUAD BERSIMIS

T Clamp for 4.5'' Bus To QUAD/TWIN BULL AAC

T Clamp for 4.5'' Bus To QUAD/TWIN BESIMIS

" T " Clamp for Zebra to Zebra for line in dropper for LAS

Free end Clamp for 4.5" Bus Bar

Free end Clamp for 4" Bus Bar

T clamp for Zebra to Bus bar

Corona Bell for 4.5" Bus Bar

Corona Bell for 4.0 " Bus Bar

765 KV Spacer Clamp for QUAD AAC Bull 450 mm Spacing

400 KV Spacer Clamp for QUAD BESIMIS 450 mm Spacing

i) Switch end clamp for 4" Bus Bar

Joint Clamp for 100 mm Alu.BusBar welding sleeves

XI SUSPENSION FITTINGS: Bolted type Suspension fitting suitable for 765 KV Quad AAC BULL

Bolted type Suspension fitting suitable for 400 KV Quad Besimis

XII EARTHING: Supply of Earth mat ,auxiliary mat,earth electrode and vertical Earthing and earthflat of various sizes for equipment earthing

XIII. CONTROL CABLES: Copper cable 28 X 2.5 sq.mm Armoured

Copper cable 20 X 2.5 sq.mm Armoured

Copper cable 14 X 2.5 sq.mm Armoured

Copper cable 4 X 2.5 sq.mm Armoured

Copper cable 2 X 2.5 sq.mm Armoured

Copper cable 14 X 4 sq.mm Armoured

Copper cable 8 X 4 sq.mm Armoured

Copper cable 8 X 2.5 sq.mm Armoured

Copper cable 4 X 4 sq.mm Armoured

Copper cable 2 X 16 sq.mm Armoured

Copper cable 2 X 35 sq.mm Armoured

Aluminium cable 4 X 25 sq.mm Armoured

Aluminium cable 4 X120 sq.mm Armoured

Aluminium cable 4 X300 sq.mm Armoured

XIV. PANELS : AC panel for 765 ss

AC Distribution for Kiosk

DC Distribution Panel for 765ss

DC Distribution box for Kiosk

AC junction Box ( FRP)

DC interlock box (FRP)

Control & protection Panel for 765kv Line /Feeder

765 KV Bus bar protection panel

Control & protection Panel for 765kv Tie breaker bay

Control & protection Panel for 765Kv /400 KV ICT

Control & protection Panel for single phase spare 765Kv /400 KV ICT

Control & protection Panel for 765kv Bus reactor

Control & protection Panel for 765kv Line reactor

DFR cum PMU cum TWFL system complete with all devices for 2nos 765 KV Lines, DFR cum PMU system for 2nos 400KV Buses and common DFR workstation.

Synchronising cum Islanding Panel for 765KV Bays

400 KV Bus bar protection panel

Synchronising cum Islanding Panel for 400KV Bays

Control & protection Panel for 400kv Line /Feeder

48V DC/DB panel

Control & protection Panel for 400kv Tie breaker bay

Sub station Automation system for 765KV/400kv SS for 23 bays (11nos 765KV Bays, 12nos 400KV Bays)

Outdoor armoured 24Core FO Cable for connectivity of all kiosks with the SAS LAN and with station Auxiliary systems including all FODPs.

Spares for Control & protection panels and for SAS

Spares for DFR cum PMU cum TWFL equipment (Comprises 1no Acquisition unit and hardware modules of each type for Evaluation unit, Necessary accessories)

Control & protection Panel for 400kv Line for remote end station(Kayathar 400KV ss )

Control & protection Panel for 400kv Tie breaker bay

XV. IRON & STEEL: Galvanised Iron Heavy section steels (R.S. Joist 200 X 100 mm) For support structure and Station supply 6 pole structure

Galvanised Iron Light Sections Steels( Below 14.0 Kg /Mtr) such as MS Channels,MS Angles etc, For support struture and Station supply 6 pole structure

XVI FIRE FIGHTING EQUIPMENTS: Supply of mechanical foam type fire extinguisher trolly mounted 50L capacity with initial charge with complete set with hose and air induction nozzle and all accessories strictly conforming to latest issue of IS 13386/1992 with ISI certification

Supply of mechanical foam type portable 9 ltrs capacity fire extinguisher with initial charge complete with chromium plated GI Cap, High pressure nylon braided discharge hose, nozzle and all accessories strictly conforming to latest issue of IS 10204/2001 with ISI certification

Supply of Dry Chemical Powder Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose, dry powder level indicator and all accessories strictly conforming to the latest issue of IS specified with ISI certification

Trolly mounted 25 KG Capacity(IS 10658 of 1999)

Portable 10 KG Capacity (IS 1271 of 1999)

Portable 5 Kg Capacity (IS 1271 of 1999)

Supply of Automatic fire protection system with smoke detectors for Control Room,Kiosks & Cable gallery

XVII. DG SET: 500 KVA, 433 V, 3 PhaseWith Automatic mains failure system (AMF) panel for emergency AC supply Diesel Generator Set with its accessories.

XVIII. OTHER ITEMS: Rubber Mat 2000X1000X10 mm

G I Earth Wire 10.9 mm(tower top earth spike to ground)

GI Ladder type Cable tray 2.5 m L, 0.6 m W thickness 2mm with coupling plate and bolt nuts

GI Ladder type Cable tray 2.5 m L, 0.45 m W thickness 2mm with coupling plate and bolt nuts

GI Ladder type Cable tray 2.5 m L, 0.3 m W thickness 2 mm with coupling plate and bolt nuts

Supply of gauntlets

Supply of discharge rod as required by the field engineer with teak wood &copper flats etc.,

Supply of earth rod as required by the field engineer with teak wood & copper flats etc.

First aid box

Telescopic GI ladder 30' Height

Control room Cable duct cross angles and Runner Channels for panel Erection complete set (to a weight range of 1.2 -- 1.25 Tonnes)/complete including 6mm Chequred plate

Flexible copper tape / rope for interlinking panel,earthing and for providing connectivity

XIX. TESTING INSTRUMENTS: Three phase fully automatic Numerical relay test kit with laptop computer

True RMS Digital Multimeter

6 channel Transformer DC Winding resistance measurement kit (50A DC)

Digital Mini Clamp Meter(for mA current measurement range 10mA - 300mA - 30 - 300A)

Hand held 1KV digital insulation tester(Rechargeable battery operated)

10 kV Digital Insulation Tester (Rechargeable battery operated)

Digital Earth Resistance Clamp on Meter

Online Earth Tester (Auto Earth Tester)

Thermovision Camera

Circuit Breaker Analyzer Kit for 765kV SS with 6channel Static and Dynamic Contact Resistance Measurement feature and laptop computer

SF6 Gas Analyser with calibrator

Automatic Transformer Turn Ratio Meter

Handheld Digital Clamp Meter(True RMS AC/DC currents upto 2000 A)

Primary Injection Kit - 2000A

Computerised CT/PT Analyser Testing Kit with laptop computer

SFRA testing kit

Fully Automatic Capacitance & Tan Delta Measurement kit

Automatic Battery Discharge kit

Transformer Oil BDV Test Set

Optical Time Domain Reflecto Meter (OTDR)

Optical Splicing Kit

Optical Source Meter

Optical Power Meter

Bit Error Meter (E1 Tester)

Ethernet Tester

Ferruling Machine

XX. YARD LIGHTING: Lighting & Lightning Mast (LLM) with 6No's 72 W LED Light of tall 30 mtrs with accessories.

GI wire No 8

Manufacturing and supply of LC / Key board of size 3000 mm, length 1500 mm height made out of 75 x 25 mm aluminium frame embeded with 12mm prelaminated wood particle board using screws rear 2 Nos. of plain glass of 5mm thick fixed with metal roller moving on aluminium channel should be provided on front withlocking arrangements. Glass pieces should be fastened on the glass shutter for opening and closing wall clamps made out of 6mm M.S.plate should be provided on top as per drawing and as directed by the field Engineer including cost of all materials

Manufacturing and supply of fire bucket of 10 Litrecapacity made out of 26 (0.46mm) SWG MS sheet; Painted with white and red enamel paint inside and out side respectively; Bottom of bucket shall be 'U' shaped ;outside of the bucket shall be written as FIRE in English / Tamil in white enamel paint inculding cost of all materials.

XXI PLCC AND EPAX ITEMS Supply of Programmable Digital Power Line Carrier Equipment Carrier Set as per Technical Specification

HF Coaxial Cable

Supply of EPAX with Universal Slot Architecture wired for maximum capacity as per Technical Specification comprising the following: 1)1 no. MPSU 2) 1 no. CPU 3) Analog Card (for connecting 16 Subsribers ) 4) 1 no. E&M (for connecting 16 Trunks ) 5) 1 no. ISDN PRI/E1 card 6) VoIP - 8 Channels 7) Earthing

Telephones

Telephone Cable

Supply of 765 KV, 1.0 mH, 3150 Amp Wave Trap with pedestal mounting assembly and supporting structure for pedestal mounting arrangement suitable for 765 KV hexa zebra conductor.

Coupling Device suitable for digital PLCC equipment for 765 KV line phase to phase coupling.

Digital tele-protection coupler ( 8 commands)

XXII MISCELLENEOUS ITEMS: Environmental control unit which comprise of 2 Nos. two tonne capacity and type split A/C Air conditioners (1 Main + 1 standby) working inconjunction through a microprocessor based controller for desired operation.Each unit should have two compressors etc complete as per standard specification .

Supply of two tonne capacity celing cassette type split A/C airconditioners including startor and single phase preventer confirming IS 1391 -1971 including cost of materials, stabilisers, labour, wiring etc. complete as per standard specification .

Supplying of two tonne capacity Floor standing type A/C airconditioners including startor and single phase preventer confirming IS 1391 -1971including cost of materials, stabilisers, labour, wiring etc.complete as per standard specification .

Supplying of 25kWp LT Grid connected solar power plant with invertor at the rooftop of control room building as per direction of Engineer in charge ,including cost of materials, all accessories, stands, labour, wiring etc. complete as per standard specification .

145Kv 40KA(outdoor) SF6 Breaker(1phase)

110kv LAS

11kv VC Breaker 1250A (outdoor)

11KV CT (400/200-1A)

11KV AB SWITCH With Insulators

11KV Potential transformer

5KVA UPS with battery for emergency lighting purpose in control room

Description of Work / Item(s)

Amount

I Auto Transformer: 765/420KV,3X 500MVA, single phase Interconnection Transformer with OLTC with Nitrogen injection system for fire protection and line material required for formation of tertiary delta and neutral bus.(6 Nos + 1 No. for spare = Total 7 Nos.)

11 KV/433 V ,1000KVA , Station Transformer( including structure) with suitably rated scada Ready RMU (RRLL Configuration) with FRTU including suitably rated HT cables between RMU to Station Transformer and termination kits and LT supply cable, accessories & arrangements.FO communcation cables with necessary media converters for integrity FRTU in RMU with SAS

II REACTOR: 765 KV,110 MVAR, Single phase Bus Reactor with Nitrogen injection fire protection system and line materials for connectivity.

765 KV,110 MVAR, Single phase, Line Reactor with NGR with Nitrogen injection fire protection system and line materials for connectivity to NGR.

III Breakers: 765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure , pre-insertion resistor and CSD

765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure without pre-insertion resistor with CSD

765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH OUT CSD

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH CSD.

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure without pre-insertion resistor WITH CSD.

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH OUT CSD.

IV Current Transformer: 765 KV single phase 6 core current Transformer, 3000A, 50 KA, 1 Sec. with support structure and accessories and junction box (1No Junction box for 3CTs)

420 KV,3000A, 63 KA, 6 core single phase current Transformer with support structure ,accesssories and Junction box. (1No Junction box for 3CTs)

V. CVT: 765KV single phase CVT with support structure (1 No Junction box for 3CVTs)

420 KV single phase CVT with support structure (1 No Junction box for 3CVTs)

VI .LAS: 624 KV Lightning arrester with support structure

390 KV Lightning arrester with support structure

VII . ISOLATORS : 765 KV,3150Amps,50 KA, Isolator with double earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator with single earth with Insulator with support structure.

765 KV,3150Amps,50 KA, Isolator (single phase)with double earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator (single phase)with single earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator (single phase)without earth with Insulator with support structure.

420 KV,3150 Amps.63KA, Isolator with double earth with Insulator with support structure.

420 KV,3150 Amps,63KA, Isolator with single earth with Insulator with support structure. (2 Nos. isolators included for bus CVTs)

420 KV,3150 Amps.63KA, Isolator (single phase)with double earth with Insulator with support structure.

420 KV,3150 Amps,63KA, Isolator (single phase)with single earth with Insulator with support structure.

420KV ,3150 Amps,63KA, Isolator (single phase)without earth with Insulator with support structure.

VIII. BATTERY AND BATTERY CHARGER: 220 V 535 Amphere Hour (AH) complete battery Set with stand for 765 and 400KV bays.

220V, 100 Amps Battery charger for 765 and 400 KV bays

48V/1250Ah VRLA batteries

48 V 250 A Battery charger for 765 and 400 KV bays.

IX. BUS MATERIALS: 765 KV Solid core Insulator with corona ring

400 KV Solid core Insulator corona ring

11 KV 210 KN Anti fog Disc insulator

11 KV 160 KN Anti fog Disc insulator

4.5'' Aluminium BusBar

4.0'' Aluminium BusBar

AAC Bull conductor (765 KV Side)

Bersimis conductor(400KV side)

Bolted type Double Tension fitting with double anchoring Corona ring, suitable for 765 KV Quadraple AAC BULL 450 mm spacing

Bolted type Double Tension fitting with double anchoring Corona ring, suitable for400 KV Quadraple Besimis 450 mm spacing

X. POWER CONNECTOR : T Clamp for Twin BULL AAC to twin BULL AAC

T Clamp for Twin bersimis to twin bersimis

T Clamp for QUAD Bull AAC to QUAD bull AAC and Bersimis

T Clamp for QUAD BERSIMIS to QUAD BERSIMIS

T Clamp for 4.5'' Bus To QUAD/TWIN BULL AAC

T Clamp for 4.5'' Bus To QUAD/TWIN BESIMIS

" T " Clamp for Zebra to Zebra for line in dropper for LAS

Free end Clamp for 4.5" Bus Bar

Free end Clamp for 4" Bus Bar

T clamp for Zebra to Bus bar

Corona Bell for 4.5" Bus Bar

Corona Bell for 4.0 " Bus Bar

765 KV Spacer Clamp for QUAD AAC Bull 450 mm Spacing

400 KV Spacer Clamp for QUAD BESIMIS 450 mm Spacing

i) Switch end clamp for 4" Bus Bar

Joint Clamp for 100 mm Alu.BusBar welding sleeves

XI SUSPENSION FITTINGS: Bolted type Suspension fitting suitable for 765 KV Quad AAC BULL

Bolted type Suspension fitting suitable for 400 KV Quad Besimis

XII EARTHING: Supply of Earth mat ,auxiliary mat,earth electrode and vertical Earthing and earthflat of various sizes for equipment earthing

XIII. CONTROL CABLES: Copper cable 28 X 2.5 sq.mm Armoured

Copper cable 20 X 2.5 sq.mm Armoured

Copper cable 14 X 2.5 sq.mm Armoured

Copper cable 4 X 2.5 sq.mm Armoured

Copper cable 2 X 2.5 sq.mm Armoured

Copper cable 14 X 4 sq.mm Armoured

Copper cable 8 X 4 sq.mm Armoured

Copper cable 8 X 2.5 sq.mm Armoured

Copper cable 4 X 4 sq.mm Armoured

Copper cable 2 X 16 sq.mm Armoured

Copper cable 2 X 35 sq.mm Armoured

Aluminium cable 4 X 25 sq.mm Armoured

Aluminium cable 4 X120 sq.mm Armoured

Aluminium cable 4 X300 sq.mm Armoured

XIV. PANELS : AC panel for 765 ss

AC Distribution for Kiosk

DC Distribution Panel for 765ss

DC Distribution box for Kiosk

AC junction Box ( FRP)

DC interlock box (FRP)

Control & protection Panel for 765kv Line /Feeder

765 KV Bus bar protection panel

Control & protection Panel for 765kv Tie breaker bay

Control & protection Panel for 765Kv /400 KV ICT

Control & protection Panel for single phase spare 765Kv /400 KV ICT

Control & protection Panel for 765kv Bus reactor

Control & protection Panel for 765kv Line reactor

DFR cum PMU cum TWFL system complete with all devices for 2nos 765 KV Lines, DFR cum PMU system for 2nos 400KV Buses and common DFR workstation.

Synchronising cum Islanding Panel for 765KV Bays

400 KV Bus bar protection panel

Synchronising cum Islanding Panel for 400KV Bays

Control & protection Panel for 400kv Line /Feeder

48V DC/DB panel

Control & protection Panel for 400kv Tie breaker bay

Sub station Automation system for 765KV/400kv SS for 23 bays (11nos 765KV Bays, 12nos 400KV Bays)

Outdoor armoured 24Core FO Cable for connectivity of all kiosks with the SAS LAN and with station Auxiliary systems including all FODPs.

Spares for Control & protection panels and for SAS

Spares for DFR cum PMU cum TWFL equipment (Comprises 1no Acquisition unit and hardware modules of each type for Evaluation unit, Necessary accessories)

Control & protection Panel for 400kv Line for remote end station(Kayathar 400KV ss )

Control & protection Panel for 400kv Tie breaker bay

XV. IRON & STEEL: Galvanised Iron Heavy section steels (R.S. Joist 200 X 100 mm) For support structure and Station supply 6 pole structure

Galvanised Iron Light Sections Steels( Below 14.0 Kg /Mtr) such as MS Channels,MS Angles etc, For support struture and Station supply 6 pole structure

XVI FIRE FIGHTING EQUIPMENTS: Supply of mechanical foam type fire extinguisher trolly mounted 50L capacity with initial charge with complete set with hose and air induction nozzle and all accessories strictly conforming to latest issue of IS 13386/1992 with ISI certification

Supply of mechanical foam type portable 9 ltrs capacity fire extinguisher with initial charge complete with chromium plated GI Cap, High pressure nylon braided discharge hose, nozzle and all accessories strictly conforming to latest issue of IS 10204/2001 with ISI certification

Supply of Dry Chemical Powder Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose, dry powder level indicator and all accessories strictly conforming to the latest issue of IS specified with ISI certification

Trolly mounted 25 KG Capacity(IS 10658 of 1999)

Portable 10 KG Capacity (IS 1271 of 1999)

Portable 5 Kg Capacity (IS 1271 of 1999)

Supply of Automatic fire protection system with smoke detectors for Control Room,Kiosks & Cable gallery

XVII. DG SET: 500 KVA, 433 V, 3 PhaseWith Automatic mains failure system (AMF) panel for emergency AC supply Diesel Generator Set with its accessories.

XVIII. OTHER ITEMS: Rubber Mat 2000X1000X10 mm

G I Earth Wire 10.9 mm(tower top earth spike to ground)

GI Ladder type Cable tray 2.5 m L, 0.6 m W thickness 2mm with coupling plate and bolt nuts

GI Ladder type Cable tray 2.5 m L, 0.45 m W thickness 2mm with coupling plate and bolt nuts

GI Ladder type Cable tray 2.5 m L, 0.3 m W thickness 2 mm with coupling plate and bolt nuts

Supply of gauntlets

Supply of discharge rod as required by the field engineer with teak wood &copper flats etc.,

Supply of earth rod as required by the field engineer with teak wood & copper flats etc.

First aid box

Telescopic GI ladder 30' Height

Control room Cable duct cross angles and Runner Channels for panel Erection complete set (to a weight range of 1.2 -- 1.25 Tonnes)/complete including 6mm Chequred plate

Flexible copper tape / rope for interlinking panel,earthing and for providing connectivity

XIX. TESTING INSTRUMENTS: Three phase fully automatic Numerical relay test kit with laptop computer

True RMS Digital Multimeter

6 channel Transformer DC Winding resistance measurement kit (50A DC)

Digital Mini Clamp Meter(for mA current measurement range 10mA - 300mA - 30 - 300A)

Hand held 1KV digital insulation tester(Rechargeable battery operated)

10 kV Digital Insulation Tester (Rechargeable battery operated)

Digital Earth Resistance Clamp on Meter

Online Earth Tester (Auto Earth Tester)

Thermovision Camera

Circuit Breaker Analyzer Kit for 765kV SS with 6channel Static and Dynamic Contact Resistance Measurement feature and laptop computer

SF6 Gas Analyser with calibrator

Automatic Transformer Turn Ratio Meter

Handheld Digital Clamp Meter(True RMS AC/DC currents upto 2000 A)

Primary Injection Kit - 2000A

Computerised CT/PT Analyser Testing Kit with laptop computer

SFRA testing kit

Fully Automatic Capacitance & Tan Delta Measurement kit

Automatic Battery Discharge kit

Transformer Oil BDV Test Set

Optical Time Domain Reflecto Meter (OTDR)

Optical Splicing Kit

Optical Source Meter

Optical Power Meter

Bit Error Meter (E1 Tester)

Ethernet Tester

Ferruling Machine

XX. YARD LIGHTING: Lighting & Lightning Mast (LLM) with 6No's 72 W LED Light of tall 30 mtrs with accessories.

GI wire No 8

Manufacturing and supply of LC / Key board of size 3000 mm, length 1500 mm height made out of 75 x 25 mm aluminium frame embeded with 12mm prelaminated wood particle board using screws rear 2 Nos. of plain glass of 5mm thick fixed with metal roller moving on aluminium channel should be provided on front withlocking arrangements. Glass pieces should be fastened on the glass shutter for opening and closing wall clamps made out of 6mm M.S.plate should be provided on top as per drawing and as directed by the field Engineer including cost of all materials

Manufacturing and supply of fire bucket of 10 Litrecapacity made out of 26 (0.46mm) SWG MS sheet; Painted with white and red enamel paint inside and out side respectively; Bottom of bucket shall be 'U' shaped ;outside of the bucket shall be written as FIRE in English / Tamil in white enamel paint inculding cost of all materials.

XXI PLCC AND EPAX ITEMS Supply of Programmable Digital Power Line Carrier Equipment Carrier Set as per Technical Specification

HF Coaxial Cable

Supply of EPAX with Universal Slot Architecture wired for maximum capacity as per Technical Specification comprising the following: 1)1 no. MPSU 2) 1 no. CPU 3) Analog Card (for connecting 16 Subsribers ) 4) 1 no. E&M (for connecting 16 Trunks ) 5) 1 no. ISDN PRI/E1 card 6) VoIP - 8 Channels 7) Earthing

Telephones

Telephone Cable

Supply of 765 KV, 1.0 mH, 3150 Amp Wave Trap with pedestal mounting assembly and supporting structure for pedestal mounting arrangement suitable for 765 KV hexa zebra conductor.

Coupling Device suitable for digital PLCC equipment for 765 KV line phase to phase coupling.

Digital tele-protection coupler ( 8 commands)

XXII MISCELLENEOUS ITEMS: Environmental control unit which comprise of 2 Nos. two tonne capacity and type split A/C Air conditioners (1 Main + 1 standby) working inconjunction through a microprocessor based controller for desired operation.Each unit should have two compressors etc complete as per standard specification .

Supply of two tonne capacity celing cassette type split A/C airconditioners including startor and single phase preventer confirming IS 1391 -1971 including cost of materials, stabilisers, labour, wiring etc. complete as per standard specification .

Supplying of two tonne capacity Floor standing type A/C airconditioners including startor and single phase preventer confirming IS 1391 -1971including cost of materials, stabilisers, labour, wiring etc.complete as per standard specification .

Supplying of 25kWp LT Grid connected solar power plant with invertor at the rooftop of control room building as per direction of Engineer in charge ,including cost of materials, all accessories, stands, labour, wiring etc. complete as per standard specification .

145Kv 40KA(outdoor) SF6 Breaker(1phase)

110kv LAS

11kv VC Breaker 1250A (outdoor)

11KV CT (400/200-1A)

11KV AB SWITCH With Insulators

11KV Potential transformer

5KVA UPS with battery for emergency lighting purpose in control room

Description of Work / Item(s)

Amount

Design of main Control room Building and bay control room building as per requirement of panels including design calculations, detailed drawings foundation, electrification , water line, sewer line etc. complete. etc as per technical specifications and relevant latest IS. (10 sets of Design and Drawings with Soft Copy)

Design of 765/400KV SS structures, structure plinths, transformer plinth and all allied eqipment plinths etc including design calculations, detailed drawings foundation, electrification and Electrical layout drawing, water line, sewer line, storm water drainage,cable duct, road,culvert,overhead water tank,ground level water tank,oil sump etc. complete for all requirements of765/400KV SS., as per technical specifications and relevant latest IS. (10 sets of Design and Drawings with Soft Copy)

Earth work excavation for foundation for the following classification of soil as per standard specification including dewatering etc;complete as per standard specification.

In Hard stiff clay and gravelly soil

In soft disintegrated rock not reqiring blasting

In medium & dense medium rock not requiring blasting

In medium & dense medium rock requiring blasting

Removal of hard rock by blasting

Removal of hard rock by wedging & chiselling/using compressor and jack hammer complete asper standard specification.

Refilling the foundation and basement with excavated earth including ramming as per specification , cost of all materials, leads and lifts etc. Complete as per standard specification.

Filling the foundation , basement and yard area with quarry dust including ramming, leadsand lifts etc. Complete as per standard specification.

Filling the foundation and basement with river sand including watering, ramming, lead and lift etc. completeas per standard specification.

Providing anti termite treatment in 4 stages (I) immediate after excavation and before laying foundation concrete (II) after refilling for sides of foundation (III) Before laying of flooring concrete (IV) outside of basement upto 1m alround the building using termite 250ml for 5lit of water etc. complete as per standard specification.

Plain cement concrete 1:3:6 using 40mm (machine crushed) hard broken stone including cost of all materials,With formwork, labour,curing, leads and lifts etc, complete as per standard specification.

M20 Grade Design Mix with minimum cement content of 320kg/cum using 12 to 20mm size HBG stone including cost of all materials, form work, centering and curing all leads, lifts etc., complete as per standard specification but excluding cost of reinforcement. For road& foundation

M20 Grade Design Mix with minimum cement content of 320kg/cum using 12 to 20mm size hard broken stone including cost of all materials, form work, centering and all leads, lifts etc., complete as per standard specification but excluding cost of reinforcement. For columns below ground level

M20 Grade Design Mix with minimum cement content of 320kg/cum using 12 to 20mm size HBG including cost of all materials, form work, centering, curing and all leads, lifts etc., complete as per specification but excluding cost of reinforcement. For Plinth Beam/Grade Beam

M20 Grade Design Mix with minimum cement content of 320kg/cum using 12 mm to 20mm size HBG stone including cost of all materials, form work, centering,vibrating, curing and all leads, lifts etc., complete as per specification but excluding cost of reinforcement. For columns

Ground floor

First floor

second floor

M20 Grade Design Mix with minimum cement content of 320kg/cum using 12 mm to 20mm size HBG stone including cost of all materials, form work, centering,vibrating, curing and all leads, lifts etc., complete as per standard specification but excluding cost of steel reinforcementcomplete, For beams (rib portion only)in all floors .

M20 Grade Design Mix with minimum cement content of 320kg/cum using 12 mm to 20mm size hard broken granite stone including cost of all materials, form work, centering, curing and all leads, lifts etc., complete as per standard specification but excluding cost of reinforcement . For slab

Slab 150 mm thick over ground floor

Slab 100 mm thick over porch

Slab 130 mm thick over first floor

Slab 130 mm thick over second floor

M20 Grade Design Mix with minimum cement content of 320kg/cum using 12mm to 20mm HBG stone including cost of all materials, form work, centering, curing and all leads, lifts etc., complete as per standard specification. but excluding cost of reinforcement complete, For Lintel

Ground floor

First floor

second floor

Plain cement concrete 1:4:8, 100mm thick using 40mm hard broken granite stone including cot of all materials, form work for leveling course of floor finished to receive granolithic floor etc complete as per standard specification.

M20 Grade Design Mix with minimum cement content of 320kg/cum using 12mm to 20mm hard broken granite stone including cost of all materials, form work, centering, curing etc but excluding cost of reinforcement complete,as per standard specification. For sunshade including the front (chajja)

Supplying and fixing PVC downfall pipes 100/110 mm dia with working pressure 4kg/cm² necessary couplings, grating shoes,bends, clamps etc complete including cost of all materials and making holes in masonry / concrete and restoring affected surface to original condition.

Brick work in CM 1:5 using II Class chamber burnt bricks size 23x11.5x7.5 cm for basement & super structure including cost of all materials,scaffolding, leads, lift and curing etc complete as per standard specification.

For ground floor

For First floor

second floor

Brick work in CM 1:3 using II Class ground moulded chamber burnt bricks size 23x11.5x7.5 cm including cost of material, scaffolding all labour ,leads and lifts, etc,complete complete,as per standard specification.

For Ground Floor

For First Floor

second floor

Granolithic cement concrete PCC 1:2:4 for floor finish 20 mm thick using stone chippings of 6-12 mm size and below.including cost of all materials, labour, lead, lift etc complete complete,as per standard specification

Supply and fixing in position of double leaf anodised aluminium glazed main door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with std.quality hydraulic floor spring, automatic door closure, rubber beedings, hinges, handle, etc., with 5.50mm thick sun cool glass, etc., complete,as per standard specification. Double leaf main door.

Supply and Fixing of steel door using 50x50x6mm for outer frame 25x25x6mm for shutter frame with MS flat 25x6mm 3 nos and for panels with 12mm thick one side laminated MDF duratuff exterior quality with bolts, washer, hinges 12mm dia tower bolt of 200x38x2.4mm at top and 150x38x2.4mm at bottom 1 No 250x16mm aldrop etc complete as per standard drawing and specn as well as per approval of Engineer at site (Size of the door D1 1500 X 2500mm single leaf)

Supply and fixing in position of anodised aluminium partially glazed double leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc, complete complete,as per standard specification for double leaf door

Supply and fixing in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc, complete complete,as per standard specification. Single leaf door

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete complete,as per standard specification.

Supplying and fixing of steel window partly openable, partly fixed with grill (Size of the window W2 1475 X 1475 mm as per IS 1038-1958 (1245 IS ) using 50x50x2mm and 25x25x2mm section glazing clips rubber beadings hinges handle 5 mm thick sun cool glass pannelling including cost of materials, lead, lift etc complete complete,as per standard specification.

Supply and fixing in position of anodized aluminium glazed sliding window as per ISS 1038-1958 (1245 ISS) using aluminium sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg / m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5.50mm thick sun cool glass panelling including cost of all materials, locking arrangements labour, lead, lift, etc., complete complete,as per standard specification.

supplying and fixing fire rated (two Houres) door as approved make including cost of all materials lead lift etc., complete complete,as per standard specification.

Supply and fixing of Aluminium ventilator with glazed louvers as per the direction of the department Engineer size 1575 X 975 mm including the cost of all materials, labour, lead, lift, T&P, all fittings etc complete complete,as per standard specification.(sample to be approved by dept Engr at site)

Supply and fixing of Aluminium ventilator with glazed louvers as per the direction of the site engineer size 750 X 450mm.including the cost of all materials, labour, lead, lift, T&P, all fittings etc complete.(sample to be approved by dept Engr at site) complete,as per standard specification

Supplying and fixing rolling shutter mechanically operated with gear box crank handle top cover of 18 gauge thick MS sheet anchoring rod, hasp & shackle to details including labour and materials for providing pockets to guides of rolling shutters making necessary holes in masonry or concrete 1:2:4 and making good, including one shop coat of anit-corrosive primer erectd in position (size 2500x2500mm) with high tension coils, type spring arrangements.as directed by department Engineer at site (SR.102 b) complete,as per standard specification

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift,labour including cost of binding wire, etc., complete as per standard specification.

Flooring with approved joint free vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete, as per standard specification.

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, labour, lead, lift, etc, complete as per standard specification

Providing and laying in position of ceramic acid resistant tiles over a bed of 20mm thick CM1:3 including pointig with acid resistant C.M for flooring in battery room, including cost of all materials, labour, lead, & lift, etc, complete as per standard specification.

Flooring with Eurocon tiles 20mm Tk. Of approved quality embedded in CM 1:3, and pointing with same coloured grout powder For portico including cost of cement, all materials,curing, labour, lead and lift etc., complete as per standard specification.

Supply and fixing granite stone colour including cost of all materials labour lead lift etc. Complete as per standard specification.

Plastering with CM 1:5, 12mm thick for interior and exterior faces of walls in all floors. including cost of all materials and scaffolding etc. Complete as per standard specification.

Plastering with CM 1:3, 12 mm thick for AC Exhaust Fan supports outside including cost of all materials and scaffolding etc. Complete as per standard specification.

Plastering with CM 1:3, 12mm thick to the exposed faces of RCC slabs, sides and soffits of beams in all floors with out chicken mesh including cost of all materials and scaffolding etc. complete,as per standard specification .

Plastering with CM 1:3, 12mm thick to the exposed faces of RCC slabs, sides and soffits of beams in all floors with chicken mesh including cost of all materials and scaffolding etc.complete,as per standard specification.

White washing two coats with white cement for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc,Complete as per standard specification .

Painting with patty finishing for inside walls with two coats of interior emulsion over a primer coat of approved colour and quality including cost of patty finishing ,cost of all matreials, lead and lift etc., complete as per standard specification .

Painting two coats acid proof paint of approved colour over a priming coat of white cement for battery room including cost of all materials, labour, lead, lift etc complete for interior walls as per standard specification .

Painting the outside walls with two coats of exterior emulsion over a primer coat of approved colour and quality including cost of all matreials, lead and lift etc., complete as per standard specification .

Weathering course over roof slab with brick jelly 20 mm size and lime mortar in the ratio of 32:12.5 to an average thickness of 80mm and to required slope and providing one course of pressed tiles of size 230x230x20 mm set in C.M 1:3 mixed with crude oil 10% by weight of cement and pointing with CM 1:3 mixed with crude oil. etc complete as per standard specification . (including water proofing treatment over roof to prevent leakage)

Plinth Protection all round the building for one metre width and 100mm thick with M10 concrete using 40 mm HGS and finishing surface with CM 1:3, 12mm thick.as directed by department Engineer at site. including cost of all materials and scaffolding etc. complete as per standard specification .

Damp proof course with cement mortor 1:3,20mm thick with water proofing compound including cost of all materials lead lift etc. Complete as per standard specification .

Painting with two coats of approved synthetic enamel paint over a primer coat to doors, windows and ventilators and rolling shutters. including cost of all materials and scaffolding etc. Complete as per standard specification.

Providing & fixing one mono-rail of length 3m with 2 Nos. chain pulley block of 5 tonnes capacity each as directed by Department Engineer at site. including cost of all materials and scaffolding etc. Complete as per standard specification .

Supply & fixing of 50 mm dia PVC pipes to sunshades,porch, roof slabs etc including cost of all materials ,all leads & lifts etc; complete as per standard specification .

Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [ MDF exterior grade] and 5mm thick machine frosted float glass 9modi, saint gobine or Equivalent using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, liftT&P etc. complete as per standard specification .

Supply ,fabrication, galvanising and erection of cable rack supports and ladder made of ISMB 150 RSJ and 50x50x6 / 5 mm angles which are to be welded to 10/8 mm plates including cost of all materials, lead, lift etc. complete.as directed by department Engineer at site as per standard specification .

Supplying and fixing musical quartz type wall clock of size 30x30cm of approved quality such as Ajantha/Seiko/Citizen etc including cost of transport fixing charges etc complete as per standard specification .

Supplying and fixing in position of sun control polyester flim, reflective type 75 microns thick (gareware or equivalent )including the cost of all materials, labour, lead, lift, T&P, etc. Complete as per standard specification .

Supplying and fixing black granite stone Engraved Foundation detail and year of construction fixing in wall at entrance, Digital wall clock 2 Nos, floor coir mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved make and quality including the cost of all materials, leads, lifts etc., complete as per standard specification .

Providing hilux / gypsum board(or)equalient board for false ceiling including supplying and fixing of board 10 mm thick using required size of Anodized Aluminium section, perforated gypsum board with all materials, labour, lift, T&Ps etc, including providing opening, out holes for fixing light and fan fittings wherever necsssary all including cost of all materials , leads, lift, etc., as directed by the Engineer in charge complete as per standard specification .

Providing gypsum board false ceiling with deck insulation using 50 mm thick including supplying and fixing of Gypsum board 12.5 mm thick using required size of Anodized Aluminium section, perforated gypsum board with all materials, labour, lift, T&Ps etc, including providing opening, out holes for fixing light and fan fittings wherever necsssary all including cost of all materials , leads, lift, etc., as directed by the Engineer in charge complete as per standard specification .

Supply of steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer and as per standard specification. (Main C. Room Building ).

S Type chair (Local rate)

Three drawer steel table

Steel side rack open type 4 self

Steel half bench

Revolving Chair

Operator Table 6'x5'

PVC Chair of reputed make

Providing rain water recharge bore holes by drilling of 300 mm dia bore hole 6.00 m depth and filling the holes with hard broken stone of size 40 m as directed by engineer at site including the cost of all materials, lead, lift, labour, T&P etc complete as per standard specification .

Supply,Fabrication & fixing of Name Board of vinyal sticker laminated in alco panel using 18 gauge M.S. sheet with outer in suitable angle and stiffener including cost of all materials,leads & lifts etc; complete as per standard specification .

Supplying and fixing the chequered plate of 8 mm thick for platform in Mono Rail area in the control room including the cost of all mateials, labour charges, leads, lifts, etc., complete as per standard specification .

Supplying and fixing the name / designation stickers in doors identifying the rooms including cost of material, labour etc. Complete as per standard specification .

Supplying and fixing of 100mm dia. stoneware pipe with open joint and covered with pan tiles including all cost of materails lead lift etc complete as per standard specification .

Supplying and fixing 110mm dia PVC.Bend including cost of materials, labour lead lift, etc. Complete as per standard specification .

Supplying and fixing 110mm dia PVC TEE including cost of materials, labour lead lift, etc. Complete as per standard specification .

Supplying and fixing at 110mm dia, best quality ventilating shaft 3.65m height with PVC cowl at top and fixing in poistion inlcuding cost of all materials, curing labour, leads and lits etc., complete as per standard specification .

Supplying and fixing in position of best quality mirror (22" x 16") with aluminium frame over wash basin including cost of all materials labour, lead, lift, etc. complete as directed by the engineer at site and as per standard specification .

Supply and fixing of wash basin of size 560x410mm white colour and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basin in the wall with GI/Alu. brackets and rag bolt and nut, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete as per standard specification .

Supplying and fixing in position white/colour glazed model floor mounted european water closet of the best quality and approved make with 100mm "p" or "s" trap connecting with ci pipe of 100mm dia/Pvc pipe of 110mm dia,double fl;apped rigid pvc black seat and seat cover with cp brass hinges including cost of white cement, cement for packing,supplying and fixing 10 litres capacity pvc/12.5 litres capacity porcelin low level flusingtank with a pair of ci brackets, etc., complete with all fittings,such as,15mm brass ball valve with polythene float with brass handle,unioncoupling connected by means of 40mm white pvc flush hand using indian adopter joint including all internet fittings, such as,15mm bras connections,15mm GM wheel valve,15mm brass nipple (2nos), 15mm nylon connection, TW plugs,screws and also giving necessary connection to the pvc pipe and painting the ci brackets with 2 coats of approved paint and painting the ci brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition,etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the executive engineer before use on works) Floor Fitting

Supplying and fixing in position IWC ORISSA PAN of size 580X420mm white glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc. complete as per standard specification .

Supplying and fixing in position Stainless Steel Multi Floor Trap of approved make and quality and size 100X75mm fixed over a bed of brick jelly lime concrete and finised with CM 1:3, and fixed stainless steel grating including the cost of all materials, labour, lead, lift, T&P etc. complete.as directed by department Engineer at site and as per standard specification .

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size (2 ft) and fixing the same over teak wood round block and soap tray (PVC) in bath room including cost of all materials lead lift labour etc complete as directed by department Engineer at site and as per standard specification .

Supplying and filling with 40mm metal as per standard specification inlcuding all cost of materials lead lift etc complete for dispersion trench as per standard specification .

Supplying ,laying and fixing in position of PVC high density 10 kg/cm2 pipe of best quality from approved manufacturer confirming to IS 4985-1968, 4984-1970 including cutting threading joining with necessary PVC specials including cost of all materials lead lift labour etc complete. as directed by department Engineer at site as per standard specification .

32mm dia pipe.

25mm dia pipe

Supplying and fixing in position of gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site and as per standard specification .

32mm dia

25mm dia

Providing and fixing of long body chromium plated heavy duty metal tap of 15/12mm size including cost of all materials, labour, etc., complete as per standard specification .

Supplying and fixing of PVC shower and Nickle control valve complete as per standard specification.

Supplying and fixing in position of ready made PVC water tank 1000 litre capacity, Sintex or equivalent make including cost of cover, with opening for inlet, outlet & over flow pipe, Transporting and cost of all materials, labour, lead, lift, etc. complete as per standard specification .

Supplying and fixing in position of 40mm GI pipe B class including cost of materials labour lead lift etc complete as per standard specification .

Supplying and fixing in position White glazed Flat back urinal - Size 455 x 350mm of approved make and quality [Parryware -Aquaseal urinal or equivalent] and with PVC pipe connection [Kohinoor], 32mm PVC waste pipe [Kohinoor], 12/15mm GM wheel valve ISI, fixing the urinal to the valve with necessary TW plugs, brass screws etc, connecting to the water main including the cost of all materials abour, lead, lift, T&P etc. complete. as directed by department Engineer at site and as per standard specification .

Supply & fixing marble partition of 25 mm thick 600 mm wide and 1200 mm high including necessary cement mortar with white cement concrete for urinals as directed by department Engineer at site and as per standard specification.

Providing inspection chamber with manhole cover including all cost of materails lead lift etc complete as per standard specification.

inspection chamber with manhole cover Cast iron 0.45x 0.45

inspection chamber with manhole cover Concrete (FRC ) 0.60 x 0.60 m

Supplying and fixing of 20Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (AC plug) [legrand MDS]/Hager (L&T ) make(SD 140) including cost of all materials &wiring etc complete as per standard specification including cost of all materials and labour charges .

Supply and run of 6 of 4 sqmm (SD 53) PVC unsheathed SC copper conductor cable of 1100V grade in suitable PVC rigid pipe in wall or ceiling with continous earth wire connection of 14 SWG TC wire for AC etc complete as per standard specification including cost of all materials and labour charges .

Supplying and fixing of down fall rod for ceiling fan including cost of material, labour, lead, lift etc complete as per standard specification including cost of all materials and labourcharges .

Supplying and fixing of down fall rod for twin mirror optic fittings including cost of material, labour, lead, lift etc complete as per standard specification including cost of all materials and labourcharges .

Supplying and fixing of 1200mm sweep AC ceiling fan with electronic requlator with 300mm down rod on the existing clamps(SD 107) of approved quality of Crompton/ Rally/ usha/bajaj including cost of all materials lead lift etc complete as per standard specification .

Supplying and fixing 450mm sweap AC exhaust fan light duty including cost of materials ,providing necessary holes with wall labour, fixing charges lead, lift etc. complete, as per standard specification .

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.(SD-234) as per standard specification including cost of all materials and labourcharges .

Supply and Fixing of light fitting LED NON-INTEGRATED WHITE 2 PIN 35W suitable for 220 V AC operation. PVC insulated copperwire of 1.5 sq.mm size in PVC pipes with 5 amps flush type switch including supply of all materials (including supply of light fittings for false ceiling with lamps)etc. complete.approved quality as per standard specification including cost of all materials and labourcharges .

Supply and Fixing and concealed wiring of LED Non Integrated, Master PLC 2 pin , cool white (13PLC8402P) with 25 Watts lamps for 220 AC operation with PVC insulated copper wire of 2.5 sq.mm size in PVC pipes with 5 amps flush type switch including supply of all materials (including supply of light fittings with lamps) etc. complete approved quality as per standard specification.

Supply and Fixing of LED Dulux T/E Plus, Non-Integrated Interna, 4pin, GX24q-4, 25 W lamps for 220 V AC operation.suitable for 220 V AC loperation (Reputed make approved by department Engineer at site) and as per standard specification .

Supply of sub-distribution board having 1 No. 63 A , TPN isolator as in comer and 3 Nos. MCB 32 A (Reputed make), DP HRC fuse as outgoing etc complete as per standard specification .

Supply of 60 Amps DP isolator as incoming and 4 Way TPN miniature circuit breaker 10 Nos 5 Amps as outgoing lighting distribution board etc complete as per standard specification .

Supply and Fixing main switch board shall be of indoor, industrial wall mounted, vermin proof, dust proof and suitable for 400/440 V, 3 phase, 4 wire system with bus bar chamber, interconnections to sub circuit MCBs and cable glands with the following ratings of INCOMER : 1 No. 200 Amps TPN Fuse switch (with HRC fuse).and outgoing circuits bus bars shall be rated for 4 pole 63 Amps Main Switch and 16 A MCB -10 Nos for each sub circuit complete with angle iron frame all labour ,lead and lift etc complete as per standard specification

Supply of power Distribution Board (incoming 63 A DP isolator - 1 No. and outgoing 15 A SPN Switch fuse -12 Nos.etc complete as per standard specification

Supply of 8 SWG copper conductor (Insulated Tinned copper wire) for distribution board and switch board earthing approved quality etc complete as per standard specification

Supply of MS BOX for peripheral lighting cable termination with suitable terminal blocks approved quality etc complete as per standard specification

Supply ,Erection and commissiong of 2 KV Inverter with suitable 220 V DC operation including 4 way double pole emergency distribution board having 1 NO (Reputed make) etc complete as per standard specification

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed multistrand Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (SD 23) etc complete as per standard specification including cost of all materials and labourcharges .

Wiring with 2 x 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm x 100 mm x 113 mm Steel switch box with 3 mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion, with suitable colour for concealed power plug point. (SD 40) etc complete as per standard specification including cost of all materials and labourcharges .

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall ,with 150x100x113mm Tw switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point etc complete as per standard specification including cost of all materials and labour charges (SD 38).

Concealed wiring for exhaust fans with PVC insulated copper wire of 2x 4 sq.mm size in suitable PVC rigid pipe with 5 amps flush type switch etc complete as per standard specification including cost of all materials and labour charges .

Concealed wiring for buzzers with two core PVC insulated copper wire of 1.50 sq.mm size in PVC pipe with 5 amps flush type button switches etc complete etc as per standard specification including cost of all materials and labour charges .

Fixing & commissioning of 80 Amps DP isolator as incoming 4 way miniature circuit breaker of 10 Amps as outgoing lighting distribution board etc. complete sample to be approved by department Engineer and as per standard specification including cost of all materials and labour charges .

Fixing & commissioning of sub distribution board having 1 No. 63 A, TPN isolator as incomer and 3 Nos. 63 A, DP HRC fuse as outgoing etc. complete sample to be approved by department Engineer and etc complete as per standard specification including cost of all materials and labour charges .

Fixing & commissioning of Lighting Switch Board with 1 No. 200 A, TPN fuse switch as incoming and 3 Nos. 63 A TPN, 2 Nos. 63A DP, 1 No. 32A DP switch fuse etc complete as per standard specification

Fixing & commissioning of Power Distribution Board (incomer:63A DP, isolator 1 No. DP switch fuse as outgoing 15A SPN switch fuse - 12 Nos. etc complete.sample to be approved by department Engineer etc complete as per standard specification

Supply and run of 4 of 4 sqmm PVC insulated Sc unsheathed copper conductor of 1100 V grade in suitable PVC pie concealed in wall and ceiling with continuous earth wire 14 SWG TC wire for power plug point on wall and ceiling with reputed make switch boxes etc. complete as per standard specification .

Erection of MS Box for peripheral lighting cable termination with suitable terminal blocks etc. complete.sample to be approved by department Engineer etc complete as per standard specification

Supply and run of 4 of 6 sqmm PVC insulated Sc unsheathed copper conductor of 1100 V grade in suitable PVC pipe concealed in wall and ceiling with continuous earth wire 14 SWG TC wire for power plug point on wall and ceiling with reputed make switch boxes etc complete as per standard specification .

Supply and fixing of ELCP including all cost of materiales lead lift etc complete as per standard specification .

supply and fixing Electical charger over switch including cost of all materials labour lead lift etc complete as per standard specification

Manufacture ,supplying and fixing of stainless steel hand rails for staircase using 50mm dia 304L Grade stainless steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 nos.of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100x100x6mm ms base plate encased in the base concrete.The rate is inclusive of the charges forcutting, bending, welding, grinding,polishing,conveyance,electrical charges,etc.complete

Supplying and fixing of Name Board letter in brass including cost of all materiales lead lift etc as directed by engineer and approval etc complete as per standard specification .

suppling and fixing of Vertical Blinds for all window with accessarious including cost of all materiales , labour, lead & lift etc complete as per standard specification .

Supply and fixing of weld mesh on brick wall for earthing purpose in bay control room including cost of all materials lead lift etc., complete as per standard specification .

Supplying and fixing in position aluminium partition fully glazed with 10mm thick plain glass using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals including cost of all materials, labour, lead, liftT&P etc. complete (For control room ) as per standard specification .

Supply and fixing of 50mm dia. 10Kg HDPE hose pipe (Delivery pipe) including cost of all materials, labour, lead, lift etc, complete as per standard specification .

Drilling 150 mm dia bore well in all classes of soil, rock cost inclusive of all machinery for bore operation, labour etc complete upto a depth of 150 m

Supplying and fixing for PVC casing pipe (with slots or without slots) in the drilled hole including jointing the pipes with paste etc. complete, including supplying and packing the annular space with pebbles of size and quality approved by the engineer at site etc complete as per standard specification.

165/168mm OD PVC pipe without slot holes

165/168mm OD PVC pipe with slot holes

Providing 2.5sqmm PVC copper cable of ISI quality including conveyance to site (Double length) for the leads including all materials, labour, lead, liftetc complete as per standard specification .

Providing 1/18 multistrand copper wire for water level indicator quality including cost of all materials, labour, lead, lift etc complete as per standard specification .

Cutting in all soils execept hard rock requiring blasting and Filling in low lying area with in a lead of 1.0 km by deploying earth moving machinery and tippers including benching,formation of level surface, breaking clods, sectioning, consolidation as per specification with power roller including all labour lead and lift etc complete as per standard specification

Supplying and spreading machine broken 25 mm HBG metal with necessary Antiweed treatment including cost of all material, labour, lead,lift etc complete as per standard specification

Supplying and filling with 1:1 quarry dust and 40mm metal for consolidated by power roller 10 T for road and bell mouth including cost of all materials, labour, well consolidation with power roller, lead, lift etc complete as per standard specification

PCC 1:2:4 mix for foundation using 12 to 20mm size HBG stone including cost of all materials, form work, centering and all leads, lifts etc., complete as per standard specification

M20 Grade Design Mix with minimum cement content of 320kg/cum using 12 to 20mm size HBG stone including cost of all materials, form work, centering and all leads, lifts etc., complete as per standard specification but excluding cost of reinforcement. Forcable duct wall, structure plinth/ pedestal ,column,rcc beam,cast in situ slab and precast slab.

cable duct wall

structure plinth/pedestal

Column

RCC beam

Cast in situ slab

Pre cast slab

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification.

Providing RCC heavy duty pipe (NP3) hume pipe including cost of collar pipe as directed by department engineer at site including cost of all materials leads and lifts etc. For cable crossing and storm water drainage as per standard specification.

600 mm dia

300 mm dia

Hire charges for JCB for levelling the site and uprooting and removing eucalyphtus/palmyrah stumps including cost of hire charges,fuel charges, all labour lead and lift etc. Complete as per standard specification.

Fixing in position of G.I angles for cable duct including cost of labour lead and lift charges etc complete as per standard specification.

Drilling suitable holes using power drilling machine to the required depth to fix the angle without disturbing the strength of the concrete including hire charges for drilling machine cable lead lift etc complete as per standard specification.

Course rubble masonry in CM 1:6 using course roubble stone and bond stone including cost of all materials, leads ,lift and curing etc complete. For compound wall ,drain side wall and retaining wall as per standard specification.

Flush Pointing with CM 1:3 including cost of all materials lead lift etc complete as per standard specification.

Supplying & fabricating and fixing in position of GI angle including cost of all materials labour,lead,lift etc complete as per standard specification.

Supplying hot dipped GI barbed wire 12 SWG 120 x 2.5 x 2 ply 4 pointed type 100 mm apart confirming to ISS 278/1978 (IOWA type) and Labour charges for tying barbed wires required rows horizantally in 'Y' portion and sprial binding at 0.5m interval including straightening, tying with GI binding wire including lead, lift,etc, complete as directed by department Engineer at site as per standard specification

Colour washing two coats of approved colour cement paint over one coat of priming using white cement including cost ncluding cost of all materials, labour, lead, lift etc complete for exterior faces of plinths, walls as per standard specification.

Supply with well gravel complying with standard specification for filling including cost of labour, lead, lift, watering consolidation etc., complete as per standard specification.

Removal of excavated earth and filling low lying area with in alead of 1.0 km and spreading wherever necessary as per standard specification etc. Complete

Removal of excavated boulders away from site with in alead of 1.0 km and spreading wherever necessary as per standard specification etc. Complete

Providing weep holes including cost of PVC pipes 75mm dia fixing them in position etc complete as per standard specification.

Providing opening for cable, Exhaust fan AC duct, water pipe line etc in brick work/RCC in building and retaining wall& cable duct including cost of machinaries labour etc complete as per standard specification.

For brick wall/RR masonry

for RCC wall

supplying and fixing PVC pipes of 6kg/cm² to a length of 300 to 450 mm for the cable entry in cable duct including cost of PVC pipes fixing charges etc complete as per standard specification.

75mm pvc pipe

110mm PVC pipe

Providing recharge pits for rain water harvesting including cost of excavation 1m to 2.m wide 2m depth back filled with boulders / gravel /coarse sand / etc as directed by department officials as per standard specification.

Supply,Fabricatingand fixing of M.S Gate by using angles,Square rods, M.S Plates including cost of all materials, labour charges for cutting, welding,and providing anchor cleats /Flats and placing in position, transport charges from work shop to site including paintig with red oxide one coat and enamel paint two coat as per standard specification.

Supply and fixing GI sheet in position of building all material including labour lead lift etc. Complete as per standard specification .

Supplying and erection of 2HP mono block 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Supplying and erection of 3HP air compresser 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper rod and 6' long 40mm dia GI pipe for earting and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete and placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Assembling of templates and fixing the foundaion bolts in position without any tilt until completion of concrete, checking the alignment for various structures including cost of template, labour,lead lifts etc complete as per standard specification. (Tower)

Assembling of templates and fixing the foundaion bolts in position without any tilt until completion of concrete, checking the alignment for various structures including cost of template, labour,lead lifts etc complete as per standard specification for equipment 765 KV & 400kV

Fabricating,galvanising & supplying of foundation bolts manufactured with EN 8 steel of various sizes as per drawing with 3 Nos GI nuts including welding a plate of size 100x100x12mm thick at the bottom of bolt including cost of materials,labour,lead lift,all inspection charges etc.complete ( Sample to be approved by Department Engineer at site ) forM80 1750 mm long, M56-1750mm long-lightning mast ,M42 -1300 MM long ,M36-1100mm long,M32-900mm long,M28-900mm long and other size foundation bolts

Fabrication &supply of tower parts ,booms including galvinising etc complete as per standard specificationincluding cost of materials,labour,lead lift,all inspection charges etc.complete ( Sample to be approved by Department Engineer at site ) as per standard specification

Mild STEEL

H T STEELS

Labour charges for Transport and erection of substation towers including tightening of bolts and nuts with washers,final checking before loading the structures, cost of all labour, T&P, lead and lift etc. Complete as per standard specification.

Supplying and transport of various size of ISI GI Bolt&Nut and washer as per IS standards and approved by competent authority before erection as per the requirement to site including cost of material lead lift labour etc complete as per standard specification .

Transporting and levelling of excavated earth to low lying area and consolidation with power roller within sub station premises including cost of labour,lead,lift etc complete as per standard specification.

Providing necessary pocket holes in transformer plinth for fixing accessories supports etc complete as per standard specification.

Supply and fixing of rails in transformer plinth as per design including cost of materials, fabrication,transporting and fixing charges etc complete as per standard specification.

Supply and Filling of pebbles of size 60 mm to 40 mm in soak pit around transformer plinth including cost of all materials,tranporting , all labour charges, lead and lift etc. Complete as per standard specification.

Supply and Labour charges for Transport and erection of gratings for reactor including desigining, cutting welding, tightening of bolts and nuts with washers finial checking before loading the metals cost of all labour T&p, lead and lift etc.complete as per standard specification.

Providing shoring and shuttering using CW planks and scantlings including cost of all materials labour lead lift etc. Complete as per standard specification.

Supplying and fixing the paver block of 65 mm thick to the foot path of the operational switches inside the yard including the cost of all materials, leads, fixing charges, lifts etc., complete as per standard specification.

Providing gardening arrangement, including cost of turf. plants, fertail soil,manur and labour charges of turfing, planting, excavation, filling, watering for one month etc complete as directed by the engineer incharge.

Description of Work / Item(s)

Amount

I.Auto Transformer/DT: Erection, Testing and commissioning of 500MVA single phae units of 7x500MVA Interconnection Transformer(including one no. single phase spare unit.) along with OLTC,Nitrogen injection system, and line materials required for formation of tertiary delta and neutral bus. (Panels for substitution arrangements of spare ICT also to be provided)

Erection, Testing and commissioning of 11 KV/433V , 1000KVA , Station Transformer (DT) (including structure)

Erection,Testing and commissioning of RMU with FRTU including laying HT cables between RMU to Station Transformer in cable trench and termination of cables and LT supply cable laying and necessary arrangements.Laying of FO communcation cables with necessary media converters for integrity FRTU in RMU with SAS

II.Reactor with all accessories in complete as per the direction of the field engineer

Erection, Testing and commissioning of 765 KV,110 MVAR, single phase Bus Reactor without NGR and Line Reactor with NGR ,(including one no. single phase spare unit for Line Reactor) along with Nitrogen injection system and line materials required for connectivity to NGR. (Panels for substitution arrangements of spare Line Reactor also to be provided)

III.Breakers with all accessories in complete as per the direction of the field engineer

Erection,Testing and commissioning of 765 KV SF6 circuit breakers with pre-insertion resistor with CSD, W/O PIR with CSD,With PIR with out CSD,(Complete shape with support structures) with ( control switching device) marshalling box & Terminal connectors using contractor's crane, including inter pole &, control cubical wiring, Evacuation, Gas filling, including supply of platform as directed by the field Engineer.

Erection Testing and commissioning of 420KV, 3150A, 63KA, 3-Phase SF6 circuit breakers with pre-insertion resistor wih CSD, W/O PIR with CSD,With PIR W/O CSD, (Complete shape with support structure) with marshlling box & Terminal connectors using contractor's crane, including inter pole &, control cubical wiring, Evacuation, Gas filling, providing man power fo testing whenever required including supply of platform as directed by the field Engineer.

CURRENT TRANSFORMERS

Erection of 765KV,Current Tansformer,3000A, 50 KA ,6 core single phase with support structures,accesories and junction box(1No Junction box for 3 CTs) Terminal connectors using contractor's crane as per the field condition, whenever required & as directed by the field Engineer

Erection of 420 KV,3000A, 63 KA, 6 core single phase current Transformer with support structure ,accesssories and Junction box.(1No Junction box for 3 CTs) Terminal connectors using contractor's crane as per the field condition, whenever required & as directed by the field Engineer

Erection, testing and commissioning of the following equipments: CAPACITANCE VOLTAGE TRANSFORMER

Erection of 765KV single phase CVTwith supprort structure ( 1 No Junction box for 3CVTs) Terminal connectors using contractor's crane as per the field condition, whenever required & as directed by the field Engineer

Erection of 400 KV single phase CVT with support structure ( 1 No Junction box for 3CVTs) connectors using contractor's crane as per the field condition, whenever required & as directed by the field Engineer

Erection of 624 KV LAS with support structure,monitor, Terminal connectors using contractor's crane as per the field condition, as directed by the field Engineer.

Erection of 390 KV Lightning arrester with supprort structure using contractor's crane as per the field condition, as directed by the field Engineer.

ISOLATORS

Erection of 765 KV,3150Amps,50KA, Isolator with double earth with Insulator with supprort structure.with terminal connector and internal wiring. , providing man power for testing whenever required & as directed by the field Engineer

Erection of 765 KV,3150Amps,50KA, Isolator with Single earth with Insulator with supprort structure.with terminal connector and internal wiring. , providing man power for testing whenever required & as directed by the field Engineer

Erection of 765 KV,3150Amps,50KA, Isolator(single phase) with double earth with Insulator with supprort structure.with terminal connector and internal wiring. , providing man power for testing whenever required & as directed by the field Engineer

Erection of 765 KV,3150Amps,50KA, Isolator(single phase) with Single earth with Insulator with supprort structure.with terminal connector and internal wiring. , providing man power for testing whenever required & as directed by the field Engineer

Erection of 765 KV,3150Amps,50KA, Isolator(single phase) without earth with Insulator with supprort structure.with terminal connector and internal wiring. , providing man power for testing whenever required & as directed by the field Engineer

Erection of 420 KV,3150 Amps.63KA, Isolator with double earth with Insulator with supprort structure.with terminal connector and internal wiring. , providing man power for testing whenever required & as directed by the field Engineer

Erection of 420 KV,3150 Amps.63KA, Isolator with Single earth with Insulator with supprort structure.with terminal connector and internal wiring. , providing man power for testing whenever required & as directed by the field Engineer

Erection of 420 KV,3150 Amps.63KA, Isolator with double earth with Insulator with supprort structure.with terminal connector and internal wiring. , providing man power for testing whenever required & as directed by the field Engineer

Erection of 420 KV,3150 Amps.63KA, Isolator with Single earth with Insulator with supprort structure.with terminal connector and internal wiring. , providing man power for testing whenever required & as directed by the field Engineer

Erection of 400 KV Bus earth switch (single phase) with Insulator with supprort structure.with terminal connector and internal wiring. , providing man power for testing whenever required & as directed by the field Engineer

Battery and Battery Charger

Labour charges for erection of 220V,535AH battery, and commissioning including assembling,acid filling,hourly SPG reading,3 cycle charging and 2 cycle discharging including all T&Ps,sundries such as white petrolleum jelly, distilled water cotton waste etc,. including supply and fixing 2Nos. HRC 100A Fuse carrier along with wooden/steel Board for every set of Battery complete for 765/400 bays.

Erection of 220V DC 100 A Battery chargers for 765/400 KV bays

Labour charges for erection of 48V, 1250AH battery, and commissioning including assembling,acid filling,hourly SPG reading,3 cycle charging and 2 cycle discharging including all T&Ps,sundries such as white petrolleum jelly, distilled water cotton waste etc,.complete for 765/400KV bays.

Erection of48 DC 250 A Battery chargers for 765/400KV bays

IRON AND STEEL

Fabrication,transporting of galvanised steel and erection of heavy section steel (RSJ 200/100 mm)for support structure & station supply 6 pole structure materials, including all consumables, labour etc.

Fabrication,transporting, galvanising and erection of Light section materials,including all consumables,labour etc.section wt.below14 KG /Mtr.

Erection of Bus bar and Strung bus Materials

Erection of 765 KV strung bus using Quadraple AAC Bull conductor, fixing Bolted type Tension fitting with Corona ring, (adjustable plate & spring on one side & fixed on another side), yoke plate (Top - adjustable, Bottom - fixed), double anchoring with fittings & accessories with 2 X 45 Disc Insulators & spacer (1 span of 3runs)

Erection of765 KV strung bus using TWIN AAC Bull conductor, fixing Bolted type Tension fitting with Corona ring, (adjustable plate & spring on one side & fixed on another side), yoke plate (Top - adjustable, Bottom - fixed), double anchring with fittings & accessories with 2 X 50 Disc Insulators & spacer (1Span of 3runs)

Erection of 400 KV strung bus using Quadraple Besmith conductor, fixing Bolted type Tension fitting with Corona ring, (adjustable plate & spring on one side & fixed on another side), yoke plate (Top - adjustable, Bottom - fixed), double anchring with fittings & accessories with 2 X 25 Disc Insulators & spacer (1Span of 3runs)

Erection of 400 KV strung bus using TWIN Bersimis conductor, fixing Bolted type Tension fitting with Corona ring, (adjustable plate & spring on one side & fixed on another side), yoke plate (Top - adjustable, Bottom - fixed), double anchring with fittings & accessories with 2 X 25 Disc Insulators & spacer (1Span of 3runs)

Erection of suspension arrangement for765KV with 45 Disc Insulators, Corona ring where ever necessary with fittings & accessories

Erection of 4.5" Aluminium bus with or without bend (For 765 KV).Providing joints where ever necessary as per field condition by suitable Al. welding

Erection of Support insulators for 765 KV with corona ring

Provision of 765kv /400KV jumpers & droppers with QUAD AAC/TWIN Bersimis

Erection of suspension arrangement for400KV with 25 Disc Insulators, Corona ring where ever necessary with fittings & accessories

Erection of 4" Aluminium bus with or without bend (For 400KV).Providing joints where ever necessary as per field condition by suitable Al. welding

Erection of Support insulators for 400 KV with corona ring

Erection of Earthing Materials

Earthing : Labour, Machinery and consumables for the Erection of Earthmat,earth connection,earth electrode,earthspike (including sharpening & painting of earth spike)

Providing 140/150 MM dia bore using power rig including the labour,lead,lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for providing double earth electrodes and supply and providing of 5Kg /Mtr depth of Bentonite powder(Sodium Bentonite)with 5% common Salt mixed with pure red earth as directed by the field Engineer (Red earth to be supplied by the contractor)

Labour for excavation and refilling of trench of ave. width of 0.3 M and ave. depth of 0.8 M for Earthmat and ave. depth of 0.4 M for laying of cable( including filled with river sand for a depth of 0.15m) below fixed yard level and of any size required by the field Engineer.Semi density rock soil

Supply and providing of 450-600 mm dia, 300 mm height, 36 mm thick cement collar for identification of earth electrode location as directed by the field engineer.

Erection of Cable laying and panels

Erection of Cable trays in cable trench with minor transporting and alignment etc.,

Labour for erection of cable in duct/trench/clamping on structures - neat laying in the ducts with identification Aluminium tags in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer

Up to 8 Core

Above 8 Core

Labour charges for laying of 2 x 16 OR 2X35 Sq.mm. Ar. Cu.Control cable

Labour charges for laying of 2 x 35 Sq.mm Ar. Cu.Control cable

Labour charges for laying of LT U.G 4 X 25 Sq. mm and 4x120sq.mm Ar.Aluminium Cable (Each)

Labour charges for laying of LT UG cable 4 x 300 Sq.mm induct/trench providing Glands at both ends and terimination with necessary sockets as directed by the field engineer.

Providing cable gland of suitable size including removing insulation of cable and providing suitable holes as per field condition, wherever required & as directed by the Engineer including cost of double compression cable gland

Termination of cable core end including cost of cable socket, lug, ferrules, strap etc., as per cable schedule and as directed by the field Engineer for the equipments – Breaker, CT, CVT, Isolator panels etc.,.

Erection Testing and Commisioning of the following:

AC&DC Distribution panel and AC&DC boxes for kiosk including of 4 Nos. 48V DC/DB panel

Control and relay panel, Bus bar protection panel, Synchronising cum islanding panel.

Installation, Testing & commissioning of Control & protection Panels for one complete 400kv diameter(Line and Tie breaker) including system integration with SAS at remote end SS(Kayathar 400kV SS)

Erection, Testing and commissioning of complete SAS for 11nos 765KV bays & 12Nos 400KV Bays including Control & protection panels and all FO cables of SAS for 765KV/400KV AIS

laying testing and commissioning of FO cable with HDPE pipe for connectivity of kiosk to SAS

Erection, Testing and commissioning of DFR cum PMU cum TWFL system

Erection of AC junction box & DC interlock box

Installation, Testing & Commissioning of Programmable Digital Power Line Carrier Equipment Carrier Set as per Technical Specification

Erection, Testing & Commissioning of EPAX with Universal Slot Architecture wired for maximum capacity as per Technical Specification comprising the following: 1)1 no. MPSU 2) 1 no. CPU 3) Analog Card (for connecting 16 Subsribers ) 4) 1 no. E&M (for connecting 16 Trunks ) 5) 1 no. ISDN PRI/E1 card 6) VoIP - 8 Channels 7) Earthing

Erection, Testing & Commissioning of 765 KV, 1.0 mH, 3150 Amp Wave Trap with pedestal mounting assembly and supporting structure for pedestal mounting arrangement suitable for 765 KV hexa zebra conductor.

ERECTION OF DG SET

Erection of 500 KVA DG SET with Automatic Mains Failure (AMF) panel for Emergency AC Supply

Supply Erection of Yard Lighting Materials

Supply and Erection of 72 Watts LED fitting With BULB with fixture in the existing Structure / Towers with suitable clamps , wiring and testing for burning condition, including supply & erection of main switches for each other consumables necessary as directed by the field engineer.

Supply and erection of ISI mark 72 Watts LED for emergency lighting of control room fitting with fixture of reputed make (Philips,Crompton / reputed make ) providing two core cu cable from fitting to main switch including cost main switch,cable and all other consumables, testing for burning condition as directed by the Engineer

Supply and erection of 6 Mtrs. stepped, tubular yard light polewith single/ Doble fitting pipe arrangement , with 1 coat of Red oxide and 2 coat of Alu. paint, and all other consumables as directed by the Engineer

Supply of Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) M.S Sheet as per Drawing including the Supply ,Fabrication and Erection of Box fixing Flat using 50x8MSF (0.2mx1No), Supply and Painting of Primer ,first finish coat of aluminum paints on to the fixing flats as directed by the field engineer. The box shall be vermin proof,shall be provided with sturdy hinges,with provision for cable entry and locking arangements.Also the Box should be provided with a 25mm thick wooden piece(country wood) of size150x150sqmm , ISI mark 16/20A rewirable Porcelain Fuse carrier unit and good quality Bakelite 16A 4 way Strip connectors including its cost and other consumables such as fixing screws etc.

Miscelaneous Items

Labour charges for painting earth raisers by green enamel painting including cost of paint (Dulex, Asian & Berger preferred) & other consumables & as directed by the field engineer

Fabrication, supply and fixing of individual equipment board of size 750 X 450 out of 14 SWG (2MM) M.S.sheet and 25X25X3 M.S.angle as per drawing and as directed by the field engineer.

Fabrication,supply and providing of 600mm mean dia,300mm height,36mm thick cement collar and for earth electrode identification board of size 300X250 MM out of 14 SWG (2mm) M.S.Sheet and 12 mm dia M.S round as per drawing and as directed by the field engineer.

Supply and provision of 12/25x3mm flexible braided copper for electrical connection including the cost of suitable copper lugs for crimping of at both ends/any other purpose as directed by the field engineer.

Supply of Fire & Water stand of size 2000 mm (H) X 2600 mm (W) out of 60 X 60 x 8 mm G. I angle for frame, 125 X 65 mm mm G.I Channel for base 10 SWG G.I Sheet for hood & 8 Nos. hook & as directed by the Engineer

Supply of fire buckets 10 ltrs capacity made out of 26(0.46 mm)SWG MS Sheet painted with white & red enamel paint inside & outside respectively.Bottom of the bucket shall be U shaped,Outside of the bucket shall be written as "FIRE"in English/Tamil in white enamel paint

Supply of sand drum made of oil drum of size 580 mm dia. & 420 mm height with conical cover made out of tin sheet provided with handle & painted with white & red enamal paint in side & out side respectively and drum shall be written as Fire in English & Tamil in white enamel paint

Suplly and fabrication of eye bolt, grout bolt with suitable rod 20/22mm with proper threading and 2 nos MS Nuts & washer as directed by the field Engineer

1. Grout Bolt

2. Eye Bolt

Supply and fixing of LC / Key Board of size 1800X900X100 mm (Inner size) made out of 10mm Novapan Sheet with Glass doors,Lock with duplicate keys, Key Hocks and drawing of Electrical layout and details as directed by the field engineer.

Supply of Godrej make 6 lever Navtal lock with triplicate keys with ring & key token as directed by the Engineer

Supply and Erection of 11 KV,33kv Isolators onto the steel structures and correct alignment , including the cost of HD GI Bolts and nuts,stud bolts, wherever necessary, Consumables and lubricants etc,Supply and erection of Earthing Flat loops between all Isolator Bases and the ABS Booms,Boom T-joints, and ABS operating Handle earthing using 50 x 8 MSF of required lengths, Supply and Applying of one coat of Primer Redoxide paint and Two coats of Bus Green Enamel Paint on to the earth Flat loops as per the drawing and specification and as directed by the field engineer.

Supply and fixing of AC 3 phase 4 pole 415V ISI mark changeover switch of reputed make panel mounting such as SWITRON,SALZER,KAYCEE as required and directed by the field engineer.

i) 30 AMPS

ii) 60 AMPS

Labour charges for providing earthspike with GI pipe including fabrication of base frame, painting and fixing as per departmental specification including the cost of GI pipes m.s.flats, base angles,sundry items all T&Ps etc. complete

Supply and erection of Vinyl Sticker cutting/Printing on Vinyl Sticker/Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field engineer.

Labour charges for writting details in Finished Surface boards including cost of enamal paint (Dulex,Asian,Berger preferred) and other Condsumables as directed by the field Engineer

Labour charges for drawing layout and writing details in LC/Key board including cost of enamel paint (Dulex,Asian,Berger preferred) and Other consumables as directed by the field Engineer.

Labour charges for second finish coat of enamel Painting of bottom of sub station structure and panel bottom frame and wherever required including cost of paint (Dulex,Asian, Berger preferred) wherever required & as directed by the field Engineer

Fabrication, supply and fitting of AC junction box out of 14 SWG (2.00 MM)MS sheet where ever required as directed by field engineer. The box shall be vermin proof , shall have sturdy hinges provision for mounting MCB and MCCB detachable gland plates and locking arrangements including cost of all materials 500W x 250D x 600H

Labour charges for two coats of enamel painting in sub-station structures and panels and wherever required including the cost of Dulex,Asian,Berger paints and other consumables as directed by the field engineer.Caution: First Enamel coat included in Fabrication/supply

i) 200x100 RSJ Bottom pole

ii) Yard Light Pole Bottom

Labour charges for removing rust,primer coat first and second coat painting including backside and writing details in M.S boards/including cost of enamel paints (Dulex,Asian,Berger is preferred)and other consumables as directed by the field engineer.

Supply and erection of 3-4 mm thick PVC foam type board to be used for main equipment,slogan,battery name board & any other purpose of required sizes as directed by the field engineer.

Supply and erection of `B` Class GI pipe for extension of tandum /down pipe for AB Switches and for any other work as required by and as directed by field Engineer including cost of GI Pipe

a) 40mm dia

b) 50mm dia

Supply and fixing of MDS Make Industrial (outdoor)type 8 way 3 phase and neutral A.C Distribution boards(typed47508 RO) suitable for MDS make loadstar type MCB as directed by the field engineer

Supply and fixing of MDS Make Industrial (outdoor)type 8 way Single phase and neutral A.C Distribution boards(typed47508 RI) suitable for MDS make loadstar type MCB as directed by the field engineer

Supply and fixing of reputed MDS make 3 phase 4pole MCB of reputed make such as MDS,STANDARD,HAVELLS,SCHENIDER with ISI mark in panels/box for A.C/PT circuits wherever required as directed by the field engineer.

Supply and fixing of reputed MDS make 1 phase MCB of reputed make such as MDS,STANDARD,HAVELLS,SCHENIDER with ISI mark in panels/box for A.C/PT circuits wherever required as directed by the field engineer.

Supply and fixing of Hylem board 10 mm thick for fixing of fuse units wherever required as directed by the field engineer.

Supply & fixing of ISI mark bakelite HRC/rewireable fuse holder in panels/boxes for AC/DC/PT circuits wherever required as directed by the field Engineer.

Supply & fixing of ISI mark porcelain rewirable fuse unit of reputed make in panels, boxes for AC Circuits wherever required as directed by the field Engineer

Supply & fixing of mounting channel suitable for CBTM 5 terminal block in pannel /box as required and as directed by the field Engineer.

Supply & fixing of nut type CBTM 5 Or equivalant terminal block in panel/box as required and as directed by the field Engineer

Supply and fixing of disconnected type terminal block suitable for CT Circuits in panels/box as required & as directed by the field Engineer

Fabrication and fixing of bell mouth Providing Jumper connection in the solid core/PT Isulators Including the cost of GI Pipe 50mm dia one meter & other consumables & as directed by the field Engineer.

Supply & fixing of ISI mark reputed make steel distribution panels/boxes alongwith MCBs/Terminals for testing,carrier equipments,AC/DC circuits wherever required as directed by the field Engineer.

Labour charges for cutting of chequered plate to the required size, painting with two coats of red oxide paint and enamel paint and placing them on cable trench in side control room including cost of all sundries ie,gas cylinder,cotton waste,T & P's,etc., but excluding the cost M.S. plate, paint and including unloading & loading of material at site

Erection of Lighting & Lightning Mast (LLM). with all accessories

Erection of Automatic fire alarm protection system with smoke detectors for control room,kiosks and cable gallery

Supply and Installation of Visual Monitoring system including Day/Night camera for viewing the operation of isolators.Monitoring of all other major equipments.Entrance door of substation,control room kiosk room etc.,

Erection Testing and commissioning of 136 KV, 40 KA, 3-Phase SF6 circuit breakers (Complete shape with support structure) with marshlling box & Terminal connectors using contractor's crane, including inter pole &, control cubical wiring, Evacuation,Gas filling,providing man power for testing whenever required including supply of platform as directed by the field Engineer.

Erection of 110 KV Lightning arrester with supprort structure using contractor's crane as per the field condition, as directed by the field Engineer.

Installing, testing and commissioning Environmental control unit which comprise of 2 Nos. two tonne capacity and type split A/C Air conditioners (1 Main + 1 standby) working inconjunction through a microprocessor based controller for desired operation.Each unit should have two compressors etc complete as per standard specification .

Installing, testing and commissioning two tonne capacity celing cassette type split A/C airconditioners including startor and single phase preventer confirming IS 1391 -1971 including cost of materials, stabilisers, labour, wiring etc. complete as per standard specification .

Installing, testing and commissioning two tonne capacity Floor standing type A/C airconditioners including startor and single phase preventer confirming IS 1391 -1971including cost of materials, stabilisers, labour, wiring etc.complete as per standard specification .

Installing, testing and commissioning of 5 KVA UPS ( for SAS System) as per directionn of Engineer in charge ,including cost of materials, all accessories, stands, labour, wiring etc. complete as per standard specification .

Installing, testing and commissioning of 25kWp LT Grid connected solar power plant with invertor at the rooftop of control room building as per direction of Engineer in charge ,including cost of materials, all accessories, stands, labour, wiring etc. complete as per standard specification .

Installing, testing and commissioning of 5 KVA UPS with battery ( for Emergency Lighting of control room) as per directionn of Engineer in charge, including cost of materials, all accessories, stands, labour, wiring etc. complete as per standard specification.

LARSEN AND TOUBRO LIMITED

Megha Engineering and Infrastructures Ltd

LARSEN AND TOUBRO LIMITED

LARSEN AND TOUBRO LIMITED

Megha Engineering and Infrastructures Ltd

Megha Engineering and Infrastructures Ltd

US Dollar

Japanese Yen

European Euro

US Dollar

Japanese Yen

European Euro

US Dollar

Japanese Yen

European Euro

US Dollar

Japanese Yen

European Euro

US Dollar

Japanese Yen

European Euro

Description of Work / Item(s)

11 KV/433 V ,1000KVA , Station Transformer( including structure) with suitably rated scada Ready RMU (RRLL Configuration) with FRTU including suitably rated HT cables between RMU to Station Transformer and termination kits and LT supply cable, accessories & arrangements.FO communcation cables with necessary media converters for integrity FRTU in RMU with SAS

II REACTOR: 765 KV,110 MVAR, Single phase Bus Reactor with Nitrogen injection fire protection system and line materials for connectivity.

765 KV,110 MVAR, Single phase, Line Reactor with NGR with Nitrogen injection fire protection system and line materials for connectivity to NGR.

III Breakers: 765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure , pre-insertion resistor and CSD

765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure without pre-insertion resistor with CSD

765 KV, 3150A ,50 KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH OUT CSD

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH CSD.

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure without pre-insertion resistor WITH CSD.

420 KV, 3150A ,63KA ,3PH Outdoor SF6 Breaker with support structure with pre-insertion resistor WITH OUT CSD.

IV Current Transformer: 765 KV single phase 6 core current Transformer, 3000A, 50 KA, 1 Sec. with support structure and accessories and junction box (1No Junction box for 3CTs)

420 KV,3000A, 63 KA, 6 core single phase current Transformer with support structure ,accesssories and Junction box. (1No Junction box for 3CTs)

V. CVT: 765KV single phase CVT with support structure (1 No Junction box for 3CVTs)

420 KV single phase CVT with support structure (1 No Junction box for 3CVTs)

VI .LAS: 624 KV Lightning arrester with support structure

390 KV Lightning arrester with support structure

VII . ISOLATORS : 765 KV,3150Amps,50 KA, Isolator with double earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator with single earth with Insulator with support structure.

765 KV,3150Amps,50 KA, Isolator (single phase)with double earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator (single phase)with single earth with Insulator with support structure.

765 KV,3150 Amps,50 KA, Isolator (single phase)without earth with Insulator with support structure.

420 KV,3150 Amps.63KA, Isolator with double earth with Insulator with support structure.

420 KV,3150 Amps,63KA, Isolator with single earth with Insulator with support structure. (2 Nos. isolators included for bus CVTs)

420 KV,3150 Amps.63KA, Isolator (single phase)with double earth with Insulator with support structure.

420 KV,3150 Amps,63KA, Isolator (single phase)with single earth with Insulator with support structure.

420KV ,3150 Amps,63KA, Isolator (single phase)without earth with Insulator with support structure.

VIII. BATTERY AND BATTERY CHARGER: 220 V 535 Amphere Hour (AH) complete battery Set with stand for 765 and 400KV bays.

220V, 100 Amps Battery charger for 765 and 400 KV bays

48V/1250Ah VRLA batteries

48 V 250 A Battery charger for 765 and 400 KV bays.

IX. BUS MATERIALS: 765 KV Solid core Insulator with corona ring

400 KV Solid core Insulator corona ring

11 KV 210 KN Anti fog Disc insulator

11 KV 160 KN Anti fog Disc insulator

4.5'' Aluminium BusBar

4.0'' Aluminium BusBar

AAC Bull conductor (765 KV Side)

Bersimis conductor(400KV side)

Bolted type Double Tension fitting with double anchoring Corona ring, suitable for 765 KV Quadraple AAC BULL 450 mm spacing

Bolted type Double Tension fitting with double anchoring Corona ring, suitable for400 KV Quadraple Besimis 450 mm spacing

X. POWER CONNECTOR : T Clamp for Twin BULL AAC to twin BULL AAC

T Clamp for Twin bersimis to twin bersimis

T Clamp for QUAD Bull AAC to QUAD bull AAC and Bersimis

T Clamp for QUAD BERSIMIS to QUAD BERSIMIS

T Clamp for 4.5'' Bus To QUAD/TWIN BULL AAC

T Clamp for 4.5'' Bus To QUAD/TWIN BESIMIS

" T " Clamp for Zebra to Zebra for line in dropper for LAS

Free end Clamp for 4.5" Bus Bar

Free end Clamp for 4" Bus Bar

T clamp for Zebra to Bus bar

Corona Bell for 4.5" Bus Bar

Corona Bell for 4.0 " Bus Bar

765 KV Spacer Clamp for QUAD AAC Bull 450 mm Spacing

400 KV Spacer Clamp for QUAD BESIMIS 450 mm Spacing

i) Switch end clamp for 4" Bus Bar

Joint Clamp for 100 mm Alu.BusBar welding sleeves

XI SUSPENSION FITTINGS: Bolted type Suspension fitting suitable for 765 KV Quad AAC BULL

Bolted type Suspension fitting suitable for 400 KV Quad Besimis

XII EARTHING: Supply of Earth mat ,auxiliary mat,earth electrode and vertical Earthing and earthflat of various sizes for equipment earthing

XIII. CONTROL CABLES: Copper cable 28 X 2.5 sq.mm Armoured

Copper cable 20 X 2.5 sq.mm Armoured

Copper cable 14 X 2.5 sq.mm Armoured

Copper cable 4 X 2.5 sq.mm Armoured

Copper cable 2 X 2.5 sq.mm Armoured

Copper cable 14 X 4 sq.mm Armoured

Copper cable 8 X 4 sq.mm Armoured

Copper cable 8 X 2.5 sq.mm Armoured

Copper cable 4 X 4 sq.mm Armoured

Copper cable 2 X 16 sq.mm Armoured

Copper cable 2 X 35 sq.mm Armoured

Aluminium cable 4 X 25 sq.mm Armoured

Aluminium cable 4 X120 sq.mm Armoured

Aluminium cable 4 X300 sq.mm Armoured

XIV. PANELS : AC panel for 765 ss

AC Distribution for Kiosk

DC Distribution Panel for 765ss

DC Distribution box for Kiosk

AC junction Box ( FRP)

DC interlock box (FRP)

Control & protection Panel for 765kv Line /Feeder

765 KV Bus bar protection panel

Control & protection Panel for 765kv Tie breaker bay

Control & protection Panel for 765Kv /400 KV ICT

Control & protection Panel for single phase spare 765Kv /400 KV ICT

Control & protection Panel for 765kv Bus reactor

Control & protection Panel for 765kv Line reactor

DFR cum PMU cum TWFL system complete with all devices for 2nos 765 KV Lines, DFR cum PMU system for 2nos 400KV Buses and common DFR workstation.

Synchronising cum Islanding Panel for 765KV Bays

400 KV Bus bar protection panel

Synchronising cum Islanding Panel for 400KV Bays

Control & protection Panel for 400kv Line /Feeder

48V DC/DB panel

Control & protection Panel for 400kv Tie breaker bay

Sub station Automation system for 765KV/400kv SS for 23 bays (11nos 765KV Bays, 12nos 400KV Bays)

Outdoor armoured 24Core FO Cable for connectivity of all kiosks with the SAS LAN and with station Auxiliary systems including all FODPs.

Spares for Control & protection panels and for SAS

Spares for DFR cum PMU cum TWFL equipment (Comprises 1no Acquisition unit and hardware modules of each type for Evaluation unit, Necessary accessories)

Control & protection Panel for 400kv Line for remote end station(Kayathar 400KV ss )

Control & protection Panel for 400kv Tie breaker bay

XV. IRON & STEEL: Galvanised Iron Heavy section steels (R.S. Joist 200 X 100 mm) For support structure and Station supply 6 pole structure

Galvanised Iron Light Sections Steels( Below 14.0 Kg /Mtr) such as MS Channels,MS Angles etc, For support struture and Station supply 6 pole structure

XVI FIRE FIGHTING EQUIPMENTS: Supply of mechanical foam type fire extinguisher trolly mounted 50L capacity with initial charge with complete set with hose and air induction nozzle and all accessories strictly conforming to latest issue of IS 13386/1992 with ISI certification

Supply of mechanical foam type portable 9 ltrs capacity fire extinguisher with initial charge complete with chromium plated GI Cap, High pressure nylon braided discharge hose, nozzle and all accessories strictly conforming to latest issue of IS 10204/2001 with ISI certification

Trolly mounted 25 KG Capacity(IS 10658 of 1999)

Portable 10 KG Capacity (IS 1271 of 1999)

Portable 5 Kg Capacity (IS 1271 of 1999)

Supply of Automatic fire protection system with smoke detectors for Control Room,Kiosks & Cable gallery

XVII. DG SET: 500 KVA, 433 V, 3 PhaseWith Automatic mains failure system (AMF) panel for emergency AC supply Diesel Generator Set with its accessories.

XVIII. OTHER ITEMS: Rubber Mat 2000X1000X10 mm

G I Earth Wire 10.9 mm(tower top earth spike to ground)

GI Ladder type Cable tray 2.5 m L, 0.6 m W thickness 2mm with coupling plate and bolt nuts

GI Ladder type Cable tray 2.5 m L, 0.45 m W thickness 2mm with coupling plate and bolt nuts

GI Ladder type Cable tray 2.5 m L, 0.3 m W thickness 2 mm with coupling plate and bolt nuts

Supply of gauntlets

Supply of discharge rod as required by the field engineer with teak wood &copper flats etc.,

Supply of earth rod as required by the field engineer with teak wood & copper flats etc.

First aid box

Telescopic GI ladder 30' Height

Control room Cable duct cross angles and Runner Channels for panel Erection complete set (to a weight range of 1.2 -- 1.25 Tonnes)/complete including 6mm Chequred plate

Flexible copper tape / rope for interlinking panel,earthing and for providing connectivity

XIX. TESTING INSTRUMENTS: Three phase fully automatic Numerical relay test kit with laptop computer

True RMS Digital Multimeter

6 channel Transformer DC Winding resistance measurement kit (50A DC)

Digital Mini Clamp Meter(for mA current measurement range 10mA - 300mA - 30 - 300A)

Hand held 1KV digital insulation tester(Rechargeable battery operated)

10 kV Digital Insulation Tester (Rechargeable battery operated)

Digital Earth Resistance Clamp on Meter

Online Earth Tester (Auto Earth Tester)

Thermovision Camera

Circuit Breaker Analyzer Kit for 765kV SS with 6channel Static and Dynamic Contact Resistance Measurement feature and laptop computer

SF6 Gas Analyser with calibrator

Automatic Transformer Turn Ratio Meter

Handheld Digital Clamp Meter(True RMS AC/DC currents upto 2000 A)

Primary Injection Kit - 2000A

Computerised CT/PT Analyser Testing Kit with laptop computer

SFRA testing kit

Fully Automatic Capacitance & Tan Delta Measurement kit

Automatic Battery Discharge kit

Transformer Oil BDV Test Set

Optical Time Domain Reflecto Meter (OTDR)

Optical Splicing Kit

Optical Source Meter

Optical Power Meter

Bit Error Meter (E1 Tester)

Ethernet Tester

Ferruling Machine

XX. YARD LIGHTING: Lighting & Lightning Mast (LLM) with 6No's 72 W LED Light of tall 30 mtrs with accessories.

GI wire No 8

Manufacturing and supply of LC / Key board of size 3000 mm, length 1500 mm height made out of 75 x 25 mm aluminium frame embeded with 12mm prelaminated wood particle board using screws rear 2 Nos. of plain glass of 5mm thick fixed with metal roller moving on aluminium channel should be provided on front withlocking arrangements. Glass pieces should be fastened on the glass shutter for opening and closing wall clamps made out of 6mm M.S.plate should be provided on top as per drawing and as directed by the field Engineer including cost of all materials

Manufacturing and supply of fire bucket of 10 Litrecapacity made out of 26 (0.46mm) SWG MS sheet; Painted with white and red enamel paint inside and out side respectively; Bottom of bucket shall be 'U' shaped ;outside of the bucket shall be written as FIRE in English / Tamil in white enamel paint inculding cost of all materials.

XXI PLCC AND EPAX ITEMS Supply of Programmable Digital Power Line Carrier Equipment Carrier Set as per Technical Specification

HF Coaxial Cable

Supply of EPAX with Universal Slot Architecture wired for maximum capacity as per Technical Specification comprising the following: 1)1 no. MPSU 2) 1 no. CPU 3) Analog Card (for connecting 16 Subsribers ) 4) 1 no. E&M (for connecting 16 Trunks ) 5) 1 no. ISDN PRI/E1 card 6) VoIP - 8 Channels 7) Earthing

Telephones

Telephone Cable

Supply of 765 KV, 1.0 mH, 3150 Amp Wave Trap with pedestal mounting assembly and supporting structure for pedestal mounting arrangement suitable for 765 KV hexa zebra conductor.

Coupling Device suitable for digital PLCC equipment for 765 KV line phase to phase coupling.

Digital tele-protection coupler ( 8 commands)

XXII MISCELLENEOUS ITEMS: Environmental control unit which comprise of 2 Nos. two tonne capacity and type split A/C Air conditioners (1 Main + 1 standby) working inconjunction through a microprocessor based controller for desired operation.Each unit should have two compressors etc complete as per standard specification .

Supply of two tonne capacity celing cassette type split A/C airconditioners including startor and single phase preventer confirming IS 1391 -1971 including cost of materials, stabilisers, labour, wiring etc. complete as per standard specification .

Supplying of two tonne capacity Floor standing type A/C airconditioners including startor and single phase preventer confirming IS 1391 -1971including cost of materials, stabilisers, labour, wiring etc.complete as per standard specification .

Supplying of 25kWp LT Grid connected solar power plant with invertor at the rooftop of control room building as per direction of Engineer in charge ,including cost of materials, all accessories, stands, labour, wiring etc. complete as per standard specification .

145Kv 40KA(outdoor) SF6 Breaker(1phase)

110kv LAS

11kv VC Breaker 1250A (outdoor)

11KV CT (400/200-1A)

11KV AB SWITCH With Insulators

11KV Potential transformer

5KVA UPS with battery for emergency lighting purpose in control room