ADDITIONAL ALTERATION IMPROVEMENT TO LIVING IN ACCN AT SNCO MESS AT AF STATION BAMRAULI

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings roof covering all as specified and directed.

Fixing only old Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering or fixed to wall with self tapping screws complete all as specified and directed.

S& F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering or fixed to wall with self tapping screws complete all as specified and directed.

S& F for Pre-painted galvalume aluminum zinc coating GI based Plain steel steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering or fixed to wall with self tapping screws complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed.

S & F for Anodised aluminium snap grid frame work for false ciling all as specified and directed ( Note :- Size of powder coated snap Grid 605 X 605mm) all as specified and directed.

Fixing only old premium sand textured finished mineral fibre acoustical ceiling tiles of size 600x600x16mm thick and placed on Anodised aluminium snap grid frame grid powder coated snap grid ceiling 605X605 module consisting of wall angle section19x19 mm and tee section with web height of 38mm and flange 15mm (colour white) (having rotary stitching on all T Section) with suspension system all as specified and directed.

S & F in position premium sand textured finished mineral fibre acoustical ceiling tiles of size 600x600x16mm thick and placed on Anodised aluminium snap grid frame grid powder coated snap grid ceiling 605X605 module consisting of wall angle section19x19 mm and tee section with web height of 38mm and flange 15mm (colour white) (having rotary stitching on all T Section) with suspension system as shown in sketch 'B' and as approved by GE Note : (i) Ceiling tiles shall be of make Armstrong brand "DUNE RH99 (Bevelled/Tegular) or equivalent brand of make as specified in Appendix 'B' to particular. (ii) Thickness og GI section shall not less be less than 3mm and shall be procured from the tile manufacturer. (iii) Section and hanging system shall have galvanising of minimum 90 grams per sqm and same make of tile. (iv) Work shall be executed by manufacturer's authorised vendor.

Dismantling timber scantlings, framed work in fillets, rails, posts, rafters, purlins, etc. over 40 sq. cm in section complete all as specified and directed.

M & L for Second class hard wood in scantlings, clean sawn in framed work complete complete all as specified and directed.

M & L for post construction Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. complete all as specified and directed.

M & L for post construction Anti Termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed.

M & L for post construction Anti Termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Dismantling of brick tiles laid bedded and pointed in any morter or brick tiles on roof , floors, channels, kerbs, aprons etc,cement concrete of any description & in any position not otherwise specifically provided for.

Demolition of Mud/mud puska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M & L For cutting out cracks to v-section in existing roofs or terraciv cleaning grouting with cement and sand slurry 1:3. complete all as specified and directed.

M & L For cutting grooves in brick wall 75mm wide and 65mm deep & shaping horizontal face of groove with cement . complete all as specified and directed.

M & L PCC 1:2:4 type B-1(using 20mm graded stone aggregate) for providing cement concrete as levelling and roof kerbs or mud stops, including finishing the surface with grinder to receive the acrylic based water proofing material, rounded or chamfered on edges etc complete all as specified and directed.

M & L for rendering or bedding layer 15mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with WPC 2% wt of cement inclduing finishing surfaces even and fair without using extra cement complete all as specified and directed.(Note: WPC will be measured and paid separately).

M & L for preparation of new surface and applying a coat of hot blown bitumen of grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm complete all as specified and directed.

M & L for APP based polymeric water proofing membrane minimum weight 3 Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer.complete all as specified and directed.

M & L for rendering or bedding layer 15mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with linesed oil @ 3% wt of cement inclduing finishing surfaces even and fair without using extra cement inclusive linesed oil complete all as specified and directed.

Supply only Linseed oil, raw and refined complete all as specified and directed.

M & L for Cement concrete tiles 250mm X 250mm X 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished complete all as specified and directed.

Demolition of PCC in ground floor n.exc15cm thickness below or above ground level complete all as specified and directed.

Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M & L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8 mm thick joint free (square/ rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

M & L for Non Skid ceramic coloured tiles 7 to 8 mm thick joint free (square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface 450x 300x7 mm thick joint less tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc. (1st quality/Premium Quality) complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) for plinth protection etc complete all as specified.

Supply only liquid integral water proofing compund. Make Dr Fixit/ Pidipfoor/ LW+.

M & L for sunkan portion incl demolation of existing PCC,WC,P/S Trap and removing the material out side MD land.& (a) preparation of RCC surface of sunken slab (floor) by brushing and cleaning throughly with water (b) application of two coats of poly urethane based chemical treatment (as per manufracture instruction DR FIXIT/FOSROC/CICO/STP) (c) 15 mm thick (1:4) plaster over chemical coating incl finished even & smooth without using extra cement all as directed. NOTE:- 1. continuty with cementitious water treatmentbeyond sunken portion in toilet shall be maintained.

M & L for cement concrete type E2 1:5:10 (40mm graded stone aggregate) as lean concrete in filling / Mass concrete complete all as specified and directed

Demolition to reinforced cement concrete of roofs, floors ( other than ground floors ) beams staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M & L formwork to soffits and suspended slabs such as roof slabs floor slabs landings and similar work not exceeding 200mm thick (horizontal or sloping )

S & F Mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M & L reinforced Cement concrete (1:2:4) type B-1, ( 20 mm graded aggregate ) as in chajjas/roof projection/Rcc railing repairs as in similar wk complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

M & L for Brickwork with subclass "B" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of using class designation 100 of bricks in lieu of 75 all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M & L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M & L for 15mm thick rendering in CM 1:4 on fair faces of brick work, cement surfaces finished even and fair without using extra cement complete all as specified and directed

S & F elevation tiles in vertical surfaces 300X450X10mm/300X600X10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match rendering 10 mm thick in CM 1:4 on vertical faces as in backing coat all as specified and directed.

M & L for preparation of new plaster surfaces of walls and applying two coats of oil bound distemper over 1.5 mm wall care putty complete all as specified and directed by Eng-in-Charge.

M & L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls complete all as specified and directed.

M & L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper over over a 1.5 mm wall care putty complete all as specified and directed by Eng-in-Charge.

M & L for complete removal of existing treatment on ceiling surface and applying two coat of Oil bound distemper over a 1.5 mm wall care putty complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls complete all as specified and directed.

M & L for Complete removal of existing finishes on wall and applying two coats of plastic enannel paint over a coat of primer including 1.5 mm wall care putty with spray painting machine complete all as specified and directed.

M & L Preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed.

M & L for preparation of old wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregates) as in roof kerbs, Chajja of window/ventilator or mud stops, rounded or chamfered on top of chajja & side edges of surfaces upto the height of 7.00 mtr etc complete all as specified and directed. { The rate is deemed to be inclusive of scaffolding/form work }

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

S & F for Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S & F for Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M & L for Solid PVC Frame for door,kitchen cabinet,cupboard of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S & F Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S & F Second class hardwood Flush shutters 35mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style)both side prelam pvc sheet of decortive choice consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F steel window with side hung shutter (mosquito proof ) with box type hinge, steel peg stay, lugs, handles, without glazing bars complete including one shop coat of red oxide primer.

S & F steel window with side hung shutter ( glazed) including box type hinges, steel handle, peg stay lugs complete with glazing bars and painted with one soap coat of red oxide primer.

S & F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S & F in repair 4mm thick Figured glass, pin head type in squares in n exc 0.5 sq.m in each pane complete all as specified and directed.

M & L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0. complete all as spesified and directed .

M & L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for PCC 1:3:6 type C-0 using 12.5 mm granted stone aggregate as hold fast/filling in pressed steel frame complete all as specified and directed

S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as spesified and directed .

S & F 300 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as spesified and directed .

S & F 250 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as spesified and directed .

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.complete all as spesified and directed .

S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised.complete all as spesified and directed .

S & F 200 mm long Aluminium anodised barrel tower bolts of extruded section.complete all as spesified and directed .

S & F for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spesified and directed .

S & F for 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as spesified and directed .

Supply and fixing of rubber beading door seal 40x 5mm strip in bottom of door complete all as specified and directed.

S & F in repair fancy type decorated Stainless Steel curtain hanging rods 20 mm dia,and fixed to stainless steel bracket for hanging curtain complete all as specified and directed.

S & F Stainless Steel brackets having screw for tighting of curtain rod of 20mm dia for fixing of curtain rod, complete all as specified and directed.

S & F Stainless Steel bright color decorative corner/end cap for Curtain rod complete all as secified and directed.

S & F stainless steel peg set of six with base plate and fixed to wall/door with rawal pugs/ s/s screw all as specified and directed.

S & F Vitreous China wash basin, flat back, size 450 X 300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets.

S & F Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm -45gms /40mm - 60 gms waste pipe of 40mm dia suitable for WHB, kitchen sink complete all as specifed and directed

S & F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed .

S & F CP vitreous china soap dish fancy type complete all as specifed and directed.

S & F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed.

S & F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

S & F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.

S & F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

S & F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S & F trap set complete all as specified and directed.

S & F vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S & F plastic pedestal pattern seat cover with flat bottom and cover and MS chormium plated hanging type device all as specified and directed.

S & F CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed

S & F Vitreous China Urinal, Half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S & F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flush ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

S & F in repair rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed.

S & F in repair rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed.

S & F ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and as directed.

S& F in repair Stop valves/Gate valves 25 mm dia cast copper alloy,screwed down, high pressure with crutch or butterfly handel, screwed both ends for iron pipe or for unions and fixed.complete all as specified and directed.

Taking up or down old steel tubing 15 mm dia complete all as specified and directed.

Taking up or down old steel tubing 20 mm dia complete all as specified and directed.

Refixing old 15 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

Refixing old 20 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

S & F 15 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including taking up or down old steel tube complete all as specified and directed.

S & F 20 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including taking up or down old steel tube complete all as specified and directed.

Dismantling of cast iron or renforced drain pipe 100mm/75mm dia of any description complete all as specified and directed.

S & F Cast iron soil, waste and vent pipe100 mm dia in any length with or without ear, with cement joint, laid in trenches or in wall complete all as specified.

S & F 100 mm cast iron sanitary connection socket to fit wc out let complete all as specified and directed.

S & F 100 mm cast iron sanitary connection S branch with branch 370 to 450 mm long excluding joint complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F of 75 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F PVC SWR (110) bends any radius comlete all as specified and directed.

S & F 75 mm PVC (SWR) junction single, (singl T ) (equal or unequal ), ordinary or inverted ( spigot or socket type ) or with paralle oval access doors branches .complete all as specified and directed.

S& F 110 mm PVC (SWR) vent cowl. Complete all as specified and directed.

M & L 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M & L PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified directed.

S & F stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 100mm complet all as specified and directed.

S & F stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 75 mm complet all as specified and directed.

M & L for LLDPE Septic tank for 25 users desinged to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc, all as specified and directed by Engr-in-Charge.

Soakage well excavation in any type of soil, foundation in PCC 1:3:6, walls are honey combed masonary with top ring of m25 concrete including intercepting chamber nd screen chamber made of brick masonary in CM, RCC slab in M25 / SFRC cover, inter connecting pipes of RCC/DWC complete with filled with brick bats of size 1.8 mtr dia x 3.0 Mtr effective depth all as specified and directed by Engr-in-Charge as shown on drawing CELZ/TD/576 sheet 1/2,2/2

M & L for brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6M mean radius, built in cement mortar 1:6 complete all as specified and directed

M & L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

Supply only liquid integral water proofing compund. Make Dr Fixit Pidiproof LW+.

M & L PCC (1:4:8) type D2 using 40mm stone agg as in sub base of flooring / fdn of wall etc complete all as specified

M & L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching, bed block, cills like including weathering and slightly rounded etc including form work complete all specified and directed.

Pre-cast cement concrete type B-1 (1:2:4) (using 20mm graded aggregate) as in drain cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed.

S & F Mild steel round bars 8mm dia and over, cut to length, bent to shape required, including ranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250)Part- I quality-A orFe 290 (Gde -E-165 ) complete all as specified and directed.

Demolition and breaking up drain pipes 100mm (SWG/AC/PVC/NP) or reinforced concrete) set in cement mortar complete all as specified and directed. Note : (UNSV Pipe through away Low laying area)

Demolition and breaking up drain pipes 150 mm dia salt glazed ware, (SWG/AC/PVC/NP) or reinforced concrete) set in cement mortar complete all as specified and directed. Note : (UNSV Pipe through away Low laying area)

S & F Salt glazed stone ware (SGSW) grade 'A' pipes 100mm bore laid and jointed on concrete bed with testing complete all as specified and directed.

S & F Salt glazed stone ware (SGSW) grade 'A' pipes 150mm bore laid and jointed on concrete bed with testing complete all as specified and directed.

Concrete bed to drain pipe 100mm bore laid to falls including packing under & haunching against the sides of pipes after they are laid and tested, in cement concrete 1:3:6 type D-2 (using 40mm graded crushed stone aggregate).

Concrete bed to drain pipe 150mm bore laid to falls including packing under & haunching against the sides of pipes after they are laid and tested, in cement concrete 1:3:6 type D-2 (using 40mm graded crushed stone aggregate).

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLHS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the One light/fan/bellpoint controlled by one switch single pole one way

All as per item 142 above here-in-before but one 3 pin 6 amp switch socket out let independent .

All as per item 142 above here-in-before but one 3 pin 6 amps socket outlet on the same board with other switch complete .

All as per item 142 above here-in-before but using 02 Nos. 2.5 sq mm size for main cable and 01 No.2.5 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board.

Supply and fix switch modular flush 6A single pole one way ISI marked

Supply and fix modular sockets 6 Amp 2 in 1 2/3 pin combined complete all as specified and directed by Engineer in charge.

Supply and fix switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked complete all as specified and directed by Engineer in charge.

Supply and fix modular sockets 16 Amp 2 in 1 3/5 pin combined all as specified and directed.

Supply and fixing Modular bell push flush type 5 Amps single pole 230 Volt white white finish complete all as specified and directed.

Supply and fix ceiling rose surface bakelite 60x25mm three terminal

Supply and Fix calling bell AC buzzer as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer in charge.

S & F LED batten extruded surface mounting fitting 2 feet long aluminium housing 10 watt input voltage 220 volt inbuilt LED and driver complete all as specified and as directed.

Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of making holes and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed.

Supply and fixing ceiling fans Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, with remote , BEE 5 star rating for energy saving, with remote , AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length incl taking down old & deposited to MES store yard complete all as spd & directed. Note : Cost of remote and remote cell included in this item

Supply and Fix in replacement of 30W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.

Supply and fix exhaust fan 300 mm sweep metalic body copper bound including fixing and louver shutter 240 volt 50 Htz. complete all as specified and directed.

M & L for taking down carefully existing ceiling fan/exhaust fan from site before B/R repair work, keeping in safe custody in store for greasing / oiling of ball bearings / bushes and making it for smooth and noise free operation and painting with Hi-Gloss synthetic enamel paint of approved shade by spray painting after filling cavities' and re-fixing after providing new fan clamp, nuts/bolts, washers, down rod as required and provision of 3 core copper flexible cable of size 1.0 Sqmm from ceiling rose to fan connector complete with writing of MES No. on the fan surface all as specified and directed.

S & F sheet metal enclosure with socket and plug top and MCB single pole and neutral enclosure with two Pin and earth plug and socket complete with one single pole MCB, 240 V, 25 Amp. complete all as specified and directed by Engineer in charge.

Supply & fix MCB DB SPN 4 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed.

Supply & fix MCB DB SPN 8 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed.

Supply and fix MCB, single pole and neutral, 230 volts, 32 Amp rating, 'C' series fixed in DBs catered here-in-before complete all as specified and directed by Engineer in charge.

Supply and fix MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge.

M & L for taking down carefully existing geyser of any type and cap from site before B/R repair work, keeping in safe custody in store for servicing and painting with Hi-Gloss synthetic enamel paint of approved shade by spray painting after filling cavities, and re-fixing with new hot and cold water connection as required incl provision of 3 core copper flexible cable of size 2.5 Sqmm complete with 15 Amps 3-pin plug top all as specified and directed.

S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe suitable size with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner tank should be glass line coated complete all as specified of capacity 25 ltrs having element 1.5/2 KW BEE star rating incl taking down old and deposted to MES store yard complete all as specified and directed by Engineer in charge.

Supply & fix in repair factory made epoxy powder coated Load line Distribution Board VTPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB any capacity as incomer and 6 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623. complete all as specified and directed by Engineer in charge.

Supply and fix in repair MCCB 100 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.

S & F Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLSH, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLSH 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

S & F Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLSH, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLSH 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 4 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

M & L earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate opt less attn. 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe light grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wire mesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100mm C/C both ways, with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SI Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Supply and fix bus bar box made out of 3mm CRCA sheet powder coated factory made out door type conforming to IP-65 canopy mounted protection with front and back hinges door with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof and painted comprising one incommer MCCB 125 Amp ,25KA four pole 04 Nos copper bus bar strip duly fixed horizontally step manner , indication lamp -03 Nos, duly fixed on angle iron frame grouted in PCC 1:2:4 Type B1 complete all as specified and directed.

Material, labour jointing & testing XLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core including making connection with suitable size of cable gland, aluminium lugs etc complete including taking down old U/S cable all as specified and directed.

Material, labour jointing & testing XLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 50 Sqmm 3.5 core including making connection with suitable size of cable gland, aluminium lugs etc complete including taking down old U/S cable all as specified and directed.

Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 Mtr deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 mm thick complete all as specified and directed.

Removal of excavated material to a distance not exc 50 Meter and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.

Supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning complete all as specified and dierected

Supplying, laying sub class 'B' bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.

Supply & Fixing in replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia complete all as specified and directed

M/s NSA Engineering Corporation

Agrawal Enterprises