Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.7 LAccepted-AOC OLD DAILY MARKET DIMAPUR 797 112 NAGALAND | PEREN | NAGALAND | 797112 | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹52.4 L+₹1.9 L (3.77%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹52.8 L+₹2.3 L (4.58%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹53.0 L+₹2.5 L (5.04%)Rejected-AOC | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹53.1 L+₹2.6 L (5.12%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
₹50.0 L
EMD Value
₹99,988
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR MAINT OF BR WKS IN BLDGS OF GP VI UNITS LOC AT RMS AND REPAIR MAINT CLEANING OF SEWAGE LINE DRAIN FOOT PATH HARD STANDING RMS AND REPAIR MAINT/ CLEANING OF SEWAGE LINE/ DRAIN/ FOOT PATH/ HARD STANDING
2023_MES_597451_1
8531/C/E8
Open Tender
Civil Works
Item Rate
270 days
RANGAPAHAR
Class D Category a(I) and a(ii)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹99,988
21 Jun 2023
22 May 2023
12 Jun 2023
22 May 2023
10 Jun 2023
5 Jun 2023
22 May 2023 - 29 May 2023
Amount
B/R PORTION Demolition of reed lathing single or double including battens and plaster or chicken wire lathing etc. complete all as specified and as directed.
Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position etc. complete all as specified and as directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc. complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:4 on one side of lathing surface finished even and smooth without using extra cement etc. complete all as specified and as directed.
M&L for rendering 12 mm thick in CM 1:6 on other side of lathing surface finished even and smooth without using extra cement etc. complete all as specified and as directed.
S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple etc. complete all as specified and as directed.
Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc. complete all as specified and as directed.
M&L Brick work with sub class B brick straight or curved on plan exc 6.00 m mean radious built in CM 1:6 complete all as specified and directed.
S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps etc. complete all as specified and as directed.
M&L for second class hardwood as in scantlings clean sawn timber fixed etc. complete all as specified and as directed.
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames etc. complete all as specified and as directed.
All as per item No. 11 here-in-above but exceeding 1.5 Sqm but not exceeding 4 Sqm each `etc. complete all as specified and as directed.
S&F size of frame 125 x 60mm Pressed steel frames 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.
S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and directed.
M/L 35mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified.
S&F Powder Coating aluminium colour frame for doors, windows, ventilators and partition etc with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
S&F Powder Coating aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.
S&F for Powder Coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.
M&L for sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane etc. complete all as specified and as directed.
S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples etc. complete all as specified and as directed.
S & F 100 size stainless steel butt hinges complete all as specified and directed.
Supply & Fixing 150 mm Aluminium handles, cast type, anodised etc. complete all as specified and as directed.
S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc. complete all as specified and as directed.
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed etc. complete all as specified and as directed.
M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint incl primer complete all as specified and directed.
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface complete all as specified and directed.
M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer on new surfaces in any tint etc. complete all as specified and as directed.
All as per item No. 27 here-in-before but applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces etc. complete all as specified and as directed.
M&L preparation of old surfaces of walls applying one coat of cement base paint etc complete all as specified and as directed.
M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oil bound distemper on walls.all as specified and directed
Demolition, Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.
M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) etc complete all as specified and as directed. complete all as specified and directed.
Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.
M&L for Virified Ceramic tiles (Light shade) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified.
All as per Item No 34 here-in-before but laid over screed bed of 15 mm thick 1:4 in vertical surface and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and as directed.
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and including 15mm thick CM (1:4) screed bed etc. complete all as specified and as directed.
All as per Item No 36 here-in-before but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4 , etc. complete all as specified and as directed.
M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10mm thick CM (1:4) backing coat etc. complete all as specified and as directed.
S & F,Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification complete all as specified and directed.
M&L for cement concrete type C2 (1:3:6) (40 mm graded stone agg) as in surface channels and drains etc. complete all as specified and as directed.
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds etc. complete all as specified and as directed.
Demolition of cement concrete in reinforced of any description and in any position not otherwise specifically provided, complete all as specified & directed.
M&L for PCC 1:4:8 type D-2 75 mm thick (40mm thick graded stone agg) as in sub base of floor etc. complete all as specified and as directed.
M & L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes etc. complete all as specified and as directed.
M & L for chequered cement concrete tiles of Size 25mm thick any description jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.
M&L TMT bars, 10 mm and over cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for precast cement concrete type B1 (1:2:4) (Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok complete all as specified and directed.
Taking up or down steel tubing and connections with all fittings for 15 mm bore GI tubing etc. complete all as specified and as directed.
Taking up or down steel tubing and connections with all fittings for 20 mm bore GI tubing etc. complete all as specified and as directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc. complete all as specified and as directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc. complete all as specified and as directed.
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc. complete all as specified and as directed.
M&L in repair for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed.
M&L in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe incl Urinal spreader complete all as specified and directed.
S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual fluash type complete all as specified (Make Cera, F1020106 or equivalent in Hindware/Parryware) complete all as specified and directed.
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed etc. complete all as specified and as directed.
S& F in repairs Pillar taps, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc. complete all as specified and as directed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure screwed both ends for iron pipes or for Unions and fixedetc. complete all as specified and as directed.
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers etc. complete all as specified and as directed.
S/F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, etc. complete all as specified and as directed.
Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc. complete all as specified and as directed.
S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) etc. complete all as specified and as directed.
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws etc. complete all as specified and as directed.
S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers etc. complete all as specified and as directed.
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc. complete all as specified and as directed.
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc. complete all as specified and as directed.
S&F of 110mm dia PVC (SWR) bends etc. complete all as specified and as directed.
S&F 75mm PVC(SWR) bends any radius with acess door etc. complete all as specified and as directed.
S&F of 75mm dia PVC (SWR) Vent cowl etc. complete all as specified and as directed.
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed etc. complete all as specified and as directed.
S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof etc. complete all as specified and as directed.
M&L dismantling water tank of exc 250 ltr and not exc 500ltr Capacity etc. complete all as specified and as directed.
S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut 20 mm dia complete screwed down for iron pipe of 20 mm dia etc. complete all as specified and as directed..
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc. complete all as specified and as directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping etc. complete all as specified and as directed.
Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement etc. complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc. complete all as specified and as directed.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints etc. complete all as specified and as directed.
Dismantling Plain corrugated steel sheeting, any gauge, thickness, including, Nanital or similar pattern roof covering complete all as specified and as directed.
Dismantling Plain corrugated Asbestos cement, any gauge, thickness, including, Nanital or similar pattern roof covering complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc. complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all specified and as directed
M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A etc complete all as specified and directed.
M & L for PCC 25mm thick type B-0, (1:2:4) (using 12.5 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20mm thick screed bed in CM 1:3 complete all as specified and directed.
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame etc. complete all as specified and as directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc. complete all as specified and as directed.
S&F 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
Demolition and breaking up drain pipes(salt glazed,stoneware, AC or reinforced concrete) set in cement 'mortar 150 mm dia fixed in position etc complete all as specified and as directed.
M&L DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid on 150 mm thick bed with excavation depth( 0.70m – 1.65 m) in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional etc complete all as specified and as directed.
Supply & fix in repair PVC (SWR) pipes single socketed in any length with rubber ring joints,but bore of pipe 150 mm dia laid in trenches or floors etc complete all as specified and as directed.
Supply & fix in repair PVC (SWR) pipes single socketed in any length with rubber ring joints,but bore of pipe 150 mm dia fixed to walls etc complete all as specified and as directed.
Supply and fixing as in replacement 100mm dia grating doom with waste hole of PTMT (minimum weight 25gms) complete all as specified and as directed by the Engr-in-Charge. Make: Prayag / Polytuf or equivalent as approved by GE.
Supply and fixing in repair 110/150 mm bore stack clamps out of 25mm by 3mm flat iron and round iron stays, including bolts and nuts and securing ends of stays to wall or roof for nominal bore etc complete all as specified and as directed.
S & F in repair 110mm dia PVC (SWR) branch piece, single (single Y equal or unequal) complete all as specified and directed.
All as per item No 99 herein before above but bore of pipe 75 mm dia etc complete all as specified and as directed.
S & F in repair 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S & F in repair PVC Gully trap 125/110mm, setting and jointing with solvent cement etc complete all as specified and as directed.
M & L for rendering in 10 mm thick in cement mortar1:6 on fair faces of brick work, finished even and smooth without using extra cement etc complete all as specified and as directed.
M&L for cement concrete (1:2:4)type B1 using 20 mm graded stone aggregatre as in copings including necessary formwork etc complete all as specified and as directed.
Material and labour for deformed steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking endsand binding with mild steelwire (annealed) n.less than 0.9mm dia etc complete all as specified and as directed.
All as per item No 105 herein before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed.
M&L for plain cement cement concrete (1:5:10 type E-2) using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and as directed.
Cleaning of Blockage IWC,EWC, Wash basin, gully trap, floor trap etc either by hand pump or by rodding or by any other means untill clear flow is observed all as specified and as directed by Engr in charge.
Carrying out opening of manholes,sewer line of any type and any depth removing the sludge/solid content from the manhole/sewer line by manual/ mechanical method and also cleaning the sewage line of any dia and at any depth either by water pressure or by any other flushing or roding and other suitable means at the discretion of the contractor at his own arrangements so as to remove the blockage and making the sewer lines and manhole fully functional to the entire satisfaction of Engineer-in-Charge also to remove the sludge/solid contents out of defence land including covering with a layer of earth and repositioning of the RCC/CI cover slab all as directed by the Engineer-in-Charge in SW Zone under. The complaint shall be cleared/rectified to the complete satisfaction of Engineer-in-Charge etc complete all as specified and as directed.
Desilting of septic tank/soakage pit of any size, type and any depth and removing the sludge/solid content from the septic tank/soakage pit by manual/ mechanical method or any other suitable means at the discretion of the contractor at his own arrangements and make the septic tank/soakage pit fully functional to the entire satisfaction of Engineer-in-Charge also to remove the sludge/solid contents out of defence land including covering with a layer of earth and repositioning of the RCC/CI cover slab all as directed by the Engineer-in-Charge in Sw Zone etc complete all as specified and as directed.
Cutting into exisiting manholes for connecting new drains, making good topipes and rendering ,cutting out existing benching and forming branch channel, halfround or 3/4 section in cement concrete1:2:4 type B smooth finished and reforming benching as required, internal dia of pipe150mm etc complete all as specified and as directed.
Excavating in trenches not exceeding 1.5m wide and n.exceeding 1.5m in depth; for foundation , etc not exceeding 10sq.m on plan and not exceeding 1.5m in depth and gettingout insoft/ loose soil etc complete all as specified and as directed.
Excavation over areas, n.exc 1.5m deep,and getting out for foundation, etc. soft/loose soil etc complete all as specified and as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm In soft/ loose soil etc complete all as specified and as directed.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point,in soils etc complete all as specified and as directed.
Supply and fixing as in replacement vitreous China wash down water closet pan (pedestal pattern) 110mm dia bore with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, with coloured PVC seat cover etc complete all as specified and as directed. Make: Parryware Cat No C0278 for water closet, Cat No C8071 EWC Standard for PVC seat cover or equivalent as approved by GE.
M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.
M&L for Brushing neat cement slurry with 3.0 Kg of cement per Sq meteretc complete all as specified and as directed.
Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
S&F in repairs door closer hydraulically operated, designation No. 03, universal type , suitable for door shutter of size 851 to 1000 mm in width of wt between 61 to 80 kg aluminium (die -cast) body complete all as specified and as directed.
Feroz Alam Khan
Kalim sons
M/S VIKASH TRADERS
commercial enterprises
M/S SANJAY ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .