REPAIR/REPLACEMENT OF JOINERY/PLASTERING, FLOORING, PLINTH PROTECTION, RAIN WATER PIPE, SANITARY APPLIANCES AND MISC B/R ITEMS OF WATER SUPPLY INSTALLATION UNDER GE (AF) ADM AREA GWALIOR.

Amount

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level, complete all as specified and as directed.

M&L PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) Nominal mix as in plinth protection (75 mm thick) laying in alternate ways cutting grooves and filling bitumen mastic mixed with sand and finished even and smooth without using extra cement all as specified.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) Nominal mix as in foundation filling,mass concrete etc complete all as specified.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block to be filled with fine sand and broomed etc complete all as specified and directed.

Dismantling of existing sunken interlocking pavers block of any description, size and pattern and refixing the same in any location for proper matching with existing surface after carrying out the necessary repair to the under layer complete all as specified and directed Note: (sand cushioning and sub base concrete will be measured and paid separetely)

M&L Precast cement concrete 1:3:6 type C1 (Using 20mm graded stne aggregate) for Kerb stone (Factory made) of size 20cm x10cmx30cm and set in cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified complete all as specified and as directed

Dismantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings complete all as specified & as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Dismantling unframed work of timber scantlings 40 sq. cm and over in section, in any position complete all as specified & as directed.

S&F Steel work in tubular trusses including special shapedwasher etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Excavating in post holes in soft/loose soil(or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc 50 m and making good surface in hard/dense soil complete all as specified & as directed.

M&L Cement concrete type B1 1:2:4 using (20mm graded stone aggregate) Nominal mix as in foundation for Posts and Struts all as specified and as directed

S&F,mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Dismantling fencing wire mesh/ barbed wire ,any type,complete all as specified and directed.

M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified and directed

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 30cm long and dia of neck n.exc 12mm, complete all as specified and directed

Supply only galvanised chain link MS Galvanised fencing any size or type as approved by Engr-in -charge etc, complete all as specified

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item No 23 above but except bricks

Demolition of reinforced cement concrete in ground floors etc not exceeding 15cm thickness as drain cover and similar works complete all as specified and as directed

M&L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for drain cover slab set and pointed in CM 1:6 including necessary formwork complete all as specified and as directed. Note : Reinforcement shall be measured & paid seprately.

S&F TMT bars 6 to 8 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing) complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) nominal mix as in base of flooring finished even and fair complete all as specified & directed.

M&L non skid-ceramic tiles joint free coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles over and including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed .

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

M&L for Heavy duty vitrified Parking tiles of size 600x600x16mm thick confirming to IS - 4457 set and jointed in neat cement slurry fixed by using spacers of 5 to 8mm gap and joints filled with epoxy complete as per manufacturer instructions and as specified.

M & L for Machine cut kota stone slab flooring 20-25 mm thick over and including cement screed base 20 mm thick cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in vertical or horizontal surface of floor and stair case and similar work complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25 mm thick on vertical surface such as riser of steps, skirting, dado etc set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 10mm thick rendering in cement mortar 1:3 complete all as spd and directed.

M&L Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of oil bound distemper, complete all as specified and directed.. Note : - The paint/Primer shall be applied with Hand Roller only.

M&L one coat of synthetic enamel paint over old painted surface of wood work of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed.

Description all as per item No-37 here in before but one coat of synthetic enamel paint on steel surface.

M&L Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed.

M&L Preparation of old decorated surfaces of Ceiling including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm including iron mongery each complete all as specified and directed.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed.

Taking down shutters of any description area exc 1 Sqm and n.exc 2Sqm each,complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg./ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note:For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile ditnensions on plus side shall be acceptable but no extra payment on this account shall be mde

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gnts) having minimum density of 650 kg/ cum and screw withdrawal strength of:soo N(Face) & 900 N (Edge), minim um compressive strength 50 N/ mm2 modulus of elasticity 850 N/ mm2 ad resistance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.Sscrews,all as per direction of Engineer­ In- Charge. (Note: stainless steel butt hinges shall be paid separately)

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Butt hinges, medium weight Stainless steel 100 mm size complete all as specified and as directed

S&F Stainless steel handles 150 mm long fancy type (Min weight of 150gm) complete all as specified and directed.

S&F Stainless steel tower bolts 150mm long (Min weight of 150gm) complete all as specified and directed.

S&F Stainless Steel sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long

Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces as on ceiling finished even and smooth without using extra cement.

M&L for 10mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing admixture as per manufacturer insructions finished other than fair complete all as specified and directed. Note : Water proofing liquid will be measured and paid seperately under respective item of Sch ‘A’.

Supply only integral liquid water proofing compound complete all as specified and directed.

M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L Preparation of newly plastered surfaces of wall and applying two coats of white wash, complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

S&F in repairs of PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessories to wall complete all as specified and directed.

S&F in repairs Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and 15mm bore CP, brass pillar Tap fancy type and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S&F in repairs rotational moulded polythene water storage tank of capacity 500 liters (Cylindrical /vertical with close top) double layer construction fixed in position incld dismantling of old PVC tanks complete all as specified and directed.

S&F in repairs rotational moulded polythene water storage tank of capacity 1000 liters (Cylindrical /vertical with close top) double layer construction fixed in position incld dismantling of old PVC tanks complete all as specified and directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, quarter turn screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. (Make : Jaguar/Cera/Hindware)

S & F in repair Bib taps, 15 mm dia, cast copper alloy, quarter turn, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. (Make : Jaguar/Cera/Hindware)

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.

S&F in repairs 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane in metal frames and hacking out old broken glass pane of any thickness and size complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed.

M&L in repairs for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane, size quantity or description from wooden frame/Steel frame complete all as directed by Engineer-in-Charge

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

All as per item No 70 above but 25mm bore.

S&F Galvanised Tubes medium grade of bore 20mm, with all fitting and fixed complete to walls and ceilings or laid in floors etc all as specified and as directed

S&F Galvanised Tubes medium grade of bore 25mm, with all fitting and fixed complete to walls and ceilings or laid in floors etc all as specified and as directed

Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed.

M&L for greasing and oiling of rolling shutters (manually operated) including replacement of small parts such as lock, damaged strip, if any, straightening of guide channel and other small articles to making it functional complete all as specified and directed.

M&L for greasing and oiling of rolling shutters (Gear box operated) including replacement of small parts such as lock, damaged strip, if any, straightening of guide channel and other small articles to making it functional complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth complete all as specified.

Demolition of cement concrete (unreinforced) in Roofs, floors (other than ground floors), tiles including dismantling & taking down any type of existing roof treatment (screed plaster, Brick tiles & tarfelt of any description) and removing to a distance exc. 1.5 km and n.exc. 5 Km from site complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in and levelling course etc over roof surface complete all as specified and as directed.

M&L for Surface preperation on new concrete surfaces by Mechanical means such as grinding.chasing open the construction joints, Small cracks. bug holes and pinholes should be opened up. cleaned and filled with polymer modified mortar or epoxy mortar made by adding sand into solvent based Epoxy primer complete as per manufacturer specifications. MAKE : Asian/Berger/Sika Note : - All corners and joints of the drainage pipes, channels etc, must be treated with Epoxy mortar Or Hybrid PU Sealant. Making of angle fillets all around the periphery of the wall with polymer modified mortar.

M&L for Surface preperation on old concrete surfaces by Mechanical means such as grinding.chasing open the construction joints, Small cracks. bug holes and pinholes should be opened up. cleaned and filled with polymer modified mortar or epoxy mortar made by adding sand into solvent based Epoxy primer complete as per manufacturer specifications. MAKE : Asian/Berger/Sika Note : - All corners and joints of the drainage pipes, channels etc, must be treated with Epoxy mortar Or Hybrid PU Sealant. Making of angle fillets all around the periphery of the wall with polymer modified mortar.

M&L for High build elastomeric waterproofing coating a water based polyurethane membrane. Prior application apply Water base epoxy primer with the consumption of 0.15-0.20 Kg/Sqm. Waterproofing shall be applied in 2- 3 coats with consumption of 2 Kg/Sqm sandwiched with 60 GSM geotextile to achieve a min. thickness of 1.1 mm - 1.2 mm, etc. complete all as per Manufacturer specifications. MAKE : Asian/Berger/Sika Note: The work shall be executed by the authorised applicator of manufacturer.

Sunil Traders (BID ID -3504691)

RADHA MADHAV CONSTRUCTIONS (BID ID -3505099)

M/s Raaj Construction Co. (BID ID -3498663)

R.B. ENTERPRISES (BID ID -3498318)

JAY PRAKASH SHARMA (BID ID -3505063)

M/s. Ravi and brothers (BID ID -3504437)

M/S YOGANSH CONSTRUCTION CO. (BID ID -3504392)

SHRI RAM CONSTRUCTION (BID ID -3504781)

M/s Gulshan and Brothers (BID ID -3505019)

lodhi builders (BID ID -3504838)

m/s vikash Engineers (BID ID -3505098)