CIVIL WORK

Amount

R&R work of Battery room & boundary wall situated in control room at 220KV, Sub-Station, BBMB, Dhulkote

Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand). Pb-CSR-Ref.-14.130-T/R.

Removing old paint with caustic soda solution and preparing surface. Pb-CSR-Ref.-16.35-T/R.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications. Pb-CSR-Ref.-16.73-T/R.

Painting with acid proof paint of approved brand and manufacture to give an even shade?two or more coats. Pb-CSR-Ref.-16.64-T/R.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In?Charge. (Glazing and paneling to be paid for separately) : (a) For fixed portion and chawkhats. Pb-CSR-Ref.-17.45(a)-T/R.

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug /neoprene gasket required. Pb-CSR-Ref.-17.45(b)-T/R.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre?laminated particle board with decorative lamination on Both side. Pb-CSR-Ref.-17.46(ii)-T/R.

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt). (ii) For shutter area above 0.50 sqm. Pb-CSR-Ref.-17.23(ii)-T/R.

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (B) 250mm x 16mm. Pb-CSR-Ref.-17.49(B)-T/R.

Providing & Fixing door floor spring double action of ISI specification for aluminum door/ steel doors. Pb-CSR-Ref.-18.33-T/R.

Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work. Pb-CSR-Ref.-18.48-T/R.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. Pb-CSR-Ref.-6.6-L/R.

Cement concrete 1:6:12 (b) With stone aggregate 40mm gauge. (i) mixing by manual means. Pb-CSR-Ref.-10.8(b)(i)-T/R.

Dismantling brick work tile, masonry or tile lining. (b) In cement. Pb-CSR-Ref.-8.5(b)-L/R.

Dismantling concrete. (a) Lime concrete, cement concrete of 1:6:12 or leaner mix. Pb-CSR-Ref.-8.6(a)-L/R.

Scraping (e) Bricks dismantled from brick work in lime or cement. Pb-CSR-Ref.-8.31(e)-L/R.

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth. Pb-CSR-Ref.-11.3(i)-T/R.

Damp proof course 2.5cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded. Pb-CSR-Ref.-10.28-T/R.

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. Pb-CSR-Ref.-11.4(i)-T/R.

12.5 mm thick cement plaster 1:5. Pb-CSR-Ref.-15.10-T/R.

115mm brick wall laid in cement, lime sand mortar 1:1:6 (one cement, one lime and Six sand) in super structure (up to 4 metre height) above plinth level. Pb-CSR-Ref.-11.22-T/R.

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade. Pb-CSR-Ref.-16.13-T/R.

Finishing walls with cement based water soluble exterior such as snowecem, robbiacem etc. on old work one coat to give an even shade. Pb-CSR-Ref.-16.14-T/R.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. Pb-CSR-Ref.-16.17-T/R.

LOADING AND UNLOADING: By Manual Means: Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal. Pb-CSR-Ref.-4.2-A-T/R.

CARRIAGE: Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth- 2.0 km. Pb-CSR-Ref.-5.2(i)-T/R.

RELIABLE ENGINEERS

THE MAHALAXMI CO-OP L&C SOCIETY LTD