Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹41.4 L+₹34,223 (0.83%)Rejected-Finance | L2 | Rejected-Finance Not Being lowest | |
| 3 | L3₹43.0 L+₹2.0 L (4.76%)Rejected-Finance | L3 | Rejected-Finance Not Being lowest | |
| 4 | L4₹46.0 L+₹4.9 L (12.0%)Rejected-Finance | L4 | Rejected-Finance Not Being lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
7 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-98/2021-2022 ADDN / ALTN TO BLDG NO P-21 P-95 P-97 P-1077 AT CHANDIMANDIR
2022_MES_515146_2
GE/CHM-98/2021-2022
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹98,000
Yes
23 Jun 2022
16 Apr 2022
14 May 2022
16 Apr 2022
7 May 2022
23 Apr 2022
60 days
Amount
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge.
Material and labour providing cement concrete type D2, 1:5:10 using 40 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed
Material and Labour brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.
Material and Labour Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.
Removal of excavated material to distance not exceeding 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed.
Material and labour reinforced cement concrete (M-25 , using 20mm graded crushed stone aggregate) as in beams, lintels over 1.5 metre span and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).
Material and labour form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified.
Material and labour for reinforced cement concrete (M-25 , using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, balconies, roofs, canopies shelves and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).
Use and waste, form work to flat surfaces of suspended slabs such as roof slab, floor slab, landing, shelves etc not exceeding 200mm thick, including edges in any position, rough finished surfaces, complete all as specified and directed.
Material and labour mild steel high strength deformed bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Material and Labour mild steel high strength deformed bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified & directed.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.
Material and labour 15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Material and labour Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately.
Material and labour for 15mm thick rendering in Cement and Sand mortar 1:4 over roof slab and sunken portion finished even and fair mixed with water proofing compound, complete all as specified. (NOTE : WPC will be measrued and paid separately)
Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.
Material and labour preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Material and labour applying two coats of oil bound distemper on new plastered wall surface over a coat of primer complete all as specified and directed.
Material and labour Three coats of white washing on new wall surfaces including preparation of complete all as specified and directed.
Material and labour Three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified and directed.
Material and labour complete removal of existing treatment of any type / descriptin viz distemper, white wash etc from plastered / un plastered surface of wall, chajjas, facia, cantilivers, RCC etc with mechanical means / grinder completely and applying two coats of cement base paint complete all as specified and directed.
Spreading and levelling soil in layers n exc. 25 cm thick and well ramming including watering as required complete, all as specified.
Material and labour hard core of gauge not exc 63 mm deposited spread and lavelled in layers n-exc 25 cm watered & rammed to a true surface with broken bricks complete all as specified.
Material and labour 75mm thick providing cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in sub base complete all as specified and as directed
Material and Labour 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in flooring, rough finished complete all as specified and directed.
Material and labour glazed ceramic tiles, coloured in vertical surface 350mm x 250mm x 7mm, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Material and labour non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Material and labour non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 Square metre but not exceeding 0.36 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Material and labour, plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 75mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.
Material and labour machine cut Kota Stone Slab flooring, 20 to 25mm thick, best quality (minimum size 58cm x 58cm) over and including cement screed bed 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, cutting, rubbing, grinding and polishing (mirror finish) complete all as specified and directed.
All as per serial item No 31 hereinbefore on skirting over and including 10mm screed layer in cement mortar 1:4 -ditto-
Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed
Supply and fix 4mm thick froasted glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Supply and fix Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed.
Supply and fix factory made powder coated aluminum frame for doors, windows, ventilator etc including all necessary fittings such as handles, hinges, locking arrangements, tower bolts, neoprene beading etc complete all as specified and directed. NOTE : (Glazing/ wire mesh shall be measured and paid separately) MAKE of aluminium sections : HINDALCO/JINDAL/ NALCO
Supply and fix powder coated (thickness of powder coating of any colour not less than 50 micron) aluminium door shutters, aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, handle 02 Nos in each door, hinges, aluminium snap beading, screws etc. complete all as required and directed by Engineer-in-Charge.
Supply and fix powder coated (thickness of powder coating of any colour not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bar made of s aluminium sections including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc. and fittings such as peg stays 150 mm long (1 No), hinges type B-21 100mm long, (2 No) suitable handle (1 No), etc, complete all as required and directed. Note : (i) Only weight of the aluminium sections shall be measured and paid. (ii) Glass panes and wire gauge shall be measured & paid separately under respective items. Design shall be approved from Engr-in-Charge as existing at site before fabrication and bulk order to the manufacturer.
Supply only stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, complete all as specified and directed.
Supply only 5mm thick tinted sheet glass in panels exc 0.5 Square metre in each pane, complete all as specified & directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc, and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.
Supply and fix, Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
Supply and fix, Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
Supply and fix bib taps brass, fancy type, short body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, complete all as specified and directed.
Supply and fix bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, complete all as specified and directed.
Material and labour CI floor trap 100mm dia with grating including jointing to waste pipe in run lead joint and setting in cement concrete type B-1 (1:2:4) complete all as specified and directed.
Supply and fix Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.
Supply and fix Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.
Supply and fix Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
Supply and fix Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 300 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.
Supply and fix PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
Supply and fixing solid PVC frame having profile 105mm x 60mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density 750, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
Supply and fix PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, complete all as specified & directed.
Supply and fix vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) and making good to the floor complete all as specified & directed by Engineer-in-charge.
Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm , complete all as specified and directed.
Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, complete all as specified in SSR Part-I and all as directed by Engineer-in-charge.
Supply and fixing soap dish, vitreous China white, approximate size 160x 160x90mm , complete all as specified and directed.
Excavation in post holes (or similar hole) each in hard & dense soil n.exc 0.50 cu m getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.
Supply and fix wire netting , size of mesh 25mm of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified and directed.
Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
Supply and fix for Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge
Supply and fix Pre-painted galvalume aluminum zinc coating (AZ-70) GI based corrugated steel sheet 0.50mm thick in any colour and patteren as approved by the GE of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Material and Labour two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.
Material and labour 20mm thick black granite slab (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed on steps, jambs, pillars, window-cills, cooking platforms and like and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 20mm thick in cement mortar 1:4 complete all as specified and directed.
Supply and fix Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 35mm thick, ISI marked complete all as specified and directed.
Supply and fix framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.
Supply and fix Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including fill of PCC 1:3:6 complete all as specified and directed.
Supply and fix glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood (Hollock) open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Supply and fix sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Material and labour for taking down rolling shutter of size exc 5sqm but n.exc 10 sqm complete all as specified and directed.
Cutting holes in to brick wall built in cement mortar for inserting hold fast etc the embedded portion exceeding one brick but n.exc two brick and making good to the disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20mm stone aggregate complete all as specified and directed.
Material and labour for Mild steel, plain, black sheet , thickness of sheet 1.6mm plain,in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
Supply and fix rolled mild steel framed work as in doors or gates of angle or other section conforming to Fe 290 (Gde -E-165 quality B) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing, complete all as specified & directed by Engineer-in-charge.
Supply and fix Butt hinges, cold rolled mild steel medium weight 120mm long for fixing to steel chowkhats complete all as specified & directed.
Supply and fixing cast iron or malleable cast ironhandles 150mm , cast type, stove enamelled black complete all as specified & directed.
Material and labour for cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed. (Cement concrete item shall be reinforced, where ordered. Reinforcement shall be measured and paid separately.
Material and labour for plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed.
Material and labour for salt- glazed stoneware drain pipe grade ‘A’ 150mm bore, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.
Material and labour for factory made RCC (Medium duty), M-35 reinforcement steel as per IS 456, pre cast man hole covers of size 1200mm x 600mm x 80mm with plain faces, including MS frame , set in position including demoliton of old unserviceable RCC cover complete and removal of debris complete all as specified.
Supply and fix, poly carbonate coloured hollow sheets as approved, 8mm thick as in roofs upto 5 mtr height including self tapping screws / form work / scafolding if required at site to complete the work including adequate size steel screws, washers, nuts, rubber strips/ rubber beading, silicon etc to fill up exisig holes etc aluminium strip/ flat etc as per manufacturer’s instructions, including dismantling of old sheet complete all as specified and directed. Make of sheet shall be approved by GE
Material and labour 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.
Material and labour, PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in padding over roof, mixed with water proofing compound, including dismantling of old PCC over roof complete all as specified and directed. NOTE : water proofing compound to be measured and paid separately
Mateial and labour applying wall care putty in over new plastered surfaces of bldg (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) by using necessary scafolding and safety arrangements including sand papering after filling the putty to make surface smooth and ready to receiving exterior painting and applying two coats of exterior emulsion paint over one coat of exterior wall primer complete all as specified and directed.
Material and labour preparation of old existing plastered /unplastered surface of bldg and applying two coats of exterior emulsion paint, over a coat of exterior primer including necessary scafolding and safety arrangements complete all as specified and directed
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including taking down old Mild steel/ wood railing complete all as specified and directed
Material and labour preparation of old plastered surfaces of walls with wire brush and washing rubbing down with water, applying two coat of wall care putty not less than 2mm thick over and including finishing walls with textured interior paint of required shade : (Two or more coats applied over and including priming coat of primer applied) complete all specified and directed.
Material and labour, 12mm thick toughened glass fixed in stair case railing including with stainless steel clamp/fasteners (including providing and fixing complete patch fittings) complete all as specified and directed
Material and labour point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit 20mm bore, terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original finishes surface and nothing extra shall be paid on this account.
All as per serial item 91 herein before but for socket outlet 3 pin 6 Amps on same board complete all as specified and directed
All as per serial item 91 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed
All as per serial item 91 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor
Supply & Fixing for switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed
Supply & Fixing for switch piano, flush type, 16 amps, 230 volts, single pole, one way (ISI marked) complete all as directed
Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 6 Amps flush type ISI marked all as specified and directed
Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 6/16 Amps flush type ISI marked all as specified and directed
Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.
Supply and fixing for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.
Supply and fixing for 9W LED BULB B22 WHITE all as specified and directed.
Supply & Fixing for LED CRCA batten with decorative end cap complete with retrofit T8 Polycarbonate / Glass Tube 20 watts capacity 4 feet long and white light and including connections from ceiling rose complete all as specified and directed.
Supply and fixing for bulk head fitting in engineering plastic housing with clear prismatic diffuser 6 watt capacity complete all as specified and directed.
Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way all as specified.
Supply & Fixing for MCB ,SPN, 240 volt, 40Amps, 10 KA , 'C' series characterstic including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge.
Supply & Fixing for MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge.
Supply and fixing exhaust fan 300mm sweep, 240 volt, 50 Hz, with louvers heavy duty metal body, 1350 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed. MAKE : Havell's / BAJAJ/ Crommpton / Khaitan
Cutting openings, through brick walls in round shape , for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish complete all as specified & directed by Engineer-in-charge.
Supply and fixing sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 4 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces after taking out old unserviceable sub main wiring complete by provding by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 4 sqmm and one single core of 04 sqmm cable along with PVC conduit shall be considered as 1 running metre.
Dhingra Brothers
KUNDRA CONSTRUCTIONS
VRIDHI ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .