15th FC Untied

Supply, Delivery & fixing of Precast M25 concrete planks (50 mm to 75 mm thickness) and reinforced H-posts 150 x 150 mm x 2000 mm to site, including Earthwork Excavation of pits 450 mmx 450 mm x 600 mm in all types of soils for post erection, and Foundation Erecting H-posts to perfect line, level, and plumb, including Labour, casting of foundation core using M20 grade concrete, Slotting precast planks into H-post grooves, sealing joints with rich cement mortar (1:3 mix) or elastomeric compound etc., complete for finished item of work as per Engineer incharge.

Drilling of 165mm dia borewell with power rig in all strata using PVC casing pipe of 180 mm dia as per specification upto hard strata, flushing of borewell with 100 ps @5 m interval for 15 minutes time to the vertical including c/c of all the materials etc., complete and conducting yield test at 5 m interval and collection of samples at 5 m interval to the required depth as recomended by the geologysts site plan and DTH Rig.

Supply and delivery of 180 mm dia PVC casing pipe 6 kg/sqcm

Supply and Transportation of 1.00 HP 15 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well.Makes: Flowell / Waterman / Ellen /Kirlosker / Narayani / Sai Varsha /Sterling / Duke / Samudra / Ajantha of 1.00 HP 15 Stage

Supply and Transportation of controlpanel for single phase submersiblemotors up to 3 HP @ 220V 50Hzoperating range between 80 to 240Vincluding supply and fixing of Direct -on - Line LK / SIEMENS / CROMPTONmake Volt meter and Ammeter withstarting and running capacitorsassembled with ISI mark contactors andfitted with ISI mark MCB etc.,complete. of 1 HP

Supply of 3 Core 1.5 Sqmm Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / KEI / LK / Pawancab of 1.5 Sqmm

Manufacture, Supply, delivery & Installation of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc.,complete(Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 Metres.) of OD 32 mm (12.5 kg/ sqcm) (SDR 11)

Manufacture, Supply, delivery & Installation of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc.,complete(Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 Metres.) of OD 32 mm (10.0 kg/ sqcm ) (SDR 11)

Supply, Transportation and fixing of ------------- 450 mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts. Of 150 mm dia galvanised bore cover

Supply of --------------- WPSC (Weather Proof Single Core) ISI mark Alluminium Wire. Makes : Polycab / GM / Million / VGuard/ Gold Medal / Kundancab / HPL / RPG / Nandicab / Nakoda / Payal /Finecab / Gemini / Vimal / Suncab / Stanjo / Rajnigandha / Orbit / Beljin / Pawancab of 6.0 Sqmm

S&F premium make CPVC Pipes of 22.20mm OD Pipe- SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees,couplers, connectors, solvent cement etc., and labour charges complete including cost andconveyance of all materials to site, all operational,incidental , labour charges,etc.complete for finished item of work as directedby Engineer-in-chargeof 22.20mm OD Pipe- SDR 13.5

S&F premium make CPVC Pipes of28.60mm OD Pipe- SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees,couplers, connectors, solvent cement etc., and labour charges complete including cost andconveyance of all materials to site, alloperational,incidental , labour charges,etc.complete for finished item of work as directedby Engineer-in-charge of 28.60mm OD Pipe- SDR 13.5

Providing & Placing on Terrace (at all floor levels)polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931

Supply, fabrication errection & fixing in position of MS tubular trusses including cost and conveyance of all material and all labour chages etc complete.

Supply of 25mm PPR Ball Valve conforming to DINStandards 8077/8092.

Supply of 40mm PPR Ball Valve conforming to DINStandards 8077/8092