Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹13.6 Laccepted-finance | accepted-finance |
Tender Value
Refer Docs
EMD Value
₹40,550
Closing Date
4 Mar 2026, 10:00 pmClosed
Directorate of Municipal Administration
N K Vishwanath
The work of installing new street light cables from Vaderahalli gate to KSRTC Bus Stand, which has been damaged in the limits of CMC Ramanagara.
DMA/2025-26/EL/WORK_INDENT55414
DMA/2025-26/EL/WORK_INDENT55414
Open
Electrical
Two Tender Document System(Two Cover)
DMA City Municipal Council Ramanagara
5 documents required · 5 mandatory
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing work
List of works for which tenders already submitted
Banker Details
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25, Satisfactorily completed (at least 50% of the contract value i.e 8.11 Lakhs), as prime contractor, at least any work
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25, Achieved in at least two financial year an average annual financial turnover of Rs. 16.22 lakhs (usually not less than the estimated cost under this contract).
Liquid assets and/or availability of credit facilities of not less than Rs. 4.866 lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.) (usually 30% of the amount of contract) in the format given in the bid document
Should be minimum Class IV P.W.D registered Civil contractor or Electrical Contractor
Bidder must compulsorily obtain and submit Site Inspection Report
₹500
₹40,550
19 Feb 2026
19 Feb 2026
5 Mar 2026
2 Mar 2026
The work of installing new street light cables from Vaderahalli gate to KSRTC Bus Stand, which has been damaged in the limits of CMC Ramanagara.
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 A
Supplying and fixing telescopic M.S.brack etfabricated by using 0.5 m length 4" dia telescopic M.S.pipe,with2"dia1.5m long M.S.Bracket and are welded with suitable angle,using 6mm thick M.S.sheet,grip...
Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 65 A
Supplying & fixing miniature circuit breakers on existing MCB distribution board susing necessary fixing materials and'C' Type curve, indicat or ON/OFF,energy cross-3 with Short circui tbreaking capac...
Supplying and fixing Microprocess or based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and was hers etc.,.) 3-120sec setting
Fabricating supplying and mounting MS box madeout.SWG suitable forfloor/wall mounting ,fully weather proof with provision for betterheatdissipation, provided with hingedfront cover, equipped with tamp...
Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.and M.S.Flat.with bolts, washersetc.,and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6...
1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995.3x25 + 1x25 + 1x16 Sqmm Street light (Insulated Messenger cum Neutral)
Stringing of 11 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size 3x95 Sqmm + 1x70 Sqmm with Insulated Messenger Wire
Suspension Clamp Assembly 16 to 70 Sqmm Bare Messenger (Exclusive of Pole Clamp and Eye Hook)
End Cap for 50/70 Sqmm
1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 PVC Wire - 2.5 SqmmWeight per 100 Mtr Coil: 1.8 Kg
Fabricating,supplying and erecting Swaged tubular Pole of height.m having three sections, and providing two coats of redoxide paint and finished with two coats of enamelled paint of approved quality a...
Painting of existing street light pole after scrapping the old paint and painted with suitable colour enamel/Silver paint including coping/footing of the pole. 8 m and above street light pole.
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1 55414.doc
Tender Document • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .