REPAIRS TO ROOF SHEET, FLOORING, PLASTERING, PLUMBING WORKS, STEEL CB AND OTHER ASSOCIATED WORKS IN CERTAIN JCOS AND ORS MD ACCN AT R LINES AND MAP ACCN UNDER AREA-III AT KAMPTEE

Amount

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete /sub base complete all as specified and directed.

M&L for 75mm thick cement concrete 1:2:4 type B2 (using 20mm graded stone aggregate) as in PCC path/ hard standing finished fair and even complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in padding, using water proofing liquid compound as per manufacturer's instructions laid to proper slope and gradient, finished even and smooth without using extra cement complete all as specified and directed. Note:- Water proofing liquid compound shall be measured and paid separately.

M&L for providing cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Supply only liquid integral water proofing admixture of Make: Pidilite or its equivalent complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30mm thick complete all as specified and directed. Note: Sand cushion will be measured and paid separately.

M&L for sand filling under cushion of paver blocks complete all as specified and directed.

M&L for chequred tiles 300 x 300 x 25mm thick, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment complete including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for providing cement concrete1:3:6 type C1 (using 20mm graded stone aggregate) as in copings, plinth courses including weathering, slightly rounded or chamfered angles and throating on edges complete all as specified and directed.

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering complete all as specified and as directed.

Dismantling of timber fillets, rails, posts, rafters, purlins under 40 Sq cm in section complete all as specified and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E- 250) quality A complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw all as per manufacturer instructions complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of any colour having tensile strength of 550 MPA as in ridges/ valley, fixed with and including self tapping screw all as per manufacturer instructions complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding, but not backing complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in white or color cement to match including rendering 10mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layers of cement mortar 1:6 for laying of floor finishes complete all as specified and directed.

All as per item no 18 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socket in any length with rubber joint fixed to wall as rain water pipe in any height fixing with necessary PVC clamps etc complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair PVC clamps for 110mm dia PVC pipes of any length with rubber joint fixed to wall for rain pipe of any height fixing with necessary screws bolts etc complete all as specified and directed.

S&F in repair pillar taps 15mm bore dia cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwd shank and fly nut screwd for iron pipes complete all as specified and directed.

S&F in repairs stop valve/ angle cock 15mm dia cast copper alloy, chromium plated fancy type, high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed complete all as specified and directed.

All as per item No 24 above but concealed type complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan Orissa pattern 580 x 440mm long with integral foot rest, S or P trap including connection to trap and to flushing pipe etc complete including making good to floor complete all as specified and directed.

S&F in repair vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and urinal spreader complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm white including coupling, waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed.

S&F chromium plated shower rose with or without swivel joints of 125mm dia including fixing to 15mm bore of pipe complete all as specified and directed.

S&F in repair health faucet of 15mm bore brass cromium plated including PVC pipe to connection GI tubing 15mm bore complete all as specified and directed. Make: Shakti cat No:SB 9101 or equivalent

S&F in repairs towel rail 20mm dia 600mm long of chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F in repairs 15mm dia bib tap cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia bib tap of PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm -90 gms) complete all as specified and directed.

S&F in repair 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.

S&F in repair 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs plastic water closet seat, back, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair corrugated waste pipe of size 32 x 800mm for kitchen sink and wash basin etc complete all as specified and directed. Make: Shakti Cat No SB-1327 or equivalent

S&F in repairs PTMT shelf 450mm long fixed to plugs with chromium plated brass screws complete all as specified and directed. Make: Shakti Cat No SB 1191 or equivalent

S&F in repairs 20mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and as directed.

S&F for fancy type curtain brackets approved quality fixed to wall with screws complete all as specified and directed.

S&F 32mm waste fittings, brass, chromium plated for glazedw are sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F GI tubing 25mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 ltr capacity, hoisted and fixed in position including PTMT ball valve of 20mm dia and top cover including dismantling of existing water tank as specified in SSR Part I complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltr capacity, hoisted and fixed in position including PTMT ball valve of 20mm dia and top cover including dismantling of existing water tank as specified in SSR Part I complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 2000 ltr capacity, hoisted and fixed in position including PTMT ball valve of 20mm dia and top cover including dismantling of existing water tank as specified in SSR Part I complete all as specified and directed.

S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm -210 Gms) complete all as specified and directed.

All as per item No 51 above but 25mm bore complete all as specified and directed.

S&F sinks with drainage board made of stainless steel thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm including waste pipe of 32mm dia complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of over all size 24 x 30 x 10 inch including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed. Make:- Shakti cat part No KR-554 or equivalent

S&F in repairs stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilators shutters complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillar but excuding ashalar facing etc complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plastering including roots of trees and trees any girth desription on brick or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete surfaces in CM 1:6, finished fair and even complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for preparation of plastered surfaces of wall & applying three coats of white wash complete all as specified and directed.

S&F in repairs 150mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F in repairs 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 300mm mild steel helical door spring ordinary rat tail rod including roller and roller plate complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

Taking down shutter of any description exc 2 Sqm each and removing from site complete all as specified and as directed.

S&F 0.63mm thick mild steel, plain black sheet covering to door chowkats (frames); cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

S&F 0.80mm thick mild steel, plain, blacksheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F 1.00mm thick mild steel, plain, blacksheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required complete all as specified and directed.

M&L for mild steel TMT round bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for locking arrangement of door conforming to Fe- 410-W (Gde E-250) or Fe-290 (Gde E-165) complete all as specified and directed.

S&F 75mm long but hinges, medium weight, cold rolled mild steel and fixed/ welded to frame complete all as specified and directed.

S&F mild steel mortice lock 4 levers, vertical type, size 75mm complete all as specified and directed.

S&F mild steel drawer handles flush drop (5 to 75mm grip) on 4 screw plate, including letting in complete all as specified and directed.

S&F flush shutters solid core construction with block board core and plywood face panels commercial type on both sides 30mm thickness complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 4mm thick moulded PVC sheet on the front face & 4mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC panelled door shutter 30mm thick, but wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening complete all as specified and directed.

S&F factory made solid PVC panelled door shutter 30mm thick (Style) consiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width struck inside with solvent cement for styles and palin colour PVC sheet for Top rail : panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style and rail with suitable PVC sheet beading and jointed together with solvent cement etc fixed with frame at site complete all as specified and directed.

S&F 100mm long mild steel medium weight cold rolled butt hinges and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F 150mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F 125mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/ steel frames glazed with putty or fixed with beads etc complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality not exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

All as per item No. 88 above but figured glass complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilators shutters complete all as specified and directed.

S&F in repairs 18/19mm thick prelaminated particle board, as in cupboard, palmet interior grade prelaminated one sides with decorative choice lamination other side balancing white lamination, fixed with screws to timber frame work / mild steel framing/ 6mm thick first class H/W leaping on bare edges complete all as specified and directed.

S&F in repairs continuous (piano) hinges, 30mm wide flap mild steel, bright finish or electrogalvanised complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preaparation of new steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.)[(-) Rs.73,950.00]

M/s DS Khekde

M/s M.G. Hargunani

Vishwakarma Engineering Works

M/s Jagdish Staioners and General Stores

Bidder Name

Vishwakarma Engineering Works

M/s DS Khekde

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

Varsha G Nagphase