SPL REPAIR TO ROAD FROM BHAGAT CHOWK TO CANTT RLY STN UNDER GE (SOUTH), MEERUT CANTT

Amount

M & L for preparing the existing black top surface with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose, dirt etc and material and labour for applying evenly a priming/tack coat with bituminous primer (paving bitumen VG-10) @ 5 Kg per 10 Sqm complete all specified and directed.

M & L for bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) stone chippings mixed with 5.5% of binder contents paving bitumen (VG-10) by weight of total mixed in hot mix plant, transported to site on tippers and laid with mechanical paver and rolled to a uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

M & L for cleaning the road surface from dirt, oil/ grease spots and foreign material etc and applying 2.50mm thick road marking strips (retro reflective) of white/ yellow colour using HOT Themplastic material by fully/ semi authomatic thermoplastic paint applicator machine fitted with profiles shoe, glass heads dispenser, propane tank heater and profile shoe heater driven by experienced operator complete all as specified and directed make of paint STP or Equvaliant as approved by GE.

S & F in repair speed breaker by providing rounded (of 17 meter radius) hump of 3.7 meter width and 0.1 meter height by providing and laying bituminous premixed asphaltic semi dence concrete 30mm thick consolidated thickness laid with machanical paver mixed with 5.5% of binder contant paving bituminous (VG-10) by weight of total mix rolled to uniform smooth surface with 8 to 10 tone power roller to required gradient all as specified and directed.

S & F in repair delinator made out of round MS Pipe heavy duty 3" dia and 3' long with seven bends of reflective tape HIP grade. Three red (2" x 6") and two white & two yellow (5" x 6") with one coat of steel primer and two coats of synthetic enamal paint including necessary execavation and earth work in any type of soil embeded in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) size of fixing block 250mmx250mmx250mm and covered with 1mm thick wire cage complete all as specified and directed. MAKE : D-2 of M/s SAPPHIRE Road Safety Products or equivalent as approved by GE.

S & F in reapair solar delinator made out of poly carbonate-clear UV resistant, Meash/ Pole height 1 meter, Powder coated (pole & mesh) : 40 microns with two rings of hip tape, reflective tape high intensive prismatic, solar panel of mono crystalline 4 volts/ 50mAH, battery - 1 x 1.2 volts, Ni mh-800 mAh, high temprature batteries, back up of 63 hours after full charging, led color- red, blue, yellow, white, green-4 leds, flashing blinking/ still : can be customized including installation and fixing with necessary excavation and earthwork in any type of soil, PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) size of fixing block 250mmx250mmx250mm complete all as specified and directed.

S & F in reapair Cat eyes ABS body material with scratch and abrasion resistane micro prismatic polycarbonate and ultrasonically welded lens of temperature resistant body and lens of size 90mmx100mmx17mm fixed on road with synthetic adhesive as per manufactures instructions to bear maximum load and highly reflective glass element are filled on both sides for night time visibility complete all as specified and directed (Make-3M/Avery/Slimsonate).

S & F solar cat eye aluminum alloy shell (100% water proofing design according to 65) of size 125mmx125mmx25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc all as specified and directed.

M & L for preparation of old pained concrete surfaces of any descripton, not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

S & F precast cement concrete solid block with PCC 1:2:4, Type B-1 (using 20mm graded aggregate) as in kerbs stone ex 10cm in width and setting in cement mortar 1:6, including demolitaion of old PCC of any description complete all as specified and directed.

M & L for preparation of new surfaces of concrete of any description and applying two coats of synthetic enemal paints over 10cm width or girth complete all as specified and directed.

HIND CONSTRUCTIONS

Tridev Construction Company