Annual Repair for Main Block including Governor Suite and C.M. Suite of Haryana Bhawan, New Delhi for the year 2021-22 (RECALL)

Amount

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. [New HSR 10.58]

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1 :4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. [New HSR 10.61]

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2) Size of Tile 600x600 mm [New HSR 10.63.2]

12 mm cement plaster of mix : 1) 1 :2 (1 cement: 2 fine sand) [New HSR 11.5.1]

12 mm cement plaster of mix : 2) 1 :3 (1 cement: 3 fine sand) [New HSR 11.5.2]

12 mm cement plaster of mix : 2) 1 :6 (1 cement: 6 coarse sand) [New HSR 11.8.2]

Providing & laying average 6mm thick POP Coating on walls, Ceiling, beams and lintels etc. complete in all respects as approved by the Engineer-In-Charge. [New HSR 11.57]

Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get even and smooth finish including cost and carriage of all material, labor charges, scaffolding, sundries etc. complete [New HSR 11.58]

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete. [New HSR 12.3] 1) 2nd Class teak wood (i) (12.3.1.1) 50 x 12mm

Providing and fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. [New HSR 12.12.2] [Labor Rate ] Sheet will be provided by the department free of cost.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: (Royal Shyne Paint or equivalent 1) One or more coats on old work [New HSR 30.27.1] [LR] [Paint will be provided by the department free of cost].

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 1) One or more coats on old work [New HSR 30.28.1]

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 1) Old work (Two or more coats applied @ 1.43 litre/ 10 sqm) over existing cement paint surface [New HSR 30.38.1] [Labor Rate] Paint will be provided by the department free of cost.

Renewing glass panes, with wooden fillets wherever necessary: 1) Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) [New HSR 30.55.2]