WBIW/EE/KCDV/eNIT-05/2026-27 (Sl-08)

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of the excavation not exceeding 1500 mm

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) .With earth obtained from excavation of foundation.1/5 of treanch volume of foundation.

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation u'irh rvater, ramming complete including the cost of supply of sand. (payrnent to be made on 'nn),el asuremcnt ol Iinished quantity)

Hire and labour charges for shuttering rvith centering and necessary staging upto 4 m using approved stout props and thick hard wood planks ofapproved thickness with required bracing or concrete slabs. bcams and columns. lintels curved or straight including fitting, lixing and striking out after completion of works (upto roof of ground floo| 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charg

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. Pakur Variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.Tor steel/Mild Steel I, SAIL/ TATA/RINL

125mm thick brick work with 1st class brick in cement morter (1:4) in ground floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. With 1:6 cement mortar, 20mm thick plaster