PROVN OF SOLID WASTE MANAGEMENT PROJECT (4 TPD) AT BEG AND CENTRE KHADKI UNDER AGE EM I AT GE (C) KHADKI

Supply, installation, commissioning and testing of Wood Shredder alongwith hopper for Dry waste and Leaves with cross cut ouput with following specifications . (i) Shredding Capacity: 150 kg/hr or above with Feed Inlet Size: minimum 4 inches. (ii) Cutter Type: Plate/Disk and Cutter thickness or strip width : minimum 12 mm (iii) Number of Blades: 6 Nos, (iv) Electrical power: Single or multi motor combination with combined power of 30 HP & 3 phase supply. (v) Operating freq & Voltage rating : 50 Hz and 415V. (vi) Output Size: 4–8 mm particle size with dust collection system for dust free operation . (vii) Material of Construction: MS (viii) Accessories :- starter controller, copper cable panel wtih its swtich geaers & stand/foundation, machine gaurds for safety & secure operation are including in this Quoted rate complete all as specified and directed by Engr-in-charge. (xiv) Warranty : One year. Make:- Greenrich/ Saicharan Urja /Ent Care/ Gangotree or Equivalent Make.

Supply, Installation and Commissioning Hammer mill shredder machine alongwith hopper with the following Specification. : - (i) Shredding Capacity: 250 - 300 Kg/Hr or above (ii) Number of Running Blade Rollers: 02 Nos (iii) Number of fixed stationary blades Rollers : 01 Nos (iv) Electrical power: Single or multi motor combination with combined power of 30 HP & 3 phase supply. (v) Operating freq & Voltage rating : 50 Hz and 415V. (vi) Biters : 12 Nos (each bitter has 06 cutting edges RPM (min) 2800. V Belt tranmission 1x2 with pulley sheelves (vii) Mounting Stand : Of sutiable dimensions made of ISMC channels (viii) Accessories : starter controller, copper cable panel wtih its swtich geaers & stand/foundation, machine gaurds for safety & secure operation are including in this Quoted rate complete all as specified and directed by Engr-in-charge. (xiv) Warranty : One year. Make:- Greenrich/ Saicharan Urja /Ent Care/ Gangotree or Equivalent Make.

Supply, installation, commissioning and testing of Customised sorting and feeding Conveyors with screening facility with magnet alongwith hopper all as per following specification: (i) Preferred dimensions : 6000mm L x 750mm W x 800mm H or as directed by Engineer in charge based on site requirement (ii) Belt : As suited to operation of machine & approved by Engineer in Charge (iii) Traverse speed: 4m/minute (adjustable) (iv) Material of Construction : Powder Coated MS, (v) Roller MOC : Zinc Coated MS (vi) Power Specifications: Single Phase 230V, Electrical power 3 phase supply with 3 HP power operated at 50 Hz and 415V. Throughput adjustable with Variable frequency drive control unit with protective devices (vii) Accessories : starter controller, copper cable panel wtih its swtichgeaers & stand/foundation, machine gaurds for safety & secure operation are including in this Quoted rate complete all as specified and directed by Engr-in-charge. (xiii) Warranty : One year. Make:- Greenrich/ Saicharan Urja /Ent Care/ Gangotree or Equivalent Make.

Supply, installation, commissioning and testing of Glass Shredder alongwith hopper all as per following specification :- (i) Preferred dimensions : 1350 mm L x 700mm W x 1700 mm H or as directed by Engineer in charge based on site requirement (ii) Power Specifications: Three Phase operated at 50 Hz and 415V. (iii) Eelctric Motor : 30 HP (iv) Blades : 24 Nos minimum (v) Capacity : 600 Kg / Hr with solid pulley with manual feeding (vi) Power Transmission : Belt based (viii) Accessories : starter controller, copper cable panel wtih its swtichgeaers & stand/foundation, machine gaurds for safety & secure operation, Dust collection device with dust collection baglifter unit for dust free operation complete all as specified and directed by Engr-in-charge. (xiv) Warranty : One year. Make:- Greenrich/ Saicharan Urja /Ent Care/ Gangotree or Equivalent Make.

Supply, Installation and Commissioning of the Pellet machine alongwith hopper with the following Specification :- (i) Pelleting Capacity: 200 - 250 Kg/Hr or above (ii) Pellet Diameter : 8-10 mm variable length (iii) Electrical power: Single or multi motor combination with combined power of 30 HP & 3 phase supply. (iv) Operating freq & Voltage rating : 50 Hz and 415V. (v) Dimensions : 1400 mm X 1400 mm or as directetd by Engineer in Charge as per site requirement & capacity (vi) Mounting Stand :- Of sutiable dimensions made of ISMC channels (vii) Accessories : starter controller, copper cable panel wtih its swtichgeaers & stand/foundation, machine gaurds for safety & secure operation are including in this Quoted rate complete all as specified and directed by Engr-in-charge. (viii) Warranty : One year. Make:- Greenrich/ Saicharan Urja /Ent Care/ Gangotree or Equivalent Make.

Supply, Installation and Commissioning of the Screw Conveyor with wheels with the followingsuggested specification /diamension : (i) Screw profiled conveyors, Type: Enclosed, inclined , (ii) Operating Capacity:Mininum 2 TPH, (iii) Length: 2.5 meters, (iv) Pipe Diameter & Thickness: 220 mm × 4 mm, (v) Inner Pipe: 76.1 mm (Schedule 40), (vi) Screw Diameter & Thickness: 200 mm × 5 mm, (vii) Pitch: 150 mm, (viii) End Bearing: roller bearing (ix) Drive: 3 HP motor, 90 RPM, (x) Feeding & Discharge Chute: Provided (xi) Overload Relief Chute & Drain: Provided at bottom, (xii)Supports & Saddles: Provided, (xiii) Drive Base: Provided, (xiv) Painting: One coat red oxide + one coat enamel finish (xv) Overall dimension : 6000mm Length x 750mm Width x 800mm Height, (xvi) Belt MOC : PVC Green Colour, Traverse speed: 4m/min, Frames made of Powder Coated MS, Roller (xvii) MOC : Zinc Coated MS, (xviii) Power Input: Single Phase 230V, Electircal power 3 phase supply with 3 HP power operated at 50 Hz and 415V. (xix) Throughput adjustable with Variable frequency drive control unit with protective devices are including in this Quoted rate complete all as specified and directed by Engr-in-charge. (xx) Warranty : One year. Make:- Greenrich/ Saicharan Urja /Ent Care/ Gangotree or Equivalent Make.

Supply, installation, commissioning and testing of Weighing scale capacity upto 500kg and bagging machine with tool kite complete all as specified and directed by Engr-in-charge. (i) Warranty : One year. Make:- Greenrich/ Saicharan Urja /Ent Care/ Gangotree or Equivalent Make.

M&L replacement of galvanised iron ( GI ) strip 32 X 6 mm,with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed by Engr-in-charge.

EXTERNAL ELECTRIFICATION WORKS