Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance MARI MARI REASI MARI REASI REASI JAMMU AND KASHMIR 182311 | REASI | JAMMU AND KASHMIR | 182311 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹19.4 L
EMD Value
₹38,800
Closing Date
29 Nov 2022, 4:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
ER GIAN SINGH
OFFICE OF THE EXECUTIVE ENGINEER REW RAMBAN MAITRA
AS PER THE NIT ATTACHED
2022_RDPR_196901_16
NIT 85 OF REW RAMBAN FRESH OF 73,74,75,76 AND17,38
Open Limited
Civil Works
Item Wise
90 days
RAMBAN
AS PER THE NIT ATTACHED
2 documents required · 2 mandatory
₹600
EXECUTIVE ENGINEER REW RAMBAN MAITRA
₹38,800
30 Nov 2022
21 Nov 2022
30 Nov 2022
21 Nov 2022
29 Nov 2022
21 Nov 2022
Amount
Earth work in trench excavation by manual means in trenches for foundations, drains,(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50 meters and lift upto 1.5 m in all kinds of soils
Providing and laying in position cement concrete (1:5:10)mix in foundation &plinth using 40mm Nallah stone aggregate excluding shuterring including all carriages with leads and lifts complete job
Random Rubble masonry with hard stone in foundation and plinthincluding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth leveland curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah including all carriages complete job.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm N. size)including all carriages complete job.
Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers.
Random Rubble masonry with hard stone in foundation and plinthincluding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth leveland curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry including all carriages complete job.
Extra over stone masonary for superstructure above
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm N. size) including all carriages with leads and lifts complete job
Centering and shuttering including strutting, propping etc. and removal of form work for:form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars
Providing and fixing pressed steel door frames conforming to IS:4351 manufactured from commercial mild nsteel of 1.25mm thickness including hinges jamb,lock,jamb,bead and if required angle threshold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means including MS pressed butt hinges 2.5mm thick with mortar guards lock strike plate cimplete job.
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled with whitelead, including a coat of approved steel primer and two coats of approvedpaint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gram/m2
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gram/m2
20mm thick cement sand plaster in 1:6 mix
Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of requiredsize with necessary screws, excluding panelling which will be paid forseparately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).second class kail wood 30mm thick
Providing and fixing panelling or panelling and glazing in panelled orpanelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion insidegrooves or rebates to be measured). Panelling for panelled or panelledand glazed shutters 25 mm to 40 mm thick.second class kail wood
Providing and fixing glazed shutters for doors, windows and clerestorywindows using 4mm thick float glass panes including ISI marked M.S.pressed butt hinges bright finished of required size with necessaryscrews.second class kail wood 30mm thick
Providing and fixing wire gauze shutters using galvanized M.S. wiregauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISImarked M.S. pressed butt hinges bright finished of required size withnecessary screws as per direction of Engineer-in-charge :
Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc including priming coat withapproved steel primer all complete. Fixed to steel windows by welding
Applying priming coat: aWith ready mixed pink or grey primer of approved brand and manufacture on wood work(Hard and soft wood)
Painting with ready mixed paint of approved brand and manufacture in all shades two or more coats on new surface.
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete.2mm thick
Distempering with oil bound distemper New work (two or more coats)over and including priming coat with cement prime
Providing wood work in frames of false ceiling, partitions etc. sawn andfixed in position :Budloo / Fir wood including all carriages complete job.
Providing and fixing 4mm thick ply board with one side teak face in ceiling with necessary nails complete job.
Providing and fixing of plained eaves boarding (2nd class kail wood)300 mm x 40 mm (nominal size)
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brickballast 40mm nominal size well rammed and consolidated and grouted with finesand including finishing the top smooth and curing complete
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to bespecified by the manufacturers) of 1st quality conforming to IS: 15622 ofapproved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, inall colours, shades except burgundy, bottle green, black of any size asapproved by Engineer- in-Charge, in skirting, risers of steps and dados over12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing inwhite cement mixed with pigment of matching shade complete.
Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including groutingthe joints with white cement and matching pigments etc. completeSize of tile 600x600 mm
Provision for electrification/sanitory (Paid as per actual)
Provision for sign board and photographs (Paid as per actual)
MOHAMMAD FAREED KHAN
FAROOQ AHMED TRAGWAL
M/S MOHD SALEEM MULAH
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .