SPECIAL REPAIRS TO FURNITURE IN CONVERSION OF CHARPOY GI PIPE NYLON NEWAR INTO HARD TOP BY FIXING PLYWOOD AT DEPOT BN N TB III OF MEG CENTRE UNDER GE NORTH BANGALORE

Amount

FD-220 12mm thick commercial plywood (7 ply) duly ISI marked of size 2000mm x 900mm fixed over the GI charpoy all the four corners of the plywood should be shaped such that it should rest on all long and short rails of the charpoy, the plywood shall be fixed to the charpoy with 10 Nos of 6mmx75mm long bolt and nuts duly counter shunk on top with suitable washers (nut, bolts & washers will be galvanised iron) by making holes 3 each on each long rails and 2 each on each short rails all as directed. The quoted rate shall also include for the following arrangement of fixing:- (i) Taking down of existing old unserviceble nylon newar from charpoy GI pipe. (ii) Provision of 3 No of the flat iron 40 x 5mm thick duly welded to long rails at 150mm from each short rails and 01 flat iron at centre of the long rail such that the flat iron, long rails should be at same level. (iii) two coats of synthetic enamel black paint over a coat of red oxide primer on flat iron and welded portions all as specified and as directed. Make of plywood : Greenply / Archid / Century / National Synthetic enamel paint :- Apcolite of Asian / Superlac of Shalimar / Luxol of Berger / Pentilite of Nerolac / Brolac of Jenson & Nicholson

FD-220 Supply only GI pipe 32mm dia medium grade for long rail 1880 mm length each and threading both ends as per drawing and as directed by Engineer-in-Charge.

FD-220 Cutting the dismantled GI pipe 32mm dia long rail and modifying into one short rail and one leg. The short rail threading both ends as per drawing and legs including threading as per drawings, providing new MS sheet 3mm thick 50mm dia made to shape and continuously welded to the bottom and MS Sheet piece applied with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as directed and as directed by Engineer-in-Charge.

FD-220 Cutting the dismantled GI pipe 32mm dia short rails and modifying into legs including threading as per drawings, providing new MS sheet 3mm thick 50mm dia made to shape and continuously welded to the bottom and MS Sheet piece applied with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as directed. Note : Each leg shall be measured separately.

FD-220 Supply only GI elbow 32mm dia medium grade 3 way suitable for GI pipe charpoy conforming to relevant IS with ISI mark all as spcified and as directed by Engineer-in-Charge.

FD-220 Supply only check nut 6mm dia suitable for 32mm dia GI pipe charpoy of weight not less than 100 gms each all as specified and as directed by Engineer-in-Charge.

FD-220 Assembling the GI charpoy with serviceable members as retrieved vide Sl Item No.1.03 &1.04 here-in-before and new modified / supply only members as obtained vide Sl item No 1.02 to 1.06 here-in-before all as per drawing and as directed by Engineer-in-Charge.

KASTURILAL HARICHAND OHRI AND SONS

PRIYADARSHINI CONSTRUCTIONS

Ms GHOSH AND SONS

Global Furnisherts

swastik industries