PROVN OF INDUSTRIAL SIZE DEHUMIDIFIER AT BLDG NO 349, PROVN OF 10 X SOLAR STREET LIGHT IN INF BN II LOC AND PROVN OF SECURITY, BOLLARD LIGHT, GATE LIGHT AND ALLIED WORKS FOR WATER SUPPLY INSTALLATION AT UMROI MIL STN UNDER GE UMROI

Supply , Install Commissioning Desiccant type table top 300 CMH Dehumidifier working on 230 V, Single Phase ,50 HZ frequency having heater capacity of 3.6 KW, Process motor 0.10 Kw, react Motor 0.10Kw microprocesssor based, LED Display CNC Fabricated unit with Pre coated MS Sheet all as specified and as directed. Make : Bry Air Model NO: FFB300 or equivalent in Munters India Humidity Control Private Limited/Condair. Technical Specifications: 1. Type of Dehumidifier: Desiccant Type table top. 2. Supply of Dehumidifier Air: 300 CMH 3. Total Heater Capacity : 3.6 KW, Process Motor : 0.1 Kw, Reactive Motor: 0.1 Kw 4. Power : 230/V/1PH/50Hz 5. Dehumidifier Equipped with microprocessor based controlling system having LED Display. 6. Humidistat with Digital Display 7. CNC fabricated Unit with Pre coated MS Sheet. 8. Process and reactivation air flow Sectors insulated with Aluminium Foils 9. Dehumidifier is CE Certified. 10. Dimension 740mmx540mmx445mm . 10. ISO 9001:2015 and ISO 14001: 2015 Certification. 11. Electrical Inter locking of fan motor,heaters and rotor drive as safety Measures

M&L for point wiring with 2.5 sqmm FRLSH PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable drawn in PVC casing and caping on surface wall, ceiling with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet, cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm copper conductor cable (FRLSH) (multistanded) PVC insulated and unsheathed cable as earth wire to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3mm thick complete all as specified and directed. Note:-Rate for cutting, chiselling and making good the existing surfaces for complete wiring is deemed to be included in quoted rate.

Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) with white colour complete all as specified and directed.

Supply and fix MCB SPN 32 Amps, 'C' series, 10 Ka, 240 volts complete all as specified and directed.

Supply and fix MCB SPN DB 8 way double door,IP 43 protection, glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed.

Supply and fix MCB SP 6 to 20 Amps, 'C' series, 10 Ka, 240 volts complete all as specified and directed.

Material & labour for Sub main wiring with two runs of single core, FRLSH 6 sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi-standed copper conductor cable LT 1100 volts grade drawn through PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 sqmm as earth wire (green in colour) run through casing capping and connected to common DBs/ earth dolly complete all as specified and directed. Note : Two run of 6 Sqmm cable, one run of casing capping and one run of 4 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

M&L for providing and fixing false ceiling of designer tile ivory/white painted (high pressure steam cured ) of 4 mm thick(as per IS:14832) of size 595x595 mm and any one of the design (Cascade or electra) in true horizontol level, suspended on interlocking metal grid of hot dipped galvanized steel section (galvanized@120gms both side inclusive and black painted groove on all T Webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced between main T at 600mm c/c to form grid of 1200x600mm and secondary cross T of length 600mm and size of 15x32 mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.4mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffuser, grills,light fittings, fixtures, smoke detectors, etc. Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturer recommendation. GI adjustable wire of 4mm dia with galvanized butterfly level of clips spaced at 1200 mm c/c along main T bottom exposed width of 15mm of all T Section of 4mm dia GI wire shall be pre painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width at any heights complete all as specified and directed.

Supply and fixing all in one comprising of high efficiency LEDs (120 lm/W), solar street Light with luminaire wattage 30W, High Efficiency Mono Crystalline Solar PV Module 12V 50W, lithium Ferro phosphate battery 12.8V 24Ah with inbuilt BMS technology, high efficiency LED >93%, MPPT solar charge controller and aluminium extruded body, specially designed intelligent microwave sensor to control the dimming NAD brightness of light leads to extend working time and 5 m long octagonal pole (type CPT-5030) top dia 70 mm bottom dia 130 mm sheet thickness 3 mm including base plate of size (L x B x T) 200 x 200 x 12 mm, bolt size 4 x 16 mm dia and bolt length 450 mm complete all as specified and directed. Make: Crompton/Havells/Philips/Bajaj/Wipro Note: Necessary excavation, earthwork and PCC(1:3:6 type C2) work for foundation are deemed to be inclusive in the quoted rate.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation of pole and laying of UG cable and getting out in soft/loose soil complete all as specified and directed.