NIT NO. 31 ITEM NO. 03

Amount

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Double pole

P/f of Hot press sheed moulded compound (SMC) Fire retardant (Temp. Resistance up to 200 C ) IP-55 weather proof pole box of inner dimension 200mm X 160mm X98 mm(NS) complete with suitable arrangment for fixing of 2 nos of 6 to 32 amp single pole MCB & 63 Amp double pole isolator (MCB/Isolator excluded) with neutral link duly shorting on DIN channel with 2 nos. of MS clamps with SS back plate of suitalbe size with Danger monogram property printed on the cover etc as reqd.

CABLING

Supply of XLPE insuated PVC sheathed Al. conductor Armoured cable 1.1 kv grade conforming to IS-7098 0f following size :- (b) 2x10 sq mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

P&F following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to IS.694/1990 etc. as reqd. b) 3 x 2.5 sq mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and laying of following size of C PVC pipe in along with all accessories like socket, bend, couplers etc. confirming to IS :4985:2000, part-II complete with fitting and cutting, jointing etc. direct in groung (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 25 MM dia

Bollard Light

Fabrication, supplying, installation, and commissioning of LED Bollard Light of MS sheet i/c laser cutting, making designe as approved by Engineer Incharge and welding the same and making suitable arrangement for mounting of 6-8 Watt LED down lighter i/c PU painted, foundation nut bolt but excluding foundation complete etc. as reqquired.

Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

STEP LIGHT

Suppy, Installation, Testing & Commissioning of 6-7 Watt LED PATHWAYS LIGHT/STEP LIGHT rectangular shaped in duly powder coated aluminium die cast housing with corrosion resistance coating having IP-65/66 protection as required. A. LUMEN EFFICACY >90 lm/watt. B. PF > .95 C. RATED VOLTAGE = 220 -240 VAC,50Hz

SPIKE LIGHT

Supply, installation,testing & commissioning of 9W/12W LED bush/ spike light (with mounting pipe) with die cast aluminium housing with toughened glass suitable for ground mounting, enclosed with glass cover in frame, mounting bracket provided for aiming the object, High Ingress protection against dust & moisture, corrosion resistant coated and IP-65/66 protection as req A. LUMEN EFFICACY >90 lm/watt. B. PF > .95 C. RATED VOLTAGE = 220 -240 VAC,50Hz

DOWNLIGHT

Supply, installation, testing & commissioning of 12W LED high efficient Recess mounted downlighter with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish design as required. A. LUMEN EFFICACY >90 lm/watt. B. PF > .95 C. RATED VOLTAGE = 220 -240 VAC,50Hz

MISc Light

Supply, installation, testing & commissioning of 30W LED post top lantern made in die cast aluminium base, spun aluminium top, acrylic diffuser, stainless stell screw, corrosion and UV ray resistant coating, IP-65 as required.

Supply of 30W LED bulb for installing on post top lantern.

SITC of 60 W LED Flood light luminary fitted with lens made of presure die cast aluminium housing & toughened glass cover complete with the following specification as reqd (b) Total system wattage 60 watt +/-5% (d) Luminous efficacy>=100 Lm/w (e) Power Factor>=0.95 (f) Protection Class-IP-66

SHRIRAM SHARMA

ELECTROMECH ENTERPRISES

M/s HI TECH ELECTRICALS