COMPREHENSIVE MAINTENANCE OF FURNITURE ITEMS REPAIR AND MAINT OF CERTAIN STEEL AND WOODEN FURNITURE FOR OTM ACCN AND MD ACCN UNDER GE I GOS

Amount

Scheduled Items

Removing old unserviceable cane of chair verandah steel and S&F plastic cane of 4 mm wide, white in colour, semi circular type in matt pattern including cleaning dust, dirt etc, derusting and applying one coat of synthetic enamel paint of approved shade and providing four number of rubber shoes to legs complete all as specified and as directed. Drg No: FD-256

Removing unserviceable old plastic cane of Dining Chair of any type and S&F plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per Godrej pattern and polishing to frame work complete all as specified and as directed. Drg No: FD-279

Removing unserviceable old plastic cane of Chair Writing of any type and S&F plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per Godrej pattern and polishing to frame work complete all as specified and as directed . Drg No: FD -280

Removing unserviceable old plastic cane of Chair Easy of any type and S&F plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per Godrej pattern and polishing to frame work complete all as specified and as directed. Drg No:FD-229

Supply and setting of 100 mm thick (32 density) foam cusion for Sofa set with cover of tapestry cloth of approved quality not less than Rs 450/RM including white colour astra covering below cover, including removing old covers as shown on drawing complete all as specified and directed. Drg No: FD-281

Removing unserviceable cover from existing cushion of sofa set and S&F cover made of tapestry cloth of approved quality not less than Rs 450/RM for cushion of size 530mm x 570mm x 100mm thick including stiching as per existing pattern of cushion all as specified and as directed. Drg No:FD-281

M&L for french polishing to sofa set 4 seater after removing the dirt including smoothing all the surface of exposed wooden surface by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-281.

Removing old damaged legs of sofa set four seater and S&F new legs of 1st class seasoned teak wood of size 530mm X 70mm X 35mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged side rails of sofa set four seater and S&F new side rail of 1st class seasoned teak wood of size 600mm X 100mm X 35mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged front / back / top / bottom rails of sofa set four seater and S&F new front / back / top / bottom rails of 1st class seasoned teak wood of size 530 mm X 100 mm X 35mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged bearer of sofa set four seater and S&F new bearer of 1st class seasoned teak wood bearers of size 530mm X 40mm X 40mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged support to back frame of sofa set four seater and S&F new support to back frame of 1st class seasoned teak wood of size 530mm X 70mmX 50mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged arm of sofa set four seater and S&F new arm of 1st class seasoned teak wood of size 725mm X 70mm X 35mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged side rail of back frame of sofa set four seater and S&F new side rail of 1st class seasoned teak wood of size 560mm X 70mm X 40mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged batten of sofa set four seater and S&F new batten of 1st class seasoned teak wood of size 560 / 530mm X 50mm X 20mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing of old damaged front leg of chair easy and S&F new front leg of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-229

Removing of old damaged rear leg of chair easy and S&F new rear leg of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-229

Removing of old damaged seat side rail of chair easy and S&F new seat side rail of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-229

Removing of old damaged front/back side rail of chair easy and S&F new front/back side rail of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-229

Removing of old damaged back rest side rail of chair easy and S&F new back rest side rail of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-229

Removing of old damaged back rest lower/upper rail of chair easy and S&F new back rest lower/upper rail of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-229

Removing of old damaged stiffener of chair easy and S&F new stiffener of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-229

Removing of old damaged arm of chair easy and S&F new arm of 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-229

Removing of old damaged front leg of chair writing and S&F new front leg of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed. Drg No:FD-280

Removing of old damaged rear leg of chair writing and S&F new rear leg of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed. Drg No:FD-280

Removing of old damaged back rest rail of chair writing and S&F new back rest rail of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed. Drg No:FD-280

Removing of old damaged seat side rail of chair writing and S&F new seat side rail of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed. Drg No:FD-280

Removing of old damaged seat front/back rail of chair writing and S&F new seat front/back rail of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed. Drg No:FD-280

Removing of old damaged stiffener of chair writing and S&F new stiffener of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed. Drg No:FD-280

Removing of old damaged hand rest of chair writing and S&F new hand rest of 1st class seasoned teak wood of existing size and type including polishing all as per drg complete all as specified and as directed. Drg No:FD-280

Removing old damaged legs of sofa set 05 seater and S&F new legs of 1st class seasoned teak wood of size 530mm X 70mm X 35 mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged side rail of sofa set 05 seater and S&F new side rail of 1st class seasoned teak wood of size 600mm X 100mm X 35mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged front/back/top/bottom rail of sofa set 05 seater and S&F new front/back/top/bottom rail of 1st class seasoned teak wood of size 530mm X 100mm X 35mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged bearer of sofa set 05 seater and S&F new bearer of 1st class seasoned teak wood of size 530mm X 40mm X 40mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged support to back frame of sofa set 05 seater and S&F new support to back frame of 1st class seasoned teak wood of size 530mm X 70mm X 50mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged arm of sofa set 05 seater and S&F new arm of 1st class seasoned teak wood of size 725mm X 70mm X 35 mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged side rail of back frame of sofa set 05 seater and S&F new side rail of back frame of 1st class seasoned teak wood of size 560mm X 70mm X 40mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged battens of sofa set 05 seater and S&F new battens of 1st class seasoned teak wood of size 560 / 530mm X 50mm X 20 mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged front/back/top/bottom rails of sofa set 05 seater and S&F new front/back/top/bottom rail of 1st class seasoned teak wood of size 1730mm X 100mm X 35mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged bearer of sofa set 05 seater and S&F new bearer of 1st class seasoned teak wood of size 1730mm X 40mm X 40mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing old damaged support to back frame of sofa set 05 seater and S&F new support to back frame of 1st class seasoned teak wood of size 1730mm X 70mm X 50 mm including polishing complete all as specified and as directed. Drg No:FD-281

Removing of old damaged front leg of chair dining and S&F new front leg with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-279

Removing of old damaged rear leg of chair dining and S&F new rear leg with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-279

Removing of old damaged side rail of chair dining and S&F new side rail with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-279

Removing of old damaged front rail of chair dining and S&F new front rail with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No:FD-279

M&L for removing bends, setting, broken / detached weld of any type steel chairs and rejointing by welding not exceeding 10 cm in width or girth (thickness of metal to be welded not exceeding 6 mm) and applying two coats of olive green synthetic enamel paint over a coat of red oxide primer on the effected portion to match with the existing surface complete all as specified and as directed.

M&L for removing bends, setting, broken / detached weld of any type steel chairs and rejointing by welding exceeding 10 cm but not exceeding 20 cm in width or girth (thickness of metal to be welded not exceeding 6 mm) and applying two coats of olive green synthetic enamel paint over a coat of red oxide primer on the effected portion to match with the existing surface complete all as specified and as directed.

S&F PVC shoes round type for chair varandah complete all as specified and as directed. Drg No:FD-256

Removing old unserviceable castor wheels from leg of Revolving Chair of any type and S&F new caster wheel of approved quality complete all as specified and as directed.

Removing old unserviceable base (Leg) of Revolving Chair of any type and S&F new base (Leg) with wheels of approved quality complete all as specified and as directed.

Removing old unserviceable seat and back of Revolving high back chair /net chair other than executive chair of any type and S&F seat and back of Revolving high back chair /net chair of approved quality complete all as specified and as directed. Drg No:- TP ,Godrej Model no- PCH-7022,7031,7021,7001,7032 (R)7046 or equivalent,Featherlite Model No-BE-2412 or equivalent

S&F hydraulic system of Revolving chair other than executive any type of approved quality complete all as specified and as directed.

Removing old unserviceable Hand rest of any Revolving chair other than executive chair of any type and S&F new hand rest complete all as specified and as directed.

Removing old unserviceable seat and back rest of Computer chair (MAP) of any type and S&F new seat and back rest of approved quality complete all as specified and as directed.Drg No: FD/E6/MAP/01

S&F hydraulic system of Computer chair (MAP) of executive any type of approved quality complete all as specified and as directed.Drg No: FD/E6/MAP/01

Removing old unserviceable Hand rest of Computer chair (MAP) of any type and S&F new hand rest best quality complete all as specified and as directed.Drg No: FD/E6/MAP/01

Removing old damaged unserviceable seat and back of chair writing (MAP) and S & F new seat and back with necessary fixing arrangement complete all as specified and as directed.Drg No: FD/E6/MAP/12

Removing old damaged unserviceable hand rest of chair writing steel (MAP) of any type and S&F hand rest of apporved quality complete all as specified and as directed.Drg No: FD/E6/MAP/12

Removing old damaged unserviceable MS Tubular frame writing (MAP) and S & F new MS tubular frame made out of 25 MMX10MM Sec with necessary fixing arrangement complete all as specified and as directed.Drg No: FD/E6/MAP/12

Supply and Setting seat cushion and cover for Chair Dining cushin by removing the existing worn out seat cushion and providing new seat cushion and Cool foam size 450mmx450mm x75 mm thick ,density 40 Kg/Cum with 12 mm thick ply wood BWR grade phenol bonded covered with tapestry cloth for chair dining cushioned complete all as specified as shown drawing Note:- Tapestry cloth shall be Approved by GE. Make of cushion:- Sleep Well/Kurlon/Nidra Drg No: FD/E6/MAP-II/04

Removing of old damaged front leg of chair dining and S&F new front leg with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No: FD/E6/MAP-II/04

Removing of old damaged rear leg of chair dining and S&F new rear leg with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No: FD/E6/MAP-II/04

Removing of old damaged side rail of chair dining and S&F new side rail with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No: FD/E6/MAP-II/04

Removing of old damaged front rail /back rail of chair dining and S&F new front rail with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No: FD/E6/MAP-II/04

Removing of old damaged VER strips of chair dining and S&F new VER strips with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No: FD/E6/MAP-II/04

Removing of old damaged stiffener of chair dining and S&F new stiffener with 1st class seasoned teak wood of existing size and type including polishing complete all as specified and as directed. Drg No: FD/E6/MAP-II/04

Removing old unserviceable head board and foot board ful set (including frame work of 38MMX38MM MS square pipe (18 Gauge) , 18 MM X18 MM MS Square pipe (18 Gauge ) ,18 MM both side prelaminated board screw to ms strip at welded to 18 MM th rectangular pipe , 25 MM x 65 mm MS rect MS pipe (18 Gauge ) , 25 MM X 25 MM MS square MS Pipe (18 Gauge )) from bed hard steel with plywood top and S&F new head board and foot board (including frame work of 38MMX38MM MS square pipe (18 Gauge) , 18 MM X18 MM MS Square pipe (18 Gauge ) ,18 MM both side prelaminated board screw to MS strip at welded to 18 MM th rectangular pipe , 25 MM x 65 mm MS rect MS pipe (18 Gauge ) , 25 MM X 25 MM MS square MS Pipe (18 Gauge) ) welding with both side long rail of Bed hard steel with plywood top complete all as specified and directed. Drg No:- FD/E6/MAP/08(R)

S&F 25 mmX65 mm mild steel pipe ,medium grade,ISI marked, 18 gauge with necessary bending , welding as required and applying two coats of synthetic enamel black paint over a coat of red oxide primer on replaced steel surfaces including removing of existing broken/damaged pipe of Bed hard steel with ply top complete all as specified and directed. Drg No:- FD/E6/MAP/08(R)

S&F 25mmX 25mm mild steel pipe ,medium grade,ISI marked, 18 gauge with necessary bending , welding as required and applying two coats of synthetic enamel black paint of approved shade over a coat of red oxide primer on replaced steel surfaces including removing of existing broken/damaged pipe of Bed hard steel with ply top complete all as specified and directed. Drg No:- FD/E6/MAP/08(R)

M&L for applying one coat of synthetic enamel paint to Bed Hard Steel with Ply top including preperation of old exposed painted steel surfaces after removing the dirt and dust etc except wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and directed. Drg No:- FD/E6/MAP/08(R)

S&F 12 mm thick plywood BWR grade,type BB, ISI marked with necessary bolts and nuts of existing size and shape including removing old damaged unserviceable plywood of Bed Hard Steel With Ply top complete all as specified and directed. Drg No:- FD /E6/MAP/08(R)

S&F new mirror 5 to 5.5 mm thick mirror of size specified in drawing to table dressing gents including taking out existing broken / faded mirror complete all as specfied and directed. Drg No:- FD/E6/Map/16

S&F new top of 18 mm thick prelaminated particle board one side decorative face and other side balancing white grade-I, ISI marked (exterior grade) of size 600mm x 100 mm including 4mm thick teak wood beading to all around and polishing to exposed surface including removing old damaged top of table dressing gents with mirror complete all as specifed and directed. Drg No:FD/E6/Map/16

Removing old unserviceable side and S&F new side of size 1200mm x 100 mm of table dressing gents with mirror complete all as specifed and directed. Drg No:FD/E6/Map/16

Removing of old unserviceable base ply to be replaced by 12mm thick BWP plywood of size 1200mm x 600 mm of table dressing gents with mirror complete all as specifed and directed. Drg No:FD/E6/Map/16

S&F in replacement of teak wood frame of size 50mm x 28 mm all around of table dressing gents with mirror complete all as specifed and directed. Drg No:FD/E6/Map/16

S&F in replacement of 5 to 5.5 mm thick glass shelves of size 100mm x 600 mm including repair of shelves to table dressing gents with mirror complete all as specifed and directed. Drg No:FD/E6/Map/16

S&F in replacement of teak wood legs of size 450mm x 38 mmx 38 mm as per drawing to table dressing gents with mirrorcomplete all as specifed and directed. Drg No:FD/E6/Map/16

S&F 5 to 5.5 mm thick mirror of size specified in drawing to hat stand with mirrror including taking out existing broken / faded mirror complete all as specfied and directed. Drg No :- FD-23 & 233

S&F new back side ply 6 mm BWP grade as per drg including removing old damaged back side ply of hat stand with mirror complete all as specified and as directed. Drg No :- FD-23 & 233

S&F new front ply 4 mm thick BWP grade one side teak face as per drg and removing of old damaged front ply of hat stand with mirror complete all as specified and as directed. Drg No :- FD-23 & 233.

S&F new brass Peg as per drg and removing of old damaged peg of hat stand with mirror complete all as specified and as directed. Drg No :- FD-23 & 233.

S&F top of 18 mm thick prelaminated particle board one side decorative face and other side balancing white grade-I, ISI marked (exterior grade) including 4mm thick teak wood edging alround including polishing to exposed surfaces including removing old damaged unservicable top of table peg complete all as specified and directed. Drg No:- FD-27, 227, 277 & 384

S&F new leg of seasoned teak wood of size specified in drawing and removing of old damaged leg of table peg complete all as specified and as directed. Drg No FD-27, 227, 277 & 384

S&F new long rail of seasoned teak wood of size specified in drawing and removing of old damaged long rail of table peg complete all as specified and as directed. Drg No :-FD-27, 227, 277 & 384

S&F new short rail of seasoned teakwood of specified size and removing of old damaged short rail of table peg complete all as specified and as directed. Drg No:- FD-27, 227, 277 & 384

S&F new top of 18 mm thick prelaminated particle board one side decorative face and other side balancing white grade-I, ISI marked (exterior grade) including 4mm thick teak wood beading all around the top and polishing including removing old damaged top of table centre of size 450mm x 900 mm complete all as specified and as directed. Drg No:- FD-274, 235 & 134

S&F new legs of size 60mm x 30 mmx 400 mm of 1st class seasoned teak wood including polishing and removing old damaged legs of table centre complete all as specified and as directed. Drg No:- FD-274, 235 & 134

S&F in replacement long rail of size 60mm x 30 mmx 850 mm including polishing and removing old damaged long rail of table centre complete all as specified and as directed. Drg No:- FD-274, 235 & 134

S&F in replacement short rail of 20mm x 50 mm x 400 mm including polishing and removing old damaged short rail of table centre complete all as specified and as directed. Drg No:- FD-274, 235 & 134

S&F in replacement centre stiffener of size 20 mm x 50 mmx 400 mm including polishing and removing old damaged side and centre stiffener of table centre complete all as specified and as directed. Drg No:- FD-274, 235 & 134

S&F new top of 18mm pre laminated particle board one side decorative face and other side balancing white face grade- I, ISI marked and polishing and removing of old damaged top of table bed side complete all as specified and directed . Drg No:- FD-28 & 276

S&F 12 mm thick prelaminated particle board, grade-I , ISI marked as in left and right side and removing of old damaged left and right side board of table bed side complete all as specified and directed . Drg No:- FD-28 & 276

S&F 6 mm thick ply BWP grade to back side of table bed side and removing of old damaged ply to back side of table bed side complete all as specified and directed . Drg No:- FD-28 & 276

S&F new shelf of 12 mm thick prelaminated particle board oneside decorative face and other side balancing white grade-I, ISI marked, exterior grade and removing of damaged shelf of table bed side complete all as specified and directed . Drg No:- FD-28 & 276

S& F new bottom of 12mm thick prelaminated particle board one side decorative face and other side balancing white, grade-I, ISI marked and removing of old damaged bottom of table bed side complete all as specified and directed . Drg No:- FD-28 & 276

S&F new top of 18 mm thick prelaminated particle board one side decorative face and other side balancing white, grade-I, ISI marked (exterior grade) including 4mm thick teak beading all around and polishing including removing of old damaged unservicable top for table dining 6 persons complete all as specified and as directed. Drg No:- FD-30, 278 & 273

S&F new leg of 1st class seasoned teak wood of size as specifed in drawing including polishing and removing of old damaged leg of table dinning 6 persons complete all as specified and as directed. Drg No:- FD-30, 278 & 273

S&F new long rail of 1st class seasoned teak wood of size as specifed in drawing including polishing and removing of old damaged long rail of table dinning 6 persons complete all as specified and as directed. Drg No:- FD-30, 278 & 273

S&F new short rail of 1st class seasoned teak wood of size as specifed in drawing including polishing and removing of old damaged short rail of table dinning 6 persons complete all as specified and as directed. Drg No:- FD-30, 278 & 273

S&F new top of 18 mm thick prelaminated particle board one side decorative face and other side balancing white , grade-I, ISI marked , exterior grade with 4 mm thick teak wood edging all around including polishing and removing of old damaged unservicable top for teapoy complete all as specified and as directed. Drg No:- FD-232, 278 & 382

S&F new leg of 1st class seasoned teak wood of size specified in drawing including polishing and removing old damaged leg of teapoy complete all as specified and as directed. Drg No:- FD-232, 278 & 382

S&F new long rail of 1st class seasoned teak wood of size specified in drawing including polishing and removing old damaged long rail of teapoy complete all as specified and as directed. Drg No:- FD-232, 278 & 382

S&F new short rail of 1st class seasoned teak wood of size specified in drawing including polishing and removing old damaged short rail of teapoy complete all as specified and as directed. Drg No:- FD-232, 278 & 382

S&F side and center stiffener of 1st class teak wood size specified in drawing including polishing and removing old damaged side and centre stiffener of teapoy complete all as specified and as directed. Drg No:- FD-232, 278 & 382

S&F top board 18 mm thick prelaminated particle board one side decorative face and other side balancing white , grade-I,ISI marked , exterior grade OSD with teak wood beading all around including polishing and removing of old damaged top of side board complete all as specifed and as directed. Drg No:- FD-26,241&372

S&F left and right side of side board and removing of old damaged left and right side of side board complete all as specifed and as directed. Drg No:- FD-26,241&372

S&F back side ply of 12 mm thick BWP grade and removing of old damaged back side ply of side board complete all as specifed and as directed. Drg No:- FD-26,241&372

S&F shutter as per existing shape including magnaet catchers, handles and hinges and removing of old damaged shutter of side board complete all as specifed and as directed. Drg No:- FD-26,241&372

S&F new drawer as per drawing with knobs and removing of old damaged drawers of side board complete all as specifed and as directed. Drg No:- FD-26,241&372

S&F shelves 12 mm thick BWP grade ply wood as per drawing and removing of old damaged shelves of side board complete all as specifed and as directed. Drg No:- FD-26, 241 & 372

S&F new top of 18mm thick pre laminated particle board of size 1200mm x 450 mm one side decorative face and other side balancing white , grade-I , ISI marked (exterior grade) with 4 mm thick teak wood beading all around including polishing and removing of old damaged top of binsolid linen multipurpose complete all as specified and as directed. Drg No:- FD/E6/MAP/09)

S&F drawers as per drawing and removing of old damaged drawer of binsolid linen multipurpose complete all as specified and as directed. Drg No:- FD/E6/MAP/09)

S&F shutters with magnetic cathchers as per drawings including decoractive handles and removing of old damaged shutter of binsolid linen multipurpose complete all as specified and as directed. Drg No:- FD/E6/MAP/09)

S&F base including 25mm x 25 mm stiffners and removing of old damaged base of binsolid linen multipurpose complete all as specified and as directed. Drg No:- FD/E6/MAP/09)

S&F new top of size 700 mmx 400mm x 18 mm thick prelaminated particle board one side decorative face and other side balancing white grade-I, ISI marked , exterior grade with 4 mm thick teak wood edging all around including polishing and removing of old damaged/UNSV top for teapoy varandah complete and all as specified and directed. Drg No:- FD/E6/MAP/17

S&F new wire mesh of existing dia and aperture and applying two coats of synthetic enamel paint over one coat of red oxide primer including necessary welding and removing of old damaged wire mesh of teapoy varandha &all as specified and as directed. complete and all as specified and directed. Drg No:- FD/E6/MAP/17

S&F new long rail of existing size and applying two coats of synthetic enamel paint over one coat of red oxide primer including necessary welding and removing of old damaged long rail of teapoy varandha &all as specified and as directed. complete and all as specified and directed. Drg No:- FD/E6/MAP/17

S&F new short rail of existing size and applying two coats of synthetic enamel paint over one coat of red oxide primer including necessary welding and removing of old damaged short rail of teapoy varandha &all as specified and as directed. complete and all as specified and directed. Drg No:- FD/E6/MAP/17

S&F new leg of existing size and applying two coats of synthetic enamel paint over one coat of red oxide primer including necessary welding and removing of old damaged leg of teapoy varandha &all as specified and as directed. complete and all as specified and directed. Drg No:- FD/E6/MAP/17

S&F new top of size 450mm x 450 mm x 18 mm thick prelaminated particle board one side decorative face and other side balancing white grade-I, ISI marked , exterior grade with 4 mm thick teak wood edging all around including polishing and removing of old damaged unservicable top of table bed side complete all as specified and as directed. Drg No :-FD/E6/MAP/15R

S&F side of size 400mmx380mm x18 mm and removing of old damaged unservicable side of table bed side complete all as specified and as directed. Drg No :-FD/E6/MAP/15R

S&F bottom drawer sides of size 300mm x 400 mm and removing of old damaged unservicable bottom drawer of table bed side complete all as specified and as directed. Drg No :-FD/E6/MAP/15R

S&F top drawer sides of size 400 mmx 100 mm and removing of old damaged unservicable top drawer side of table bed side complete all as specified and as directed. Drg No :-FD/E6/MAP/15R

S&F top drawer back ply 6 mm thick of size 100 mmx 400 mm and removing of old damaged unservicable back ply of table bed side complete all as specified and as directed. Drg No :-FD/E6/MAP/15R

S&F bottom drawers back ply wood 6 mm thick of size 400mm x 400 mm(6mm) and removing of old damaged unservicable bottom drawer of table bed side complete all as specified and as directed. Drg No :-FD/E6/MAP/15R

S&F top/Bottom drawer bottom ply of size 400mm x 400mm x12mm and removing of old damaged unservicable bottom ply of table bed side complete all as specified and as directed. Drg No :-FD/E6/MAP/15R

Supply only decorative handle 75 mm to drawer of table bed side complete all as specified and as directed. Drg No :-FD/E6/MAP/15R

S& F new legs made out of 25 mm round pipe 1.6 mm thick with all exposed steel surfaces black enamel paint and removing old damaged legs of rack shoes steel complete all as specified and directed. Drg No :-FD-E6/MAP/02 ®

S&F in replacement shelves made out of 19 mm round pipe & weld mesh with all exposed steel surfaces black powder coated complete all as specified and directed. Drg No :-FD-E6/MAP/02 (R)

M&L applying one coat of synthetic enamel paint by using spray machine of approved shade to "Almirah steel large half hanging half shelves " including preparation of old painted surfaces complete all as specified , as directed and as shown in drawing. Drg No:- FD/E6/MAP/18

S&F base/legs of "Almirah steel large half hanging half shelves" made out of 20 gauge mild steel sheet including necessary welding and applying two coats of approved synthetic enamel paint over a coat of red oxide primer to match with existing shade including removing the existing unserviceable base or leg complete all as specified,as directed and as shown in drawing . Drg No:- FD/E6/MAP/18

S&F of 150 mm long chromium plated cast iron handle for "Almirah steel large half hanging half shelves " including removing unserviceable handle complete all as specified, as directed and as shown in drawing. Drg No:- FD/E6/MAP/18

S&F of three way locking device with lock box including lock of "Almirah Steel Large half hanging half shelves" including taking out unserviceable locking device with lock box complete all as specified, as directed and as shown in drawing. Drg No:- FD/E6/MAP/18

S&F of 75 mm long mild steel hinge medium weight for door of "Almirah steel large half hanging half shelves" including removing existing unserviceable hinge complete all as specified, as directed and as shown in drawing. Drg No:- FD/E6/MAP/18

S&F of 20 mm dia chromium plated steel conduit pipe hanger rod of "Almirah steel large half hanging half shelves" including removing existing unserviceable hanger rod complete all as specified, as directed and as shown in drawing. Drg No:- FD/E6/MAP/18

S&F in replacement of mild steel sheet 1mm thick as required as per drawing with necessary bending and welding including removing and refixing of serviceable parts including applying two coats of olive green synthetic enamel paint over a coat of red oxide primer on new steel surfaces after preparation of surface complete all as specified, as directed and as shown in drawing. Drg No:- FD-1032,FD-67(M),FD-1031,FD-1034,FD-1029,FD-114(M),FD/E6/MAP/18,FD-257,FD-104(M),FD-81(M),FD-106(M),FD-1008,FD-90(M),FD-1028,FD-69(M)

M&L for Poly urethine P. U. polishing to Chair Dining after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-279

M&L for Poly urethine P. U. polishing to chair Writing after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-280

M&L for Poly urethine P. U. polishing to chair easy after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-229

M&L for Poly urethine P. U. polishing to Chair Dining officer after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD/E6/MAP-II/04

M&L for Poly urethine P. U. polishing to Table dressing Gents after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD/E6/MAP/16

M&L for Poly urethine P. U. polishing to Hat stand with mirror after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-23&233

M&L for Poly urethine P. U. polishing to Peg table after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-27,227,277,&384

M&L for Poly urethine P. U. polishing to Table centre after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-274,235,134

M&L for Poly urethine P. U. polishing to Table bed side after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-28,276

M&L for Poly urethine P. U. polishing to Table dining 06 persons after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: 30,278,273

M&L for Poly urethine P. U. polishing to Teapoy after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-232,278,382.

M&L for Poly urethine P. U. polishing to Side board after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-26,241,372

M&L for Poly urethine P. U. polishing to Binsolid linen Ironing Board after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No:

M&L for two coat spray painting with synthetic enamel paint black to Teapoy Verandah after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-FD/E6/MAP/17

M&L for Poly urethine P. U. polishing to Table bed side MAP after removing the dirt including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD/E6/MAP/15 R

M&L for two coat spray painting with synthetic enamel paint black to Rack shoe after removing the dirt including smoothing all the surface of exposed steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD/E6/MAP/02 R

M&L for two coat spray painting with synthetic enamel paint OG to locker steel after removing the dirt including smoothing all the surface of exposed Steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-257

M&L for two coat spray painting with synthetic enamel paint OG to Almirah medium /Small steel after removing the dirt including smoothing all the surface of exposed Steel portion by using sand paper including filling the pores / joints with putty wherever required complete all as specified and as directed. Drg No: FD-1032

Scheduled Items (Bhubneshwar)

Locker steel (Drg No FD-257) Removing old worn out damaged base legs, S&F 1mm thick MS new legs as per existing shape and size as per drg or directed by Engr-in-Charge.

All as per item No 158 above but shelves

All as per item No 158 above but shutter

All as per item No 158 above but base/ top sheet

Removing of old damaged door lock, S&F new door lock as per sample or as directed by Engineer-in-Charge.

Removing of old damaged CP handle, S&F New CP handle as per sample as directed by Engineer-in-Charge.

M&L for welding to damaged/ decayed steel frame with arc welding as per std workmanship or as directed by Engr-in-Charge.

M&L for two coat spray painting with synthetic enamel paint OG as per drg or as directed by Engr-in-Charge.

Charpoy IP Hard Top Steel/ PBOR (Drg No FD/MAP-II/01) Removing of old damage 12mm BWR ply wood, S&F 12mm BWR ply wood ISI marked as per drg or as directed by Engineer-In-Charge. .

M&L for welding to damage/decayed steel frame all as per drg or as directed by Engr-in-Charge.

M&L for painting steel surface with two coat of Black synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Table Dressing Gents with Mirror (Drg No FD-230,379 FD/E6/MAP/16) Removing of old damage mirror S&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge.

Removing of old damage drawers, S&F new drawers of 12/6 mm thick commercial BWR quality ply with knobs as per drg or as directed by Engineer-In-Charge.

Removing of old damage Top S&F Nes Top of 12 mm thick pre-laminated particale board,as per drg or as directed by Engineer-In-Charge.

Removing of old damage left/right side S&F new left/right side of 12 thick pre-laminated particale board, as per drg or as directed by Engineer-In-Charge.

Removing of old damage back side Ply,S&F new back side Ply as per drg or as directed by Engineer-In-Charge.

Removing of old damage bottom ply, S&F new bottom of 6 mm thick commercial BWR quality ply as per drg or as directed by Engineer-In-Charge.

Removing of old damage back side 6mm ply of mirror, S&F new back side 6mm ply for mirror as per drg or as directed by Engineer-In-Charge.

Removing of old damage long rail of mirror frame including beading , S&F new 25 x 35 mm thick long rail of mirror frame including fitting as per drg or as directed by Engineer-In-Charge.

Removing of old damage short rail of mirror frame including beading , S&F new 25 x 35 mm thick short rail of mirror frame including fitting as per drg or as directed by Engineer-In-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table dining 4 person (Drg No FD-273, FD/MAP-II/03) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing of old damage leg, S&F new 40 x 75 mm thick leg made of 1st class season teak, all as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 180 above but long rail.

All as per item No 180 above but stiffner

All as per item No 180 above but short rail

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Charpoy GI pipe with ply top (Drg No FD-220) Removing of damage UNSV Top plywood , S&F new 12mm thick BWR plywood as per specification or as directed by Engr-in charge

Removing damaged /UNSV long rail, S&F new 32 mm dia BWR dia GI long rail med grade ISI marked threading shall be made up to 22 mm at one end and 40mmon other end complete all as specified & directed by Engr-in charge

Removing of old damaged GI UNSV long rail & fabricated in short rail to charpoy GI pipe threading shall be made upto 22 mm at one end and 40 mm on other end complete all as specified as directed by Engr-in-Charge.

Removing old damaged GI UNSV short rail and fabricated in legs to charpoy GI pipe threading shall be made upto 40 mm complete all as specified as directed by Engr-in-Charge

Removing of old damaged GI three way elbow 32mm dia S&F New GI three way Elbow 32mm dia ISI marked all as specified and directed by Engr-in-Charge.

Removing of old damaged GI 32 mm dia check nut, S&F GI 32 mm dia check nut 10mm thick complete all as specified and directed by Engr-in-Charge.

Removing of old damaged FI clamp from GI charpoy S&F new FI clamps of size 25x3mm welded to GI leg pipe complete all as specified and directed Engr-in-Charge.

Chair Dining (Drg No FD-228, 203, 279, FD/MAP-II/05) Removing of damaged front leg ,S&F new Front leg, as per existing shape and size directed by Engr-in-Charge.

All as per item No 192 but rear leg.

All as per item No 192 but side rail (left/right).

All as per item No 192 but front rail.

All as per item No 192 but rear rail.

All as per item No 192 but back rest.

All as per item No 192 but stiffner.

Removing UNSV plastic cane, M&L for Recanning to Chair with 2mm wide half round plastic cane in Godrej pattern & provided hard PVC toe to each leg as per drg or as directed by Engr-in-Charge.

Removing UNSV PVC sheet and suporting of 2x stiffener of bottom of PVC sheet M&L for Chair PVC sheet, provided hard PVC toe to each leg as per drg or as directed by Engr-in-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Computer (TP, FD/E6/MAP/03) Removing old damaged top, S&F new Top as per existing shape and size, all as per drg or as directed by Engr-in-Charge

Removing old damaged tray S&F new tray as per existing shape and size, all as per drg or as directed by Engr-in-Charge

Removing old damaged shelf S&F new shelf as per existing shape and size, all as per drg or as directed by Engr-in-Charge

Removing UNSV plastic shoes from Leg and S&F new hard plastic shoes of best quality of each leg as per drg or as directed by Engr-in-Charge.

Removing old damage channel S&F New Telescopic channel stainless steel, all as specified shape, size, drg or as per directed by Engr-in-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair CB Steel with Arms (Drg No FD-75) M&L for welding to damage/decayed steel frame of chair steel CB with Arms complete and all as directed by Engr-In-Charge.

S&F flat iron 20x3mm thick welded to steel frame to support of wooden seat to each chair as directed by Engineer-In-Charge.

Removing the old and damage arm rest and S&F arm rest as per drg or as directed by Engineer-In-Charge.

Removing the old damage seat frame, S&F seat frame as per drg or as directed by Engr-In-Charge.

All as per item No 54 above but back rest frame.

Removing UNSV plastic cane of Seat and back rest frame M&L for recanning to seat and back rest frame with 2mm wide half round plastic cane in Godrej pattern including polishing to wooden frame, as per drg or as directed by Engr-in-Charge.

Removing the old UNSV top cap and PVC toes, S&F new PVC top cap and PVC toe to each chair as per drg or as directed by Engr-In-Charge.

M&L for painting to steel frame with two coat of OG synthetic enamel paint as per drg or as directed by Engineer-In-Charge.

Sofa Set 5 seaters with cushion (Drg No FD-281, FD/MAP/06) Removing of old damage seat and back cushion from Sofa Set 5 Seater , S & F New cushion of 100 mm thick 40 density make sleep well/Kurlon duly upholster with tepstry cloth not less than Rs. 250/- Per meter of best quality approved shade and M/L for applying polyurethane (P.U.)polish with high glose finish all exposed wood surface of sofa set 05 seatert as per drg or as directed by Engineer-in-Charges.

Chair Writing (Drg No FD-250,280) Removing of old damaged front leg ,S&F new 30 x 55 mm thick Front leg made of 1st class season teak, as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 217 above but rear leg .

All as per item No 217 above but back rest.

All as per item No 217 above but side rail .

All as per item No 217 above but front/back rail.

All as per item No 217 above but stiffner.

All as per item No 217 above but Hand rest.

Removing UNSV plastic cane,M&L for Recaning with 2mm wide half round plastic cane in Godrej pattern, provide hard PVC toe to each leg as per drg or as directed by Engr-in-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Revolving High back & Computer steel (Drg No FD/E6/MAP/01, TP) Removing of damage UNSV seat cushion and cloth, S&F new seat cushion of 75mm thick 32 density with tapestry cloth duly upholstery complete all as per specification or as directed by Engr-in-Charge.

Removing of damage old UNSV back cushion rest and cloth, S&F new back rest cushion of 75 mm thick 32 density with cloth duly upholstery complete all as per specification or as directed Engr-in-Charge.

Removing of damage UNSV Hydrolic spring , S&F new Hydrolic spring to chair revolving complete all as per specification or as directed Engr-in-Charge.

Removing of damaged old UNSV arm rest, S&F new arm rest as per existing shape and size all as per drg or as directed by Engr-in-Charge.

Removing of damage old UNSV Base frame , S&F new Base frame iron/PVC to chair revolving complete all as per specification or as directed Engr-in-Charge.

Removing of damage old UNSV wheel S&F new wheel to chair revolving complete all as per specification or as directed Engr-in-Charge.

M&L for spray painting with of synthetic enamel paint black as per drg or as directed by Engr-in-Charge.

Table office Clk / Officer steel (Drg No FD-84 1004, 1003) Removing old damaged front/rear rail, S&F new front/rear rail of 25mm MS square pipe 1.6 mm thick as per existing shape and size and as per drg or as directed by Engr-in-Charge.

All as per item No 233 above but side rail.

All as per item No 233 above but legs.

All as per item No 233 above but stiffener.

Removing old damaged Drawers , S&F new steel drawers as per existing shape and size, as per drg or as directed by Engr-in-Charge.

Removing old damaged top of Table, S&F new 18 mm pre-laminated praticale board Top of table as per existing shape and size all as per drg or as directed by Engr-in-Charge.

M&L for welding to damaged/ decayed steel frame of table with arch welding as per std workmanship or as directed by Engr-in-Charge.

Removing old damaged lock, S&F new lock as per existing shape and size complete all as specified and directed by Engr-in-Charge.

Removing UNSV plastic shoes from Leg and S&F new hard plastic shoes of best quality of each leg as per drg or as directed by Engr-in-Charge.

M&L for spray painting of table with synthetic enamel paint OG as per drg or as directed by Engr-in-Charge.

Table dining 6/8 person (Drg No FD-239,269,273,FD/MAP-II/03) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing of old damage leg, S&F new 40 x 75 mm thick leg made of 1st class season teak, all as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 244 above but long rail.

All as per item No 244 above but stiffner

All as per item No 244 above but short rail

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Peg (Drg No FD-384) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing of old damage leg, S&F New 30 x 50 mm thick leg made of 1st class season teak, all as per drg or as directed by Engineer-In-Charge.

All as per item No 250 above but long rail.

All as per item No 250 above but short rail .

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Centre (Drg No FD-274) Removing old damaged top,S & F new Top of 18 mm thick pre-laminated praticale board, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge

Removing old damaged legs , S & F new legs of 30 x 60 mm thick as per existing shape and size, as per drg or directed by Engr-in-Charge.

All as per item No 255 above but long Rail.

All as per item No 255 above but stort rail

All as per item No 255 above but stiffner.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Bed Hard Steel Drg No FD-FD/E6/MAP/08(R) Removing of old damage 12mm BWR ply wood, S&F 12mm BWR ply wood ISI marked as per drg or as directed by Engineer-In-Charge. .

M&L for welding to damage/decayed steel frame all as per drg or as directed by Engr-in-Charge.

M&L for painting steel surface with two coat of Black synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Teapoy (Drg No FD-232, 278,382) Removing old damaged top, S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing of old damage leg, S&F New 30 x 50 mm thick leg made of 1st class season teak, all as per drg or as directed by Engineer-In-Charge.

All as per item No 264 above but long rail.

All as per item No 264 above but short rail .

All as per item No 264 above but stiffner.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair writing Officer steel (FD/E6/MAP/12) Removing of damage UNSV seat cushion and cloth S&F new seat cushion of 75mm thick 32 density with tapestry cloth duly upholstery complete all as per specification or as directed by Engr-in-Charge.

Removing of damage UNSV back cushion rest and cloth, S&F new back rest cushion of 75 mm thick 32 density with tapestry cloth duly upholstery complete all as per specification or as directed Engr-in-Charge.

M&L for welding to damaged/decayed steel frame with arc welding as per std workmanship or as directed by Engr-in-Charge.

Removing of damaged/UNSV arm rest, S&F new arm rest as per existing shape and size all as per drg or as directed by Engr-in-Charge.

S&F flat iron 20x3mm thick welded to steel frame to support chair as directed by Engr-In-Charge.

Removing UNSV plastic shoes from chair, S&F new plastic shoes of best quality as per drg or as directed by Engr-in-Charge.

M&L for spray painting with of synthetic enamel paint black as per drg or as directed by Engr-in-Charge.

Almirah large steel with shelve & half hanging (Drg No FD/E6/MAP/18, 1031, 104 (M)) Removing old worn out damaged base legs, S&F 1mm thick MS new legs as per existing shape and size as per drg or directed by Engr-in-Charge.

All as per item No 276 above but shelves

All as per item No 276 above but shutter

All as per item No 276 above but base/ top sheet

Removing of old damaged door lock, S&F new door lock as per sample or as directed by Engineer-in-Charge.

Removing of old damaged CP handle, S&F New CP handle as per sample as directed by Engineer-in-Charge.

M&L for welding to damaged/ decayed steel frame with arc welding as per std workmanship or as directed by Engr-in-Charge.

M&L for spray painting with synthetic enamel paint OG as per drg or as directed by Engr-in-Charge.

Chair Easy FD--229 Removing UNSV plastic cane,M&L for Recaning with 2mm wide half round plastic cane in Godrej pattern, provide hard PVC toe to each leg and M/L for applying polyurethane (P.U.)polish with high glose finish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Verandha (PVC) (FD-19, 359, FD/MAP-II/06) Removing UNSV seat & back plastic sheet, S&F new seat & back plastic sheet as per drg or as directed by Engr -in- Charge.

Chair Dining Officer. (Drg No FD-E6/MAP/04) Removing old damged seat cushion with plywood from chair, S&F New seat cushion of 75 mm thick 40 mm dinesity Sleep Well/Kurlon with 12 mm BWR plywood duly upholes by with tepestory cloth not less than Rs 250/- per mtr of approved all as specified and M/L for applying polyurethane (P.U.)polish with high glose finish all exposed wood surface as per drg or as directed by Engineer-in-Charge..

DEBASHIS AGENCY (BID ID -3445065)

PRADIPTA KUMAR PANI (BID ID -3444664)

shekhar & company (BID ID -3444256)