Special repair to block No. P-2 married accn at Mil Stn Beas under GE Kapurthala

Amount

Demolition of cement concrete in ground floor/PCC path/Plinth protection and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete of any description and in any position complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excluding precast concrete articles complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

All as per item no. 5 above but area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified.

Taking down cement plaster of any description any thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.

Demolition and breaking up drain pipes 100 mm dia ( salt glazed ware, AC or rienforced concrete ) set in cement mortar complete all as specified and directed.

Dismantling of 100 mm dia cast iron drain pipes set in cement mortar complete all as specified and directed.

M&L for 50mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement all as specified

M&L for brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:4, complete all as specified and directed.

M&L for brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per item No 14 above but using old bricks complete all as specified and directed.

M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified

All as per item No. 17 above but in CM (1:4) complete all as specified and directed.

M&L for 5mm thick plastering in cement mortar (1:3) on concrete surfaces or ceiling etc finished even and smooth without using extra cement as on ceiling complete all as specified.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling surface all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces or unplastered surfaces of ceiling and applying two coats of white wash all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment on wall surfaces and applying two coats of oil emulsion distemper over priming coat complete all as specified and directed by Engr-in-Charge.

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over birla wall care putty on plastered surface preparatory to distempering complete all as specified.

M&L for complete removal of existing treatments on wall surfaces, preparation of old surface and applied one coat of cement base paint all as specified and directed by Engr -in-charge.

M&L for preparing new plastered or unplastered wall surfaces and applied two coats of cement base paint over a coat of primer all as specified and directed by Engr-in-charge.

M&L for non-skid ceramic joint free coloured tiles 7 to 8mm thick area of each tile not less than 400mm x 400mm in floors set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 15mm thick bedding layer in CM 1:4 complete all as specified.

M&L for coloured glazed tiles of size 300mm x 450mmx 7 mm thick fixed with neat cement slurry on vertical surfaces to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified

M&L for 20 mm thick granite as in window cills, cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including bedding layer or screed 15 mm thick in cement mortar 1:4 including cutting , grinding, rounding edges, rubbing and polishing complete all as complete all as specified and directed by Engr-in-Charge.

Material & labour for grinding, rubbing and polishing the old kota/marble stone work with machine grinder as in floors/walls and beading the surface with wax polish complete all as specified and directed.

Material & labour for 20-25mm thick machine cut kota stone slab as in vertical surfaces such as dado/ skirting/pillars/risers of stair case etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbuing and polishing over and including rendering 20mm thick in cement mortar (1:4) complete all as specified and directed. Note - Kota stone for risers of step shall be in single piece.

Supply and fix mild steel framed work as in doors chowkats or frames, cooler stand or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-290 Gde-E-165 complete including drilled for fixing of steel sheeting or other covering; doors, door frames, chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a).

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3.

All as per item No. 34 above but as in gauged windows. as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note for item No 34 & 35 :- Glass / wire gauge/grill painting shall be measured and paid separately. Drg No CEJZ/TD-1019 & 1020, Sheet 1/3 to 3/3 are not being uploaded and the same can be seen in this HQ on any working day

All as per item No. 34 above but ventilator fixed type with glazing bar without wire mesh and glass complete all as specified.

Supply & fix PVC solid door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specifications & drg given in SSR 2010 (Part II), complete all as specified and directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

Material & labour for built in steel Cupboard (shutter and frame) of pressed steel frame of size 75mm x45mm x1.25 mm thick with pressed steel shutter 1.00mm thick Godrej Pattern fixed to masonary walls by hold fast made out of 25 x 3 mm FI embeded in PCC 1 :2 : 4 type B1 complete, incl two coats of spray painting over a coat of red oxide primer on steel surfaces after taking out of old existing cupboard frame with shutters complete all as directed.

S&F aluminum anodized barrel tower bolt of extruded section of size 125mm complete all as specified.

S&F aluminum alloy handle cast type anodised of size 125 mm complete all as specified.

Supply & fix 100 mm size stainless steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and dierected.

Supply & fix 300 mm long ordinary helical door spring , fixed to doors with screws complete all as specified.

Supply & fix mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply & fix MS barrel tower bolt ISI marked 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.

Supply & fix MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed.

Supply & fix 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified

M&L for preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L for preparation of new wood and wood based surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of old painted steel and iron based surfaces of any description over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified

M&L for preparation of old wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Supply & fix 20 mm dia harrison rails mild steel chromium plated with decorative finish , with fixing brackets , stops, rollers (two brackets per 1.5 M length and 08 Nos roller per 1.RM) complete all as specified and as directed

Material & labour for roughening old surface of concrete floors by picking, sweeping cleaning and washing down with water to clean the surface complete all as specified and directed.

Material & labour for 15mm thick screed in CM 1:4 with using WPC complete all as specified and directed. Note : WPC shall be measured and paid separately

Material & labour for 3mm thick superior Atactic Poly propylene modified polymeric membrane waterproofing treatment of weight not less than 3.0 Kg per sqm with properties of high penetration and reinforced with polyster non wove fabric (wt not less than 150gms/sqm) laid on primed surface by forced application, over a coat of hot blown bitumen 85/25 @ 1.2 kg per sqm complete all as specified and all as per manufacturer’s directions. r

Material & labour for 50mm thick PCC padding (1:2:4) type B-1 (using 20 mm graded stone aggregate), as to be provided in slope complete all as specified & directed.

M & L 40mm thick brick tiles laid on bedding layer of CM 1:3 15mm thick and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified

All as per item No 60 above but except tiles complete all as specified

Material & labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sun shades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

M&L for PCC (1:2:4) type B-1(using 20 mm graded stone aggregate) as in roof kerbs, mud stops, coping, rounded or chamfered complete all as specified and directed .

S&F in repair Stop valve, 15 mm dia cast copper alloy with long shank & cup with capstan heads concealed type, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron pipe fixed complete all as specified directed

S&F in repair bib tap cast copper alloy with crutch or butterfly handle screwed for 15mm bore iron pipe fixed incl taking down old tap of any description complete all as specified directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified.

Supply & fix in repairs PVC valveless syphonic action type low level flushing cistern 10 ltr capacity including supply pipe &fixing brackets of MS angle of size (25mmx25mmx3mm) , 30 cm long in PCC 1:2:4 type B-1, block of size (10cmx10cmx10cm) on walls etc complete all as specified and directed.

Supply & fix in repairs vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including 32mm bore waste pipe, brass coupling, ,chromium plated brackets or erecting stand, restoring including 15mm dia pillar taps, cast copper alloy with capston heads chromium plated, screwed down high pressure, with or without lettered with long screwed shanks and fly nuts, screwed for iron pipe but fancy type and fixed etc complete all as specified.

Supply & fix in repairs swivel shower PTMT with shower arm 195mm long with bend of 45 degree, 15mm dia (minimum weight 40 gms) complete all as specified and directed.

S&F CP grating 100mm dia with waste hole complete all as specified and directed by Engr-in-Charge

Taking up or down steel tubing and connections 15mm bore and connections, including cleaning for refixing or removing to store yard complete all as specified and directed,

Taking up of or down steel tubing and connections 20 mm bore and connections, including cleaning for refixing or removing to store yard complete all as specified and directed,

S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

S&F 20mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

Supply & fix in repairs rotational moulded polythene water storage tank triple layer, ISI Marked of capacity 500 litre cylindrical vertical with closed top hoisted in position incl 20mm dia PVC float valve complete including dismantling of existing tank of any description, capacity complete all as specified and directed.

Supply & fix in repairs concealed stop cock fancy type chromium plated 15mm bore, cast copper alloy, chromium plated with long shank screwed down with high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, complete all as specified and directed.

Material & labour for applying and applying evenly a tack coat of industrial bitumen 85 /25 at the rate of 1.2 kg per sqm complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipe of pressure rating 6kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

Material & labour for cast iron soil, waste and vent pipe of bore 100mm, sand cast type in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

Material & labour for cast iron soil, waste and vent pipe of bore 50mm, sand cast type in any length with or without ears with cement joints fixed to wall/laid in trenches and incl dismantling of existing pipes complete all as specified and directed.

Material & labour for cast iron soil, waste and vent pipe of bore 100mm, sand cast type in any length with or without ears with run lead joints laid in trenches or In floors complete all as specified and directed.

Material & labour for cast iron bends (any radius), diminishing pieces or tapers of size 100mm with inspection eye complete all as specified and directed.

Material & labour for cast Iron bends (any radius) ducks foot rest or heal rest of size 100mm complete all as specified and directed.

Material & labour for CI branch pieces single (equal or unequal) ordinary or inverted fitted with oval access door of size 100mm complete all as specified and directed.

Material & labour for CI branch pieces double (equal or unequal) ordinary or inverted fitted with oval access door of size 100mm complete all as specified and directed.

Material & labour for cast iron floor trap outlet diameter 100mm, plain with stainless steel grating including jointing to waste pipe in run lead complete all as specified and directed.

Material & labour for stack clamps suitable for 100mm bore CI pipes, made out of 50 x 5mm flat iron and 16mm dia round iron stays including nuts and bolts and securing end of stays to wall or in roof, complete all as specified and directed.

Material & labour for stack clamps suitable for 50mm bore CI pipes, made out of 50 x 5mm flat iron and 16mm dia round iron stays including nuts and bolts and securing end of stays to wall or in roof, complete all as specified and directed.

Material & labour for bends (any radius), diminishing pieces or tapers of size 100mm complete all as specified and directed.

Material & labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. one brick but not exc. two bricks complete all as specified and directed.

Supply and fix MS work as in angle, joist, channel or tee sections fixed independently,without connecting plates (Fe-290 Gde- E-165) complete all as specified and directed.

Supply & fix sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste coupling, including bedding in cement mortar (1:2) to dwarf wall, or including fixing cantilever brackets, connecting union to pipe and waste down pipe etc overall size 915mm x 460mm x 178mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Material & labour for 19mm thick veneered particle boards interior grade, solid core, general purposes type, with face of decorative veneers on both sides fixed as in shelves complete all as specified and directed.

S&F in repair vitreous china squatting pan WC orrisa pattern size 580 x 440 mm white with integral foor rest with P or S trap incl provn of lime concrete bedding incl breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specifed.

S & F 75 mm bore PVC (SWR) pipe of pressure rating 4kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed laid in trenches or floors complete all as specified and directed.

S&F PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 110 mm complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

S&F PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 75 mm complete all as specified and directed.

Material & labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed.

Material & labour for chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Taking down carefully existing point wiring aluminum/ copper conductor for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS , copper multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite white/ coloured top sheet cover 3.0 mm thick , for one light point/call bell point controlled by one way switch complete all as specified and directed.

All as per item No. 104 above but one 3 pin socket outlet 5 amps on same board with other switches , complete all as specified and directed. .

All as per item No. 104 above but one 3 pin socket outlet 5 amps on independent board, complete all as specified and directed. .

All as per item No. 104 above but one light point controlled by two way switches, complete all as specified and directed. .

All as per item No. 104 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 3 pin socket outlet 15 amps on independent board, complete all as specified and directed.

Supply and fix switch piano flush button type, 5 Amps, 230V AC, single pole, one way complete all as specified and directed

Supply and fix switch piano flush button type, 5 Amps, 230V AC, single pole, two way complete all as specified and directed

Supply and fix switch piano flush button type, 15 Amps, 230V AC, single pole, one way complete all as specified and directed

S&F socket outlet 5 pin, 5 amps, multi pin flush type, complete all as specified and directed. .

Supply and fix switch socket combination outlet universal type multi purpose 2 in 1, 3 pin 5/15 Amp flush type 230/250 volts AC with ISI marked on independent board complete all as specified.

Taking down old u/s FTL fitting 36/40 watt any type and Supply & fix surface mounting energy saving LED CRCA batten light complete with retrofit T8 polycarbonate LED tube rod, 1x20W, 230V ()white complete with all accessories all as specified and directed by EIC. Make : Crompton cat part No. DMLN1T8-16 LED Rod LTT8-20 or C&S Cat Part No. LTDC01220WLED/WD or equivalent as mentioned in appendix 'B'

Supply & fix MCB, single pole 6 to 32 amps 240 volts B series complete all as specified and directed.

Supply & fix MCB, 32 amps SPN 240 volts, B series complete all as specified and directed.

Supply & fix in repairs sheet metal enclosures with double door, detachable gland plates flush mounting for MCBs fitted with 200 amps rated bus bar earth wire and neutral link, 8 ways 240 volts complete all as specified and directed.

Supply and fix ceiling rose surface bakelite 65 x 50 mm three terminal PVC / Polycarbonate isolated body complete all as specified.

Supply and Fix angular lamp holder, insulated body with back plate suitable for batten fittings including 1 x 9 W LED lamp complete all as specified and directed.

Hanging only ceiling fan any sweep including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose/connector to fan and GI pipe of suitable size incl steel rod, clamps, hooks, nut bolts etc as required complete all as specified. Note : Ceiling fan retrieved from dismantling shall be refixed as directed by Engr-in-Charge.

Supply and fixing stepped type electronic fan regulator five steps and connecting up complete 230/250 volts as directed by Engr-in-charge.

Taking down old unserviceable bulkhead fitting and supply & fix 6 watt LED bulkhead fitting in engineering plastic housing with clear prismatic diffuser including LED 6 Watt with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. Make : C&S cat part No. CG80IBWLED or equivalent makes as in Appx 'B'

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of theplate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit (II) PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed. .

Disconnecting and Taking out old u/s cable of service connection/sub main of any size from pole to DBs/main switch complete all as specified and directed.

Material and labour for sub main wiring in repairs with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 2x 6 sqmm and 1x6 sqmm, 1100 volts grade drawn through in & including PVC conduit 25mm dia & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 6 sqmm and one run of 6 sqmm earth wire alongwith PVC conduit shall be measured and paid as one unit only.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for taking out/laying of under ground cables and getting out soft/loose soil complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Removing surplus spoil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

Supply & lay for old size sub class ‘B’ bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed.

Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15 cm aboce the cable complete all as specified and directed. Note: Punned down thickness shall be measured

Supply and lay cable XLPE/PVC insulated screened PVC bedded armoured and with aluminium conductor 1100 volt grade 35 sqmm 3.5 core laid in trenches in floor, in ducts, through pipe or fixed along the pole complete all as specified and directed. Note:- 1. Excavation, earth work, sand cushioning, and brick protection shall be measured and paid for separately. 2. Rate of necessary lugs, thimbles and jointing material shall be included in unit rate.

Supply and fixing LED bldg security light fitting 15 watt IP 65 powder coated pressure die cast aluminium compact high power LED bldg security light including 1.5 mtr long 40mm bore GI pipe bracket made to shape for fixing on wall/pole with 40mm x 6mm flat iron clamp 02 numbers including 16 mm dia bolts, nuts and washers complete all as specified and directed by Engineer-in-Charge. Make:- C&S product code DRACO/15W ordering code-E15 or equivalent in make mentioned in Appx 'B' Note :- Contractor shall provide 2 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion.

Supply and fix call bell ding dong AC single phase 230 volts including wooden/PVC board of suitable size, connecting and testing complete all as specified and directed

Material & labour for galvanised iron tubes 40mm bore, light grade with & including all fittings fixed to wall/on poles, ceilings and or laid in floors/road crossing etc as in cable protection complete all as specified and directed.

Supply and fix in replacement metal body exhaust fan 300mm sweep, 900 RPM, single phase, 230 Volts heavy duty with louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, making opening in the wall as required, fixing the fan with suitable size of nut, bolt washer and making good the disturbed surfaces as per existing complete all as specified and directed.

DUGGAL CONSTRUCTION CO

COSMO BUILDERS

M/s. Nirmal Singh