Erection , Testing and Commissioning of 33/11KV, 2X3.15MVA, SubStation at Patlander(Ansla) including Civil work under Electrical Division HPSEBL Hamirpur in Operation Circle Hamirpur

Amount

A Transformer(s) 33/11kV Substation

Power Transformer (3.15 MVA, 33/11 kV, ONAN, OLTC, Outdoor)

Station Transformer (100 kVA, 33/0.4 kV)

33 KV Switchgear & Allied Equipment

33 kV Control and Relay (CR) Panel (with Numeric Differential Relay, IEC 61850)

33 kV Control and Relay (CR) Panel (33 kV Incomer Bus) [Numeric Relay, IEC 61850]

33 kV VCB (36 kV, 1250A, 26.2 kA, Outdoor Type)

36 kV Isolator (1250 A, 25kA, with Earth Switch)

36 kV Isolator (1250 A without Earth Switch)

33 kV LA /Surge Arrester (30 kV, 10KA, Station class, ZnO, Porcelain)

33 kV Current Transformer

i) 400-200/1-1-1 (for line bay)

i) 200-100/1-1-1-1 (for t/f bay)

33 kV Potential Transformer (33 kV/110 V, 1Φ, Multi-Core, Outdoor), (1No. per Φ)

33 kV Drop Out Fuse Unit (33 kV, Expulsion)

12 kV 1250A Indoor swtich gear panel for 02 No. incomer , 1 No. Bus Coupler &6 no. outgoing feeder

11 kV LA/ Surge Arrester (9 KV, Station Class, ZnO, Porcelain, Outdoor)

11 kV Isolator (12 kV, 1250 A, 25 kA, for 3 sec withEarth Switch, Outdoor)

CAPACITOR BANK:- (REC Spec. 19/1981)

Indoor type auto switching 1200 Kvar Capacitor Bank

BAY MARSHALLING kiosk BMK)

Cable Trays Perforated type, 3mm thickness

300mm width

150mm width

CT Junction Boxes

PT Junction Boxes

GENERAL EQUIPMENT:-

Battery Bank with Battery Charger (15 No x 2V Cell, Lead Acid, 30 V, 100 AH)

Distribution Panel (30V, DC)

Distribution Panel (415 V, AC)

B 33 KV Super Structure and Bus-bar for 33/11 kV S/Stn. SUPER STRUCTURE

(i) R.S. Joists, size 13000x225x150 mm (12X13X33.9=5.2884 MT)

(ii) R.S.Joists, size 4200x225x150 mm supports for lightening arrester and CT's. (iii) M.S. channel iron 125x65 mm, X-arm for bus-bar,isolators,LA's,transformer etc. (iv) M.S. angle iron 65x65 X-arm for body supports belt of station transformer (vii) Nuts & Bolts with Washers off sizes

BUS-BAR

(i) 3 disc insulators tension string complete with fitting

(ii) ACSR conductor 200 mm²

(iii) Tee connections

(iv) PG clamps

(v) Pin Insulator (Porcelain 36KV , 90KN)

C 11KV Super Structure and Bus-bar SUPPORTS

(a) Steel tubular pole 11 m long for 6 nos. out going Feeder & 2 No. Incoming feeder

(b) RCC muffs & concreting thereof for 6 nos. out going Feeder

© Stay set (Complete in all respect

CROSS ARMS

(a) 3.75 m long M.S. channel iron 100X50X5 mm 9.56 kg/m Cross arms for Sub-Station With 6 nos. out going Feeder

(b) 3.75 long M.S. angle iron 50X50X5 mm 4.5 kg/m Cross arms for Sub-Station With 6 nos. out going Feeder

(c) M.S. half clamps with nuts & bolts for S/Stn with 6 nos. out going Feeder

Nut Bolts of various sizes

BUS-BAR

(i) Single insulators tension string for S/Stn with 6 nos. out going Feeder

(ii) ACSR 200 mm² Conductor for 6 nos. out going Feeder for:-

(a) Bus-bars

(b) Jumpers & 9 sets of jumpers at 2.5 m Average

(iii) Disc Insulator Insulators (Porcelain, 12 kV, 90KN): for 6 nos feeder

(iv) Clamps for 6 nos. out going Feeder

Earthing of 33 kV yard & equipment & 22 kV or 11 kV panels M.S. flat 50x6mm, wt. 2.4 kg/m at 5% wastage:- (a) Transformer Earthing at 3 points (body & neutral) at 10 Mtr. each (b) For 3 Set of LA's at 20 Mtr. each (c) For 4 nos. 33 kV super structure at 20 Mtr each (d) For VCB & CT body earthing at 10 m each (e) For earthing of 11 KV Super Structure 80 M each (f) For earthing of 11 KV Super Structure 15 M each

Welding of risers and corrosion protection @ 5% of Sr.No.2

GI wire no. 6 SWG for screening etc.

Eye block for screening

Tumbuckle for Screening

D2 Material Earthing electrode (pipe type)

G.I. Pipe 50mm dia with holes of 16mm dia at 150mm from centre to centre for 2m Distance from bottom

Workshop charges 5% on item no.1

M.S. plates 150x150x6mm for two connection

50x6 mm M.S. flat connection with the mat to mat

Nuts & bolts galvanized 16mm dia, 50mm long

Chequred plate cover 500x500x6mm i.e. 11.8 kg.

E Yard lighting for 33/11 kV Sub-Station

9 Mtr. Steel Tubular poles for yard lighting along with GI extension

40W LED Lamp complete with fittings

Post Erection for gate

Clamps for GI pipe bracket

Underground cable 16 mm² for yard lighting

PVC cable size 6 mm² for connecting LED lamp supply

Junction box

Road Lighting

Steel Tubular Poles with bracket (Pole designation 410SP-32)

50W LED complete with lamp and all accessories for road lighting

Post top Luminaire with opal diffuser mounted on cast alluminium capsule with 20 W LED lamp

Indoor lighting distribution board

Outdoor sub-lighting distrubution board

F Contol Cables (Un-screened)

2x2.5mm2 control cable

4x2.5mm2 control cable

7x2.5mm2 control cable

12x2.5mm2 control cable

19x2.5mm2 control cable

2x4mm2 control cable

3.5 core 95mm2 aluminum cable suitable for 415V,AC

70mm2 multi strenght copper cable for connection from battery to battery charger

Contol Cables (Screened)

4x6mm2 Control Cable

Power and Control Cables

11kV, 1cx240mm2 XLPE Power cable for incommer with indoor and outdoor termination kits

11kV, 3cx240mm2 XLPE Power cable for outgoing feeder with indoor and outdoor termination kits

LT Cable Alluminium Conductor(Unarmoured)

LT Cable Copper Conductor

4cx4mm2 unarmoured

4cx10mm2 armoured

G Portable Fire Extinguishers complete with mounting arrangement.

Dry Chemical MAP 90 Type (Battery Room)

HFC 227 Clean Agent (Control Room)

Water Mist Type CAF

50 Ltr. (For each Power Transformer)

9 Ltr. (Control Room)

Bucket stand with 5 Buckets in each

Civil work to be entered in Coloumn M

H NOW :- Providing Electrical installation

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group-C

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. Modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group-C

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x6 Sq. mm.

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

(a) 3x1.5 Sq. mm.

(b) 6X1.5 Sq.mm.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

(a) S.P. 5/ 6 Amps one way Modular switch.

(b) 5 pin, 5/ 6 Amps Modular socket outlet.

Supplying & fixing Modular blanking plate on the existing modular metal box as required:-

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required:-

Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (25.4mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required.

(a) 32 Amp. Category-A

Providing and fixing following rating, four pole, 415 volts, On- Load change over switch unit, AC 23 A duty, in sheet steel enclosure, with side handle operation, including drilling holes on the board, making connections, etc. as required.

(a) 63 Amps.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

(a) 100 Amp. -16 KA

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

(a) 6 Amps.Single pole. Cat-A.

(b) 16 Amps.Single pole. Cat-A.

(c) 25 Amps.Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

(a) 40 Amps.Double pole. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

(a) 40 Amps.Double pole. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.

(a) Double door-8 way

(b) Double door-12 way

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

(a) 35 Liter capacity water heater (Cat-A)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

(a) Ceiling Fan 1200 mm sweep, Category-A

S/F of Exhaust fan (Plastic) with louver shutter 300 mm.1000 RPM. 1125 Air Delivery (CMM) Bajaj make DxI model on the existing opening,in/c making proper hole and providing 6 mm.ply board cover complete with connections etc,as required.

Supplying and fixing Fancy wall bracket Decon make,Srilanka model Cat.No. 05OQ containing GLS lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Supplying and fixing of Mirror light/Dressing light Philips make model No.915004565401 Cat NO.31083 Shelline 9 watts wall lamp LED complete with connections etc,as required.

Supplying and fixing Fan box made of M.S.sheet with iron rod Hook 12 mm.in place of Junction box complete as required.

Providing and fixing LED surface/pendent mounting Tube fixture 36 watts Crompton make Cat.No.LDL-36-CDL 5700K integrated LED batten of length 1200 mm.ceiling light with high performance,commercial grade solution dacorative end caps,complete with all accessories, connections,testing and commissioning etc,as required.

Supplying and laying G.I.pipe of 40 mm. dia (Heavy duty) under ground 1.00 mtr.below ground level for laying the wires/cable etc,as required.

Supplying and laying G.I.pipe of 100 mm. dia (A class) under ground 1.00 mtr.below ground level for laying the wires/cable etc,as required.

Supplying and fixing Surface mounting LED.18 watts "Sleek " surface mounting round LED downlight for soft diffuser lighting Bajaj make Cat.No.111948 BGSLO Sleek surface 18 WH RD complete with connections etc,as required.

Providing and fixing street light LED 60 watts of Bajaj make EDGE Series Cat No.169680 BRTFG 60 W.LED or its equivelent make with Pressure die cast aluminium housing LED street light Luminaires i/c conduit pipe bracket,nut,bolts and connections etc,as required,complete in all respects as per best satisfaction of Engineer-in-charge at site.

Providing and fixing street light LED 25 watts of Jaquar make Cat.No.LSRT01S025XC with Pressure die cast housing with epoxy power coated dark graphite grey colour finish,Prismatic polycarbonate cover with individual LED Lence i/c conduit pipe bracket,nuts & bolts and connections etc,as required,complete in all respects as per best satisfaction of Engineer-in-charge at site.

Supplying and fixing Switch & socket combind unit 25 amps Havells make Cat.No. AHL0252504 complete with connections etc,as required.

Supplying and fixing of Indicating Bell (6 Module) for call display with name plate,Goldmedal make cat.No.106567 complete with connections etc,as required.

I Providing water supply and sanitary installation for Control Room Building (Single storey )

Providing and fixing to wall ceiling and floor galvanized mild steel tubes ( medium grade) tube fittings and clamps includind making good the wall. (3.2)

Providing and laying in trenches galvised mild steel tubes 15mm nomial size or more (Main supply line to site of work) (3.5)

Constructing chamber with RCC top slab in cement concrete (1;2:4) mix inside 800x800x500 mm deep i/c C.I cover wih 0.23 mtr thick wall of brickes. (4.42/1)

P/F PVC water storage tank 1000 ltrs capacity complete with all accessories. (3.114/2)

P/F PVC floor trap of self cleaning design complete including cost of cutting and making good the walls and floors.

providing &fixing 100mm dia steel grating for traps (25)

Providing & fixing PVc pipes 150mm dia (84)

Providing & fixing CP Brass stop cock/bib cock 15mm dia (3.69)

Proving & fixing vitrous china wash down water closet anglo indian or eropeaon (3.25)

Proving & fixing 10/12.50 ltr pvc low level flushing cistren.(1.62/2)

Proving & fixing vitrous china wash basin 550x400 mm flat back (3.39/2)

Proving & fixing vitrous china padestel for wash basin(3.40)

Proving & fixing cp brass waste for wash basin(3.47)

Proving & fixing PVC waste pipe for wash basin for wash basin(10)

PVC connection 450mm long 15mm nominal bore (3.94)

Providing and fixing 600*450 mm bevelled edge mirror of suprior quality (3.52)

Providing and fixing CP brass Towel rail 600*20 mm (3.53)

Providign and fixing CP Brass soap dish (3.57)

Providing and fixing CP brass pillar cock (3.68)

Providing and fixing vitrous china large size urinals with integral longitudinal flush pipe (3.92)

providing and fixing single hole basin mixing facicet (3.75)

Providing and fixing brass full way valve/with wheel 15 mm nominal bore.

providing and fixing float valves

Providing and fixing ferrule 15 mm nominal bore (3.106)

providing and fixing PVC door bend with ovel acess 100 mm dia(3.118)

providing and fixing GI uniun 15 mm normal bore

Excavation in foundation trenches etc in earth work

J Sub-Head: Counstruction of Control Room Building (Ground Floor)

Excavation in foundataion trenches etc. in earth worki, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in t.o plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in all kinds of soil.

Providing & laying cement concrete 1:3:6 (1 cement:3 Sand: 6 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth.

Providing form work with steel plates 3.15mm thick welded with angle iron frame including centring, suttering, strutting and propping etc with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu reinforced concrete and plain concrete work in

a) foundation footings bases of columns and mass concrete.

(b)Columns, pillars, posts and struts.

c) Flat Surfacees such as soffits of suspended floor roof landing the like.

d) Edges of slabs and breckets in floor and wall under 20 cm wide

e) Staircase with sloping or stepped soffits including risers and stringers excluding landing.

f) Beam contilivers girders and lintals sides and sofit of beam beam haunchings contiliver girders bressumers and lintals not exceeding 1.00 mtr in depth.

Providing & laying cement concrete 1: 1.5:3 (1 cement: 1.5 Sand: 3 graded Stone aggregate 20mm nominal size) & curing complete excluding cost of form work and reinforcement for RCC work in:-

a) foundation footings bases of columns and mass concrete

b) Columns,pillar posts and stourts up to floor two level

c) Suspended floors, roofs landings and shelves and their supports balaconies, beams girders, and cantilevers upto floor to level.

(d) Staircase (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.

Providing mild/tor steel reinforcement for RCC work i/c bending binding and placing in position complete.

Brick work using common brunt clay building brick in foundation and plinth in CM 1:5 in second class bricks

Half in brick masonary in common brunt clay building bricks in CM 1:4 in second class brick.

6 mm cement plaster to ceilings in cement mortar 1:3 (1cement: 3 sand)

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two leveling including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth 1:5 ( 1 cement : 5 sand ).

20 mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two leveling including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth 1:5( 1 cement : 5 sand ).

Filling in plinth with sand under floor i/c watering ramming consolidating and dressing complete.

Stone soling properly hand packed

Providing & laying cement concrete 1:4:8 (1 cement: 4 Sand: 8 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars,ladders,railling,brackets and similar works.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In Charge.

a) For doors windows and ventilatiors and glazed partitions frames.

b) For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fitting swhere ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item;

a) Glazing with glass panes of 5.50mm thickness (weight not less than 13.75 kg/ sqm.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge I/c making good the floors.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint other then white brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter : paint other than white.

Providing under layer for plinth protection of 75 mm thck.(un consolidated ) bed dry briks/stone aggregate 40 mm nominal size with ramming and consolidating and grouting with fine sand including prepration of ground.

Providing plinth protection 50 mm tnick in Cemente concrete 1:3:6.( 1:cement:3 sand:6 greded stone 20 mm nominal size.

P/F MS holder bat clamps to CI/PVC pipes in CC block 10x10x10 cm of CC 1:2:4 mix including holes and making good the walls; 100 mm dia

Providing and fixing on wall face PVC (D-Plast or equivalent)) rain water pipes of working pressure not less than 4.5 kg/sqcm including filling the joints with approved adhesive complete; 100 mm dia pipes.

Providing and fixing on wall face PVC (D-Plast or equivalent)) accessories for rain water pipes including filling the joints with approved adhesive complete; 100 mm dia pipes.

a) PVC plain bend 100mm dia

b) PVC shoe 100mm dia

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.

Providing and fixing bright finished hard drawn hooks and eyes. 150 mm long

K Construction of Septic tank for Control Room Building (Ground Floor) of Sub-Station

Excavation in foundation trenches etc. in earth work lift up to 1.5mtr stacking the excavated soil not more than 3mtr clear from the edge of the excavation and then returning the stacked soil in 15CM layer when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20mtr. in pick work (HPSR-2009 07040200)

Providing and laying C.Conc. (1:2:4) one cement : 2sand : 4 graded stone aggregate20 mm nominal size & curing complete excluding the cost of form work in foundation & plinth (HPSR-2009 09160100)

Providing and laying C.Conc. (1:5:10) one cement : 5 sand : 10 graded stone aggregate 40mm nominal size with 15% plum & curing complete excluding the cost of form work in foundation & plinth (HPSR-2009 09510000)

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering, shuttering, strutting, proping and centering below supporting floor to ceiling not exceeding 4mtr and removal of the same for in situ reinforced concrete and plain concrete work in:-

Boulder filling behind retaining walls (HPSR-2009 1133000000)

Providing and laying C.Conc. (1:2:4) one cement : 2sand :4 graded stone aggregate 20mm nominal size for reinforced concrete work & curing complete excluding the cost of form work in slab & plinth (HPSR-2009 09160100)

Brick work using common burnt clay building bricks in cement mortar (1:6) one cement six sand

Providing tor steel reinforcement

Providing and laying PVC pipe 100 mm to 150 mm dia

provding and fixing CI covers

15 mm cement plaster on inerside of the sptic tank

L Rain water Harvesting Tank

Excavation in foundataion trenches etc. in earth work, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in t.o plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in all kinds of soil.

Providing & laying cement concrete 1:6:12 (1 cement:6 Sand: 12 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth.

Providing & laying cement concrete 1:3:6 (1 cement:3 Sand: 6 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth.

Brick work using common brunt clay building brick in foundation and plinth in CM 1:5 in second class bricks

Providing & laying cement concrete 1: 2:4 (1 cement: 2 Sand: 4 graded Stone aggregate 20mm nominal size) & curing complete excluding cost of form work and reinforcement for RCC work in:-

a) foundation footings bases of columns and mass concrete

Providing mild/tor steel reinforcement for RCC work i/c bending binding and placing in position complete.

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement: 50 mm thick.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two leveling including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth 1:5 ( 1 cement : 5 sand ).

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqcm including filling the joints with approved adhesive complete; 100 mm dia pipes.

Providing and fixing on wall face PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete; 100 mm dia pipes.

a) PVC plain bend 100mm dia

P/F MH covers (600x450)

Providing form work with steel plates 3.15mm thick welded with angle iron frame including centring, suttering, strutting and propping etc with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu reinforced concrete and plain concrete work in

a) foundation footings bases of columns and mass concrete

M Site development

Cutting in earth work and disposal of excavated earth upto a lead of 20 metres:-50% pick & 50% jumper

Carriage of excavated earth by mechanical means for disposal in the dumping area for a lead of 5 Km.

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering n::Foundations and plinth:

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 Graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering, shuttering, strutting, proping and centering below supporting floor to ceiling not exceeding 4mtr and removal of the same for in situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions and the like including attached pillaster butresses, plinth and string courses and the like Vertical Surfaces such as walls.

Providing and fixing PVC pipe 75 mm Dia for weep holes in retaining walls/Breast walls.

Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately).

N SUB-HEAD:- CONSTRUCTION OF ROADS

Excavation in foundataion,s trenches etc. in earth worki, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in t.o plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts in all kinds of soil

Stone soiling properly hand packed filling interstices with kharanja stone and consolidating with power road roller to be required gradient and comber including spreadong watering and rolling of binding materials moorum or earth etc. complete as per HPPWD specification 100 mm spread thickness as per direction of engineer in charge.

Providing & laying cement concrete 1:3:6 (1 cement:3 Sand: 6 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth in all leads and lifts.

Providing & laying cement concrete 1:2:4 (1 cement:2 Sand: 4 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth in all leads and lifts.

O CONSTRUCTION OF TRANSFORMER FOUNDATION. (POWER TRANSFORMER AND STATION TRANSFORMER)

Excavation in foundataion trenches etc. in earth worki, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in t.o plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts in all kinds of soil

Providing & laying cement concrete 1:3:6 (1 cement:3 Sand: 6 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centring shuttering & proofing etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu reinforced concrete and plain concrete work in:

a) Foundation footing,bases of column and mass concrete.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 Sand: 3 graded Stone aggregate 20mm nominal size) & curing complete excluding cost of form work and reinforcement for reinforced concrete work in plinth foundation.

(a) Foundation footings, bases of columns and the like and mass concrete

Providing tor steel reinforcement including bending, binding and placing in position complete.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two leveling including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth 1:4 ( 1 cement : 4 sand ).

Steel work welded in built up section trusses & framed work including cutting, hosting & fixing in position and applying a priming coat of red lead paint : in beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

CONSTRUCTION OF JOIST FOUNDATIONS,

Excavation in foundataion,s trenches etc. in earth worki, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in t.o plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts in all kinds of soil.

Providing & laying cement concrete 1:3:6 (1 cement:3 Sand: 6 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centring shuttering & proofing etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu reinforced concrete and plain concrete work in:

a) Foundation footing,bases of column and mass concrete.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 Sand: 3 graded Stone aggregate 20mm nominal size) & curing complete excluding cost of form work and reinforcement for reinforced concrete work in:

(a) Foundation footings, bases of columns and the like and mass concrete

Providing tor steel reinforcement including bending, binding and placing in position complete.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two leveling including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth 1:4 ( 1 cement : 4 sand ).

Steel work welded in built up section trusses & framed work including cutting, hosting & fixing in position and applying a priming coat of red lead paint : in beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

CONSTRUCTION OF FOUNDATION OF CT

Excavation in foundataion,s trenches etc. in earth work, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in t.o plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts in all kinds of soil

Providing & laying cement concrete 1:3:6 (1 cement:3 Sand: 6 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centring shuttering & proofing etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu reinforced concrete and plain concrete work in:

a) Foundation footing,bases of column and mass concrete.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 Sand: 3 graded Stone aggregate 20mm nominal size) & curing complete excluding cost of form work and reinforcement for reinforced concrete work in:

(a) Foundation footings, bases of columns and the like and mass concrete

Providing tor steel reinforcement including bending, binding and placing in position complete.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two leveling including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth 1:4 ( 1 cement : 4 sand ).

CONSTRUCTION OF FOUNDATION VCB

Excavation in foundataion trenches etc. in earth work, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in to plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts in all kinds of soil.

Providing & laying cement concrete 1:3:6 (1 cement:3 Sand: 6 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centring shuttering & proofing etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu reinforced concrete and plain concrete work in:

a) Foundation footing, bases of column and mass concrete.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 Sand: 3 graded Stone aggregate 20mm nominal size) & curing complete excluding cost of form work and reinforcement for reinforced concrete work in:

(a) Foundation footings, bases of columns and the like and mass concrete

Providing tor steel reinforcement including bending, binding and placing in position complete.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two leveling including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth 1:4 ( 1 cement : 4 sand ).

CONSTRUCTION OF BAFFLE WALL

Excavation in foundataion,s trenches etc. in earth worki, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in t.o plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts in all kinds of soil

Providing & laying cement concrete 1:3:6 (1 cement:3 Sand: 6 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centring shuttering & proofing etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu reinforced concrete and plain concrete work in:

a) Foundation footing,bases of column and mass concrete.

(b) Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 Sand: 3 graded Stone aggregate 20mm nominal size) & curing complete excluding cost of form work and reinforcement for reinforced concrete work in:

(b) Walls (any thickness) but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses etc from top of foundation level upto floor two level.

Providing tor steel reinforcement including bending, binding and placing in position complete.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two leveling including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth 1:4 ( 1 cement : 4 sand ).

P/F 50mm dia PVC pipes for weap holes/ blow holes including cutting and fixing in position complete.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

CONSTRUCTION OF CABLE TRENCHES

Excavation in foundataion trenches etc. in earth worki, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in t.o plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts in all kinds of soil

Providing & laying cement concrete 1:3:6 (1 cement:3 Sand: 6 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centring shuttering & proofing etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtr and removal of the same for insitu reinforced concrete and plain concrete work in:

a) Foundation footing,bases of column and mass concrete.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 Sand: 3 graded Stone aggregate 20mm nominal size) & curing complete excluding cost of form work and reinforcement for reinforced concrete work in:

(a) Foundation footings, bases of columns and the like and mass concrete

Providing tor steel reinforcement including bending, binding and placing in position complete.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two leveling including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth 1:4 ( 1 cement : 4 sand ).

Steel work welded in built up section trusses & framed work including cutting, hosting & fixing in position and applying a priming coat of red lead paint : in beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

P/F 75 mm thick RCC Covers in Cement concrete 1:1.5:3 (1 cement:1.5 Sand: 3 graded Stone aggregate 20mm nominal size) including outer peripheral frame of angle iron 40x40x5 mm, reinforcement and necessary handle for lifting as directed by the EIC.

P/F MS Chequered plates 3.15 mm thick including cutting,finishing smooth, providing necessary MS handles for lifting as directed by the EIC.

P/F 50mm dia PVC pipes (D-Plast or equivalent) for weap holes/ blow holes including cutting and fixing in position complete.

PROVIDING, LAYING AND SPREADING SAND & AGGREGATE IN SUB-STATION YARD.

Filling in plinth with sand under floor i/c watering ramming consolidating and dressing complete.

Providing and laying crushed stone aggregates 20mm to 40 mm nominal size including uniformly spreading in the Sub-Station Yard as directed by the EIC.

Providing and spraying Weedicide of approved brand and manufactures as directed by the EIC.

P FENCING

SUB-HEAD:- CHAIN LINK FENCING AROUND THE 33KV & 11 KV YARD.

Excavation in foundataion,s trenches etc. in earth worki, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in t.o plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts in all kinds of soil.

Providing & laying cement concrete 1:6:12 (1 cement:6 Sand: 12 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth in all leads and lifts.

Providing & laying cement concrete 1:2:4 (1 cement:2 Sand: 4 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth in all leads and lifts.

Steel work welded in single sections including cutting, hosting & fixing in position and applying a priming coat of red lead paint : in RS joists channels ,angles , tees.

Supplying and fixing woven plains G.I. wire fencing of mesh 50mm to 150mm to any type of standard rails, strainging bolts. etc. including provision of binding wire, staples etc.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint other then whitebrusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter : paint other than white.

SUB-HEAD:- Barbed wire fencing around the board land.

Excavation in foundataion,s trenches etc. in earth worki, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in t.o plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads and lifts in all kinds of soil

Providing and fixing 1.80 metre long RCC fencing post as per approved design (earth work to be paid for separately)

Providing and fixing 2.00 metre long RCC fencing struts as per approved design (earth work to be paid for separately)

1.20 metre high fencing (as per approved design) 1.80 metre RCC posts, 3 metre centre to centre and RCC struts with 9 horizontal lines and two diagonals of galvanised steel barbed wire (IS 278-1962 type-I) weighing 9.38 kg/100 metres (minimum) strained and fixed to posts by tying to 6 mm galvanised steel bar nails/clips with GI binding wire (cost of RCC struts and straining bolts shall be paid for separately)

Providing & laying cement concrete 1:2:4 (1 cement:2 Sand: 4 graded Stone aggregate 40mm nominal size) & curing complete excluding cost of form work in Foundation & Plinth in all leads and lifts.

SUB-HEAD:- PANNEL FENCING AROUND 33KV SUB-STAION COMPLEX.

Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Sand) First Class Bricks

Steel work welded in single section including cutting, hosting & fixing in position and applying priming coat of Red lead paint. In R.S. Joists, Channels, angles, tees.

Pointing on brick work with cement mortar 1:4(1 cement:4 nsand).

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials

Painting two coats (excluding priming coat)on new steel and other metal surfaces with readymixed paint acid resisting brushing to give an even shade including cleaning of all dirt,dust and other foreign matter.

Half brick masonry in common burnt clay building bricks in Cement Mortar 1:4 (1 cement : 4 sand) First Class Bricks.

Ratwan Light House

S.S. Enterprises