Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.8 LAccepted-AOC | ₹4.8 L | 1 | Accepted-AOC Being L1 |
| 2 | 2₹4.8 LRejected-Finance BASSIAN UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | ₹4.8 L | 2 | Rejected-Finance Not L1 |
| 3 | 3₹5.0 LRejected-Finance SMVDU ENGG TENDERS 25 109 | JAMMU | JAMMU AND KASHMIR | 180001 | ₹5.0 L | 3 | Rejected-Finance Not L1 |
Updated dates
Tender Value
₹6.6 L
EMD Value
₹13,200
Closing Date
13 Feb 2026, 3:00 pmClosed
University Engineer
SMVDU
Renovation of Mess Kitchen Dining Pantry Area of Guest House at SMVDU Kakryal Katra
2026_SM_302139_1
SMVDU/Engg/Tenders/26/141 Dated 03-02-2026
Open Tender
Civil Works
45 days
SMVDU Kakryal Katra
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
REGISTRAR SMVDU
₹13,200
13 Mar 2026
3 Feb 2026
16 Feb 2026
3 Feb 2026
13 Feb 2026
3 Feb 2026
Renovation of Mess / Kitchen, Dining / Pantry Area of Guest House at SMVDU, Kakryal, Katra
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with in 50 meters lead.
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of engineer- incharge
P/L cement concrete- all work upto plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm (nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
Thermo-Mechanically Treated bars of grade Fe-500D or more. Reinforcement TMT Steel Bars For Sump, Septic Tank & Soakage Pit Slab
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for:
Foundations, footings, bases of columns etc. for mass concrete
Suspended floors, roofs, landings, balconies and access platforms.
Edges of slabs and breaks in floors and walls (Under 20 cm wide)
Brick work with common burnt clay (non-modular) bricks of class designation 75
Cement mortar 1:6 ( 1 cement : 6 coarse sand)
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :
Cement mortar 1:4 ( 1 cement : 4 coarse sand)
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):
Sal wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately
Second class deodar wood(30mm)
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (35 mm)
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :
Second class deodar wood (35 mm)
Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete.
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete.
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Twin rubber stopper
Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Double Charged)
Size of tile 600x600 mm In colour such as White, Ivory, Grey,Fume Red Brown FLOOR TILE --600X600
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. (double charged)
Size of tile 800x800 mm
Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.
Grouting the joints of flooring tiles having joints of 3 mm width, using grouting and finishing complete as per direction of Engineer-in-charge.
12mm Cement plaster finished with a floating coat of neat cement of mix:
1 : 4 ( 1 cement : 4 fine sand)
12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 coarse sand)
15mm Cement plaster on the rough side of single or half brick wall of mix:
1 : 6 ( 1 cement : 6 fine sand) INTERNAL PLASTER --15MMM ON WALL '15 mm cement plaster on the rough side of single or half brick wall of mix : '1:6 (1 cement : 6 fine sand)
6MM CEMENT PLASTER 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
INTERIOR FINISHING - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer ON CEILING SAME AS CEILING PLASTER
Painting with oil type wood preservative of approved brand and
manufacture on old work (one or more coats)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
Two or more coats on new work
Carriages for material (Cement, Sand, Aggregate, & Bricks)
Carriage of Cement average 50 KM
Carriage of Sand average 25 KM
Carriage of Aggregate average 40 Km
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.92 MB
BOQ_980313.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid