REPAIR TO CEILING PLASTER, CHAJJA PLINTH PROTECTION WATER PROOFING TREATMENT AND OTHER MISC WORK IN AGE BR II UNDER GE NORTH BIKANER AT MIL STATION BIKANER

Amount

Dismantling of Roof tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.

Demolition of lime concrete of any description over roof slab complete all as specified as directed by Engr-in-charge

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

Demolition of cement concrete in ground floor and paving not exc. 15cm thickness (below or above GL)

Demolition of reinfoced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work .

Demolition of brick work built in cement mortar including all quions arches pillars etc

Taking down cement plaster on brick or stone walls incl. raking out joints hacking for key scrubbing down with water etc.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

Disconnecting existing tanks, setting aside (or lowering if required) for repairs,nexc 500 ltrs cleaning, etc. and hoisting if required reconnecting and re-fixing in position incl cleaning , float valve if reqd.

Disconnecting existing water tanks exc 500 ltrs and n exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position incl cleaning float valve if reqd.

Removing up rooting vegitation growth building roof top/sides of walls nexc. 30 cm girth including and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50 cm and clearing site and making good of the disturbed surfaces in brick work cm 1:4 and plaster in 1:4 ,surfacearea nexc 0.50 sqm.(Note: For removal of vegitation if reqd at site rain water pipes bends to be removed preserved and refixed in the same location.)

Taking down or up, 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer -in-charge.

Taking down or up, 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer -in-charge.

Dismantling timber scantling under 40 sqcm in section in any position in fillets, rails, posts, rafters, purlins, and the works of the like nature under 40 sq. cm in section.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately)

Roughing surfaces of old conc surfaces by picking up , sweeping,cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @3kg/Sqm including

M&L for 15mm thick cement screed CM (1:4) finished , surfaces even and smooth without using extra cement ,mixed with water proofing compound as per manufacturer's instruction (WPC shall be measured and paid separatley)

Applying evenly a tack coat of industrial bitumen 85/25 ,1.2kg/sqm incl cleaning surface.

M&L for polythene film black 50micron laid in floors or on vertical surfaces incl necessary laps and laid without vides/ air bubles as per direction of engr in charge.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified

M&L for lime concrete terracing as on roof with mimimum thickness of edge 40 mm and increasing uniformly towards ridge to obtain a certain chain slope of (1:40) as described in para 11.27.2 of MES SSR part-I complete. NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used.

M&L for 40mm thick Brick tiles bedded in 15 mm thick cement and sand mortar (1:6) and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.

All as per item No -23 here in before but except tiles.

M&L PCC 1:2:4 Type B1 as in mass conc or bedding layer to provide levelling course of varying thickness as reqd at site .

Providing precast cement concrete louvres and jallies, 40mm thick, set and jointed in CM, 1:4 (mea sured solid), including all mould complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L for hardcore of gauge nexc 63mm , deposited , spread and levelled in layers nex 15cm thick watered and rammed to a true surface

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M&L for RCC M-25(Design Mix)n as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, stairs deck slabs and in shelves and the like

M&L for RCC M-25(Design Mix) as in chajjas

M&L for TMT bars Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All as per item No. 32 here in before but 6mm to 8mm dia

All as per item No. 32 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L Use & Waste to formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.for rough finished surfaces.

M&L Use & Waste to formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)for rough finished surfaces.

M&L Use & Waste to formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

M&l for brick work with sub class B (old size) bricks Fly Ash, straight or curved on plan exc 6m mean radius, built in CM 1:4.

All as per serial item No. 38 here-in-before but except bricks.

M&L for Vitrified Ceramic colour (dark shade) tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15mm thick screed in CM 1:6 complete all as specified and as directed.

All as per item no 40 here in before but in skirting /dado over 10mm thick rendering in CM 1:4.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work , finished surfaces even and smooth without using extra cement all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on other than fair faces of brick work finished surfaces even and smooth without using extra cement all as specified and directed.

M&L for rendering 10mm thick in CM (1:4) on ceiling finished surfaces even and smooth without using extra cement all as specified and directed.

Supply only liquid water proofing compound Dr.Fixit or equilent ISI marked..

S&F 110mm PVC pipe dia soil waste & vent pipes in any length with or without ears, with cement joints laid in trenches or in floors.

S&F 75mm PVC pipe dia soil waste & vent pipes in any length with or without ears, with cement joints laid in trenches or in floors.

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres, two layered , ISI marked (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge

All as per item no 48 above but of Capacity 1000 Ltrs.

Fixing only rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge

All as per item No. 50 above but of Capacity 1000 Ltrs.

S&F in repairs ball valve, 20mm bore, high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair. Make : Prayag or equivalent.

Fixing only ball valve high pressure of PTMT/Brass any bore.

S&F repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Fixing only stop valves, cast copper alloy,any type any size.

S&F in repairs Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15mm complete all as specified and directed by Engineer-in-charge.

Refixing 15 mm old G I tubing incl short lengths and connections in new or old position (Walls, ceiling, floors, etc.)

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20mm complete all as specified.

Refixing 20 mm bore old G I tubing and connections incl short lengths in new or old position (Walls, ceiling, floors, etc.)

S&F 15 mm bore 150 mm long tank nipple with and including checknut and washer as reqd at site .

S&F 20 mm bore 150 mm long tank nipple with and including checknut and washer as reqd at site .

Cutting chases,pinning in making good to facing where requried and pointing in cement mortar 1:3 to ends or edge of landings,steps,cills,sunshade,shelves, lintel etc. tubes or concealed conduit etc. and making good, cutting exc 10 cm but not exc 20 cm girth all as specified and directed.

M&L PVC(SWR) bends of bore 100/ 110mm.

M&L PVC(SWR) bends of bore 75/ 80mm.

M& L PCC 1:2:4 Type B0 (12.5 mm graded aggregate as in coloumns , bed plates,mud stops , copings, kerbs incl weathering , slightly rounded or chamfered angles etc

M&L for sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified and directed.

M&L for flush pointing in cement mortar 1:3 on ceiling surfaces incluing raking out old pointed joints of stone patti roofs complete

M&L applying injuction grouting with nozzle on slab. The mortal can be applied from a minimum of 15mm to 40mm thickness in smaller vertical pockets and upto 25mm thickness in horizontal applications. The Mortal should have a minimum compressive strength 12N/mm2 in 1 Day and 45N/mm2 in 28 days , minimum flexural strength should be 8N/mm2 in 28 days. (Sikkon/Dr Fixit/Fosroc).

M&L repair of cracks, corner with cement mixed with water proofing compound in the ratio of 1:1. Water proofing compound . (Dr Fixit URP - 301)/Sikka/Forsoc)

M&L applying two coats pidifin coat including mixing of liquid agent and dry powder . (Pidifin 2K no 112 ) on wall.( Dr Fixit /Sikka)

M&L Heavy duty reinforced acrylic coating for terrace/walls water proofing (Make Dr Fix It ,Asian, Sikka) over a coat of Primmer for Sealer coat (Dr fix it) with roller as directed and app by Eng-in-Charge.

M&L self adhesive membrane 1.5mm thick self adhesive elastomeric SBS (Styrene Butadiene Styrene) bitumen based membrane with high density aluminum film on top ,provded with Pibial /Emufal TE Bitumen primmer @0.3 ltr per sqm , mimimum over laps shall be 50mm on sides and 100 mm on end laps.(As directed by Eng-in-charge).(Make : Sika,IWL as app by Eng-in-charge)

Cutting sand stone slab of thicknes up to 50mm as in chajja etc in a shape as directed by Engr in charge, giving good appearance to Bldg /chajja ( exposed portion only).

M&L for preparation to new plastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for one coat cement base paint on old plastered or un plastered surfaces including preparation of surfaces.

M&L for incl preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

All as per item no 77 here in before but one coat on old surface.

M&L for incl preparation of new plastered surfaces of wall and applying three coats of white washcomplete all as specified and as directed.

M&L for incl preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

S & F framed work such as grills, framed guard bars barred iron doors, ladders framed balusters railing and similar works confirming to FE 410-0 0r Fe 310-0

All as per item No 61 here in before but necessary fabrication and fixing only.

M&L for incl preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed.

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

All as per item No 84 here in before one coat on old decorated surfaces.

durga construction company

GS BUILDERS AND ENGINEERS

ALPHA ENGINEERING COMPANY

NARAYAN SINGH NARENDRA SINGH AND COMPANY