PD/NWMM/03/21-22

Amount

Taking down cement plaster from existing RCC wall(horizontal and/or vertical and/or slanted surfaces ) of any description including , hacking for key , scrubbing down with water etc and preparing surfaces to receive cement mortar screed including removal of rubbish out side India gate complex .

Material and Labour 20 mm thick screed bed (or bedding layer) in cement and sand mortar 1:4 for receiving tiling etc

Material and labour for rendering 15 mm thick in cement and sand mortar 1:4 on concrete surface complete all as specified and as directed by Engr in Charge.for receiving tiling etc

Material and Labour for 20 mm thick LAKHA RED polished granite tiles (of approved quality to match with existing adajcent work ) , machine cut (radial cutting), in size and shape as ordered to match with adajacent work , bedded and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of granite stone including grinding and polishing complete Note:- (i) The bedding layer or screed shall be measured and paid for separately under appropriate item of this BOQ. (ii). Work to be executed in existing tyagchakra wall radial in shape & rate inclusive of cutting of stone to required shape and design to accomodate on radial wall of tyagchakra. ( Nothibg extra admissable) (iii) . Necessary wedging to be used in granite stone at end side of gap. ( Nothibg extra admissable) (iv ) Necessary pasting using araldite shall be provided whereever technically required ( Nothibg extra admissable)

Material and Labour 30mm thick LAKHA RED polished granite tiles (of approved quality to match with existing adajcent work ) , machine cut (radial cutting), in size and shape as ordered to match with adajacent work having paper joint and to be fixed with SS clamp grade-304 and 10 mm fastener ( 2 nos in each Granite tile). Note :(ii). Work to be executed in existing tyagchakra wall radial in shape & rate inclusive of cutting of stone to required shape and design to accomodate on radial wall of tyagchakra. ( Nothibg extra admissable) (iii) . Necessary wedging to be used in granite stone at end side of gap. ( Nothibg extra admissable) (iv ) Necessary pasting using araldite shall be provided whereever technically required ( Nothibg extra admissable)

M& L Providing one coat of BETONCRYLL PIGMENTATO special, coloured, high coverage, acrylic protective paint over concrete surfaces with dust pickup resistant properties over and including NEOKRYLL transparent, acrylic fixative, exterior grade complete all as specified and as directed by Engr in Charge. ( Material make = M/S OIKOS LTD or equivalent as approved by PD )

Disconnecting existing electric connection and taking out serviceable light fitting of following description and refixing the same in location where directed incl drilling holes in granite plus wall and providing new connection wire ( The light fitting shall be deposited to custody of JE E/M where ordered at India Gate Complex and shall be collected from JE E/M for refixing when civil work completed ) (a) Lamp Type : 7 Watt LED (b) Fixture Wattage : 7 Watt (c) Lumen Efficacy : 130 Lumens / Watt (d) CCT / CRI : 3000 K / + 80 (e) Optical Distribution : 650 Distribution (f) Voltage : 24 V DC (g) Type of Control Gear : Non-Integral Electronic Driver (h) Control Type : Dimmable (j) I.P. Rating : IP-66 (k) Size : Dia 60 mm, Height 70 mm or of the size as approved by Engineer-in-Charge. Housing box , Gel filling and driver complete with gel connector if ordered in writing by PD shall be replaced and paid at supply only rates in below items 8,9,and 10

Supply only housing box

Supply only gel filling in driver

supply only driver complete with gel connector

Supplying, Installing, Testing and Commissioning Exterior Recessed Built into Platform, 60 mm dia 7 W LED wide distribution uplight fixture with Housing Box of Stainless Steel, clear / frosted glass optics, with D.C. power supply, installation cover and other necessary accessories with and including 7 W LED lamp suitable for the fixture and also including the mounting and fixing accessories and arrangements and also complying with the following requirements / specifications all as specified and as directed by Engineer-in-Charg (a) Lamp Type : 7 Watt LED (b) Fixture Wattage : 7 Watt (c) Lumen Efficacy : 130 Lumens / Watt (d) CCT / CRI : 3000 K / + 80 (e) Optical Distribution : 650 Distribution (f) Voltage : 24 V DC (g) Type of Control Gear : Non-Integral Electronic Driver (h) Control Type : Dimmable (j) I.P. Rating : IP-66 (k) Size : Dia 60 mm, Height 70 mm or of the size as approved by Engineer-in-Charge. (l) Make of Fixture & Lamp : Aldbara / Havells / Bajaj / Philips / Delta as approved by Engineer-in-Charge Note : - (a) The rate quoted shall be deemed to include for providing the light fixture complete with lamps of the same manufacturer / make as approved by the Engineer-in-Charge. (b) The rate quoted shall also be deemed to include for material and labour and all other incidental charges required for fixing and mounting arrangements for the fixture including recessing and other civil works as per manufacturer's design and specifications and requirements and also as per site conditions as approved by Engineer-in-Charge.

Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.

amtoindia

SUNSHINE MARBLES A DIVISION OF ANURODH BUILDERS PVT. LTD.