Construction of town hall at sirohi under CM Budget Announcement

Amount

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S Exterior Grade including cost of aluminium framing for cladding, adhesive, Joint filler, adhesive of approved quality and as per direction of EIC. 6.0 mm thick.

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others 3 MP Dome Camera off make CP Plus/Honeywell others

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others 3 MP Bullet Camera off make CP Plus/Honeywell others

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others 16 channel NVR off make CP Plus/Honeywell others

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others HDD ( sata 2 TB each) off make WDD/Seagate

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others 32" / 40" LED Professional Panel off approved make

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others 18 U, 1U, Single-sided horizontal Cable manager, finger-duct style off make APW/Rittal/Netrack

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others Secure 8 port poe switch 8+2

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others RJ-45 Connector

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others HDMI Cable

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others Camera Installation Charges

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others Feruling & Continuity Testing of both end

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others Labelling of I/O (at W/S End/Patch End)

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others Erection/Dressing of patch cords (UTP)

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others Installation of patch panel

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others Installation of rack with all the accessories

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others Installation of Cable manager

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others Coxial Cable Laying

4-pair, Cat6 (500 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG,UTP Cable (305 mt. Roll), Meets or exceeds ANSI/TIA-568- C.2 off make R&M/Molex/Amp, others Internal Acrylic Signage With Printing

Supplying, Installation, Testing & Commissioning of Local Fire authrity approved Electric Driven Main fire pump for Sprinkler / Hydrant applications suitable for automatic operation and consisting of following details given as A, B, C, D, E, F and G . (A) Horizontal Single / Multi stage Centrifugal End suction, back pull type pump complete for delivery of below mentioned discharge , with necessary Butterfly valve on the suction side ( all items to be matching with the suction side dia of the pump) and pressure gauge ,Butterfly valve and non return valve on the delivery side side ( all items to be matching with the delivery side dia of the pump) and including bypass arrangement for Testing of pump. (B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal. (C)Pump shall be capable of furnishing not less than 150 % of rated capacity at a head not less than 65 % of the rated head. The shut off head shall not exceed 120 % of rated head. (D) Squirrel cage induction motor suitable for 3 phase, 415 V, 50 HZ, Ac supply 2900 / 1450 RPM T.E.F.C confirming to IP:55 , of required HP suitable for the above pump ,along with flexible coupling , coupling guard complete in all respect . ( E) Common bed plate fabricated from mild steel channel for installation of pump and Motor. (F) Pump is to be inspected by third party like RITES / PDIL at manufacturer's premises and inspection report is to be submitted. (G) Suitable cement concreat foundation duly plastered with anti vibration pads. 2280 LPM suitable for 70 Mtr Head, single stage, 2900 RPM

SITC of Local fire authority approved Horizontal single stage Jockey pump with CI Body, Bronze impellor, SS shaft, mechanical seal coupled with Squirrel cage induction motor for automatic operation suitable for three phase, 415 V, 50 Hz AC supply with synchronous speed of 2900 RPM ,T.E.F.C type confirming to IP:55 with flexible coupling and coupling guard with the pump ,Common bed plate fabricated from mild steel channel , Suitable cement concreat foundation duly plastered with anti vibration pads.--------180 LPM suitable for 70 Mtr

SITC of Local fire authority approved single stage Centrifugal End suction, back pull type Terrrace pump with Bronze impellor, SS shaft, mechanical seal coupled with Squirrel cage induction motor for automatic operation suitable for three phase, 415 V, 50 Hz AC supply ,T.E.F.C type confirming to IP:55 with flexible coupling and coupling guard with the pump ,Common bed plate fabricated from mild steel channel , Suitable cement concreat foundation duly plastered with anti vibration pads.along with suitable rating Control panel as per rating of Motor including 4 pole MCCB, automatic star delta starter, Single phase Preventor , overload protection rely, contactors, MCBs , interlocking wiring , ferruling etc complete in all respect. 450 LPM with 35 mtr head

(d) System controller to control Operation Main Electric pumps, Diesel pump, jockey pump in sequence as per specs. Consisting of relays, timers, sensors, annuciation window for fault indication.

SITC of pressure switches for Main, Jockey, Terrace pump and standby Diesel pumps, including necessary wiring upto control panel and Ball valve.

Providing & fixing 100mm dia bourden type, Stainless steel dial type pressure Gauge (0 - 16 Kg ) range, 3 / 8 " BSP bottom entry on Pump Delivery Line complete with Ball valve

Providing & fixing vane typewater flow switches with contacts for installation in 50 mm to 150 mm dia M.S. pipe for a service pressure up to 20 Kg / Sq.cm

Providing, laying, testing & Commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 25 mm dia

Providing, laying, testing & Commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 65 mm dia

Providing, laying, testing & Commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same.------80 mm dia

Providing, laying, testing & Commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same.-----100 mm dia

Supplying and fixing first -Aid hose reel wall mounted swinging type with MS construction spray painted in post office Red, conforming to IS 884 with upto date amendments, complete with the following as required.(A) 30 m long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Type -2 as per IS: 12585 (B)20 mm (nominal internal) dia gun metal globe valve & nozzle. (C)Drum and brackets for fixing the equipments on wall. (D)Connections from riser with 40 mm dia stop valve (gun metal) & M.S. pipe

Supplying and fixing Fire Brigade Connection of CI body with Gun Metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required of following way : 2 Way

Supplying and fixing of Hose Cabinet of size 750 mm x 600 mm x 250 mm made of 1.6 mm thick MS sheet with 6 mm thick glazed glass doors including necessary locking arrangement suitable to accommodate external hydrant with butterfly valve, 2 Nos 15 Mtr. Long Hose pipe, 1 No. branch pipe, mounted on wall OR raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant, as required.

Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia male and female Stainless steel couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required.

Supplying & fixing 63 mm dia stainless steel IS : 3444 Gr. - 1 branch pipe with 20 mm (nominal internal diameter) size Gun metal nozzle confoming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required

Supplying and fixing Stainless steel IS:3444 Grade - 1 single headed Internal / external yard hydrant valve with 1 No. 63 mm dia instantaneous Stainless steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal cap and chain as required.

Supplying and fixing Stainless steel IS:3444 Grade - 1 single headed Internal / external yard hydrant valve with 1 No. 63 mm dia instantaneous Stainless steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal cap and chain as required. Installation Charges

1.SEAT REST ASSEMBLY: The seat rest assembly is 1.2 cm thk. hot pressed plywood in-situ moulded with polyurethane foam & upholstered with 3 layered foam laminated fabric and injection moulded cover. The seat is auto tip-up type and folds when not in use. The Seat profile is developed to help the users to get necessary comfort in popliteal region. SEAT SIZE: 45.0 cm. (W) x 48.5 cm (D) x 14.5 cm (T) Approx. . 2.BACKREST ASSEMBLY: The backrest assembly is made up of 1.2 cm thk hot pressed plywood upholstered with 3 layered foam laminated fabric and injection moulded back cover. The back foam is designed with contoured lumbar support for extra comfort. *BACK SIZE: 47.5 cm. (W) x 80.0 cm (H) x 12.5 cm (T) Approx. 3.POLYURETHANE FOAM: The polyurethane foam for Seat and Back is moulded with Density = 48 +/- 2kgs/cu.m. 4.LEG FRAME ASSEMBLY: The leg frame assy is fabricated from M.S. tube 6 cm x 4 cm x 0.2cm thk. welded with grouting member. It is black powder coated & grouted to the floor using mechanical anchors. 5.ARMREST ASSEMBLY: It consists of the following: a) P.U. ARMREST: The armrest is made up of black integral skin Polyurethane with 65+/-10 Shore 'A' hardness and reinforced with M.S. insert fixed with leg frame. The armrests are scratch and weather resistant. b)ARMREST CLADDING: The armrest cladding is made up of 9mm particle board & upholstered with fabric. 6. POWDER COATING: All steel components are Epoxy Polyester Powder Coated. 7. UPHOLSTERY FABRIC: The 3 layered foam laminated fabric is Require

Providing & supplying of luxury range of sofas with a frame material used of kiln dried wood, the seat foam is made up of slab stock foam used as a supporting material having a foam density of 34kg/cum. The back foam slab made of slab stock foam with recon fill at back and arms with a density of 34 kf/cum and the webbing material used is S spring along with nylon strips. Note : Size may be varied +/-5% ------1 Seater Sofa of Dimensions 850 mm Width , 750 MM Height and 800 MM Depth , Seat Height should be 410 MM Entrance Foyer Guest Lobby

Providing & supplying of luxury range of sofas with a frame material used of kiln dried wood, the seat foam is made up of slab stock foam used as a supporting material having a foam density of 34kg/cum. The back foam slab made of slab stock foam with recon fill at back and arms with a density of 34 kf/cum and the webbing material used is S spring along with nylon strips. Note : Size may be varied +/-5% ------2 Seater Sofa of Dimensions 1320 MM Width , 750 MM Heitht and 800 mm Depth, Seat Height should be 410 MM Entrance Foyer Back Stage Guest Lobby

Providing Table having all the necessary arrangement for keyboard, wire manager etc. as per drawing.Table Top : The table top of size 1500 x 750mm(WxD) would be made out of 3.3mm thick PVC- Marble Composite sheet over Plyboard 19mm thick with FR5030 Composite profile on the sides as required. Front as per design and drawing with PVC-Marble composite panel over Plywwod / Ply board. Internal faces of all Plyboard / Plywood shall be laminated my mica. The vertical structure shal be erected by Ply board and a drawer shall be fixed on the channels complete in all respect, as per direction and drawings provided by the Engineer-in-Charge.

Providing Table having all the necessary arrangement for keyboard, wire manager etc. as per drawing.Table Top : The table top of size 1800 x 900mm(WxD) would be made out of 3.3mm thick PVC- Marble Composite sheet over Plyboard 19mm thick with FR5030 Composite profile on the sides as required. Front as per design and drawing with PVC-Marble composite panel over Plywwod / Ply board. Internal faces of all Plyboard / Plywood shall be laminated my mica. The vertical structure shal be erected by Ply board and a drawer shall be fixed on the channels complete in all respect, as per direction and drawings provided by the Engineer-in-Charge.

Providing the Conference Table having all the necessary arrangement for keyboard, wire manager etc. as per drawing.Table Top : The table top of size 3000 x 1200mm(WxD) would be made out of 3.3mm thick PVC- Marble Composite sheet over Plyboard 19mm thick with FR6021 and SK12012 Composite profile on the sides as required. Front as per design and drawing with PVC-Marble composite panel over Plywwod / Ply board. Internal faces of all Plyboard / Plywood shall be laminated my mica. The vertical structure shal be erected by Ply board and a drawer shall be fixed on the channels complete in all respect, as per direction and drawings provided by the Engineer-in-Charge.

Providing Wooden Wardrobe having all the necessary arrangement. The Box of wardrobe shall be made of 19mm plywood. The outer Panel shall be made out of 3.3mm thick PVC- Marble Composite sheet over Plyboard 19mm thick Front as per design. Internal faces of all Plyboard / Plywood shall be laminated my mica. The vertical structure shal be erected by Ply board and a drawer shall be fixed on the channels complete in all respect, as per direction and drawings provided by the Engineer-in-Charge. Make Up Rooms Back Rooms Office

False Ceiling Providing and fixing of false ceiling by PVC-Marble Composite sheet of 3.3mm thick of Italian marble print over 12mm Ply / 19mm Ply Board as per requirement fixed on the MS / Wooden hanging structure with required screws and adhesion as per manufacturer specification. The intermediate hanging structure is fixed to the roof from the top with the help of ceiling angles/wire grid or any other method to hold effectively the hanging structure. Necessary cutouts for electric connections, lighting, air conditioning etc, shall be provided at required place. The perimeter edge shall be of PVC-Marble profile IC11427 complete as per manufacturer’s specification and drawings and direction of Engineer-in-charge. As per architectutral Drawing. Entrance Foyer In the main Hall

Providing and fixing of 12.5 mm thick GR Gypsum board as per design drawings on the framework made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating 120 as per IS: 277 and consisting of angle cleats of size 25 mm X 1.6 mm with flanges of 22 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fasteners 12.5 mm dia 40 mm long with 6 mm dia bolts or suitable M.S. clamps made up of M.S. flats of 30 X 5 mm to be fixed to tie members of truss all having nut and bolt arrangement to the angle hangers of 25 X 19 X 0.5 mm of required length and other end of angle hanger being fixed with nut and bolts to G.I. channels 45 X 15 X 0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64 mm dia 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long , the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive screws @ 230 mm interval including joining and fixing to a flush finish, finishing with recommended filler, paper tapes, finisher and two coats of primer as per manufacturers specifications. Main Hall Entrance Foyer Exit Passage Small Lobby Guest Room

Providing and fixing of the 4MM acoustical flooring having an STC value of 15 dB with edge welding. Make Bolon, Grabo Floor Steps Foyer

Providing and fixing of 100x18 mm Steam beach wood klin seasoned chemically treated planks with tongue & groove joints. Steam beach planks to be of minimum length 1200mm. The Steam beach wood planks to be fixed over two staggered layers of 12 mm marine commercial ply of approved make like Century, Duro ,Green, Merino fixed to Sal wood frame work of 50 x50 mm at 600 mm centre to centre both ways. The Sal wood shall be kiln seasoned and chemically treated. The framework to be jointed with mathani cut method. The sal wood frame work to be treated with two coats of fire retarder primer FR881 undiluted @ 3.5 sq.m per ltr. The framework to be supported on 100 x 100 x 5mm neoprene pads which are held in position by35x35x4 mm angle cleats of 100mm length at 1800 mm centers. The framework to be filled with 25 mm thick thermal bonded polyester wadding mikron fiber of 800 gm/sqm mikron fiber. The mikron fiber shall be of Mikasha International or equivalent company as approved by Engineer-in-charge. The cleats to be given two or more coats of red oxide primer. wood floor Stage

Providing & fixing of 20mm thk wood wool acoustical tiles over the suspension grid having a density of 400 kg/ cum over the existing suspension grid. The tiles to be given 2 coats of black enamel paint. Complete as per drawing ,specification and direction of Engineer-in-charge. Main Hall Long Wall Main Hall Back Wall Front Stage Wall

Providing and fixing of Inherently fire retardant fabric (CS TRAVERA) panel (colour as approved by the consultant) glued to 25mm thick melamine foam ( BASF, Germany) over a 12 mm marine ply fixed over a framework of 48mm GI Stud of .55mm thk gypsteel ultra @ 600c/c vertically & 1200c/c horizontally fixed in GI floor channel fixed at floor bottom & top RCC Slab. The marine ply to have perforations as per design drawings. The foam to be backed with 50mm 1000GSM thermal bonded non woven polyester wadding . The fabric to be fixed with means of UPVC grippers. The rate includes for all Geometry of wall, openings etc. and for complete item including all the required approved material, labour and fixing as per drawings The work shall be executed as per specification and at all heights and as per direction of Engineer-in-charge. Main Hall Long Wall Main Hall Back Wall Front Stage Wall

Providing and fixing of 75 x15 mm MAPLE wood slats at an air gap of 15mm fixed @ 90mm c/c backed with viola cloth fixed over a framework of 48mm GI Stud of .55mm thk gypsteel @ 600c/c. The framework to be filled with 50mm thick thermal bonded non woven polyester wadding micron fiber of 1000 gm / sqm . The mikron fiber to be held in position with chicken mesh of 18mm & 24SWG. The mikron fiber shall be of Mikasha International The framework to be supported on the wall at a distance of 1800 mm centre to centre of size as reqd long 35x35x3mm angle cleats of required length and MS anchor fasteners of size 65mm x10mm dia. The cleats to be given two or more coats of red oxide primer.The entire work to be executed as per the drawings / instructions of the Engineer-in-charge. The rate includes for all Geometry of wall, openings etc. and for complete item including all the required approved material, labour and fixing as per drawings enclosed. The work shall be executed as per specification , & instructions of engineer in charge. Melamine polish on the slats to be payable separately in item no item no 4.0 A of Part A. Main Hall Long Wall Main Hall Back Wall

Providing and fixing of 12 mm MDF jali perforations to be as per design drawings backed with viola cloth fixed over a framework of 48mm GI Stud of .55mm thk gypsteel @ 600c/c. The framework to be filled with 50mm thick thermal bonded non woven polyester wadding micron fiber of 1000gm/sqm. The mikron fiber to be held in position with chicken mesh of 18mm & 24SWG. The mikron fiber shall be of Mikasha International The framework to be supported on the wall at a distance of 1800 mm centre to centre of size as reqd long 35x35x3mm angle cleats of required length and MS anchor fasteners of size 65mm x10mm dia. The cleats to be given two or more coats of red oxide primer. The entire work to be executed as per the drawings / instructions of the Engineer-in-charge. The rate includes for all Geometry of wall, openings etc. and for complete item including all the required approved material, labour and fixing as per drawings enclosed. The work shall be executed as per specification , & instructions of engineer in charge. Including cost of Duco paint of desired shade on the jali.. Main Hall Long Wall Main Hall Back Wall Front Stage Wall

Providing and fixing of wall paneling by PVC-Marble Composite sheet of 3.3mm thick of Italian marble print over PVC panel 300x8 mm fixed on the existing wall with required screws as per manufacturer specification. Necessary cutouts for electrical connection to be provided at required places complete as per manufacture’s specification and direction of Engineer-in-charge. Using FR 6021, IC11427, FR15039 and other Profiles as per architectural drawings. On the Side Walls Back Wall

Providing and fixing of Column paneling by PVC-Marble Composite sheet of 3.3mm thick of Italian marble print over PVC panel 300x8 mm fixed on the existing wall with required screws as per manufacturer specification. Necessary cutouts for electrical connection to be provided at required places complete as per manufacture’s specification and direction of Engineer-in-charge. Using FR 6021, IC11427, FR15039 and other Profiles as per architectural drawings Foyer Column Entry Column

P/f of MS suspension grid providing and fixing MS angle rafters above acting area of stage at 1200x600mm centers, 2 x 40x40x4mm thick. MS angle runners & 25x12x12mm thick studs as MS spacers fixed @ 600mmc/c sandwiched between the MS angle runners so as to maintain 12mm gap between MS angle . The grid so formed to be suspended from bottom of roof structure by means of 35 x 5mm thick. MS flat suspenders, fixed with MS cleats & dash fasteners at RCC slab & nuts & bolts at 1200mm centers to the grid. Painting MS suspension grid & suspenders with 2 coats of redoxide primer and 2 or more coats of enamel paint of approved shade.

Providing & Fixing Entry/exit doors for the auditorium 60 mnts rating Fire cum acoustic doors consisting of fire resistant materials & peripherial seals all around . The door to be laminated with 1mm laminate. The Door shutter frames to be of klin dried chemically treated Mirandi wood. The door shutter frame to be lapped with 12mm com ply duly treated for fire retardance. Make : Global/ Navair/ Noisecon Note: contractor to submit shop drawing as per site & manufacturer choosen for approval of consultant before fixing) Main Hall Exit Doors Staircase Entrance Doors Side Exit

Providing and fixing panic bars for the doors with double/single leaf with all necessary parts. Lockable from outside only.

Providing and fixing handles of D shape 450mm size brush steel finish

Providing and fixing of mortice latch for locking from outside .

S & F Steel railing of steel grade 304 made of top side of 50 mm diameter of 16 gauge & three pipes of 19 MM diameter of 16 gauge and vertical pipes of 50 mm diameter of 16 gauge 900 mm c/c complete mat finish. Main Hall Staircase Entrance Exit Stairs

Providing and fixing of wall paper with adhesive as per approved design and make including cleaning the surface by wire brush of filling uneven surface by putties etc. complete including scaffolding complete Entrance Foyer Side Walls Front Wall

Supplying, installation, testing & commissioning of 9-10 watt 3000K mirror light all accessories i/c connections with 3 x 1.5 sq.mm PVC insulated FR copper conductor cable etc. as reqd. (Make:- Wipro/ Philips/ bajaj/havells)

Supply, Installation, Testing & Commissioning of LED Light power consumption not more than 26W Recessed Mounted Circular Downlighter suitable for DALI Dimming made of pressure die cast aluminum housing with high transitivity reflector, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, CCT 5500 to 6500, CRI >80, PF >0.95 & THD<10%, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.0 KV. The fixture design should comply with IS10322, EMC/EMI compliance maintaining driver leakage current as per as per IEC 60598,Minimum system Lumens 2200. LED Downlight must comply UGR Values <22 for general operations etc. complete as required. Similar to Philips DN395B LED20S PSD. Make Philips/ Wipro/Oshram/Trilux/Havells

SITC of Relay 12 channel relay Module designed to control any type of switched load and Outputs 12 x Switched feed thru outputs at 10A or more nductive)Supported wiring schemes: • Single Phase and Neutral • Three Phase and Neutral (Star) Maximum Device Load 180A Philips Dyanalite DDRC 1220FR-GL/Havells/Lutron

SITC of 6 button User Interface with Field effect technology The user interface detects an approaching user and ‘wakes up’, initiating a wall-wash lighting effect to encourage interaction. to control all lighting and programmable presets with built in proximity sensor worked at supply 12-24Vdc, SELV/Class 2, max. 40mA from the DyNet network with a Control Inputs RS 485 DyNet serial port contains all the sensors and indicators which are enclosed by a rubber membrane to give an IP22 rating Philips Dyanalite PABPE-WW-X //Havells/Lutron

SITC of Communication Module essential backend perpherals for programming of user interface Philips Dynalite DACM-V2/Havells/Lutron

SITC of Network Gateway which provides cost- effective serial port integration between a DyNet network and third- party systems at Ambient temperature range 0 to +50 °C Philips Dynalite DDNG232/Havells/Lutron

Commisioning Cost of Lighting Control System complete with necessary training to client Staff.

Providing, Fixing, of Photo luminescent Self charge EXIT Sign boards of approximate size 12" x 6" with LED Emergency Light with 3 hours battery BackupThe colour combination and letter size shall be in accordance with IS: 9457-1980, IS: 12349-1988 of Glow Lite ,Technoware,EATON,ABB.

H SCHEDULE DX System Outdoor Unit Only Providing and fixing of air cooled machine (only outdoor unit) with each having a capacity as mentioned below suitable for operation on Green refrigerant comprising of scroll/screw type compressor hemetically sealed complete with automatic capacity, safety switches, lubrication system, squirrel cage induction motor suitable fbr operation on 415 ± l0% volts 50 HZ " A.C. supply and microprossor based control panel complete with accessories, machine isolation, valve and accessories to inter connect compressor and condenser including pressure testing , vaccummizing, necessary starters suitable for compressor motor complete with O/L relay ,U/V, O/V, Incomer MCB, single phase preventers etc complete as required. (Main incomming 3.5 C power supply with double earthing shall be provided by another agency). Makes : Daikin Mcquay/ Blue Star/ Hitachi / Voltas / Carrier 5.5 TR Capacity

AIR HANDLING UNITS Providing and fixing of double skin modular construction 43±2mm thick PUF panels with Thermal break, draw through Ceiling Suspended (CS) / Floor Mounted (FM) Air Handling Units with mixing box, each complete with DIDW Centrifugal fan, Squirrel cage, TEFC induction motor, 6 RD DX cooling coils (Copper tubes and Aluminium fins), pre-filter (Washable Synthetic fibre of efficiency 90% down to 20 micron), Sandwitch type drain pan of 20 gauge, SS - 304 inner sheet, 12 mm thick insulation and outer cover should be G. I. with S S drain socket, V belt drive and other accessories as per specifications. Motor shall be suitable for 415 ± 10% volts, 50 cycle, 3 Phase AC supply. The RPM of AHU should be less than 900 and blower discharge face velocity should not cross 10 FPS and all AHU should be single blower, make of blower is Nikotra/Kruger. The details of AHU's are as indicated below: Makes : Zeco/ Edgetech/ Carrier/ Ravi aircon CFM Type SP Phase Coil Circuit 6600 CS/FM 50 3 3

PUSH BUTTON STATION FOR AHU'S Providing and fixing of wall mounted Push Button Station for AHU's from starter panels to Push Button station complete with PVC Conduting, ON and Off push buttons with lights. M.S. Box. Makes : Scheinder/ L&T/ABB/SIEMENS

CONTROLLER KIT Providing and fixing of controller kit complete with thermostatic expansion valve, dryer, liquid line valves including thermostat, for connections as required as under. 'Make : Danfoss/ Honeywell/ Emerson For 5.5 Tr circuit

REFERIGERANT PIPING Providing and fixing of Interconnecting refrigerant pipe work with closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications including chase cutting, supports etc as required 22.225 mm

DRAIN PIPING Providing and fixing in position the following PVC pipes of 10 kg rating cut to required lengths and installed with all joints and providing and fixing in position with the necessary unions, elbows, tees and reducers complete with 9 mm thick insulation sleeves Make : Supreme/ Prince/Prince 25 mm dia

G. I. DAMPER Providing and fixing of 20 gauge G. I. Damper with brass bushes and 6" pitch, multiblade box type Galvanized Sheet Steel construction volume control damper for AHU discharge and Ducting to be provided with suitable links and quadrants for control of volume of air as per specifications. Make : Air Track/ Sphere Equipments/ Carrieair/ Balance air Cool

DUCTS ACOUSTIC LINING Supply and fixing of Open cell Acoustic lining inside the ducts complete with 1 layer of 12 mm thick acosound sheet with adhesive as required. Of Makes : Supreme/ A-flex/ Accoflex/ Armaflex

FLEXIBLE CONNECTION (Canvas) Providing and fixing of the flexible connections constructed out of fire retardant double canvas connection as per the requirement. Air Handling Units

AHU STARTER PANEL Electrical starter of required raitings for AHU complete with on/off the air handling unit with incomer MCB, DOL starter with contactor & overload relay, single phase preventer, on/off push botton, on/off indication light, ammeter, sheet steel encloser & compatible for BMS as required for different AHU motors rating from 3.0 HP to 5 HP.

DUCT INSULATION Supply & fixing of cross linked closed cell (XLPE) insulation sheet on duct including cost of adhesive complete as per specification and as required. 13mm thick with 0.38mm aluminium cladding for outside duct having accoustic insulation inside

Supply & fixing of cross linked closed cell (XLPE) insulation sheet on duct including cost of adhesive complete as per specification and as required. 19mm thick thick with 0.38mm aluminium cladding for outside duct having accoustic insulation inside

Wall Opening Providing and Making wall openings in brick wall complete with providing lintel of required strength, repairing, plastering and cleaning the site debries as required.

Supply installation testing and commisioning of flying single 18" arrayble subwoofer with same footprints as Main Speaker for Arraying in the same frame, having a Freq. Range (-10 dB) of 28 Hz - 650Hz & Freq. Response1 (-3 dB): 35 Hz - 100 kHz or better. It should have an axial Sensitivity of >=99dB (1W/1m) or more delivering a Max. Calculated SPL of >=131 dB.The loudspeaker should have a nominal impedence :8ohm and continuous Power Handling of <=400W continous & a minimum of 25 M10 suspension points. Make:- EV /JBL/ Bose / Tannoy

Supply installation testing and commisioning of flying ,Line arrayble Full Size 12", 2 Way, bi-ampable speaker . The speaker cabinet must have HF Transducer of 2 in diaphragm compression driver, frequency range of 50 Hz – 19 kHz or better; Frequency Response (-3 dB): 60 Hz – 16 kHz, Axial Sensitivity >= 97 dB (1W/1m), delviering Max. Calculated SPL >= 129 dB with continuous passive power handling 500W or more. The speaker should have a nominal impedance of 8 ohm .The speaker cabinet should have a Rotatable Coverage: 90° x 55° or better for better far and near field experiance.Speaker must have 20 or more suspension points for permanenet installation with OEM make bracket only. EV /JBL/ Bose/ Tannoy

Supply installation testing and commisioning of of 12" two-way ,self-powered monitor speakere having frequency range :58 Hz - 18 kHz or better ,maximum calculated SPL125 db or above ,coverage angle(HxV):90x50 with ,output:1000W.The loudspeaker should have monitor angle on enclosure for use as stage monitors. Make:- EV / Bose / JBL/Martin Audio /Behringer

Supply, Installation, Testing & Commissioning of Single 8" two-Way full range speaker with Rotatable Horn with a Frequency range (-10dB):-48hz-20khz or better & Frequency Response(-3dB):- 60Hz-18Khz or better & Long Term Power Handling of>=200W (at Nominal Impedance of 8ohms). The Loudspeaker should have a Sensitivity(1W/1m) of 94dB with a Max. SPL of >119 dB. Dispersion should be 90 by 50 Degrees or better. Make :- EV / Bose / JBL /Turbosound

Supply, Installation, Testing & Commissioning of Single 5" Cabinet Speaker with frequency response of (-3db) 85Hz-20Khz and frequency response (-10db) 60Hz-20Khz or better with sensitivity of 90db , Max SPL 109db (110db peak), covering angle of Horizontal 90 degree and Vertical 90 degree, Power handling of 75W (300 W Peak) Continuous with nominal impdence of 8 ohm and minimum impedence of 6 ohm in all respect. Make:-EV / Bose / JBL/Behringer

Supply , Installation, Testing and Comissioning of 2 channel power amplifier with inbuilt DSP (Crossover, Eq, Delay, Limiting) Stable Max Midband Output Power >= 2 x (1800-2100W) @ 4 Ω,Frequency Response, ref. 1 KHz: 10Hz - 21 KHz (±1dB), THD:<0.05%, Max input level >= +21 dBu, input impedence:20 kΩ, Signal to Noise ratio > = 104 dB, Crosstalk < -80 dB with built in protection such as Audio limiters, high temperature, DC, HF,Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay . Make:- EV / Crown / Bose/Labgruppen

Supply , Installation, Testing and Comissioning of 2 channel power amplifier with inbuilt DSP (Crossover, Eq, Delay, Limiting) Stable Max Midband Output Power >= 2 x (850-1200W) @ 4 Ω,Frequency Response, ref. 1 KHz: 10Hz - 21 KHz (±1dB), THD:<0.05%, Max input level >= +21 dBu, input impedence:20 kΩ, Signal to Noise ratio > = 104 dB, Crosstalk < -80 dB with built in protection such as Audio limiters, high temperature, DC, HF,Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay . Make:- EV / Crown / Bose/Labgruppen

Supply installation testing and commisioning of 16 channel Compact Mixing System (12 x Mic/Line + 4 x Mic/Stereo-Line), Auxiliarys (MON, FX, AUX) : 2 Pre, 2 Post, 2 Pre/Post switchable, Frequency Response, -3 dB, ref. 1 kHz : 15 Hz to 65 kHz, Crosstalk, 1 kHz Channel to Channel < -80 dB, THD at 1 kHz < 0.005%, CMRR MIC input 1 kHz > 80 dB, Dual stereo 24/48-bit multi effects processors, 100 Factory + 20 User, Tap-Delay, Digital Audio Interface Channels : 4 In / 4 Out, AD/DA Conversion, Sampling Rate : 24-bit, 44.1 / 48 / 88.2 / 96 kHz Makes: Yamaha/Soundcarft/Dynacor/Behringer

Supply installation testing and commisioning of Dynamic Cardioid/supercardioid Vocal Microphone with Freq. Response : 30 Hz - 15,000 Hz or better, Sensitivity : 2.2 mV/pascal,Impedance: 200 ohms .Make:- Shure / Senheiser / AKG / Electro-Voice

Supply installation testing and commisioning of condenser Cardioid/Supercardioid Instrumental Microphone with Freq. Response : 50 Hz - 16,000 Hz or better, Sensitivity : 6 mV/pascal, Impedance: 600 ohms .Make:- Shure / Senheiser / AKG / Electro-Voice

Supply, Installation, Testing & Commissioning of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 40Hz-15kHz or better,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A, Programmable mue button, distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz . Make:- Shure / Senheiser / BeyerDynamic/ AKG/ Electro-Voice

Supply, Installation, Testing & Commissioning of Wireless Lapel Mic with Cardiod polar pattern for transmitter , Receiver & Transmitter frequency response 45Hz-15kHz or better,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 5.6 mV/Pa,modulation:+/-40kHz .Make :- Shure / Senheiser / BeyerDynamic / AKG / Electro-voice

Supply & Fixing of XLR Connectors (for connecting speakers & mikes with amplifier)

Supply & Fixing of SPEAKON Connectors (for connecting speakers & mikes with amplifier). Make:- Neutric/ MX / Crystal

Supply & Laying of 2 Core X 2.5 Sqmm Cable for Speakers with related conduits / fittings / termination,etc Make:-Finolex / Polycab / Belden / Kramer/ sircco

Supply & Laying of 2 Core X 4 Sqmm Cable for Speakers with related conduits / fittings / termination,etc Make:-Finolex / Polycab / Belden / Kramer/ sircco

Supply & Laying of 2 Core Shielded Cable for connectings Microphones with related conduits / fittings / termination, etc. Make:- Belden/. Kramer / Crystal / Deepcab / sircco

Supply, Installation, Testing & Commissioning of 15-Pin HD, HDMI & Stereo Audio Passive Wall Plate with EDID PassThru - Passes EDID signals from source to display Make:- Extron/Creston/Kramer

Supply, Installation, Testing & Commissioning of One HDMI input Four Output distribution amplifier for 4K@60Hz (4:2:0) HDMI 2.0 signals complying with the HDCP 1.4 content protection standard with maximum Data Rate — 10.2Gbps and Max. Resolution — 4K@60Hz with HDMI Signal Transmission with I–EDIDPro facility. Approved makes: Extron / Crestron / Kramer

Supply & Laying of 6 feet HDMI male to male cable 4K support.Make:- Extron/Creston/Kramer

Supply & Laying of 19.5 Mtrs HDMI male to male cable 4K support.Make:- Extron/Creston/Kramer

Supply & Laying of 6 feet HDMI VGA & Audio male to male cable 4K support.Make:- Extron/Creston/Kramer

Supply & Laying of 19.5 feet HDMI VGA & Audio male to male cable 4K support.Make:- Extron/Creston/Kramer

Supply & Laying of Shielded Outdoor Type Twised Pair Cable along with Mettalic Connectors. Make:-Molex/Kramer/Cristron

Supply & Installation of wooden podium as per site requirement with required shelfs & drawers

Supply, Istallation, Testing and Commissioning of Biparting Main curtain made out of velvet with horizontal sliding arrangement complete with pre fabricated , zinc passivated modular curtain Rail, fixing brackets, single and master trolley & Motorised operation complete with 4mm steel wire rope, Min. 0.75HP motor(Crompton / Havells / Siemens ). The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900 mm and should be stitched in double gathering with masking frill of same cloth as per site requirement, 500 mm drop from proscenium. Make:- (Falcon/Canara/Stagecraft)

Supply, Istallation, Testing and Commissioning of Making of cyclorama structure for tht stage by fixing 35X35X4 MS amgle on the wall wiyh MS angle hold fasts screwed to the walls and 50 mm dia MS pipe welded to it 50 mm dia MS pipe with the help of required MS materials and painting complete size 30'X18' Complete with matt white PVC Screen with eyelet. M Services (Make:- Da-lite, Suvira, Winger)

Suppling fitting and fixing ornamental scallop made up with velvet cloth and decorative lace for to be fixed in front of main curtain ( 40' long 3 wide ) and on both side there will be a hanging portion approx 5.5' to 6.5' long

Supply, Istallation, Testing and Commissioning of MS suspension grid providing and fixing MS angles rafters above full area of atage at 600 mm X 600mm centre , 2x50x50x5 mm thick MS angle runners and 25X12X12 mm thick studs as per as MS spacers sandwiched between MS angle and runners so as to maintain 12mm gap between , MS angles suspended from truss by means of 35X5mm thick MS flat.suspenders fixed with MS cleats and desh fasteners at truss and nuts and bolts at required space. painting MS suspension grid with 2 coats of enamel paint of approved shade.

Supply, Istallation, Testing and Commissioning of 1800X600mm light ladder for fixing lights made of 50mm dis MS pipe.

Suppling fitting and fixing lighting bars with 50mm GI pipe along with other fixing materials complete ( fixed type )

Supply, Istallation, Testing and Commissioning of average frills made out from black glazed cotton cloth suspended from overhead 32 mm dia GI pipe along with fixing materials complete.

Supply, Istallation, Testing and Commissioning of 6mm commercial grade ply, MS hollow square pipe 50X25 mm vertically placed at 600 mm apart in frame work covered with black glazed cotton cloth and screwed to mechanical moving systemand finally hanged with the help of required MS angle with existing grid complete.

Supply, Istallation, Testing and Commissioning of Par- 64, 1000w , 240volt shielded beam colour, temperature 3200k Base metal matt black finish with sufficient ventilation, with 1 mtr , 3 core wire, plug, Clamps,etc. Make: Falcon/ CANARA/ Martin/ SGM/ Elation

STIC of Profile spot 26degrees 750w HPL Lamp with Rated power up to 750w dichroic reflector. Tool-free lamp position adjustment, insulated & safe rear handle, Rugged and aluminium die - cast construction, Power 220v/ 50Hz, Lamp 220vHPL750w G9.5,Color temperature 3200K,15amp plug & Top,IRIS. Make: Falcon/ CANARA/ Martin/ SGM/ Elation

Supply, Istallation, Testing and Commissioning of Plano Convex spot light 1000W 230V/240V Lens Type 150mm dia, pebble- convex, Reflector 100mm dia. Aluminium, Colour Gel Dimension 185x185mm, Throw 2- 17m, Beam angle 10 degree-65 degree complete with lamp etc complete as required.Make: Falcon/ CANARA/ Martin/ SGM/ Elation

Supply & Installation of Halogen floods 1000w brandoor type with halogen tube, Reflector Aluminium Anodized finish,Color Black,Housing CRC sheet metal Holder 2 Nos.RTS/RX7S with silver tip contact.2,mtr 3 core copper wire 3 pin plug top.Make: Falcon/ CANARA/ Martin/ SGM/ Elation

Supply & Installation of LED Long Bar pixel control Cyclorama Flood light fitting Input Voltage : AC100V~AC240V, 50/60Hz. Power Consumption : 200W. Lamp Specifications :18 pcs four in one (RGBW) high- efficiency 10W LED, rated life 50000 hours;the fixture to have BIS registeration.Make: Falcon/ CANARA/ Martin/ SGM/ Elation

Supply & Installation of LED Par 18 Leds, 10 watt led , RGBW with preset functions with 25* lens angle.Make: Falcon/ CANARA/ Martin/ SGM/ Elation

Supply, Istallation, Testing and Commissioning of Universal DMX controller able to control upto 40 units. Each unit with maximun of 36 channels. Total of 512 DMX channel. Able to controller dimmer pack with maximum of 192 channels. Make: Falcon/ CANARA/ Martin/ SGM/ Elation.

Supply, Istallation, Testing and Commissioning of Stage light Points : Light point wiring from patch panel on one side of stage wall to various stage light fixtures with 2.5 sqmm 3 core PVC insulated and PVC sheathed ISI mark cable of suitable size including drop length from light bar to stage floor.Includes MS box approximate size 8" x 5 " with plate and ISI mark 15 Amp. socket and top for each light.Include heavy gauge MS welded Conduit , 1.6 mm thick as required. Make: Custom

Supply, Istallation, Testing and Commissioning of DMX Cable with 18 AWG ‐24/0.20mm x 2 core ATC Copper Conductor, PVC Insulated, 90 % ATC Copper Braid Shielded, PVC Sheathed control Cable. Make: Krystal/Falcon/Belden

Supplying and fixing of following ways surface/ recess mounting, 415 V,8 way TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.

Supply, Istallation, Testing and Commissioning of 8 Channel DMX Splitter with one DMX input and 8 buffered outputs and 3pin XLR connectors etc. complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Falcon/ CANARA/ Martin/ SGM/ Elation

Supply, Istallation, Testing and Commissioning of Fresenal spot light 1000W 230V/240V Lens Type 150mm dia, pebble- convex, Reflector 100mm dia. Aluminium, Colour Gel Dimension 185x185mm, Throw 2- 17m, Beam angle 10 degree-65 degree complete with lamp etc complete as required.Make: Falcon/ CANARA/ Martin/ SGM/ Elation

Supply, Installation, Testing and Commissioning of Projector with 7500 ISO lumens or more capacity, 3 LCD Display technology, with native resolution 1920*1200 WUXGA or more with solid state laser illumination, estimated life 20,000 hrs or more (normal mode), motoeized zoom & focus, HDMI*2 & HDbase T*1 , Computer & RCA connector *1 Video input and 3.5 mm stereo input and HDMIout*1, monitor &audio output control via RS-232C, RJ45port*1, wired remote controlin/out, 3.5 mm mono connector*1, HD BaseT*1, supplied with IR remote control complete with ceiling mount structure. Approved Makes:- Christie/Barco/Digital Projection

Supply, Installation, Testing & Commissioning of HDMI & Control twisted pair/ Hdbase T receiver, 4K resolution support, Input: 1x RJ 45, Output: 1x HDMI, 1x Controls (RS232/IR) distance support of 70mtrs or more for reception of audio, video, control & power with feature of De-embededs audio. Should be compatible to the multiformat transmitter or Scaling Matrix Switcher. Approved Make:- Extron/Crestron/Kramer/AMX

Supply, Installation, Testing & Commissioning of HDMI & Control twisted pair/ Hdbase T Transmitter, 4K resolution support, Input: 1x RJ 45, Output: 1x HDMI, 1x Controls (RS232/IR) distance support of 70mtrs or more for reception of audio, video, control & power with feature of De-embededs audio. Should be compatible to the multiformat transmitter or Scaling Matrix Switcher. Approved Make:- Extron/Crestron/Kramer/AMX

Supply, Installation, Testing & Commissioning of tilt up lid, powder coated box along with HDMI/VGA cable for stage monitor output. Make Extron/Crestron/Kramer/AMX

Supply & Laying of .5 Mtrs HDMI male to male cable 4K support. Make:- Extron/Creston/Kramer/AMX

Supply, Installation, Testing & Commissioning of FM Metal Connector (specifically designed for tool less connection for CAT6A U/FTP / Outdoor cabling system, can be usable for multiple times) required for both end connectivity to take care for Data connectivity as well as Power for the cameras, The FM connector shall be used for earth connectivity at both end Approved makes: AMP/ Molex/ Penduit/ R&M/ Legrand

M.S. RAHUL CONSTRUCTION

M.S. RAHUL CONSTRUCTION