zone-01 ward-94 ke antaragt Snagam Lal Traiha se Lic Chuarha tak HMP Dwara Sadak Ka Sudhar Ka Karya

Non-Sor-F31122-Non SOR-Table Top Speed Breker-- P/L dense graded bituminious macadam (DGBM) ith 60-90 TPH batch type HMP producing an average output of 75 tones per . P/L dense graded bituminious macadam (DGBM) ith 60-90 TPH batch type HMP producing an average output of 75 tones per .-Rate-14885.00 per 1 Cum.

Non-Sor-F31123-Non SOR-Table Top Speed Breker-- Prov./ laying bitumious concrete (BC) with computrised HMP type hot mix plant producing an averge output of 75 tonnes per hour crushed aggregates of specifited Prov./ laying bitumious concrete (BC) with computrised HMP type hotproducing an averge output of 75 tonnes per hour crushed aggregates of specifited-Rate-16272.00 per 1 Cum.

Non-Sor-F31060-Non SOR-Providing and laying hot applied thermoplastic compound 5 mm thick reflectorising glass beads@ 500gms pe sqm area. Thicness of 5mm is exclusive of surface opplied glass beads as per IRC 35 the finised suurface to the level, uniform and free from atreaks and holes (Thermoplastic repeated bar marking) Providing and laying hot applied thermoplastic compound 5 mm thick reflectorising glass beads@ 500gms pe sqm area. Thicness of 5mm is exclusive of surface opplied glass beads as per IRC 35 the finised suurface to the level, uniform and free from atreaks and holes (Thermoplastic repeated bar marking)-Rate-1220.00 per 1 Sqm. 75

MORTH804.6 (8.35)- Suggestiv-F31095-Non SOR-Solar Power road marker (Solar Studs) The solar studs shall be made of Aluminiu alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13.635 kg tested in accordance with ASTM D4280. Its colour may be white, red, yellow, green or blue or combination as directed by the Engineer Its water resistance shall meet the requirements of IP 65 in accordance with IS.12063:1987 category 2 for protection against water ingress.The dimensions of solar studs shall not be less than 100 mm X 100 mm x 10 mm, It shall have super bright LEDs so as to provide long visibility froma distance of more than 800 m. Its flashing rate shall not be less than 1 Hz Its should be able to give the prescribed performance in the temperrature range of 40°C to +55°C. Its life shall be not less than 3 Years. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Solar Power road marker (Solar Studs) The solar studs shall be made of Aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13.635 kg tested in accordance with ASTM D4280. Its colour may be white, red, yellow, green or blue or combination as directed by the Engineer Its water resistance shall meet the requirements of IP 65 in accordance with IS.12063:1987 category 2 for protection against water ingress.The dimensions of solar studs shall not be less than 100 mm X 100 mm x 10 mm, It shall have super bright LEDs so as to provide long visibility froma distance of more than 800 m. Its flashing rate shall not be less than 1 Hz Its should be able to give the prescribed performance in the temperrature range of 40°C to +55°C. Its life shall be not less than 3 Years. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge.-Rate-2695.00 per 1 nos. 85

18@ gst