Detail of DNIT restoration of pond No-3 water bodies near Reliance land of village Mohammad Pur Jharsa ward No.-24 Zone No 1 Gurugram

Amount

NS Item

Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm bushy in big size HDPE bag.

Supply and satcking of Bougainvilea (variety Butiana, Lady Mary Baring, Mahara, Mohan, Scrarlet Queen, Varigata, etc. 60-75 cm

Providing Plumeria alba of plants height 165-180 cm with 3-4 branches and thick stem in big size HDPE bags

providing and laying grit wash

(10271) Providing and stacking Cassia fistula (Amaltash) of plants height 120-135 in big poly bags of plants size 25 cm C22

(10343) Providing and stacking Terminalia arjuna (Arjun) plants height 150-165 cm in big poly bags of plants size 25 cm

"Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the G.I pipes are 40 mm dia and 2.5 mm thick all G.I pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of G.I pipes are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company like SKF to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of G.I pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc." The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liability period free of cost to full satisfaction of engineer in charge complete in all respect.

-Providing and fixing precast concrete benches L shape base support in grey cement thickness 100mm back height 1000mm front 450mm . Size 1500x100x50mm

Legestromia indica in 13"x13" poly bag, well grown

Supply and stacking of plants Kaner dwarf Red 1'½'' ht, 8''polybag, spread1' well grown

Hamelia patents cement bag

Supply and stacking of plants Tecomagaudichaudi 2'ht, 8''polybag, spread1' well grown

Providing Bismarkia Palm 115 to 180 cm ht. plant well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot

Chandini variegated in cement bag well grown

(10287) Providing Ficus infectoria (Pilkhan) tree of plants height 150-165 cm in big polybag of plants size 25 cm.

(i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel & frieze uniformly grinded spray primered, spray painted with P.U Paints. (iii ) 3 No. cast iron/frp base panel railing with frame Floral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.U Paint in required shade. (iv) One set of top frame with Double Finishing FRP Molded Plastic Sheet roof Top frame in m.s tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 4 mm thick with top & bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contain FRP Moulded Ball of 14”Dia x 2mm thick at the central top for its beautification. Each sheet enamel painted in red color. Each such sheet properly riveted to horizontal sheets. The complete item is fitting at site with installation. (Including fixing at site and supervision & transportation & all type taxes with defect liability period of 2 years free of cost.

Bottle palm with clear stem 3', ht. 7'-8'

Calendera 3'ht well grown

(10262) Providing and stacking Bauhinia blakeana (kachnaar) plants height 120-150 cm in big poly bags of plants size 25 cm

Arm and Shoulder Wheel:- Providing, and fixing Arm and Shoulder Wheel of size 130 X '1200 X 1350 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the G.I pipes are 40mm dia and 2.5 mm thick all G.I pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel c equivalent of 80-120 micron thick. All welding joints of G.I pipes are robotic welded with joints scalloped as necessary an dressed off removing sharp edges and burrs. Zinc prime paint to be applied at all welding points prior to finish ink Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and resistant environmental friendly. Bearing used shall be maintenance free , duly oiled sealed and self lubricated made by reputed company like SKF to be approved by Officer -in-Charge Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of G.I pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M2: nd J shaped welded bolts and once the concrete is set, ft ;he equipment on to it and cover nuts and bolts with the base Mate cover, all complete as per direction and approval of -2,engineer-in-Charge regarding material, shape of equipment colour on metal, seat and base cover plate and fixing of equipment etc. The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liability period free of cost to full satisfaction of engineer in charge complete in all respect.

Euphorbia milli well grown

Bidder Name

Amount

TANUJ AGARWAL CONTRACTOR(GSTN-06AJXPA6452A1ZD)

M/s Sami Greenmax Landscape Pvt. Ltd.(GSTN-06AAPCS4484A1Z9)

M/s Sami Greenmax Landscape Pvt. Ltd.

M/s Sami Greenmax Landscape Pvt. Ltd.